Portal connection test for connector giving error.

Hi All,
In the portal ,
No connection to system SAP_BW found:
com.sapportals.connector.connection.ConnectionFailedException: Connection Failed: A nested exception occurred. Could not initialize physical connection.
Connection Failed: A nested exception occurred. Could not initialize physical connection.
Connection Failed: A nested exception occurred. Could not create JCO connection.
No RFC authorization for function module RFCPING.
Can somebody help in this.
Thanks

But the message is pretty clear - "No RFC authorization for function module RFCPING." Assign authorization for mapped user (or current user in case of SSO)

Similar Messages

Connection test for connectors(SAP R3 system) fail

Hi,
I got an EP system and connected to one existing R/3 system.For the same i have defined it in system landscape of EP.System administration ---> system configuration ---> system landscape.In property editor i have deined all the min required properties.
Application Host       172.16.3.68
Gateway Host            172.16.3.68
Gateway Service        sapgw00
Logical System Name    ISCCLNT100
Remote Host Type       3
SAP Client            100
SAP System ID (SID)    ISC
SAP System Number      00
Server Port            3200
System Type            SAP_R3
Trace Mode             1
The system intially works fine.But when
1)There are more users it gives connection error.
2)If there are not much users then also After some time it automatically shows connection error.
Then when I do Connection Test for Connectors,it shows "X" failed.
What I usally try to do,I restart the SQL server.
But this method does not work.I have to restart the EP.Then again the system works fine.
I think there are something wrong input in the property value of SAP R3 object setting.
Hey folks can u please help me in sorting out this problem?Why such connection error happens again and again?

Hi Rajeev,
Thanks for your answer.Actaully I have miss interpreted the problem.Sorry Problem is not with in the SAP R3.
Connection problem is like this::
I have defined a system EPSQL(system alias for MS SQL sever DB) for my EP instance
To connect to database.
The connection tests to the alias is ok.
But as more and more users try connecting to the db the connection test fails.
Restarting the SQL server doesnt help.
I have to restart the EP instance to get over the problem
I think there are something wrong input in the property value of object setting.or,EP maintains some timeout or max user info...
Do u have any solution?

Error during connection test for Content Producers in FPN

Hi,
I have a question regarding connection test for content producers in FPN. Please let me explain the scenario,
The portal server (PS1) is in the network domain say "XYZ.com" and we are accessing the portal from different domain say "ABC.com" via browser. We need to configure another portal (PS2) which is in the network domain say "mno.XYZ.com" with PS1 using FPN. We have imported the certificates of portal PS1 (consumer) in PS2 (producer) portal server and done the required trust configurations using VA in PS2 portal server.
Then we created a new content producer object for the PS2 portal (producer) in PS1 portal. But when we did the "Connection Tests" it gets failed with the following error message,
"Could not retrieve the WSDL file; the handshake URL may not exist or may be invalid".
Can any one please tell me why this error message is coming. Is it due to any network connection issue?
Thanks,
Gokul.

Hi Ginger,
somehow, yes :-) I deployed the iFlow for customer master replication. After creating a customer the trace looked different and terminated at the reverse proxy. So the simple connect somehow is not able to do the same...
Cheers
Florian

New R12 install: Apps ORACLE_HOME connection test has returned an error:

Hi guys,
New to R12 apps. Installing 2node R12 on linux 5R9. Database installed fine. Called rapidwiz from node 2 and used conf_PROD.txt i moved from database sever. Failing however with error with Database Availability red exclaimed and every other box red x'd except ODBC and environment file in green at post install check. Where do i start troubleshooting my issue please. thanks.
-Richard.
RW-50011: Error: - Apps ORACLE_HOME connection test has returned an error: 4
LOGS:
/d02/oracle/PROD/inst/apps/PROD_ovm2/admin/log/ohclone.log
Executing command sh -c "/d02/oracle/PROD/apps/tech_st/10.1.2/opmn/bin/opmnctl stopall ; echo ERRORCODE = $? ERRORCODE_END" Sun Mar 03 08:02:50 CST 2013
Command returned
opmnctl: opmn is not running
ERRORCODE = 0 ERRORCODE_END
.end std out.
/d02/oracle/PROD/apps/tech_st/10.1.2/opmn/bin/opmnctl: line 636: /d2/R12/ab/apps/R1211XB9/apps/tech_st/10.1.2/opmn/bin/opmn: No such file or directory
.end err out.
Command sh -c "/d02/oracle/PROD/apps/tech_st/10.1.2/opmn/bin/opmnctl stopall ; echo ERRORCODE = $? ERRORCODE_END" completed successfully. Sun Mar 03 08:02:51 CST 2013
OPMN shutdown successfull
deleting ojmisc file (copied earlier) at /d02/oracle/PROD/apps/tech_st/10.1.2/jdk/jre/lib/ext/ojmisc.jar
ApplyAppsTechStack_03030802.log
adlnktools.sh started at Sun Mar 3 08:02:51 CST 2013
Log file located at /d02/oracle/PROD/inst/apps/PROD_ovm2/logs/ora/10.1.2/install/make_03030802.log
/d02/oracle/PROD/apps/tech_st/10.1.2/bin/OracleAS_Relink_Patch.sh: line 10: /d2/R12/ab/apps/R1211XB9/apps/tech_st/10.1.2/install/oracle_relink_patch.log: No such file or directory
/d02/oracle/PROD/apps/tech_st/10.1.2/bin/OracleAS_Relink_Patch.sh: line 11: /d2/R12/ab/apps/R1211XB9/apps/tech_st/10.1.2/install/oracle_relink_patch.out: No such file or directory
/d02/oracle/PROD/apps/tech_st/10.1.2/bin/OracleAS_Relink_Patch.sh: line 23: /d2/R12/ab/apps/R1211XB9/apps/tech_st/10.1.2/install/oracle_relink_patch.log: No such file or directory
Error while running adlnktools.sh.
return code = .16.17.18.21.22.23.24.25.32.33.34.36.37.38
Please check logfile located at /d02/oracle/PROD/inst/apps/PROD_ovm2/logs/ora/10.1.2/install/make_03030802.log
/d02/oracle/PROD/inst/apps/PROD_ovm2/logs/ora/10.1.2/install/make_03030802.log
0.1.2/jdk/jre/lib/i386/client:/d2/R12/ab/apps/R1211XB9/apps/tech_st/10.1.2/jdk/jre/lib/i386 -Wl,--allow-shlib-undefined `cat /d02/oracle/PROD/apps/tech_st/10.1.2/lib/sysliblist` -ldl -lm
/usr/bin/ld: cannot find -ljava
collect2: ld returned 1 exit status
make: *** [d02/oracle/PROD/apps/tech_st/10.1.2/sysman/lib/libnmefsql.so] Error 1
Failed linking target libnmefsql on Sun Mar 3 08:02:56 CST 2013...
/usr/bin/ld: cannot find -ljava
collect2: ld returned 1 exit status
make: *** [d02/oracle/PROD/apps/tech_st/10.1.2/sysman/lib/emagtm] Error 1
Error found while relinking
return code = .16.17.18.21.22.23.24.25.32.33.34.36.37.38
ApplyApplTop_03030824.log
Skipping prodsetup driver processing; driver file not found at: /media/sf_allshare/stage/startCD/Disk1/rapidwiz//apps/driver/ovm2_prodsetup.drv
ApplyApplTop Completed Successfully.
Edited by: 991478 on Mar 3, 2013 10:28 AM

I fear that my issue is somehow related to missing rpms....i see this in the make log for 10.1.2 home
/usr/bin/ld: cannot find -ljava
collect2: ld returned 1 exit status
make: *** [d02/oracle/PROD/apps/tech_st/10.1.2/sysman/lib/libnmefvr.so] Error 1
Failed linking target libnmefvr on Tue Mar 5 10:59:47 CST 2013...
My rpms look as though i have them all. C anything i might be missing still please?
[root@ovm2 ~]# rpm -qa --queryformat "%{NAME}-%{VERSION}.%{RELEASE} (%{ARCH})\n" |grep compat-libgcc
compat-libgcc-296-2.96.138 (i386)
[root@ovm2 ~]# rpm -qa --queryformat "%{NAME}-%{VERSION}.%{RELEASE} (%{ARCH})\n" |grep compat-libstdc++
compat-libstdc++-296-2.96.138 (i386)
compat-libstdc++-33-3.2.3.61 (i386)
compat-libstdc++-33-3.2.3.61 (x86_64)
[root@ovm2 ~]# rpm -qa --queryformat "%{NAME}-%{VERSION}.%{RELEASE} (%{ARCH})\n" |grep compat-libgcc
compat-libgcc-296-2.96.138 (i386)
[root@ovm2 ~]# rpm -qa --queryformat "%{NAME}-%{VERSION}.%{RELEASE} (%{ARCH})\n" |grep compat-gcc
[root@ovm2 ~]# rpm -qa --queryformat "%{NAME}-%{VERSION}.%{RELEASE} (%{ARCH})\n" |grep gcc
gcc-c++-4.1.2.54.el5 (x86_64)
compat-libgcc-296-2.96.138 (i386)
libgcc-4.1.2.54.el5 (i386)
gcc-4.1.2.54.el5 (x86_64)
gcc-4.1.2.54.el5 (i386)
libgcc-4.1.2.54.el5 (x86_64)
gcc-c++-4.1.2.54.el5 (i386)
gcc-gfortran-4.1.2.54.el5 (x86_64)
[root@ovm2 ~]# rpm -qa --queryformat "%{NAME}-%{VERSION}.%{RELEASE} (%{ARCH})\n" |grep glibc
glibc-common-2.5.107 (x86_64)
glibc-common-2.5.107 (i386)
glibc-devel-2.5.107 (x86_64)
glibc-devel-2.5.107 (i386)
glibc-2.5.107 (x86_64)
glibc-2.5.107 (i686)
glibc-headers-2.5.107 (x86_64)
glibc-headers-2.5.107 (i386)
[root@ovm2 ~]# rpm -qa --queryformat "%{NAME}-%{VERSION}.%{RELEASE} (%{ARCH})\n" |grep oracle
oracle-validated-1.1.0.17.el5 (x86_64)
oracle-linux-5.0.0.9.el5 (noarch)
oracle-logos-4.9.17.10 (noarch)
oraclelinux-release-5.9.0.2 (x86_64)
[root@ovm2 ~]# rpm -qa --queryformat "%{NAME}-%{VERSION}.%{RELEASE} (%{ARCH})\n" |grep oracle-validated
oracle-validated-1.1.0.17.el5 (x86_64)
[root@ovm2 ~]# rpm -qa --queryformat "%{NAME}-%{VERSION}.%{RELEASE} (%{ARCH})\n" |grep libc
glibc-common-2.5.107 (x86_64)
glibc-common-2.5.107 (i386)
libcap-1.10.26 (x86_64)
libcap-devel-1.10.26 (x86_64)
glibc-devel-2.5.107 (x86_64)
libcap-devel-1.10.26 (i386)
glibc-devel-2.5.107 (i386)
glibc-2.5.107 (x86_64)
libcroco-0.6.1.2.1 (x86_64)
glibc-2.5.107 (i686)
libcap-1.10.26 (i386)
libcroco-devel-0.6.1.2.1 (x86_64)
glibc-headers-2.5.107 (x86_64)
libcroco-0.6.1.2.1 (i386)
glibc-headers-2.5.107 (i386)
[root@ovm2 ~]# rpm -qa --queryformat "%{NAME}-%{VERSION}.%{RELEASE} (%{ARCH})\n" |grep libgomp
libgomp-4.4.7.1.el5 (x86_64)
libgomp-4.4.7.1.el5 (i386)
[root@ovm2 ~]# rpm -qa --queryformat "%{NAME}-%{VERSION}.%{RELEASE} (%{ARCH})\n" |grep libXp
libXpm-3.5.5.3 (x86_64)
libXpm-3.5.5.3 (i386)
libXp-1.0.0.8.1.el5 (i386)
libXp-1.0.0.8.1.el5 (x86_64)
libXpm-devel-3.5.5.3 (x86_64)
[root@ovm2 ~]# rpm -qa --queryformat "%{NAME}-%{VERSION}.%{RELEASE} (%{ARCH})\n" |grep make
automake16-1.6.3.8.el5.1 (noarch)
automake-1.9.6.2.3.el5 (noarch)
make-3.81.3.el5 (x86_64)
automake14-1.4p6.13.el5.1 (noarch)
imake-1.0.2.3 (x86_64)
automake15-1.5.16.el5.2 (noarch)
automake17-1.7.9.7.el5.2 (noarch)
[root@ovm2 ~]# rpm -qa --queryformat "%{NAME}-%{VERSION}.%{RELEASE} (%{ARCH})\n" |grep compat
java-1.4.2-gcj-compat-1.4.2.0.40jpp.115 (x86_64)
compat-libgcc-296-2.96.138 (i386)
compat-libstdc++-296-2.96.138 (i386)
avahi-compat-libdns_sd-0.6.16.10.el5_6 (x86_64)
compat-libstdc++-33-3.2.3.61 (i386)
xorg-x11-libs-compat-6.8.2.1.EL.33.0.1 (i386)
compat-libstdc++-33-3.2.3.61 (x86_64)
[root@ovm2 ~]# rpm -qa --queryformat "%{NAME}-%{VERSION}.%{RELEASE} (%{ARCH})\n" |grep unix
unixODBC-libs-2.2.11.10.el5 (x86_64)
unixODBC-libs-2.2.11.10.el5 (i386)
unixODBC-devel-2.2.11.10.el5 (x86_64)
unix2dos-2.2.26.2.3.el5 (x86_64)
dos2unix-3.1.27.2.el5 (x86_64)
unixODBC-2.2.11.10.el5 (i386)
unixODBC-2.2.11.10.el5 (x86_64)
unixODBC-devel-2.2.11.10.el5 (i386)
[root@ovm2 ~]# rpm -qa --queryformat "%{NAME}-%{VERSION}.%{RELEASE} (%{ARCH})\n" |grep libaio
libaio-devel-0.3.106.5 (i386)
libaio-0.3.106.5 (x86_64)
libaio-0.3.106.5 (i386)
libaio-devel-0.3.106.5 (x86_64)
[root@ovm2 ~]# rpm -qa --queryformat "%{NAME}-%{VERSION}.%{RELEASE} (%{ARCH})\n" |grep elf
elfutils-libelf-0.137.3.el5 (x86_64)
elfutils-libs-0.137.3.el5 (x86_64)
elfutils-0.137.3.el5 (x86_64)
elfutils-libelf-0.137.3.el5 (i386)
elfutils-libelf-devel-static-0.137.3.el5 (x86_64)
elfutils-libelf-devel-0.137.3.el5 (x86_64)
[root@ovm2 ~]# rpm -qa --queryformat "%{NAME}-%{VERSION}.%{RELEASE} (%{ARCH})\n" |grep gdbm
gdbm-1.8.0.28.el5 (i386)
gdbm-devel-1.8.0.28.el5 (i386)
gdbm-1.8.0.28.el5 (x86_64)
gdbm-devel-1.8.0.28.el5 (x86_64)
[root@ovm2 ~]# rpm -qa --queryformat "%{NAME}-%{VERSION}.%{RELEASE} (%{ARCH})\n" |grep sysstat
Only missing rpm is see is binutils i386. There is the 86x64. Installing that now.....and will re install APPSSTACK.
Verions chosen is binutils-2.17.50.0.6-9.0.1.el5.i386.rpm and presnt is it 86X64.
Edited by: 991478 on Mar 5, 2013 9:59 AM

Error while doing connection test for a jdbc system

Hi all,
i created a JDBC system. i gave all the required information for creating it like username, passowrd, connection URL, driver class name.
i even did the user mapping. But still when i try the connetion test it is giving me an error.
the error message that is visible in the front end is like follows
Test Connection with Connector - Jan 1, 1970 2:29:41 PM
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this system object
Results
Retrieval of default alias successful
Connection failed. Make sure user mapping is set correctly and all connection properties are correct.
when i c the log files i noticed the following log messages

#1.5#00065BF80BD800660000000000000C6C000414205F93044C#1148029181853#/System/Server#sap.com/irj#com.sap.portal.ivs.semantic.systemLandscape#Administrator#435####cf4424d0e71511da940a00065bf80bd8#D:/Triniti_Deployment_Source/infrastructure/fdt/WEB-INF/classes
fdtout.log##0#0#Warning#1#com.sap.portal.ivs.semantic.systemLandscape#Java###Failed to retrieve Password##
#1.5#00065BF80BD800660000000100000C6C000414205F93059D#1148029181853#/System/Server#sap.com/irj#com.sap.portal.ivs.semantic.systemLandscape#Administrator#435####cf4424d0e71511da940a00065bf80bd8#D:/Triniti_Deployment_Source/infrastructure/fdt/WEB-INF/classes
fdtout.log##0#0#Warning#1#com.sap.portal.ivs.semantic.systemLandscape#Java###Failed to retrieve User##
#1.5#00065BF80BD800660000000200000C6C000414205F930770#1148029181853#/System/Server#sap.com/irj#com.sap.portal.ivs.connectorService#Administrator#435####cf4424d0e71511da940a00065bf80bd8#D:/Triniti_Deployment_Source/infrastructure/fdt/WEB-INF/classes
fdtout.log##0#0#Error#1#com.sap.portal.ivs.connectorService#Java###Failed to get connection for system #1#Dummy_JDBC_System#

can any one please tell me where i am going wrong.
thanks in advance
Pavan Kumar.

Hi Pavan
i see the log file that u provide
check ur connection properties.
further also check following might help u
http://help.sap.com/saphelp_nw2004s/helpdata/en/29/acd8403e37762ae10000000a155106/frameset.htm
also look at sap note 773401
regards,
kaushal
Message was edited by: kaushal malavia

RWB - Cache Connectivity Test - Adapter Engine shows error

Hello Friends,
In our one production system (PI 7.1), while do 'Cache Connectivity Test' from RWB -> Component Monitoring, it shows the following error for Adapter Engine under Integration Directory.
Error:
Cache notification from Integration Directory failed Error when accessing the System Landscape Directory.
No SLD elements of type SAP_XIAdapterFramework found
But, Integration Server - ABAP, Integration Server - JAVA shows green color. The messages are flowing through the Adapter Engine fine. i.e I am seeing 2 Adapter Engines under Integration Server in Component Monitoring. One Adapter Engine is in grey and another Adapter Engine shows green color.
When I click the grey color adapter engine, it immediately turns to red color and some different host name url is displayed (http://<wronghost>:53000/AdapterFramework/rtc).
So, what could be the problem ?
Kindly clarify, friends.
Thanking you.
Kind regards,
Jegathees P.

Hello Jegathees
Apply the solution in note #804124 HTTP communication with XI Adapter Engine fails. Set the parameters:
SLD.selfregistration.hostName
SLD.selfregistration.httpPort
SLD.selfregistration.httspPort
as described in the note.
Regards
Mark

Function Module to perform authorization and connect test for given RFC

Hello Experts,
I am working on request, which requires checking the RFC status.ie whether both Connection Test and Authorization test is OK for a given RFC.
Please help me in finding the function module for the above request.
Thanks in advance!!!!!!!
Thanks,
Karthik

Hi Karthik,
For connection test you can use RFC_PING as said by Thomas, for checking authorization using Uname/PWD etc use RFC_LOGIN.
My Bad - You cannot use RFC_LOGIN, you can try with RFC_LOGIN_INFO and check the parameter "RFC_LOGIN_COMPLETE".
Regards,
Chen
Edited by: Chen K V on Jun 3, 2011 2:16 PM
Edited by: Chen K V on Jun 3, 2011 2:23 PM

SAP Lumira 1.17 Connectivity with ECC 6 giving error

Hi Expert,
We're on SAP Lumira 1.17 and I'm getting attached error when I'm connecting with EC 6 via Query with SQL. I've attached the error log. Can you someone please look into this , how can I resolve this error to connect with ECC.
I'm trying

Hi Antoine,
Thanks for response.
Are you able to connect to this ECC system using either:
- a SAP tool like SAP logon
Yes, I can.
- a BI tool like information design tool (if you have access to it)
Yes, I can access. I can also connect UNX universe which is built on ECC with Webi as well. It's only in Lumira which is not working.
-Can you try from SAP Lumira changing the language used?
Yes, I tried to change different language (US and UK both) but not working.
-As the base error from your log file raised from ECC is
This error log is generated from Lumira only.
Thanks,
Pawan

Interesting test for report compilation error

I just tried to figure the compilation error I had and I ran
into this :
I delete all fields on my report so the report was empty.
Then I added the backgroud color to the Report header session and
ran the report, it worked fine. Then I add the Label on top of
report header session then I got this error:
Report compilation error. Error at (32, 20: null
Is there a bug on the report or just my problem?
Help!!

Similar issue here. It happens with just a few reports. I can compile them on reports builder, but not using rwconverter.sh I am using 11.1.2.
Any clues so far?

System Connection Test was not fully tested but all web dynpro java app and Transaction iviews working fine.Any problem for this Kind of activity Lets give some idea.

System Connection Tests
You can test the connectivity to the backend application represented by the current system object. Choose the relevant tests.
Note: The test is based on the properties currently defined in the system object. It does not check if the system properties are correct.
System Connection Tests
Test Name
Description
Status
SAP Web AS Connection
Tests the connection to an SAP Web Application Server
ITS Connection
Tests the connection to an SAP ITS server
Connection Test for Connectors
Tests the connection to a backend system using an associated connector
Test
Clear Results
Results
SAP Web AS Connection
Test Details:
The test consists of the following steps:
1. Checks the validity of system ID in the system object.
2. Checks if the system can be retrieved from the PCD.
3. Check whether a SAP system is defined in the system object
4. Validate the following parameters: WAS protocol; WAS host name
5. Checks if the host name of the server can be resolved.
6. Pings the WAS ping service; works only if the service is activated on the ABAP WAS.
7. Checks HTTP/S connectivity to the defined back-end application
Results
1. The system ID is valid
2. The system was retrieved.
3. The system object represents an SAP system
4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name
5. The host name ssprdxi.stylespasapnet.com was resolved successfully.
6. The Web AS ping service was pinged successfully.
7. An HTTP/S connection to was obtained successfully.
ITS Connection
Test Details:
The test consists of the following steps:
1. Checks the validity of system ID in the system object.
2. Checks if the system can be retrieved from the PCD.
3. Check whether the system object has a valid system alias
4. Check whether a SAP system is defined in the system object
5. Validate the following parameters: ITS protocol; ITS host name
6. Checks if the host name of the server can be resolved.
7. Checks HTTP/S connectivity to the defined back-end application
Results
1. The system ID is valid
2. The system was retrieved.
3. Retrieval of the default alias was successful
4. The system object represents an SAP system
5. The following parameters are valid: ITS Protocol (http) ITS Host Name ()
6. The host name ssprdxi.stylespasapnet.com was resolved successfully.
7. An HTTP/S connection to was obtained successfully.
Test Connection with Connector
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this system object
Results
Retrieval of default alias successful
Connection failed. Make sure that Single Sign-On is configured correctly
regards
Antony

Hi Stefan,
This correct see SAP Note [947081|https://service.sap.com/sap/support/notes/947081]
If the locale for the Web Dynpro iView is changed in the portal (through portal personalization), this is not reflected in the running login session. The user needs to logoff and login again, in order to see the locale change in the Web Dynpro iView.
Regards,
Leo

Error in SAP Web AS Connection Test

Connection Test for Connectors is successful
But
SAP Web AS Connection
Test Details:
The test consists of the following steps:
1. Checks the validity of system ID in the system object.
2. Checks if the system can be retrieved from the PCD.
3. Check whether a SAP system is defined in the system object
4. Validate the following parameters: WAS protocol; WAS host name
5. Checks if the host name of the server can be resolved.
6. Pings the server to see if it is alive.
7. Pings the WAS ping service; works only if the service is activated on the ABAP WAS.
8. Checks HTTP/S connectivity to the defined back-end application
Results
1. The system ID is valid
2. The system was retrieved.
3. The system object represents an SAP system
4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (semdev.suzlon.com:8000)
5. The host name semdev.suzlon.com was resolved successfully.
6. The server semdev.suzlon.com could not be pinged successfully.
What culd be the pblm ?

Hi PK,
in R/3 go to SE37 and check the FM RSBB_URL_PREFIX_GET it will show the details for WAS, I believe the details you gave for WAS are fine.
Now for the issue go to T.Code SICF navigate to the webas path and activate the ping service. This will resolve the issue.
Hope This helps.
Cheers-
Pramod
Reward points if Helpful.

I can't connect with using connector

Hi,
I want to create a system(Solman 4.0) in Portal.I have created a SAP system using dedicated application server and then I filled all necessary fields.I tested with using system connection test.There are two test nameS(SAP Web AS Connection and Connection test for Connectors)Firstly, I checked WAS Connection and everything was ok but when I tested "Connection Test for Connectors" it didn't work.When I clicked test button, it said "Connection failed. Make sure user mapping is set correctly and all connection properties are correct" but I didn't use UIDPW.I used the Logon Ticket method and system_type is SAP_CRM but when I checked log file, it said this message "(R3/BW) Failed to get connection. Please contact your admin".I didin't understand because I have already used SAP_CRM syte sytem type.Why do I get this message. In addition, The ume.usermapping.unsecure is already on TRUE.In short, I can't connect with using connector.What's the problem?

Hi Vijith,
I perform your suggestion and I got an error message.This error message is written below.
Exception in SAP Application Integrator occured: Unable to parse template '<System.ConnectionString>'; the problem occured at position 0. Cannot process expression <System.ConnectionString> because Invalid System Attribute: System: 'SAP_LocalSystem', Attribute: 'ConnectionString'. .
There is a connection string error but I didn't use by using connection string method.I have used by using dedicated application server. At the same time, I have another error message in the dev_jrfc.trc.This error message is as fallows
Error> occured >Mon May 07 09:18:37,334< >RfcGetException rc (7) message: The system is unable to interpret the SSO ticket received
<RfcGetException
What's your comment?

BI iview when published in portal is giving error

HI,
Portal Runtime Error
An exception occurred while processing your request
Exception id: 12:09_09/04/08_0074_336182350
See the details for the exception ID in the log file.
This is the error , I am getting
When we are publishing from WAD to portal , it is giving the Portal Runtime Error.
If we create the same one step by step manualy it is giving the result.
Difference I found is in both the iviews is : System - BI (alias of logical system in the landscape)
Manually created Iview , System : Sap_LocaSystem
For BI system all the connection tests it is giving successful results .
And in RSPOR_SETUP program , result I found
Status 9 - No check with Portal SID <PORTAL_SID>
Status 10 - No check with Portal SID <PORTAL_SID>
Is this 9, 10 properties should be corrected ?
Thanks and Regards,
Srini

The error in the trace file is :
com.sap.security.core.persistence.imp.PrincipalDatabag Thu Apr 10 13:35:00 AST 2008
UniqueID: UACC.PRIVATE_DATASOURCE.un:index_service
Type: UACC
Home data source: PRIVATE_DATASOURCE
Private id part: un:index_service
Principal exists.
"com.sap.security.core.usermanagement"|->"SecurityPolicy" (no time limit)=
"com.sap.security.core.usermanagement"|->"lastsuccessfulpasswordcheck" (no time limit)=
"com.sap.security.core.usermanagement"|->"validfrom" (no time limit)=
"com.sap.security.core.usermanagement"|->"lastsuccessfullogon" (no time limit)=
"com.sap.security.core.usermanagement"|->"validto" (no time limit)=
"com.sap.security.core.usermanagement"|->"ispassworddisabled" (no time limit)=
"com.sap.security.core.usermanagement"|->"j_user" (no time limit)="index_service"
"com.sap.security.core.usermanagement"|->"lastpasswordchange" (no time limit)=
"com.sap.security.core.usermanagement"|->"userid" (no time limit)="USER.PRIVATE_DATASOURCE.un:index_service"
"com.sap.security.core.usermanagement"|->"previoussuccessfullogon" (no time limit)=
"com.sap.security.core.usermanagement"|->"lockreason" (no time limit)=
"com.sap.security.core.usermanagement"|->"lastfailedlogon" (no time limit)=
"com.sap.security.core.usermanagement"|->"successfullogoncount" (no time limit)=
"com.sap.security.core.usermanagement"|->"passwordchangerequired" (no time limit)=
"com.sap.security.core.usermanagement"|->"failedlogonattempts" (no time limit)=
"com.sap.security.core.usermanagement"|->"islocked" (no time limit)=
"$serviceUser$"|->"SERVICEUSER_ATTRIBUTE" (no time limit)="IS_SERVICEUSER"
#1.5 #00144F94DC4800A100000DF600002DBF00044A825E981C1D#1207823700073#com.sap.security.core.imp#sap.com/irj#com.sap.security.core.imp.[cf=com.sap.security.core.imp.AbstractUserAccount][md=constructor][cl=30114]#J2EE_GST_EPD#0####b4e72140030c11ddada100144f94dc48#Thread[ThreadPool.Worker5,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Path##Plain###Exiting method#
#1.5 #00144F94DC4800A100000DF700002DBF00044A825E983307#1207823700074#com.sap.security.core.imp#sap.com/irj#com.sap.security.core.imp.[cf=com.sap.security.core.imp.AbstractPrincipal][md=getPrincipalDatabagValues][cl=30114]#J2EE_GST_EPD#0####b4e72140030c11ddada100144f94dc48#Thread[ThreadPool.Worker5,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Debug##Java###null
[EXCEPTION]
#1#java.lang.Exception: LazyFetch: "UACC.PRIVATE_DATASOURCE.un:index_service"-->"com.sap.security.core.usermanagement","displayname".
 at com.sap.security.core.imp.AbstractPrincipal.getPrincipalDatabagValues(AbstractPrincipal.java:1729)
 at com.sap.security.core.imp.AbstractPrincipal.getAttributeValueString(AbstractPrincipal.java:1782)
 at com.sap.security.core.imp.AbstractUserAccount.getDisplayName(AbstractUserAccount.java:2238)
 at com.sap.security.core.imp.UserAccountWrapper.getDisplayName(UserAccountWrapper.java:509)
 at com.sapportals.portal.security.usermanagement.User50_Impl.getDisplayId(User50_Impl.java:222)
 at sun.reflect.GeneratedMethodAccessor600.invoke(Unknown Source)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:324)
 at com.sapportals.portal.security.usermanagement.WrappedUserInvocationHandler.callOtherMethod(ServiceUserFactoryImpl.java:172)
 at com.sapportals.portal.security.usermanagement.WrappedUserInvocationHandler.invoke(ServiceUserFactoryImpl.java:147)
 at $Proxy10.getDisplayId(Unknown Source)
 at com.sapportals.config.fwk.IConfigClientContext.<init>(IConfigClientContext.java:84)
 at com.sapportals.config.fwk.IConfigClientContext.createContext(IConfigClientContext.java:132)
 at com.sapportals.config.fwk.IConfigClientContext.createContext(IConfigClientContext.java:118)
 at com.sap.workflow.cfg.AbstractConfiguration.<init>(AbstractConfiguration.java:279)
 at com.sap.workflow.cfg.SchedulerConfiguration.<init>(SchedulerConfiguration.java:22)
 at com.sap.workflow.es.scheduler.TaskSchedulerDeadline.run(TaskSchedulerDeadline.java:63)
 at com.sapportals.wcm.service.scheduler.SchedulerEntry.run(SchedulerEntry.java:174)
 at com.sapportals.wcm.service.scheduler.crt.PoolWorker.run(PoolWorker.java:108)
 at java.lang.Thread.run(Thread.java:534)
#1.5 #00144F94DC4800A100000DF800002DBF00044A825E983D07#1207823700081#com.sap.security.core.imp#sap.com/irj#com.sap.security.core.imp.[cf=com.sap.security.core.locking.imp.LockManager][md=escapePrincipalID][cl=30114]#J2EE_GST_EPD#0####b4e72140030c11ddada100144f94dc48#Thread[ThreadPool.Worker5,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Debug##Plain###Mapped principalid for locking: "UACC.PRIVATE_DATASOURCE.un:index_service"-->"000_bTtZDFaWpfKiQ131rUhvSA=="#
#1.5 #00144F94DC4800A100000DF900002DBF00044A825E985131#1207823700087#com.sap.security.core.imp#sap.com/irj#com.sap.security.core.imp.[cf=com.sap.security.core.locking.imp.LockManager][md=escapePrincipalID][cl=30114]#J2EE_GST_EPD#0####b4e72140030c11ddada100144f94dc48#Thread[ThreadPool.Worker5,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Debug##Plain###Mapped principalid for locking: "UACC.PRIVATE_DATASOURCE.un:index_service"-->"000_bTtZDFaWpfKiQ131rUhvSA=="#
#1.5 #00144F94DC4800A100000DFA00002DBF00044A825E985A12#1207823700089#com.sap.security.core.imp#sap.com/irj#com.sap.security.core.imp.[cf=com.sap.security.core.locking.imp.LockManager][md=escapePrincipalID][cl=30114]#J2EE_GST_EPD#0####b4e72140030c11ddada100144f94dc48#Thread[ThreadPool.Worker5,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Debug##Plain###Mapped principalid for locking: "USER.PRIVATE_DATASOURCE.un:index_service"-->"000_zCZ7K+TFQWRbSAklTiJDwQ=="#
#1.5 #00144F94DC4800A100000DFB00002DBF00044A825E98710D#1207823700095#com.sap.security.core.imp#sap.com/irj#com.sap.security.core.imp.[cf=com.sap.security.core.locking.imp.LockManager][md=escapePrincipalID][cl=30114]#J2EE_GST_EPD#0####b4e72140030c11ddada100144f94dc48#Thread[ThreadPool.Worker5,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Debug##Plain###Mapped principalid for locking: "USER.PRIVATE_DATASOURCE.un:index_service"-->"000_zCZ7K+TFQWRbSAklTiJDwQ=="#
#1.5 #00144F94DC4800A100000DFC00002DBF00044A825E988C3D#1207823700097#com.sap.security.core.imp#sap.com/irj#com.sap.security.core.imp.[cf=com.sap.security.core.imp.AbstractPrincipal][md=getPrincipalDatabagValues][cl=30114]#J2EE_GST_EPD#0####b4e72140030c11ddada100144f94dc48#Thread[ThreadPool.Worker5,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Debug##Java###null
[EXCEPTION]
#1#java.lang.Exception: LazyFetch: "USER.PRIVATE_DATASOURCE.un:index_service"-->"com.sap.security.core.usermanagement","description".
 at com.sap.security.core.imp.AbstractPrincipal.getPrincipalDatabagValues(AbstractPrincipal.java:1729)
 at com.sap.security.core.imp.AbstractPrincipal.getAttributeValueString(AbstractPrincipal.java:1782)
 at com.sap.security.core.imp.AbstractPrincipal.getDescription(AbstractPrincipal.java:667)
 at com.sap.security.core.imp.AbstractPrincipal.getAttribute(AbstractPrincipal.java:309)
 at com.sap.security.core.imp.User.getAttribute(User.java:1006)
 at com.sap.security.core.imp.UserWrapper.getAttribute(UserWrapper.java:321)
 at com.sapportals.portal.security.usermanagement.User50_Impl.getValuesForKey(User50_Impl.java:760)
 at com.sapportals.portal.security.usermanagement.User50_Impl.getDescription(User50_Impl.java:474)
 at sun.reflect.GeneratedMethodAccessor601.invoke(Unknown Source)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:324)
 at com.sapportals.portal.security.usermanagement.WrappedUserInvocationHandler.callOtherMethod(ServiceUserFactoryImpl.java:172)
 at com.sapportals.portal.security.usermanagement.WrappedUserInvocationHandler.invoke(ServiceUserFactoryImpl.java:147)
 at $Proxy10.getDescription(Unknown Source)
 at com.sapportals.config.fwk.IConfigClientContext.<init>(IConfigClientContext.java:87)
 at com.sapportals.config.fwk.IConfigClientContext.createContext(IConfigClientContext.java:132)
 at com.sapportals.config.fwk.IConfigClientContext.createContext(IConfigClientContext.java:118)
 at com.sap.workflow.cfg.AbstractConfiguration.<init>(AbstractConfiguration.java:279)
 at com.sap.workflow.cfg.SchedulerConfiguration.<init>(SchedulerConfiguration.java:22)
 at com.sap.workflow.es.scheduler.TaskSchedulerDeadline.run(TaskSchedulerDeadline.java:63)
 at com.sapportals.wcm.service.scheduler.SchedulerEntry.run(SchedulerEntry.java:174)
 at com.sapportals.wcm.service.scheduler.crt.PoolWorker.run(PoolWorker.java:108)
 at java.lang.Thread.run(Thread.java:534)
Any help ????
thanks ,
Srini

Test connection failed for resource(s): AD: == No route to host\n

Hi, First of all I would like to tell you that the application was running fine few days back, this issue has come suddenly.
I am getting following error while doing connection test for AD with SUN IDM:
Test connection failed for resource(s): AD: ==> No route to host\n
and when I try to open the detail for windows active directory arrow mark from the resource tab, Its giving me below error:
Error iterating over objects ==> com.waveset.util.WavesetException: ==>java.net.NoRouteToHostException: No route to host
I tried to google on this but all are pointing to some network/firewall problem.
Can anybody suggest me the correction ways to resolve this problem. Any idea how I can proceed further.
Thanks,
Jimmy

First of all, I dont know if you even done the proper fault elimination
No route to host is indicative of a network problem that could be based on several different faults.
Simplest way to check, log in to the system running your IdM.
first check if your nameservice is working
nslookup <your fully qualified hostname for the AD gateway>
idmmgr@unix103a:$ nslookup idm-gw.company.com
Server: 139.188.2.1
Address: 139.188.2.1#53
idm-gw.company.com canonical name = win050a.company.com.
Name: win050a.company.com
Address: 171.39.88.145if you get the right response there
try pinging the returned address
idmmgr@unix103a:$ ping 171.39.88.145
171.39.88.145 is aliveIf you have a routing problem it will probably show above...
if the route to the gateway works, it might be the gateway that cant talk to the AD
Just follow the track manually and if it stops working from one point, go past that point (if you can) and see if it works beyond it.
Either way, whatever resource is pointed out in the connectinfo in the pertinent adaptor or connector should work from the prompt of the system running it, if not, then you can start unraveling it from there.

Workflow configuration error - System Account connection test failed

Hi,
Has anybody faced a problem with Workflow configuration? The version we are using is 2.6.2 on Oracle database 9.2.0.5 on AIX5L. The workflow installation from 9.2.0.1 installation CDs goes through without any problem. But when the workflow configuration tool comes up it fails with the following error.
"SYSTEM account connection test failed".
The system and sys accounts are fine as verified by sqlplus. Any help is greatly appreciated.
The log file is shown below.
Workflow Configuration Assistant-AIX
WorkflowCA:
WorkflowCA: Workflow Configuration in progress...
WorkflowCA:
WorkflowCA: Screen width -2304-, screen height -1024-
WorkflowCA: Graphics User Interface mode
WorkflowCA:
WorkflowCA: Language - US
WorkflowCA:
WorkflowCA: Start testing connection, which takes less than 3 minutes.
WorkflowCA:
WorkflowCA: Account connection test for SYSTEM
WorkflowCA: SQL Thread: Thread[TstSQL,5,main]
WorkflowCA: chkSQL: true
WorkflowCA: cmdLine: /app/oracle/product/9.2.0/bin/sqlplus system/<Masked Password> @/app/oracle/product/9.2.0/wf/sql/wftstcon.sql
WorkflowCA: envVar[0]: -ORACLE_SID=rsdb-
WorkflowCA: envVar[1]: -ORACLE_HOME=/app/oracle/product/9.2.0-
WorkflowCA: envVar[2]: -WF_RESOURCES=/app/oracle/product/9.2.0/wf/res/wfus.res-
WorkflowCA: envVar[3]: -TZ=EST5EDT-
WorkflowCA: envVar[4]: -WF_NLS_LANG=AMERICAN_AMERICA.WE8ISO8859P1-
WorkflowCA: envVar[5]: -PATH=/app/oracle/product/9.2.0/bin:/app/oracle/product/9.2.0/lib:$PATH-
WorkflowCA: envVar[6]: -LD_LIBRARY_PATH=/app/oracle/product/9.2.0/lib-
WorkflowCA: envVar[7]: -WF_TNS_ADMIN=/app/oracle/product/9.2.0/network/admin-
WorkflowCA: envVar[8]: -WF_SHLIB_PATH=/app/oracle/product/9.2.0/lib-
WorkflowCA: Exit Val : 126
WorkflowCA: chkSQL is alive after 1 seconds: false
WorkflowCA: SYSTEM account connection test failed.
WorkflowCA: Terminating...
Thanks,
Chethan

We had this problem on 2 machines.
On the 1st machine, we tried the local install option after a few days (Local option with no connect string) and it worked with no problems!
On the 2nd machine, we could never get it to work even after opening a tar with Oracle. Finally we did a remote install from the 1st machine into the database on the 2nd machine. During the remote install while running wfinstall on the 1st machine, we just had to choose the remote option and the database service name for the connect string.
Thanks,
Chethan

Portal connection test for connector giving error.

Similar Messages

Maybe you are looking for