Portal - BI, sapdp00 not reached, WSAECONNREFUSED: Connection refused
Hello,
I have a problem with the connection between portal 7.0 and bi 7.0. I want to logon into the bi over the portal.
The bi and the portal are on the same host. It´s an ABAP + Java installation.
1. I created the connection in the portal
System Administration -> System Configuration -> SLD
I chose New -> System (from PAR) -> SAP_R3_Dedicated
Then I gave follow parameters:
Application Host: http://
I hope anyone can help me to solve the problem.
Thanks a lot!
Marcel
I tryed some other constellations betwen Portal and BI.
In the first post both systems are on the same server.
s1 = server 1, s2 = server 2
1. try
BI = s1
Portal = s1
browser = s1
result = it works
2. try
BI = s1
Portal = s1
browser = s2 (or an other PC)
result doesn´t work
3. try
I have a second portal on an other server
BI = s1
Portal = s2
browser = s2 (or an other PC)
result doesn´t work
4. try
the second portal but the browser on the server with the bi
BI = s1
Portal = s2
browser = s1
result = it works
Similar Messages
-
After installation getting error(sapdp00: not reached)
Hi everyone,
I installed the Netweaver sp12 ABAP trial version on my system. I have windows XP as OS. The installation was error free and I my system is not connected to any network. I created NSP local and configured as in the html file start.html. But when I try to log in using this NSP local I get an error message that says sapdp00: not reached. I dont know what to do now. maybe some problem in configuring the loop back adapter or somr other network issue. It would be a great help if someone can help me out.
The actual error message :
partner '127.0.0.1:sapdp00' not reached
WSAECONNREFUSED: Connection refused
Regards,
Mayank
Edited by: Mayank Vatsal on Mar 12, 2008 5:23 AM> an error that says Win+disp.exe has encountered a problem and needs to close down..
Yaiks, that sounds as if Windows is killing the services as soon as they're started. Maybe the SAP software is interfering with some other program(s) on your PC and that could be a very difficult one to find. -
SAP GUI720 error 10061. Partenr 'sapdev:sapdp00' not reached
Hi all,
The problem is I cannot connect and log on via SAPGUI.
I am very new to SAP. I have just managed to install SAP ECC6.0 on my laptop running server 2008 service pack2. It created another user account "IDSAdmin" itself when the installation finished. Everey thing (SAP ECC, Oracle, Java) is 64 bit.
But the GUI is 32 bit and after installation when I tried to connect some error comes up. Error details are
partner sapdev:sapdp00' not reached
Time: ....................
component NI(network Interface)
Release 720
Version 40
Module nixxi.cpp
Line 3255
Method Nipconnect2:192.168.25.25:3200
system call connect
Error No 10061
Error text WSAECONNREFUSED:Connect refused
Counter 1
Please help me to log on. I want learn SAP very desperately. Please help.
i checked online for thi problem but couldn't find any solution that I understood. services file has the 3600/TCP entry. I dont know how to check sap whether its running or not???? Please please help.
Edited by: bilal_zain on Mar 8, 2012 2:39 AMDear Bilal,
Please check the SAP Management Console whether SAP Server is up and running or not.
Refer to http://help.sap.com/saphelp_nw70/helpdata/en/8b/6e1e48c00711d2890d0000e8200722/content.htm
Please try to ping the server and update the host file entry with server ip address and host name. Now please check it again.
Best Regards
Arun Jaiswal -
Connect to message server host failed;WSAECONNREFUSED: Connection refused
Hi All,
I am getting the following error when I tried to test the system connectivity from the portal to NSP instance.
Connection failed. Make sure that Single Sign-On is configured correctly
I found the following entry in the logs
Error> occured >Wed Feb 03 22:43:49,875<
RfcException:
message: Connect to message server host failed
Connect_PM TYPE=B MSHOST=abchome.abcsap.local GROUP=SPACE R3NAME=NSP MSSERV=sapmsNSP PCS=1
ERROR partner '192.xxx.xxx.123:sapmsNSP' not reached
TIME Wed Feb 03 22:43:49 2010
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -10
MODULE nixxi.cpp
LINE 2823
DETAIL NiPConnect2
SYSTEM CALL connect
ERRNO 10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER 1
Return code: RFC_FAILURE(1)
error group: 102
key: RFC_ERROR_COMMUNICATION
Both NSP and J2E instances are on the same server. OS - win2k3.
I checked the services file and have the sapmsNSP entry.
I am able to launch an SAP transaction from System Administration -> Support
RZ70 from NSP also fails JCo error. SLD_UC RFC itself works fine and the JCo RFC provider SLD_UC program is running
WEB AS & ITS connections work fine.
User authentication is from backend, NSP.
I think I have gone thru all the logs but could not resolve the issue.
I appreciate any help on this,
VictorI tried to go thru the thread. I did not find any clue as why only server connectivity is failing. ABAP trial version is running fine and the NW trial version is working fine too. These run without crashing. I did a lot of customizing on the portal but dont see any issues except the System Connectivity. Like I mentioned I did UME configuration to point to NSP ABAP instance and I can log into the portal with user credentials that I use to login to ABAP. I can launch webgui etc without any issues.
-
SAP Logon GUI - WSAECONNREFUSED: Connection refused
I try to connect to the Application Server (IP Address), System Number (00) and System ID (APC) but get the following error:
Sapgui 710 [Build 9003] Tue Sep 08 06:24:47 2009
: 'partner '10.0.103.217:sapdp00' not reached
Time Tue Sep 08 06:24:45 2009
Component NI (network interface)
Release 710
Version 39
Module nixxi.cpp
Line 3142
Method NiPConnect2: 10.0.103.217:3200
Return Code -10
System Call connect
Error No 10061
Error Text WSAECONNREFUSED: Connection refused
Counter 1Hi Chris / Dalma,
The issue is with the C:\Windows\System32\drivers\etc\services entries.
Do add your samps<SID> port/TCP entris.
also the all relevant entries.
sapdp00 3200/tcp
This should resolve the issue.
also Do verify your instance number and maintain the right Instance number in SAP GUI. Let us know if this helps.
Regards,
Ram -
Dear All,
We installed SAP 7.0, in windows 2003 server
Due to power maintenance schedule, we shutdown the machine. Then restart of my server after 5 Hours.
while SAP login following error shows. "sapdp00" not reached. WSAECONNREFUSED connection refused.
Any one help me to resolve this issue.Thankx Mr. Dey. for your valuable answer.
My problem resolved by following your query from our Corporate Helpline. -
Random "WSAECONNREFUSED: Connection refused" error
hello,
we're connecting to sap using logon groups and randomly we get this error
<i>TmConnect2: handle = 0
sncname = []
set snc-mode OFF TmISncSetOptions: set tm_mode for 0 to TM_SNC_OFF
disp service: sapdp00
TmIGetName: no DISPLAY set
NiMyHostName: hostname = 'APP006-2'
terminal name: APP006-2
connect to dispatcher on host /H/127.0.0.1/S/3201
RouteString </H/127.0.0.1/S/3201>
service in route <3201> != servname param <sapdp00>
NiIGetServNo: servicename '3201' = port 3201
NiICreateHandle: hdl 3 state NI_INITIAL_CON
NiIInitSocket: set default settings for new hdl 3/sock 1144 (I4; ST)
NiIBlockMode: set blockmode for hdl 3 FALSE
NiITraceByteOrder: CPU byte order: little endian, reverse network, low val .. high val
Wed Sep 26 16:59:12 2007
***LOG Q0I=> NiPConnect2: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 2985]
ERROR => NiPConnect2: SiPeekPendConn failed for hdl 3/sock 1144
(SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:3201) [nixxi.cpp 2985]
NiICloseHandle: closing initial hdl 3
ERROR => TmIConnect: NiConnect (rc=-10) [dpxxtm.c 934]
TM_LAYER TmConnect <<
TmErrSet: socket invalid (-1)Wed Sep 26 17:00:52 2007
NiICreateHandle: hdl 4 state NI_INITIAL_CON
NiIInitSocket: set default settings for new hdl 4/sock 1624 (I4; DG)
NiDgHdlCreate: state of hdl 4 NI_DG_UNCONNECTED
NiHsLGetNodeAddr: got hostname 'localhost' from operation system
NiIGetNodeAddr: hostname 'localhost' = addr 127.0.0.1
NiDgHdlSendTo: hdl 4 sent 1 of 1 bytes to 127.0.0.1:0
NiICloseHandle: shutdown and close hdl 4/sock 1624
NiIExit: free nitab 0C0AF150
TmThrExit: free local resources
TmExit: free local resources</i>
i can't figure why sap gui is trying to connect to 127.0.0.1 ???
and after a while it works without any modification... very strange no? but annoying!
if i do not use logon group and connect directly it works but it is not what i need to do.
any idea?
regardshello,
thanks but configuration of logon groups is very straightforward...
my logon group contains my two application servers.
what else do i have to check?
regards -
WSAECONNREFUSED: Connection refused
i am trying to access my newly installed system after i have performed a client copy and it gives the following error
partner not reached (host 192.167.1.3, service sapdp03)
WSAECONNREFUSED: Connection refused
here is the detailed error log
Time: Tue Apr 17 12:19:48 2007
Component: NI (network interface)
Release 640
version 37
Module nixxi_r.cpp
Line NiPConnect2
Return Code -10
System Call SiPeekPendConn
Error No 10061
Error Text WSAECONNREFUSED: Connection refused
Counter 1Hi..
i strongly beleive , After a client copy you are not able to connect sounds, You oraarch directory is full and database is not accepting any incoming requests from application. (or) Dispatcher is stopped.
if you are sure - you have done no changes on server end except using SAPGUI i.e. client copy - The only reason i feel - ORAARCH is FULL.
if it is not the reason
======
can you ping the server ?? if yes
As ora<SID> user Check - is db is up or not ??
As ora<SID> user Check - listener status ??
As <SID>adm user check - "R3trans -d" what is the return code ??
if return code is 0 no issues with DB connection ??
if return code other than "0" enclose trans.log file (it will be created in directory where "R3trans -d" executed.
also enclose dev_disp trace file from work directory.
if this answers - Please mark it as answered.
Regrds
PR -
ERRNO TEXT WSAECONNREFUSED: Connection refused
Hi,
I am facing a problem with sap gui 6.4. I cant connect to sap server with sap gui it return a error connection refused and partner not reached. It just suddenly show this error today but before this it work fine. The server is working fine.Hi,
First ping ypur server and see if it is possible.
in run type ping <ip>of your server> -t.
If this works
Put the IP of the server instead of server name in the Application server tab of the logon settings.
If the ping do not works pl check out for network problems.
Hv a look at Note 545177 - FAQ: Preliminary steps in analyzing RFC connections
Pl revert if unresolved or award suitably if resolved.
Regards -
Outbound Mail not being accepted: connection refused
For some reason yet to be determined I none of the users in our local network can send mail. Everything was working finne the other day then all of a sudden, one by one, all users lost the ability to send mail externally.
The SMTP error log was reporting a relay access error for users the I enabled the Login Authentication for SMTP and the messages seemded to be going through. But the messages now are not leaving the server apparently. Even though the mail clients send the message successfully, the messages are not making it out of the server.
Here is my postconf -n:
always_bcc =
command_directory = /usr/sbin
config_directory = /etc/postfix
daemon_directory = /usr/libexec/postfix
debugpeerlevel = 2
enableserveroptions = yes
inet_interfaces = all
luser_relay =
mail_owner = postfix
mailbox_transport = cyrus
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
mapsrbldomains =
messagesizelimit = 20971520
mydestination = $myhostname,localhost.$mydomain,saintmichaelschool.org,mail1.saintmichaelschool .org,192.168.181.2
mydomain_fallback = localhost
myhostname = mail.saintmichaelschool.org
mynetworks = 127.0.0.0/8
mynetworks_style = host
newaliases_path = /usr/bin/newaliases
queue_directory = /private/var/spool/postfix
readme_directory = /usr/share/doc/postfix
relayhost = mail1.saintmichaelschool.org
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = postdrop
smtpdclientrestrictions =
smtpdenforcetls = no
smtpdpw_server_securityoptions = login
smtpdrecipientrestrictions = permitsasl_authenticated,permit_mynetworks,reject_unauthdestination,permit
smtpdsasl_authenable = yes
smtpdtls_certfile = /etc/postfix/server.pem
smtpdtlsloglevel = 0
smtpduse_pwserver = yes
smtpdusetls = no
unknownlocal_recipient_rejectcode = 450
I'm obviously a novice with mail servers so any hepl is greatly appriciated.
Here is a line from my SMTP log from the sample message I'm trying to send:
Feb 16 11:19:46 mail postfix/smtp[18133]: AEF07178F4F: to=<[email protected]>, relay=none, delay=3897, status=deferred (connect to mail1.saintmichaelschool.org[65.173.83.122]: Connection refused)I had a dig around google on the postfix 502 error and found one reference which stated that ...
Permanent Errors
These indicate a permanent error and tell the sending system to bounce the message:
502 Command not implemented
http://www.answers.com/topic/simple-mail-transfer-protocol
If this is the case then the 502 error I got when telneting in would we taken as a final failure notice and they would not bother retrying, as I did.
I've no idea why it would be giving this error. Unless someone else can chip in with more info... ?
You can check for the error by connecting from a remote location by telnet...
======================================
In Terminal, type: "telnet mail1.saintmichaelschool.org 25"
there is a space beteen your hostname and last "25". This tells Telnet to connect on SMTP port 25.
You should get a response:
Trying... x.x.x.x....
Connected to.... dah de dah... your.server.name ESMTP Postfix
Type: "MAIL FROM: [email protected]" where [email protected] is any email address
Response: 250 ok
Type: "RCPT TO: [email protected]" where [email protected] is the recipient in your domain
Response: 250 ok
Type: "DATA"
Response: 354 End data with... dah de dah...
Type a message and finish it with a "." (period) on a line by itself.
Response: OK: queued as... dah,de,dah.
Type "QUIT" to exit
===========================
I was getting the 502 error immediately after the Mail From command. If I repeated it, it was accepted OK. However, it looks like a sending server does not try repeating it.
Good luck!
-david -
Partner'ides6:sapdp00' not reached
Hi,
I need some help please,
i installed SAP ECC v6.0 SR3 IDES Oracle 10.2.0.2 , The installation was good, including the SAPGUI. ,
my first logged in was ok , and i shut down my pc , after some while i opened it again , try to log in , i had this message
Please help
ahmedHi Ahmed,
After analysis you're getting error
SQL error 12571: 'ORA-12571: TNS:packet writer failure'
C *** ERROR => Error 12571 in stmt_fetch() from oci_execute_stmt(), orpc=0
For the issue kindly follow SAP Note 534729 - Oracle errors due to network problems
and SCN doc at [Oracle] A short SQL*Net research or how-to drill down network related ORA errors
Hope this will help you.
Regards,
Gaurav -
After portal copy "connection refused" for SAP transactions
Hi.
We made a system copy of Portal and executed all follow up tasks.
We already changed systems alias properties and tested connections.
All is working except SAP transactions functionality.
When we try to use, we always get message:
patner '10.0.0.132:sapdp00' not reached.
WSAECONNREFUSED: Connection refused.
Curious thing is: the system we are trying to reach use system number 10 (not 00).
We look for this parameter value in every part, on portal configuration, and all seems to be perfect.
We are without options, and we don't know what is missing/wrong.
May anyone help us to find this solution?
Best regards.
VreeswijkHi,
From portal on which backend system you are running transaction and Is portal able to reach that system ?
Thanks
Sunny -
I am a beginner on SAP R/3 .
my laptop configuration is: windows xp média center
1.86Ghz 1G de Ram 80G de HDD.
I have installed all those thing -Full download includes SAPGUI (2 files 1.5GB, 1.25GB)
-Download SAPGUI only! (342 MB)
- Installation Guide (PDF 1.32 MB)
my laptop is not connected to a Lan;when I try to launch my first connexion on
sap with a user account I have the following message:
erreur:sapgui640
partner not reached(host 127.0.0.1 service sapdp00)
wsaeconnrefused:connection refused
thanks in advance for your helpHi,
Have you installed MS Loopback Adapter? If not do so. You need it, if you are not connected to a LAN. For instructions how to install and cofigure it have a look at install help which is included in the dowload.
Regards
Daniel -
Sapgui640 partner not reached (host127.0.0.1service sapdp00)
hi everybody,I really need a help.I am a beginner on SAP world;
my laptop settings:
-microsoft Win XP Média center Edition ver2002-service Pack2
-packardbell centrino-intel 1.86ghz 1Go de Ram
SAP LOGON640
designation:NSP
application server:localhost
ID system:NSP
system number:00
sAP system:R3
my laptop is standalone one therefore I don't have a network at home.when I try
to logon saplogon640 I get this error message:
sapgui 640
partner not reached
(host 127.0.0.1,service sapdp00
wsaeconnrefused:connection refused
(further informations)
component NI(network interface)
release 640
version37
module:nixxi_r.ccp
line8688
method:nipconnect2
return code-10
system call:sipeck pendconn
error no:10061
error text:wsaeconnrefused:cxion refused
please if anyone has already got this matter thanks in advance about your helpI think its a problem with some firewall or the AV, because when i have running avast in my pc appears the same error message and when i shut down the avast i have no problems, also there are too much post like this one with no solution, admins put an eye right there, because many of this is not listed in documentation file, or i think so, are not listed problems like this one.
If someone knows something, ill be glad to read it, and see if its causing the problem the av or what it is, i tell u one more think, my win firewall its also down, im using xp home sp3 and it works properly when the av is not running, thanks -
Sun Java Portal Server 7.1 Connection Refused
I am having issues with connecting to Portal Server, I am able to connect to web console and the directory server is running and to amconsole but am unable to connect to the portal server. I keep getting connection refused please help.
Hi ,
Do you mean the welcome page that is provided and which point to the three sample portals ? or the login page ?
The login page can be customized see in the Access Manager Documentation :
http://docs.sun.com/app/docs/doc/819-4675/6n6qfk0qb?a=view
Michel
Maybe you are looking for
-
The hard drive on our laptop crashed and we took it to the apple store and they said we can transfer all files photos and videos over to another mac laptop via a special cable. We did that and everything for the two users transferred over to the oth
-
Never Get Buddy's Video in Window for iChat AV
Here's something basic that's got me stymied - I'm trying to set up a video chat with my daughter at school, both on iSight-equipped MacBooks. We tested the capability when she was home, and it worked great. Now, we get the chat set up, and she can s
-
BlockingQueue on SMP (Multiprocessor)
hi guys, i wrote an udpmulticast application, it has some threads. thread 1 gets a datagramm-packet from socket with receive, creates an object and puts it (with offer-method) in the blockingqueue (LinkedBlockingQueue impl.) thread 2 gets objects fro
-
For now I am calling SPROCS from HTMLDB links and passing the app, page, and session. Then using htp.p to print out a <script> tag with window.location to redirect to a page in the app. Is there a better way to have the SPROC redirect to an HTMLDB pa
-
Help- I have no idea how to use this program.
Hi All, I am really at a loss at the moment. I am hoping to create a flash document for work in order to present an idea I have. What I am basically wanting to do is to create an interactive workbook for clients on occupational health and safety. The