Portal configuration: when CIM test getting failure

Hi everybody,
here i got problem while importing files cr_content .zip .
iam getting failure.
And also in performing CIM TEST in visual j2ee admintool.
the test is failure.
Intial time my sytem works properly after few days i got error like this .
how to solve these problem.
give guidence, otherwise refer manuals .
with
jagadeesh

Hi Jagadeesh,
At the first step, check whether that you can logon to the SLD by using the user that you are using for CIM connection on J2EE visual admin.
At the second step, be sure that you are importing correct version of "CR Content".
Best regards,
Orkun Gedik

Similar Messages

How do I email my photos to instructor so extended information can be viewed. He says they need to be in jpeg file. When I test copy to myself I cant get this information.

How do I email my photos from iphoto to my instructor so the extended information can be accessible. I have tried emailing from share and included titles and descriptions but when I test it to me I can not access the extended info. Also how can I email more than one photo in one email. These photos are for a class and have not been altered by iphoto. Thanks

Select a photo and export it to the desktop (file menu == export) and in the finder select it and show info - is the info you want there (it is for me) - If it is Then attach that photo to an e-mail sand send it - if the info does no arrive then g-mail is the issue
BTW You can use Apple mail and configure it to use G-Mail as its server
LN

HT203175 Running Windows 7 64, when installing, I get the error, 'itunes encountered an error and could not configure'. Ideas?

Running Windows 7 64, when installing, I get the error, 'itunes encountered an error and could not configure'. Ideas?

iTunes unknown error 13010

When m testing webdynpro abap application m getting this error help me to get solution

hi all,
when m testing webdynpro abap application m getting this error help me to get solution.
plz find the screen shot

Hi
I think you are using the IDES system, Can you check the services in SICF transaction. If the service is not activated you activate it again.
In this path you will find in the below path and try to check/activate the services relevant to the WDA stack.
sap/bc/webdynpro/sap

I am set up mac mini and when I test the mail server by sending a mail from administrator to administrator I get the error message 'Diagnostic-Code: X-Postfix; connect to 127.0.0.1[127.0.0.1]:10024: Connection refused'. Can any one suggest a solution

I set up mac mini and when I test the mail server by sending a mail from administrator to administrator I get the error message 'Diagnostic-Code: X-Postfix; connect to 127.0.0.1[127.0.0.1]:10024: Connection refused'. Can any one suggest a solution

Thanks. Where could I possibly look for a firewall rule. I knowingly did not creat any. My system has internet coming to a Modem which then is connected to a wireless router. I have computers connecting to the router through cable as well as wireless. One of these computers has been our mailserver using Mercury and Pegasus and that computer has a static IP address. The Mac Mini also has been assigned a different srtatic IP address. I have only set up user account, none of them an email account as I initially expect them to receive only internal mails. Is it necessary that I must set up an email id for each user while setting up the user account. My server id is server.local. So would the email id for local users be [email protected]?

How to fix iWeb Test Connection Failure when i have correct login information??

I have been using iWeb and updating my site with no issues. Suddenly I can not connect to the FTP and when i test the connection with the correct login information i get a message that a connection could not be established. I'm not real familiar with how iWeb works to post to our website so i'm confused on why it is not connecting. Any help would be great!

Sometimes the built in iWeb ftp does this. You can test to see if it is an iWeb problem by perhaps trying a dedicated ftp programme instead such as the free Cyberduck. Download Cyberduck and then you'll have to publish your website from iWeb to a local folder and then use Cyberduck to connect to your host with the same log in details and see if this works. If Cyberduck can connect to your host/server, then the problem is with iWeb.

When the program gets terminated unexpectedly (power failure, UPS fails), when I reopen it, it usually does NOT return the previous pages, as I have checked in the 'options' box,

# Question
When the program gets terminated unexpectedly (power failure, UPS fails), when I reopen it, it usually does NOT return the previous pages, as I have checked in the 'options' box, but goes to some random collection of pages often from months ago. Very frustrating - can anything be done to COMMAND it to save current pages and re-open there? (As I said, I have this box checked in the options, but it does not work ..

Very Important, how much Free Space is on your Hard Drive first of all? Click on the Macintosh HD on the Desktop, then do a Get Info on it.
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
Do they launch OK while in Safe Mode?

When I run my hardware diagnostics I'm getting failures - WDC-WD64-00AAKS-65A7B2 SATA DISK DEVICE.

When I run my hardware diagnostics I'm getting failures - WDC-WD64-00AAKS-65A7B2 SATA DISK DEVICE,
HD535-5W, HD535-3W, HD535-2W.
Thanks!!!

That means exactly what it's telling you, the hard drive has failed or is about to fail and needs replacement.
If the system still runs backup your data and create Recovery DVDs ASAP if you haven't already done so.

Oracle Portal Configuration failure during Oracle9iAS installation!!

Hello all,
I have couple of questions:
1) Iam trying to install the Oracle9iAS files that i have
downloaded with MINIMAL edition option. Installation tells me
that it contains the Oracle Portal (just like Standard,
Enterprise edition). Everything goes fine with the installion
except that the configuration of the oracle portal configuration
assistant (OPCA) fails with th following message::
Silent Mode : false
Portal Schema : portal30
Portal DAD : portal30
SSO Schema : portal30_sso
SSO DAD : portal30_sso
Listener Hostname : clmwin2ksrv
Listener Port set from Command Line :80
Connect String : change_on_install
SYS Password : ********
Default TableSpace : TEMP
Temporary TableSpace : USERS
Document TableSpace : USERS
Logging TableSpace : TRUE
Demo Install Option : FALSE
Log Verbose Mode : FALSE
Install Reports Integration : TRUE
INSTALL : Database Version : 8.1.6
INSTALL_DEBUG : Tablespace size: 180728
STEP 4 : Creating Portal Schema...
INSTALL_ACTION:installGlobalComponents() : ..\..\bin\sqlplus
SYS/<sys_password>@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=
(PROTOCOL=TCP)(HOST=clmwin2ksrv)(PORT=1541)))(CONNECT_DATA=
(SID=ora8db))) @..\..\portal30\admin\plsql\wwv\wdbisys.sql
portal31 USERS TEMP wvinssys.log
INSTALL_ACTION:installGlobalComponents() : ..\..\bin\sqlplus
SYS/<sys_password>@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=
(PROTOCOL=TCP)(HOST=clmwin2ksrv)(PORT=1541)))(CONNECT_DATA=
(SID=ora8db))) @..\..\portal30\admin\plsql\wws\cruser.sql
portal31 portal31 USERS TEMP us USERS
INSTALL_ACTION:installGlobalComponents() : ..\..\bin\sqlplus
portal31/portal31@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=
(PROTOCOL=TCP)(HOST=clmwin2ksrv)(PORT=1541)))(CONNECT_DATA=
(SID=ora8db))) @..\..\portal30\admin\plsql\wws\global.sql
portal31 portal31 USERS TEMP us USERS
INSTALL_ACTION:installGlobalComponents() :Loading Java class for
MD5 encryption...
INSTALL_ACTION:installGlobalComponents() : ..\..\bin\loadjava -
resolve -verbose -thin -user
portal31/portal31@clmwin2ksrv:1541:ora8db ..\..\portal30
\admin\plsql\wwc\SSOHash.class
D:\oracle\iSuites\assistants\opca>REM
D:\oracle\iSuites\assistants\opca>REM $Header:
runljava.bat@@/main/3 \
D:\oracle\iSuites\assistants\opca>REM Checked in on Fri Nov 17
15:32:36 PST 2000 by meoropez \
D:\oracle\iSuites\assistants\opca>REM Copyright (c) 2000 by
Oracle Corporation. All Rights Reserved. \
D:\oracle\iSuites\assistants\opca>REM $
D:\oracle\iSuites\assistants\opca>REM
D:\oracle\iSuites\assistants\opca>Rem For running the Loadjava
from the Configuration Assistant.
D:\oracle\iSuites\assistants\opca>..\..\bin\loadjava -resolve -
verbose -thin -user
portal31/portal31@clmwin2ksrv:1541:ora8db ..\..\portal30
\admin\plsql\wwc\SSOHash.class
STEP 5 : Creating SSO Schema...
INSTALL_ACTION: createSSOSchema() : ..\..\bin\sqlplus
SYS/<sys_password>@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=
(PROTOCOL=TCP)(HOST=clmwin2ksrv)(PORT=1541)))(CONNECT_DATA=
(SID=ora8db))) @..\..\portal30\admin\plsql\sso\ssodbusr.sql
portal31_sso USERS TEMP
ORA-04042: procedure, function, package, or package body does
not exist
Errors encountered in the Install process. Installation Aborted.
I can't make out what could be wrong with the ssodbusr.sql
script!! Iam trying to install the portal schema to an already
existing Oracle8i (8.1.6) database (SID-ora8db).
2) Do i really need this oracle PORTAL stuff?..all i want is
develop/deploy J2EE applications on Oracle9iAS. Unfortunately i
can't find any j2ee related info in the documentation except
about the installation of OC4J.zip (oracle container for j2ee)
which doesn't exists in my download!!
Can anyone please help me out...why is Oracle9iAS so
complicated as against the other commercial servers????
TIA
Clement

Hi Clement,
If you are using 9iAS 10221, You can install J2EE by choosing
the Core Installation Type, which is the first installation
type. It's so easy to install Core (which contains J2EE, Apache
and Webcache). And takes around 15 minutes.
If you are using 10220, it doesn't contain J2EE. So you may want
to upgrade to 10221 for your need. You'll find installation
for Core fast and easy. Hope it helps your need.
Thanks,
yuning

AudioMIDI MIDI configuration lost - how to get back?

Hi,
For no appearent reason I have just lost my MIDI configuration. when i click on the Applications/Utilities/AudioMidi configuration icon, it bombs out. Aftet 5-6 atempts it appears, but with the MIDI setup empty and complete inability to test/rescam/add MIDI devices.
However, if I go into the application/Utilities folde and type press control-click and open properties, go into application contents and go into the MacOS folder, I find the same AudioMidi Icon in that folder as in the Utilities list. when i click on THAT icon I get a screen that shows all of my MIDI setup. But it look like its just a graphic, it does not 're-initialize' my MIDI setup.
Might anyone know what to do to fix this aspect of tte MacOS? I don't know enough about this os to fix it.
I'm not sure how to fix this as I only have 10.3 on DVD and I'm currently on 10.3.9, so its not clear how an install would fix this (without wiping my disk which is definitely the most undesirable option). Would an upgrade to 10.4 fix this?
thanks,
Kevin Nolan.

Hi sumitbarkhade91,
I'm sorry to hear that your laptop was stolen. I would suggest contacting HP directly for assistance. There is a process for stolen units that the support group will follow.
If you live in the US, contact HP Here.
If you are in another part of the world, start Here.
Let us know how it goes!
*Although I am an HP employee, I am speaking for myself and not for HP.
*Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
* Click on "Purple Thumbs up" button to the left side of my post to say thanks!
Regards
Ahmed

Portal Configuration Assistant failedon 10g OAS

Hi,
I'm getting "Portal Configuration Assistant" failed error when trying to install OracleAS 10g (9.0.4.0.0)Applcation Server.
I did all the pre-install stuff. I was able to install Infrastructure without any problem under /ias/oraDB using 'ias:dba'
But when I tried to install Applcation Server/BI & Forms using 'ias:dba" under /ias/oraAS, I got following errors:
"Configuration Assistants" "Portal Configuration Assistant" failed.
Can anyone please Help me?
Thanks in advance.
Sakivs

ummm...not exactly sure what you mena when you say "using 'ias:dba'"

Oracle Portal Configuration Assistant will not connect

I am attempting to install an Oracle Portal 9iAS with the software provided in the book "Application Server Portal Handbook" by Seve Vandivier and Kelly Cox.
Ok, all goes well until I get to the Portal Configuration Assistant. I want to connect to the database (on a different box over the network) and install the repository.
No go. I cannot login. I know the password for SYS. but the connect descriptor it is looking for should be noodle:1521:fastdb (noodle is the host, 1521 the port, fastdb the SID).
I cannot figure out why this does not connect. If I open a SQLplus window on this computer, I can connect successfully, although this would use a TNS connection, which is not the same.
So, where am I going wrong?????
One more clue, the book talks about connecting to an Oracle 8i database, and I am trying to connect to an Oracle 9i database. Does this matter???
Any help would be appreciated!
Thanks,
Edward
[email protected]
http://www.1st-R8.com

Assuming you are installing 9ias Rel1 with portal 309.
Apply the RDBMS 8.1.7.4 patch to the 9ias Oracle Home and re-run the configuration assistant. It's been awhile since I've had to install Rel1, but that was the fix when we last asked oracle about it.

Problem getting Failure receipts

Hi,
I have a requirement to get the failure receipts when a mail is bounced back or when the server is not able to deliver the message. But with the following code im not getting the receipt for bounced mails. but with same code im able to get the successful delivery receipts.
public static void main(String[] args) {
          String arr1[]={"[email protected]"};
          SendingMail sendmail=new SendingMail();
          try {
               sendmail.postMail(arr1,"hii","this a test mail","[email protected]");
          } catch (MessagingException e) {
               System.out.println("In exception");
               e.printStackTrace();
     public void postMail(String recipients[], String subject, String message,
               String from) throws MessagingException {
          boolean debug = false;
          Properties props = new Properties();
          props.put("mail.smtp.host", SMTP_HOST_NAME);
          String dsn = "SUCCESS,FAILURE,DELAY " + from.trim();
          props.put("mail.smtp.dsn.notify", dsn);
          props.put("mail.smtp.from", "[email protected]");
          Session session = Session.getDefaultInstance(props, null);
          session.setDebug(debug);
          SMTPMessage msg = new SMTPMessage(session);
          // set the from and to address
          InternetAddress addressFrom = new InternetAddress(from);
          msg.setFrom(addressFrom);
          InternetAddress[] addressTo = new InternetAddress[recipients.length];
          for (int i = 0; i < recipients.length; i++) {
               addressTo[i] = new InternetAddress(recipients);
          msg.setRecipients(Message.RecipientType.TO, addressTo);
          msg.setSubject(subject);
          msg.setContent(message, "text/plain");
          msg.setNotifyOptions(SMTPMessage.NOTIFY_FAILURE|SMTPMessage.NOTIFY_SUCCESS);
          Map msgsByTransport = new HashMap();
          Address[] addresses=msg.getAllRecipients();
for (int i = 0; i < addresses.length; i++) {
Address address = addresses[i];
Transport transport = session.getTransport(address);
List addrs = (List) msgsByTransport.get(transport);
if (addrs == null) {
addrs = new ArrayList();
msgsByTransport.put(transport, addrs);
addrs.add(address);
for (Iterator i = msgsByTransport.entrySet().iterator(); i.hasNext();) {
Map.Entry entry = (Map.Entry) i.next();
Transport transport = (Transport) entry.getKey();
List addrs = (List) entry.getValue();
try {
transport.connect();
transport.sendMessage(msg, (Address[]) addrs.toArray(new Address[addrs.size()]));
System.out.println("done with sending to all addresses");
} catch (SendFailedException e) {
     System.out.println("in send failed exception");
Address[] exAddrs = e.getValidSentAddresses();
if (exAddrs != null) {
for (int j = 0; j < exAddrs.length; j++) {
System.out.println("Valid Address:"+exAddrs[j]);
exAddrs = e.getValidUnsentAddresses();
if (exAddrs != null) {
for (int j = 0; j < exAddrs.length; j++) {
System.out.println("Valid Unsent Address:"+exAddrs[j]);
exAddrs = e.getInvalidAddresses();
if (exAddrs != null) {
for (int j = 0; j < exAddrs.length; j++) {
System.out.println("Invalid Address:"+exAddrs[j]);
finally {
transport.close();
Can anyone let me know what is the problem with the code?I need to get failure receipts also.
Please this is a urgent requirement.

It's entirely up to the destination mail server whether it returns success or failure receipts.
You can do everything right and the mail server can still return nothing.
In your testing, is the destination mail server for the success case and the failure case the same?
Also, setting mail.smtp.dsn.notify is redundant if you're using SMTPMessage.setNotifyOptions.

Exchange 2010 SP3 - Test-OutlookConnectivity Failures

Test-OutlookConnectivity -Protocol TCP gives success on all tests. If I run Test-OutlookConnectivity -Protocol HTTP, I get failures on all . I'm trying to figure out why. We have a single CAS array in our main site with two servers.
We have a third server in our COLO location and there is no CAS for that site. Outlook Anywhere is not enabled.
If I run "Test-OutlookConnectivity -Protocol HTTP" at the main site, I get this error message:
Fatal Autodiscover failure EXPR = <Null>.
    + CategoryInfo          : OperationStopped: (Microsoft.Excha...onnectivityTask:TestOutlookConnectivityTask) [Test-
   OutlookConnectivity], FatalAutodiscoverException
    + FullyQualifiedErrorId : F70A1ED2,Microsoft.Exchange.Monitoring.TestOutlookConnectivityTask
    + PSComputerName        : ex1.domain.local
I get different messages altogether when I run tests from the COLO site. For both protocols I get the message:
An error occurred while trying to access mailbox EX2.domain.local, on behalf of user o2bancorp.local\extest_49ce0203
32a04
Additional information:
[Microsoft.Exchange.Data.Storage.WrongServerException]: The user and the mailbox are in different Active Directory sit
es..
    + CategoryInfo          : OperationStopped: (Microsoft.Excha...onnectivityTask:TestOutlookConnectivityTask) [Test-
   OutlookConnectivity], CasHealthStorageErrorException
    + FullyQualifiedErrorId : 6A829B37,Microsoft.Exchange.Monitoring.TestOutlookConnectivityTask
It seems to me that we don't have something setup properly in our environment. I think the reason that the lead Exchange admin does not have a CAS array defined for the COLO site is that some of our business locations that are part of the COLO site
and he doesn't want the Exchange server there servicing client requests except for in a DR scenario. He also has also had all receive connectors disabled. I enabled the two default receive connectors on the COLO Exchange server.

Hi Hollisorama,
Base on my knowledge, this command is used to test end-to-end Outlook connectivity scenario for Outlook Anywhere, however outlook anywhere is disabled in your environment. It is the reason why you will get error message when running the command.
I recommend you refer to the following article to enable outlook anywhere, and then test connectivity again:
Enable Outlook Anywhere
Best regard,
Niko Cheng
TechNet Community Support

BAM Portal configuration error in BizTalk Server 2013 R2

I have tried 2 attempts to build out a BizTalk Server 2013 R2, I have followed the MSDN Install instructions, and I keep on getting an error when configuring BAM Portal. I have the logfile available, I need to know what the experts need to see in order to
give me an answer. Understand that we have been using BizTalk Server 2013 for the last two years, and a new developer wants the R2 version and BAM Portal configured. As an administrator I have fought this to no end, and now I have enough evidence to go back
to our project manager and explain why you do not install every feature on a server. Prove me wrong EXPERTS!

" I need to know what the experts need to see in order to give me an answer."
Experts needs:
1) Little background of the issue you are facing.
2) The log file generated.
3) The configuration of your server.
"now I have enough evidence to go back to our project manager and explain why you do not install every
feature on a server."
Disagree, It is indeed possible to install all the components and feature on a server. Somewhere someone would have installed BizTalk 2013 R2 and all its components in exactly same server configuration successfully in which you are trying to achieve, the
only difference could be a missing Package, Patch, Cumulative Update, Service or any configuration miss at your end.
Pls read more about BizTalk 2013R2 installation on Installation Overview for BizTalk Server 2013 and 2013 R2.
Review the Hardware
and Software Requirements for BizTalk Server 2013 and 2013 R2.
Understand the Considerations
Before Installing BizTalk Server 2013 and 2013 R2.
Prepare Your Computer for Installation.
Specifically for BAM Portal. Microsoft has documented Prerequisites, Permissions and Considerations.
Planning for the BAM Portal
I would advice you to refer this post by Sandro . BAM Portal configuration error
Rachit

Portal configuration: when CIM test getting failure

Similar Messages

Maybe you are looking for