Portal component information reporting incorrect version

Dear all,
Has anyone experienced that the portal content information (http://hostname:port/monitoring/ComponentInfo)is reporting incorrect information? We have installed XSS 603 components and the summary part does not reflect that , but the details does.
Its also not reporting SAPPCUI_GP in the software component part. Has anyone seen this and whats the fix?
Thanks!
Neeta

HI Shanti,
I followed the intructions in note # 910073 and all worked fine. However, the version information is still not reported correctly. component information is reporting ESS600 and we have ESS603 installed & no PCUI component is reported but the details show that its deployed.?
Does the portal need to be restarted after the change in note 910073?
Regards, Neeta

Similar Messages

  • Software Informer reports AIR version 6?

    I run a program on my computer called Software Informer. It
    shows me which programs on my computer are outdated and somtimes
    offers a link to the current version. In the case of AdobeAIR, it
    shows the current version should be version 6.0, while MY version
    shows as 1.1.0.5790. I can't even suspect that the version 6.o is a
    beta, considering the jump in versions from 1 to 6, so I suspect
    the mistake is theirs. I would be happy to report the mistake to
    them, but it would be fixed much quicker if I can verify with you
    that version 6 does not exist (even in beta) and if you can give me
    a link showing the actual current version number, that would also
    help.
    Thanks

    There is no version 6. Not Yet.
    1.1 is the latest version.
    -ted

  • CS6 upgrade download with IE10 reports incorrect version of IE

    I have another problem now, I have purchased from Adobe the upgrade for CS6 but when I try to download it says I do not have the correct version of Internet Explorer and yet IE is telling me I have version 10 - I also have windows 8 and since Adobe doesnt like IE I have downloaded Mozilla but I am still unable to download and tried everything spending a good half an hour - I have the product receipt and just dont know where to go next, such a pain I had hoped this would be easy, just recently I have encountered enough problems one way and another.
    regards Ann

    Originally part of http://forums.adobe.com/thread/1220093
    New discussion created due to new question being asked.

  • Wsv4400N router on download page reports "incorrect version" when updating

    Appreciate any proper updates. the download page is basically useless.

    Well try upgrading the firmware of the router & keep on holding tightly the reset button in such a way that power light is blinking on the router & then do a complete network power cycle i.e., unplug the power cables from the modem & from the router & then plug in the power cable to the modem first once all the lights are solid green you could plug in the power cable to the router & check out it will definately work!! or else you could try downloading the firmware through ftp.linksys.com & you should be able to resolve the issue.

  • PortalRuntimeException in Business Object document iview No portal component associated with the following context

    Hi all,
    We are stumped with a problem in our QA Enterprise Portal (7.3.1 Sp7) that throws a portal runtime error when we preview a Business Objects document iview.  The Business Objects Server versions are 4.0 SP5 and/or 4.1 SP3.
    The error is caught in the the defaultTrace file, /usr/sap/QNW/J00/j2ee/cluster/server0/log
    [EXCEPTION]
    com.sapportals.portal.prt.runtime.PortalRuntimeException: There is no portal component associated with the following context:
    pcd:portal_content/com.summit.SES_BI/com.summit.iviews/Daily_Margin
    at com.sap.portal.prt.component.PortalComponentContext.<init>(PortalComponentContext.java:93)
    Here is what we have tried
    * Confirmed the iviews exist in the PCD, by browsing to the content folders and right lick, preview on the iview.
    * Our PRD and DEV systems work correctly and are on same versions of EP Runtime and java. 7.3.1.7.0.201..
    * Occurs with all Businessobjects iviews from the QA portal and all doc types, webis, dashboards. Tried creating new iview.
    * Reapplied the com.sap.businessobjects.iviews.templates.epa to the Portal from t he BI 4.1 SP3 distribution
    * Deleted and recreated the BI portal system connector using the SAP BOBJ system template set path to http://bi-qas:8080/BOE
    * Set the embed key value in the BI system connector property and in the custom global.properties file, restarted tomcat and SIA services
    * Set permissions for everyone end user on the content folders and the BI system connector
    * Confirmed Single sign on configured correctly between BI and Portal
    * Confirmed that the QA BI server is configured correctly by directing the working DEV Portal to the QA BI server.
    * Performed actions in note 1709737
    We are certainly stuck and the defaultTrace file is not very informative.  Any suggestions are greatly appreciated
    Lee Lewis

    This is resolve with note 1615838  - SAP Netweaver Enterprise Portal 7.3 iView creation with BI 4.0 results in exceptions.
    The note includes a file portalapp.xml that need to be inserted into com.sap.businessobjects.iviews.par that is included in the BI server distribution.
    Then deploy the ear file.....
    Odd thing is that the note mentions 4.0 and we are on 4.1 SP3...
    Environment
    SAP BusinessObjects BI Platform 4.0 SP02 Patch 4 or lower
    SAP Netweaver Enterprise Portal 7.3
    Lee Lewis

  • Anonymous access to Portal Component over direct URL.

    Hi All,
    Im having a few Issues with enabling anonymous access to a portal component.
    Here is a mock of our portalapp.xml file
    <?xml version="1.0"  encoding="iso-8859-1"?>
    <application>
      <application-config>
        <property name="SharingReference" value="usermanagement, knowledgemanagement, landscape, htmlb, exportalJCOclient, exportal"/>
        <property name="startup" value="true"/>
        <property name="releasable" value="true"/>
        <property name="Vendor" value="com.ourdomain"/>
        <property name="SecurityArea" value="OurSecurityArea"/> -->
      </application-config>
      <components>
        <component name="MyComponent">
          <component-config>
            <property name="ClassName" value="com.ourdomain.MyClass"/>
            <property name="ComponentType" value="servlet"/>
            <property name="SafetyLevel" value="no_safety"/>
          </component-config>
          <component-profile/>
        </component>
      </components>
      <services/>
    </application>
    I want to be able to access the servlet over a URL like...
    http://host:port/irj/servlet/prt/portal/prtroot/MyApp.MyComponent
    I have added the Default User Group Everyone to the no_safety area of our com.ourDomain Security Zone.
    However when try to navigate to the URL we are first faced with a SAP Portal login page. on successful login the servlet is then shown.
    Note: I was able to get the Same Servlet working within an iView when the iViews Authentification Scheme was set to anonymous...However i am under instruction to get it working without the iView...
    As Background, The servlet is to be a sink for accepting data sent via an HTTP Post.
    Any help with this or pointers in the right direction would be greatly appreciated.
    -Paul

    Hi Darrell,
    Thankyou for that, yes it has helped....And I can now access the servlet directly without need to login.
    I figured that there was something that i was missing.....
    -Paul

  • Error while running a portal component.

    Hi,
    I am not able to access portal service from an abstract portal component that I created in the same project as the portal service. Here is the error I am getting:
    Portal runtime error.
    "An exception occurred while processing your request. Send the exception ID to your portal administrator.
    Exception ID: 11:45_15/01/09_0068_15350950
    Refer to the log file for details about this exception."
    Here is the portalapp.xml:
    <?xml version="1.0" encoding="utf-8"?>
    <application>
    <application-config/>
    <components>
    <component name="AOSTestComp">
    <component-config>
    <property name="ClassName" value="com.gfc.ume.service.AOSTestComp"/>
    </component-config>
    <component-profile/>
    </component>
    </components>
    <services>
    <service name="OfficeListService">
    <service-config>
    <property name="className" value="com.gfc.ume.service.OfficeListService"/>
    <property name="startup" value="false"/>
    </service-config>
    </service>
    </services>
    </application>
    Here is the code for the service:
    public interface IOfficeListService extends IService
    public static final String KEY = "OfficeListService";
    public String testMyService(String user);
    Here is the code for the component:
    package com.gfc.ume.service;
    import com.sapportals.portal.prt.component.*;
    import com.sapportals.portal.prt.runtime.IPortalRuntimeResources;
    import com.sapportals.portal.prt.runtime.PortalRuntime;
    import com.sapportals.portal.prt.service.IService;
    public class AOSTestComp extends AbstractPortalComponent
    public void doContent(IPortalComponentRequest request, IPortalComponentResponse response)
    IPortalRuntimeResources runtimeResources = PortalRuntime.getRuntimeResources();
    IService aService = runtimeResources.getService(IOfficeListService.KEY);
    IOfficeListService myService = (IOfficeListService)aService;
    response.write(myService.testMyService("Longivity"));
    Thanks
    Tony

    Tony,
    this is Java Web Dynpro forum.You already have posted this same question twice in Portal forums. This is third time. please dont do so. We have to keep SDN clean (no redundancy).
    Regards,
    Yogesh Varma

  • Error when use Crystal report Bundled Version with Vs2003 on Windows Vista

    Post Author: MartinoLuccarelli
    CA Forum: .NET
    Hi,  I have developed a software with Vs2003 that uses Crystal report Bundled Version.   I have created a Installation package that include the merge modules,   and i have entered the Licence Key for Crystal_regWiz2003 module.    If i install and use the software in the computer with XP or Windows 2000 I do not have problems.    But when i install the software on the PC with Windows Vista i have this error when the probram show a report "Operazine di Crystal Report non Riuscita perche' non e' stato possibile ottenere una licenza gratuita nel tempo allocato"  Thank's

    Uninstall CRVS2010 that you currently have installed.
    To remove the assemblies from the GAC use gacutil. Google will get you a number of links on how to. Also, see the KB [1535325  - How to remove CRVS2010 Beta 2|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333533333335333333323335%7D.do].
    Reinstall CRVS2010 SP1 from here:
    SAP Crystal Reports, developer version for Microsoft Visual Studio: Updates & Runtime Downloads [original link is broken]
    - Ludek

  • Stop/Kill a Abstract portal component

    Hi All,
    I am working on EP 7.0 version.
    I have created a Abstract Portal component and uploaded the par file using Portal Archive tool.
    I ran the component by executing the url as below:
    http://<hostname>:<Port no>/irj/servlet/prt/portal/prtroot/Parfilename.ComponentName.
    The componet is having a bug and it is running in an infinite loop.
    Please let me know how to stop/kill this component as its logging some statements infinitely.
    Thanks in Advance,
    -Pavan

    Hi,
    You'll need to restart the server.
    Regards,
    Alex

  • Using JDO in a portal component.

    Hi!
    I've tried using JDO in a portal component (DynPage), but it just won't work for me (WAS 6.40).
    What I've tried is this:
    - Looking up a PersistenceManagerFactory using the name "java:comp/env/jdo/defaultPMF"
    This does not work ... I get a NameNotFoundException: Path to object does not exist at java:comp, the whole lookup name is java:comp/env/jdo/defaultPMF
    - After reading this forum I tried with the name "deployedAdapters/jdo/defaultPMF/shareable/jdo/defaultPMF" although this is probably not the correct way
    This did return a PersistenceManagerFactory object, however I wasn't able to cast to the PersistenceManagerFactory interface that I had. It must have been different versions of the interface - I tried downloading the jdo.jar from Sun and compiling the portal component against that, but still the ClassCastException occured. I used the reflection API to determine that the object returned did in fact implement the interface named javax.jdo.PersistenceManagerFactory. I even tried using the jdo.jar libraries from the server, but to no luck.
    So ... my question is: Is JDO not available from a portal component? Must I develop a J2EE application to make it work? If so, I'd rather use Hibernate in my portal components, but it seems stupid when JDO is available?
    Thanks,
    Thomas

    Hi Thomas,
    In order to be able to use JDO in a Portal component, you have to add a Private Sharing Reference to the application sap.com/com.sap.jdo. This is a standard application provided with the SAP WebAS Java installation.
    For more info on how to do that, please refer to <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/ep/g-i/how%20to%20access%20an%20ejb%20from%20a%20portal%20component.mht">this</a> tutorial -> Accessing the EJB -> New Portal Component -> scroll to the section "Add PrivateSharingReference".
    Hope that helps!
    Vladimir

  • Difference between Crystal Report with VS2010 and Crystal Report Professional Version

    Dear Experts,
    We want to know the difference between Crystal Report Version with VS 2010 and Crystal Report Profesional Version.
    And from where we should buy it provide the link.
    Thanking you,
    Miral Shah

    If you are looking for difference in features, see this.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/60df293e-41e8-2e10-9293-fa4beeb40a99?QuickLink=index&overridelayout=true&52772263221521
    You could design your report with any one of CR 2008/2011/2013 and still could use in the app with 13 version references.
    Here is the licensing info. http://scn.sap.com/docs/DOC-21575
    - Bhushan
    Senior Engineer
    SAP Active Global Support
    Follow us on Twitter
    Got Enhancement ideas? Try the SAP Idea Place
    Getting started and moving ahead with Crystal Reports .NET applications.

  • SQL 2012 SP1 DB Engine discovery; incorrect version

    Hi All
    I've added the latest SQL MPs (6.4.1.0) to our SCOM 2012 R2 instance and have been working through the steps to get our 2008 and 2012 DBs added and monitored by SCOM. The 2008 db's have gone in fine, but I noticed that our 2012 db's are visible but are not
    monitored. 
    What I've noticed is that the "SQL Server 2012 DB Engine Group" has not been populated (unlike the 2008 engine groups) and looking at the dynamic inclusion rule, it's trying to match the wildcard 11.0.*. This is where it gets interesting, because
    I can see from querying the SQL server directly that each 2012 instance has a version of 11.0.3000.0, but the version under  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server\110\SQLServer2012\CurrentVersion is 11.1.3000.0. The engine version
    that SCOM reports is also 11.1.3000.0, so I assume that it's picking up this as the version and is therefore not adding the SQL 2012 instance to the DB Engine Group because it doesn't match the 11.0.* wildcard.
    Whilst I've found one or two articles that refer to this problem (specifically http://ianblythmanagement.wordpress.com/2013/09/12/sql-server-2012-db-engine-group-problem), I can't work how to get around this problem and get these 2012 dbs monitoring
    in SCOM. I don't fancy attempting to change version number on the SQL servers, and I can't work out a way to amend or override the 2012 Discovery MP to also pick up 11.1.* versions.
    Does anyone have any ideas on how to work around this (other than wait for an update to the MP and hope it's fixed there !) ?
    Cheers
    Neil

    Hi,
    The issue has been report to Microsoft feedback here.
    http://connect.microsoft.com/SQLServer/feedback/details/813297/sql-server-2012-sp1-setup-sets-incorrect-version-number-in-the-registry
    You can create  a custom group with the rule. ( Object is SQL Server 2012 DB Engine AND ( Version Matches wildcard 11.1.* ) AND True )
    Niki Han
    TechNet Community Support

  • HTML Meta Tags in Portal Component

    Hi,
    I have created a portal component and would like to add in <meta> tags into the head of my html document. I have a jsp using the hbj:documentHead tag to add meta tags to the html.
    However, when the page is rendered, the <meta> tags appear in the <body> instead of the <head>.  Is this a bug in the portal?
    Thanks in advance.
    Nick Mitchell

    You could probably hack it by using extending  AbstractPortal and overwriting for example doOnNodeReady ( http://media.sdn.sap.com/html/submitted_docs/60_sp2_javadocs/runtime/com/sapportals/portal/prt/component/AbstractPortalComponent.html )
    Why do you need the meta information ?

  • Read properties file in abstract portal component

    Hi,
    i have test.properties file, i want to read information on this file and its located in src.api/properties . if any one knows How to read this  properties file in abstract portal component please tell me.
    Regards,
    nari.

    Hi Nari,
    Follow the below steps:
    1. Store your properties files (test.properties, test_en.properties, test_xx.properties where xx is the locale ) in the folder PORTAL-INF ->Private ->classes
    2. In portalapp.xml for component-config, add this
    <property name="ResourceBundleName" value="test"/>
    3. In your abstract portal component you can use the below code to fetch the value for the key "SERVER_NAME".
        public void doContent(IPortalComponentRequest request, IPortalComponentResponse response)
             ResourceBundle resourceBundle = request.getResourceBundle();
             if(resourceBundle!=null)
                  response.write(resourceBundle.getString("SERVER_NAME"));
             else
                  response.write("Error");
    Let me know if you still face any issue.
    Thanks
    Prashant

  • Difference between abstract portal component ,dynpages and jsp dynpage

    Hi All,
    I am new to the SAP world.Can you help me out in finding the difference between abstract portal component ,dynpages and jsp dynpage in Portal development.Please send me  any information.

    Hi,
    Welcome to SDN Community
    This blog will brief you the differences between them,
    Java development methodologies (Part II)
    Regards
    Srinivasan T

Maybe you are looking for