Portal Content Directory Invisible

Hi,
I could not find my Portal Content Directory in my Content Administration. What could be the problem? Kindly help me out.
Regards,
Kalai.

The problem is due to lack of role as by default the portal content directory will permit only super admin role so if you have created user with out this role then you have to either add your user or the new role to the permissions of the Portal Content Folder....
You can do this by logging into the user with super admin role and add your user/role to the portal content permissions...
Permissions can be added either from System administration or from Content Administration ...
System Administration --> Permissions --> Select Portal Content and add your role or user
Content Administration --> Dbl Clk Portal Content Directory --> in the display select box select Permissions and add your user / role ...
this might help as i faced the similar problem ....

Similar Messages

Unable to see the portal content directory in content adminstration

Hi,
I am unable to see the portal content directory in the content administration. I am not the super administrator.I have been assigned content admin role. But, I am unable to see the PCD.I see from previous blogs that permission has to be set for my role.
Can any one help me in telling the procedure to set the permission.If permission is not the issue then do tell me the solution for it.
Suganya

Hi Suganya,
The content admin role normally is sufficient to see / read the portal content catalogue (as far as the standard settings are concerned). But maybe they have been restricted on your implementation by some administrator.
Some with sufficient permissions on the portal content catalogue has to right-click on the root (portal_content) object, "open", "permissions", and has to provide at least administrative "read" permission to you, some role (content admin for example) which is assigned to you or some group you belong to.
Hope it helps
Detlev
PS: Please consider rewarding points for helpful answers on SDN. Thanks in advance!

Unable to see the portal content directory in content administration role

Hi,
I am unable to see the portal content directory in the content administration. I am not the super administrator, i have been assigned other roles. But, I am unable to see the PCD. Please help me how this can be sorted out.
Thanks much in advance,
Sunitha.S

Hi Sunita,
Contact your systen admin people , he/she will assign the Read/Write or Full controls to content_admin_role in the system administration -> Permissions -> select portal content folder and right click the select open Permissions , There he/she has to add content_admin_role in Assigned Permissions category and under Administrator category select Full Control and select End user check box and save the changes.
Then you can see the Portal Content and you can create /change the portal contents.
Thanks and Regards,
Hari

How to call Java WebDynpro iViews from Portal (Portal Content Directory)

Hello everybody,
I am trying to call a Java WebDynpro iView, which was created within the Enterprise Portal and is stored in the portal content directory (pcd).
I have created an HTML-iView in VC, where I have put in the pcd-link into the default-url field (pcd:portal_content/com.sap.pct/every_user/com.sap.pct.cprxrpm.ppmdc/com.sap.pct.cprxrpm.iviews/com.sap.pct.cprxrpm.iviews_cprojects/com.sap.pct.cprxrpm.cpr_projects). This iView is calling the cProjects WebDynpro Application. But after I run my model, the portal page is running and running, but nothing happens.
I did the same with transactional iView, which was also created in the Portal before. I have also created an HTML-iView in VC, where I have put in the pcd-link into the default-url field (pcd:portal_content/IBU_content/SAP_for_Service_Provider/com.sap.pct.issp.ps.professional_services/com.sap.pct.issp.prs.iviews/com.sap.pct.issp.prs.display_sd). This is working fine!
What I also tried is to call another VC-Model with an HTML-iView. Here I have put-in into the default-url field the pcd-location of my VC-model (pcd:portal_content/IBU_content/SAP_for_Service_Provider/com.sap.pct.issp.vcmodels/com.myComp.myProduct.1DM9.CreateEngagement/com.myComp.myProduct.iviews/com.myComp.myProduct.1G62.Cprojects_neu). This is also running fine!
Now I do not understand the difference between this three objects. There are all iViews within the portal but the WebDynpro iView is not callable through a HTML-iView in VC.
Could you help me in this case? Your help is very appreciated!
Thank you in advance.
Best regards,
Aylin.

Hi Marcel,
when you mean the preview within the portal, yes, it is working fine.
URL is not the way to solve my problem. I am working with IDES-Systems. This is our Demo System within SAP. I have to build my VC-Model in a Master IDES-System which will be transported than into the other IDES-Systems. The URL of the WD is not the same in the other systems. It is changing depending on the several Sysems. But the pcd-location is in all systems the same. Therefore I have to specify the pcd-location of the application.
Is there a restriction with WD within VC?
If we can do some kind of a netmeeting, I can show you my problem exactly.
Thank you.
Regards,
Aylin.

What is system admin- support - Support Desk - portal content directory .

what is System Admin -> Support -> Support Desk ->Portal content directory . why is this used for so that we can get any idea for which it is used, there are object and principal option which is like search criteria.

Hello Jaya,
You can find information about what portal content directory is in the following SAP documentation:
http://help.sap.com/saphelp_nw70ehp2/helpdata/en/45/a8029ecf140039e10000000a11466f/frameset.htm
I hope this helps you.
Regards,
Blanca

Remove Portal Content Directory From Personalization window

Hi,
I have requirement... we have a home page, which contain a set of iview and page. When logged in user personalize this page, he is able to see portal content directory and its folder structure provided he has end user permission.
Is there any option to avoid displaying folder struture. Or is there any option to hide portal content directory in personalization even user has end user permission.
Regards
Baby

Hi,
please check your permissions of the PCD. (Right click on folder -> open -> permissions)
End Users can only see PCD folders which have the "End User" flag enabled.
All permissions are inherited by successing folders. So don't set the End User flag in general.
Additionally check this discussion:
Best regards,
Olaf
Edited by: Olaf Böttcher on May 11, 2009 1:46 PM

Making Portal Content Visible/Invisible at Runtime

Hi SDNers,
I'm having a Portal Content Hierarchy which goes till 5 levels. The hierarchy includes roles, subroles, worksets, pages etc at different levels.
Now, the scenario is, not all the subroles should be visible to every user. I would like to make some WorkSets, Pages invisible for some user according to the specified role.
Means if a user doesnt have authorizations to do certain operations, those Pages, WorkSets should not be visible.
A Solution would be to prepare multiple Hierarchies according to the specified role. But those combinations are so many that I'm not feeling comfortable with the approach of making all the hierarchies statically.
I tried to find the solution with "Portal Content Permissions" but unfortunately couldnt come up with one.
Please let me know if anyone has any ideas for the same.
Thanks in advance,
Mausam

Hi,
Use PCDFilter, which can be used to filter role and workset content depending on the users.
Check this for more:
How to restrict the Users at Page level
Greetings,
Praveen Gudapati

Problem in loading the Portal Content Directory Structure & Detailed Naviga

Hi
we have installed EP6 SP16.When we are opening any tab detailed navigation is not loading.Some java sript errors are coming.Here iam pasting those errors.
Please suggest asolution.logged in as super admin
java script errors
access denied.
null or not an object.
object required.

Hi Gopi,
A. Pls check your browser settings.
We did face similar problems like Java script errors throwing msg's
" null or not an object.
object required"
Hope you are using IE. If so,
1. Go to Tools - > Internet Options - > Advanced .
Enable " http1.1 through Proxy Connections".
2. Increase the Cache.
B. Check whether the user has permissions to access the portal content
Go to Content Administration - > Portal Content.
Select Portal Content and right click. Select Permissions and check out.
Regards,
Venkat.
[Pls reward points if useful]
Message was edited by: venkat

Publish iviews in Portal Content Directory within BEX

Hi,
I'm having a problem wherein I'm not able to view the
PCD contents while i'm trying to publish an iview to the
portal thru BEX.In this case i'm not able to publish anything to portal.The Super administrator can view these with his ID.
we are using EP6.0 and BW3.5.I have tried giving the
same set of roles as that of administrator to myself even
then it doesnt seems to work.
Any help would be appreciated.
Thanks
Gk

Hi Arun,
I have exactly the same problem as Catherine has. I checked through SM30, and there's one entry in the table with the following values:
Destination: EPDBIP_PORTAL
Name of the system: BIPCLNT040
Default: checked
URL Prefix: http://emsso2.web.bc:52000
Prefix BW Metadata: /bip_metadata
KM Service URL: <<empty>>
However, I still get the bad index problem. Any more ideas (anyone) ?
Thanks
Frederik

Portal content Directory shows undefined

Hi,
    I installed EP 6.0 sp9.When I logged into portals it shows no content available in PCD.Can anyone give help me on this issue by suggesting any required patches or Shall I reinstall Netweaver again?

Hi Subarto,
           I had J2SE 1.4.2_05 installed and I see no mistake in that.Can u please elucidate on "reinstall the same" step wise so that I can redo the process.
            Thanking you in advance.
                                    Raja

ESS application systems creation in Portal content area

Hi ESS experts,
I had struck up in the systems creation part of the ESS implementation in EP7, ECC6.
I have the ESS set up guide by Siddhartha Jain which is just short of details on how to set up the systems for system alias SAP_Webdynpro_XSS, ITS, and back end R/3 system creation in the system and how to test the connections.
Can any one give a detail guide on how to set up the various systems in the Portal content directory to that the Ess application can be launched in the portal?
I had deployed the BP as described in the guide (and guided by the forum members) and all my Jco connections are Green in color. I need to complete the system creation and user creation in the portal and launch the ESS applicaiton in portal.
(Set up the first system on the Portal J2EE server in which the business package has been implemented and assign the system the alias SAP_WebDynpro_XSS.) Here is the step I need help!!!
Please help, and thanks in advance,
Regards

Hi Vinod,
Thanks for the immediate response.
Can you please guide me on the below statement?
>>>Then you need to specify the details of that system and various other properties
Assign the aliases and then test the connectivity. <<<
I do not know which are the system details and other properties that need to be defined to get the connection test passed. I am very new to portal and I need your advise and guidance.
Please help.
Thanks and regards

URL iView content translation not working using Portal Content Traslation

Hi All,
I am using Portal Content Translation to translate text of URL iView from English to Spanish. I am unable to do so. I have followed the below mentioned link:
http://help.sap.com/saphelp_nw04/helpdata/en/74/641640b7b6dd5fe10000000a155106/frameset.htm
I have used Content Admin -> Portal Content Translation -> Translation Worlist Coordination to:
1) Generate worklist and add content
2) Generte translation data
3) Release for translation
After this, I am using Content Admin -> Portal Content Translation -> Worklist Translation for following:
1) Load worklist for translation
2) Translate worklist
I am facing difficulty in Translate Worklist. The step by step method followed by me are as below:
I am clicking on Content Admin -> Portal Content Translation -> Worklist Translation.
I am searching Translation Worklist and selecting my Worklist
After this I am selecting following
Source Language - English
Target Language - Spanish
Then I am clicking on 'Load for Translation' button. New screen appears. In this screen, Translatable Text table is shown:
It shows following
Number
Source Text <EN>
Target Text <ES>
Status
Object ID
In Status I can see 'Not Translated'. I click on Next for three times as there are three line Number (0, 1 & 2)
The Status does not change. It remains 'Not Translated'.
When I am using following combination
Source Language - Raw Texts
Target Language - Raw Texts.
I click on Next for three times as there are three line Number (0, 1 & 2). The status changes to Translated.
I do not know what is going wrong with my process while selecting Source Language - English & Target Language - Spanish .
I have another question. I have to translate content of entire URL iView. How I can change the whole content of URL iView.
In the source text I can NOT see the contents of URL iView.
Thanks
Stuart

Hi Prakash,
Did you check whether the translation has been done completely in PCD inspector? Some times you would have translated using Portal translation but it will not be written in the locale of the iView property. Then we have to set it manually in the PCD inspector.
Follow the procedure.
1. navigate to System Administration -> Support -> Portal Content Directory -> PCD Inspector
This will open the PCD inspector.
2. "Browse Into" the iview where you have developed it.
3. Click on the "All Props" for the iView which you need to translate.
This will open the Properties in new window
4. Check the property "com.sap.portal.pcm.title" what is maintained in Chinese? if it still displaying in English text against Chinese, Then you need to Edit the property for chinese and have to give the actual chinese word.
Note : I hope you would have selected "Raw Text" for Source language and "Chinese" as Target language. Pls confirm on this.
Thanks,
Mahendran B.

Portal Content Translation - Unable to see the changed iView name, desc etc

Hi Experts,
I am using Portal Content Translation to translate the name of iViews, roles, iview description etc from English to Spanish. I have followed the method mentioned in the below mentioned link:
http://help.sap.com/saphelp_nw04/helpdata/en/74/641640b7b6dd5fe10000000a155106/frameset.htm
I have successfully executed all the processes mentioned in the document. It includes:
Creating Worklists and add content
Generate translation data
Release for translation
Search worklist and define source and target language
Load worklist for translation
Translate worklist
Make worklist as translated
Publish translation
I am able to publish the publish translation.
The above document says that "Publishing a translation means that the translated text strings are written back to the objects to which they belong (for example, the translated title of a role to the role object stored in the Portal Content Directory). "
In my case I have translated the name, description of an iView. After publishing am I supposed to see the name & description of iView in Spanish in the same iView (source iView).
I have not created any target iView. Am I supposed to create any target iView?
I am unable to see iView name, description in Spanish.
Can you please let me know what is going wrong?
Thanks
Stuart

Hi Stuart,
please set the user's language in UME. You can do this in the personalization dialog (see SAP Library section <a href="http://help.sap.com/saphelp_nw70/helpdata/en/f8/64e93b3a612d52e10000000a11402f/frameset.htm">Setting Portal Preferences</a>. Assign the portal role "eu_core_role" to your user if you do not see the "personalize" link in the portal masthead.
In what language does the iview name appear if you do not select Spanish language?
Please check if the name of the iView appears in Spanish language in PCD after you switched portal language to Spanish.
Best regards,
Martin

Disappearance of Portal Content folder on Client Systems

Hi All,
The Portal Content folder which is under Content administrattion, System Administartaion is not showned when i opened the Portal with Http://<ipaddress>:<50100>/irj on client machines.
It is showing simply loading process upto long time finally not showned.
But on the Server Machine, Portal Content folder is showing properly.
I tried with even Administartion log on also on the client systems, but am unabel to see the Portal content folder.
Can you tell the reason and solution what i have to do in order to make appear on the client systems?
Regds
phanikumar

Hi ,
Try to log into the user with super admin role and add your user/role to the portal content permissions.Permissions can be added either from System administration or from Content Administration .
System Administration --> Permissions --> Select Portal Content and add your role or user
Content Administration --> Dbl Clk Portal Content Directory --> in the display select box select Permissions and add your user / role ...
Hope this helps
Regards
Vineeth

Portal Content not visible

Hi All,
We are working on EP 7.0 SP9 using Internet Explorer 6.0 SP2 browser, but still the portal content directory in the portal is not visible. It shows javascript error in the status bar. The page gets loaded but with javascript errors.I am logging into portal with super admin role, but the same problem is coming. Even in Mozilla browser, the same error is displayed. I have even added the portal URL in trusted site.
Useful answer will be awarded suitably.
Regards,
Udit

Hi Leandro,
The javascript error that is coming is:
Line:165
Char:4
Error: Object required
Code:0
URL: http://<domain name>:<port no>/irj/portal/prtroot/com.sap.portal.appdesigner.framework.loading?loadingStr=Loading...&scroll=no&contentUrl=%2firj%2fservlet%2fprt%2fportal%2fprtroot%2fpcd!3aportal_content!2fadministrator!2fsuper_admin!2fsuper_admin_role!2fcom.sap.portal.content_administration!2fcom.sap.portal.content_admin_ws!2fcom.sap.portal.portal_content!2fcom.sap.portal.contentCatalogTreeContent
Plz guide me.

Portal Content Directory Invisible

Similar Messages

Maybe you are looking for