Portal CE 7.1 - application not seen in Portal

Hi Dharmi,
please have a look at sap note 1033272. There are different reasons described why deployments can fail.
Hope this helps.
Regards,
Norbert

Hi Norbert,
Thank you once again. After your suggestion I did create an iView , but I get the same runtime error : " Runtime error portaal
Exception opgetreden bij verwerking van uw aanvraag
Exception id: 12:57_21/07/08_0006_3425650
See the details for the exception ID in the log file.
On checking the log, I see that the application doesn't seem to be updated after deployment...
Best regards,
Dharmi

Similar Messages

IPhoto 6 library not seen by other iApps and 3rd party applications

EVery since upgrading to iLife 6 my iPhoto library is not seen by iWeb, iMovie, ScreenSaver preference panel, PrintShop 2, etc. What I've tried:
1. Rebuilding all four options library
2. Deleting prefs
3. Repair permissions
Any ideas on what else i can try?

Randy:
What do you see when you look for photos in the Media pane of iDVD or iMovie?
In addition to deleting the pref files for the iApps there's another preference file, com.apple.iApps.plist, that you should delete also. Then open the applications in the following order: iTunes, iPhoto, iMovie, then iDVD. That may help.

Secure storage not seen from configtool and Portal not starting

Hi,
My Portal is not starting. The dispatcher and sdm are starting,but server0 is not able to start.The exit code displayed was -11113.
I checked up the log files and the error displayed was :
No active user store set.
I opened up the Configtool , and the secure storage node and ume ldap storage node are not seen at all.
Here is a what was found in the trace file:
#
#1.5#000180522ADA001E0000000A000017A4000408D055EC5E0A#1135590794609#com.sap.engine.core.service630.container.ServiceRunner##com.sap.engine.core.service630.container.ServiceRunner#######SAPEngine_System_Thread[impl:5]_58##0#0#Error#1#/System/Server#Java###Core service security failed. J2EE Engine cannot be started.
[EXCEPTION]
#1#com.sap.engine.services.security.exceptions.SecurityServiceException: Unexpected exception:
 at com.sap.engine.services.security.SecurityServerFrame.start(SecurityServerFrame.java:186)
 at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:201)
 at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:142)
 at com.sap.engine.frame.core.thread.Task.run(Task.java:60)
 at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:73)
 at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:98)
Caused by: com.sap.engine.services.security.exceptions.BaseSecurityException: No active userstore is set.
 at com.sap.engine.services.security.server.UserStoreFactoryImpl.getActiveUserStore(UserStoreFactoryImpl.java:77)
 at com.sap.engine.services.security.server.jaas.LogonInfoLogger.update(LogonInfoLogger.java:322)
 at com.sap.engine.services.security.server.jaas.LogonInfoLogger.<init>(LogonInfoLogger.java:57)
 at com.sap.engine.services.security.server.SecurityContextImpl.<init>(SecurityContextImpl.java:54)
 at com.sap.engine.services.security.SecurityServerFrame.start(SecurityServerFrame.java:146)
 ... 5 more
Can anyone explain how I must solve this problem.
(People who answer the question will be richly rewarded)
Regards,
Harish

Hi Harish,
 Check whether your SecStore.properties file exists in <SID>\SYS\global\security\data folder. If not, place that file from the backups you have.
Regards,
Siva
P.S: Award points if you find this useful.

Organizations are not seen from Application R12

Hi,
I have installed R12.1 Fresh Database in my laptop and its running fine. I created Location, Organization and Organization classification using HRMS super user responsibility. When I opened the organizations window the organization that I created is not seen but they are stored in database. Is there any setup that I am missing?
Thanks in advance.

Hi,
To access UK SHRMS Manager I changed the profile value for UK SHRMS Managers responsibiity. I choose "HR User" value at Responsibilty level for "HR User Type" Profile.
Then I created location.
UK SHRMS Manager>Work Structures>Location
Then I created Organization
UK SHRMS Manager>Work Structures>Organization>Description
I classified this organization as Business Group.
I closed all the windows. When I tried to query the organization that I created, only the default Business Group (Setup Business Group) is seen. But I can see all the organizations that I created in the database.
I hope this will give you some idea to fix my problem.
Thanks in advance

Finder got an error. Application not running (-600)

I have a LaunchAgent that calls a shell script, at login. The shell script runs and determines the users AD container and then will runn the correct applescript application depending on the AD Container. The applescript applications simply mount up the users network volumes, runs a few do shell scripts and then exits.
It works and has been working for quite some time, under 10.5.x, 10.6.x, 10.7.x and even 10.8.x. But I have started getting a few users who are getting a rather odd message in the logs that the script creates and I can't really find anything on the error message.
"Finder got an error. Application not running (-600)"
If I log the user in and run the following at the command line:
launchctl unload name.of.plist
It will unload the launchagent.
If I type this at the commane line:
launchctl load name.of.plist
It works perfectly. No errors.
I can manually run the shell script it calls and that works fine.
I can also manually double click the apps and those run fine.
I've changed the permissions, I've recopied, re-imaged, but I can not figure out why the script won't sometimes and gives me that error message.
Has anyone seen this error message before and what I can try to do to fix it?
Thank you in advanced.

This sounds like a typical race condition, and it's impossible to solve without seeing the script.
The issue is that your script is targetting some application that isn't available. Ordinarily AppleScript will launch an application if it's not already running, but during launch it's possible that your script is trying to target an application before it can be launched (because the user's envirnment is still loading).
So you need to look at the script to see what it's doing, and what apps it's targeting. The fix might be as simple as adding a few delays to allow the system to finish logging in, but t's hard to say without more data.

I have migrated a user's mysite in sharepoint 2013 from one domain to another.The issue is that old activtiy data i.e newsfeed data is not seen

For eg :
I had a user called domain1\user1 whose mysite was created as http://my/personal/user1.
Now this user moves to another domain say domain2\user1.Since mysite is already present no new mysite will be created.
Move-SPUser –Identity "domain1\user1" –NewAlias "domain2\user1"After executing the above query,user is migrated and is able to login to the mysite.But the newsfeed data is not seen.I can see it in the microfeed list but not in the newsfeed page.All other data like documents ,tags,people etc is present
harsh damania

it should move all the profile data alonwith, i would check the ULS logs for any clue.
also make sure following timer jobs ran successfully
User Profile service application name - User Profile to SharePoint Quick Synchronization
User Profile service application name - Feed Cache Repopulation
User Profile service application name - Activity Feed Job
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Webdynpro application not functioning from Apache Reverse Proxy

Hi Experts,
We are currently working on custom webdynpro application, which needs to be exposed to Internet. We are using Apache HTTP Server as a reverse proxy.
We canable to access URL, but no images are getting displayed and also the application not functioning when we click any button/links.
Below is the HTTPD file configuration.
ProxyPass /esampleApp http://hostname:port/webdynpro/dispatcher/local/esampUI/ESamplingApp
ProxyPassReverse /esampleApp http://hostname:port/webdynpro/dispatcher/local/esampUI/ESamplingApp
When we look into image URL, which is being called from Apache, we found out "webdynpro" is missing in the URL.
Actual URL in Portal Server: (working)
http://portalhostname:port/webdynpro/resources/local/esampUI/Components/esampling.ui.ESamplingComp/logo.gif
Apache URL:
http://Apachehostname:port/resources/local/esampUI/Components/esampling.ui.ESamplingComp/logo.gif
Please suggest.
Thanks
Aravind

We also had the same issue, but the problem was that instead of http https was getting called.
This has to do with 2 settings:
1. Check the reverse proxy re-write URL's again. Note that there will be 2-3 entries one for webdynpro as well.
2. Open your system definintion in system admin-sys configuration adn check the WAS settings. this should point to the FQDN of the proxy server and not to the R3 server.
ankur

Accounting document created- not seen doc flow..

Hi,
i have an issue with respect to accounting document. After saving the billing, accounting document is generated. When i see the document flow, Invoice is still open, accounting document is not seen in the flow.
When i double check with customer open item, FBL5N, i am not getting the amount reflected there.
When i try to release the blilling document, i am getting the below error.
FI/CO interface: Balance in transaction currency
Message no. RW022
Diagnosis
The balances in transaction currency must be zero for each logical transaction when transferring to the FI/CO interface. A balance of " 0.02" "INR" was determined for the logical transaction "".
System Response
The FI/CO interface does not process any transactions which have a balance in transaction currency other than zero.
Procedure
This is a system error of the calling application.
Kindly guide me.
Thanks,
Saravana Raja

Dear Saravana Raja,
Please search the forum before posting
Please go through the following thread addressing the same issue.
FI/CO interface: Balance in transaction currency
Thanks & Regards,
Hegal K Charles

Application not appearing

Hi Experts,
I having created a custom wedbynpro application using FPM, but when I created the Application of the webdynpro component the applciation is not seen.
However, when I go to the Package and under the hierarchy 'Webdynpro applications' I am able to view the application.
BR,
Aarvi.

This is alright. i assume that You have created a application based on a FPM_OIF_component of GAF component. That is the reason it is appearing under the application node.
When you create a application based on you component then your expectation is correct.

PCUI Application Not Found eRROR

I would like to use the PCUI, so I was advised to go to transaction se80 select BSP Application from the drop down,type in CRM_BSP_FRAME, click the display button and then click on Pages with Flow Logic. Right click on select.htm and click on test.
This is suppossed to open a browser window where I can find list of BSP Application. Unfortunately whenever click on test I get an error "Application Not Found" together with the url whihc was meant to lead me to
the BSP.
Could anyone help me on this one, we are implementing CRM 4.0 and need it for case management as as other pcui business processes.
We also are implementing the Enterprise Portal, just letting you maybe you caould advise on how best to go about this scenario.

Thank you so much Manuel, Frederick, and SAP Addict for the assistance, you know what I think its my computer that has a problem, because I decided to login from another machine and fortunately when I tried to open the PCUI it did not give me the No Application Error Found message. Instead it is giving me a Network Access Message Error.
On the other hand when I use the machine upon which the Enterprise Portal is being developed, I receive the following error:
"This browser is not supported"of which the default browser is Mozilla. We changed it back to Internet Exp, and the error this time after I logged using my GUI user name and password was a RABAX30 error.
So with regards my error "Application Not Found eRROR" what could be the possible cause, could it be that there are some GUI componentes missing or what???????
Oh I rewarded points to each of you guys, may you please continue with the support will sure reward points

How do i set colors on javascript coding page, colors are not seen after installing Firefox version 8

How do i set colors on javascript coding page, colors are not seen after installing Firefox version 8 . I am using WaveMaker application for web development

Make sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Accessibility settings.
*Tools > Options > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
*http://kb.mozillazine.org/Website_colors_are_wrong
*http://kb.mozillazine.org/Websites_look_wrong

My pictures folder for iphoto is not seen anywhere..

my pictures are not seen anywhere on my computer. it seems to be missing in a folder or the folder was deleted i am not too sure. when i go to my name computer and go to pictures the only option is the iphoto recovered photos library and not the iphoto library itself. i hope not to have to redownload this since i have over 5,000 photos in my library. hope you can help

This one's more up to date - and pretty pictures too...
With iPhoto 7 (iLife 08) the old iPhoto Library Folder is now a Unix Style Package File. The change was made to the format of the iPhoto library because many users were inadvertently corrupting their library by browsing through it with other software or making changes in it themselves.
There are many, many ways to access your files in iPhoto:
For 10.5 users: You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Apple-Click for selecting multiple pics.
Uploaded with plasq's Skitch!
To upload to a site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
This is also true for emailing with Web-based services. If you're using Gmail you can use THIS
If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto. With 10.5 you can access the Library from the New Message Window in Mail:
Uploaded with plasq's Skitch!
If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
Or, if you want to access the files with iPhoto not running, then create a Media Browser using Automator (takes about 10 seconds) or use THIS
Other options include:
1. *Drag and Drop*: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
2. *File -> Export*: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
3. *Show File*: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
You can set Photoshop (or any image editor) as an external editor in iPhoto. (Preferences -> General -> Edit Photo: Choose from the Drop Down Menu.) This way, when you double click a pic to edit in iPhoto it will open automatically in Photoshop or your Image Editor, and when you save it it's sent back to iPhoto automatically. This is the only way that edits made in another application will be displayed in iPhoto.
Regards
TD

New Page Tab is not seen

Hi,
I'm working with Server Database and I added the new page tab is not seen.
I already compiled and valided the project. Also I already restart the server.
What I need to do?

Hi,
In application go to SiteMap--User Prefernces-Tab Layout,
Verify that your tab is there and Hidden is unchecked,
regards
Goud

'Application not responding' message

I am new to iChat (and to Macs generally). The other day I tried out iChat (having set up a .Mac account) and everything seemed fine. But ever since then when I launch iChat the Buddies window comes up and the little spinning colour cicle goes round for ever and from the Dock the menu item at the top says 'Application not responding'. I have seen that others have had this problem but I don't seem to be able to access the answers they got. Any help would be much appreciated.

Hi The Old Wreck,
Did you run through these screens ?
http://www.siriusaddict.com/ichat.html
These should have enabled you to type in your Screen Name when you selected the correct account type.
If you are not sure then delete all the .plists for iChat.
This will mean going to /Users/(your Account)/Library/Preferences
(Open your hard drive then Users then your Account (little house iCon) then the Library in there then Preferences)
Find these items
com.apple.iChat.AIM.plist
com.apple.iChat.Jabber.plist
com.apple.iChat.plist
com.apple.iChat.SubNet.plist
com.apple.iChatAgent.plist
Put them in the trash (Delete them)
Try iChat again.
It will make you go through the Start Up screens again.
Also check the Address Book.
Find the Me Card (Head and shoulders icon)
Make sure this shows your details including your @mac name.
2:03 PM Friday; December 29, 2006

Web Cam not seen

Drivers for Chicony web cam and for HP Webcam application were installed from your site.
Camera was operatinig for some period.
Now it is not seen in the list of hardware.
In BIOS it is activated as well.
Reinstall of drivers did no deal.
Any suggestions, please?
This question was solved.
View Solution.

Sure knock yourself out. Here is the Service Manual:
Manual Link
Remove the front screen housing and the webcam will be at the top of the screen. You can try reseating the connector cable but there is about a one in a thousand chance that is the issue. See Page 76. You do not actually have to disconnect the whole screen housing from the bottom chassis.
Look at about 2:08 into this video and you will see where the webcam is at the top of the screen housing.
https://www.youtube.com/watch?v=mny4pPQD8hQ
Just in case you wind up needing it (good chance), the webcam board plus cable is 13 bucks on eBay:
eBay auction for webcam
If this is "the Answer" please click "Accept as Solution" to help others find it.

Portal CE 7.1 - application not seen in Portal

Similar Messages

Maybe you are looking for