Portal DEV Environment Setups

I am still having problems setting up portal DEV/Debugging environment and fishing for some info on how everyone else had setup theirs.
I have followed Plumtree's guide for basic portal DEV setup, but having issues with it.
Does pretty much everyone had setup their environment that every elements needed are installed on their local machine? (ie., IIS, Tomcat (web app server), Plumtree portal 5.0.2 installed, VS .NET 2003 resident in their machine launching starter app as http://localhost/server.pt)???
Mine (due to resource difficulties) was setup as such, VS .NET 2003 and source codes are local, then installation of the portal 5.0.2 that is referenced by the project is in remote machine in the network, this remote machine has IIS installed, portal 5.0.2, Tomcat, .NET framework. All the eight .csproj files were copied to this remote machine also and referenced by the solution when launched within my .NET IDE.
Just fishing for some guidance from anyone who had their setups similar to mine. At the end of the steps I have taken, I am getting this error when debugging, "Error while trying to run project: Unable to start debugging on the web server. Unable to map the debug start page URL to a machine name. You may also want to refer to the ASP.NET and ATL Server debugging topic in the online documentation."
Any help, ideas or guidance greatly appreciated.

Ray,
Never having tried to set up a multiple machine development environment, I can't speak in favor or against your remote IDE setup. However, you mentioned that your starter app URL is http://localhost/server.pt. This is incorrect. It should read http://localhost/portal/server.pt.
I hope this helps.
-Frank

Similar Messages

CC&B Dev Environment Installation

Hi,
Since from one week I try to setup the Dev Environment Installation for CC&B(ORMB) , however facing below error while running the cmd
D:\spl\pulsev23\bin>splenviron.cmd -e pulsev23
The system cannot find the path specified.
Version ................ (SPLVERSION) : V2.2.0
Database Type ............... (SPLDB) : oracle
ORACLE_SID ............. (ORACLE_SID) : pulsev23
NLS_LANG ................. (NLS_LANG) : AMERICAN_AMERICA.UTF8
Environment Name ....... (SPLENVIRON) : pulsev23
Environment Code Directory (SPLEBASE) : D:\spl\pulsev23
App Output Dir - Logs ... (SPLOUTPUT) : D:\spl\sploutput\pulsev23
Build Directory .......... (SPLBUILD) : D:\spl\pulsev23\cobol\build
Runtime Directory .......... (SPLRUN) : D:\spl\pulsev23\runtime
Cobol Copy Path ......... (SPLCOBCPY) : D:\spl\pulsev23\cobol\source\cm;D:\spl\p
ulsev23\services;D:\spl\pulsev23\cobol\source
D:\spl\pulsev23>
I have no idea except to check the environment variable again and again. List of environment variable is given below :
set PERLDIR=D:\program\Perl\bin
SET PERL5LIB=D:\program\Perl\site\lib;D:\program\Perl\lib
SET PATH=D:\program\Perl\bin;%PATH%
SET JAVA_HOME=C:\Program Files\Java\jdk1.6.0_20
SET ORACLE_HOME=D:\oracle\product\11.1.0\client_1
set HIBERNATE_JAR_DIR=D:\setup\rmb\hibernate-3.2.7.ga
set C3P0_JAR_DIR=D:\setup\rmb\c3p0-0.9.1.2\lib
set COBDIR=D:\program\Microfocus5
set CATALINA_HOME=D:\program\Tomcat6
set PATH=D:\program\Microfocus5\Bin;%PATH%
echo off
echo "PERL DIR = " %PERLDIR%
echo "COBOL DIR = " %COBDIR%
echo "JAVA HOME = " %JAVA_HOME%
echo "ORACLE HOME = " %ORACLE_HOME%
echo "HIBERNATE JAR DIR = " %HIBERNATE_JAR_DIR%
echo "C3P0_JAR_DIR = " %C3P0_JAR_DIR%
echo "DBSERVER = " %DBSERVER%"@"%DBPORT%
echo "ORACLE_SID = " %ORACLE_SID%
echo "SPLENVIRON = " %SPLENVIRON%
set path=%path%;d:\spl\pulsev23
call cmd
::REM call splenviron -e pulsev23
::echo "Running splenv -e SPLENVIRON"
If anyone have some idea regarding the same please let us know.
Thanks in advance.
~Subodh

Hi,
The cause is, defined the path variable doesn't existing in the system(the error itself describing).
01. Check the path variables in the ENVIRON.INI file, whether those path's are existing in the system?
or
02. Take backup of splenviron.cmd file (the file is delivered from Oracle, so don't modify the backup copy)
03. Put the echo statement where ever it trying point file or dir.
04. You can get the wrong path which is specified.

Problem in opening the report as pop up in live environment but working fine with dev environment

Post Author: venkateshvarakala
CA Forum: Deployment
Hi,
I developed the report in Crystal Report 9.0 ,in dev environment when I opened the report it is opening in same window and when export to word it is opening in new window but after deploying the application, when I do the same i.e expoting to MS word it overwriting the crytal report due to which I am not allowing me save the Word Document into hard drive( which is one of the requirement.) (When I expot the pdf it opening in the same window but allows you to save to hard drive).
My question is why this behaving differently in dev and deployment stages... It will be helpful if the opening of the report happens just like dev environment in all the case.. i.e opening the exported report in new window.
Please help in resolving this issue and guide me if need to write or configure.
Thanks,
Venkatesh V

Your having the problem in this particular case only or it is a general problem, that you are not able to close the session properly.
If that is the case, try with IE6 because rest does not support this portal feature perfectly.
Regards
Chander Kararia

Dev Env Setup for Java Web Services

Where can I find some good documentation that clear shows how to setup CR Server XI2 and my Java dev environment so I can deploy and run the Java Web Services samples and do develoment of my own. I can only find bits and pieces about Java Web Services but so far cannot get anything to work.

The XI Release 2 Service Pack 2 Web Services Developer guide is found here:
http://devlibrary.businessobjects.com/BusinessObjectsXIR2SP2
/en/en/WS_SDK/wssdk_consumer/default.htm
Sincerely,
Ted Ueda

Java 2 runtime Environment setup failed with a return code of -1

Hi!
I have tried to install sdk 1_3_1_01 on Windows 2000 with ServicePack 2 and the error "Java 2 runtime Environment setup failed with a return code of -1" occured. As I saw, a lot of people has the problem but couldn't find a solution on this page!
Please help !
Me

I've installed 1.3.1_01 on both W2K Workstation and Server, no problem. There's a bug report, but no workaround or solution.
http://developer.java.sun.com/developer/bugParade/bugs/4412291.html
and it's supposedly 'fixed' in 1.4.0 beta.
http://java.sun.com/j2se/1.4/fixedbugs/fixedbugs-beta2.html
You might try installing the beta version
http://java.sun.com/j2se/

How old is test/dev environment?

Hi,
How can I check, How old is test/dev environment which was cloned from PROD in past.
by the creation time of control file?
Thanks

Just for the pourpose of sharing knowledge, even if your regular backup strategy does not include rman, you can still issue this command. I have created a just recently cloned database out of the seed, it works too.
[oracle@cursocfe log]$ rman target /
Recovery Manager: Release 10.2.0.1.0 - Production on Tue Apr 24 14:03:49 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
connected to target database: DEMO (DBID=3364817245)
RMAN> list incarnation of database;
using target database control file instead of recovery catalog
List of Database Incarnations
DB Key Inc Key DB Name DB ID STATUS Reset SCN Reset Time
1 1 DEMO 3364817245 PARENT 1 30-JUN-05
2 2 DEMO 3364817245 CURRENT 446075 24-APR-07

SharePoint 2013 Environment Setup with minimum resource

Hi,
Could you please advise considering below scenario
- What would be the minimum resources in order to setup SP2013 Enterprise environment?
- If we want to buy a single server from DELL as a host for all virtual machines as below, what would be the configuration for that server?
- How much RAM do we need for the host?
- How much ram / processor core allocation do we need for the VMs.
Requirments:
USER: 500 Users
Features : All OOB features / Services will be used in SharePoint 2013 Farm
Web Application : 3 Web Application, 10 Site Collection
Total Content : 100 GB
Virtual Box for entire SP2013 Environment Setup:
- SQL Server 2012 Sp1 Enterprise
- SQL Clustering / Mirroring
- SP 2013 Application Server1 (Enterprise)
- SP Application Server2
- SP Application Server3
- SP Application Server4
- SP WFE 1
- SP WFE 2
- BI Server 1
- BI Server 2
- OWA Server 1
- OWA Server 2
- Workflow Manager 1
- Workflow Manager 2
- TMG Firewall 2010
- Exchange Server 2010
- Microsoft Lync Server 2010
Thanks
srabon

It's all here:
http://technet.microsoft.com/en-us/library/cc262485%28v=office.15%29.aspx
Putting that many servers together for a 500 seat company is madness. Go for the text book small farm deployment at most, in reality you'd probably be better off just having three servers total (1 WFE, 1 App, 1 SQL).
I can't remember how much you should reserve for the hypervisor but if you allocate 1GB for that i think you're ok.
For a three server deployment you'd probably be ok with 32GB, 8GB for the WFE and App server, 7GB for SQL and one for the hypervisor. 64GB would give you a lot more comfort.
If you want more options like the enhanced workflows and OWA you'd need servers for each of those as well.
You can always overprovision CPUs on the hypervisor but more than 12 Cores would be wasted on a 3 server deployment for 500 users.

Getting started - setting up a dev environement

Hi,
I'm just getting started with Photoshop scripting. I've been using ExtendScript Toolkit and Adobe Configurator 4 to build a custom panel.
However I don't know how to get my script to interface with the panel I've created with the configurator? Is the panel availble in the DOM tree somewhere (using Javascript)? Is there an class to create the extension panel outside of Adobe Configurator? I can't seem to find it within Script UI documentation.
Finally can anyone recommend a better dev enviornment setup? Using the ExtendScript Tookit seems a bit cumbersome. Can I download the SDK and use it with IntelliJ for example?
Many thanks!

Jeff, good to see you here.
I thought as developers we were being encouraged to move from Flash and AIR to HTML5. It is my understanding that SWF and AIR panels will not be supported at some point in the near future.
http://forums.adobe.com/message/5692258#5692258
In a post on this forum Tom Ruark made a recent post were I understood that even ScriptUI was going to be replaced with HTML5.
Am I mistaken? Are the supporters of HTML5 just being overly zealous trying to get more supporters?

How to move the code and deploy the code from Dev environment to SIT.

Hi,
I have a requirement.
I want to move the components and deploy the code from dev Environment to SIT environment using Ant Script for AIA.
Before doing this is any pre-requisites required?
Can you please help on this,how to do?
Thanks in advance.

Further to add to Anish Statement follow the steps to easily migrate the code to different environment.
Steps:
First log on to the EM Console and export the Composite Flow as a SAR file to a location.
In Jdeveloper create a project using the same name of a SAR file like - ProcessSalesorderFlow
import the project using the option import the composite using a SAR File.
After import , then click on the composite and then generate the config plan.
In config plan add all the url changes using the search and replace Tags.
And in case if you have a JCA Adapters the same has to be taken care in SIT environment why because during deployment a lookup happens and deployment fails if it dont find the JNDI Name.
Take the SAR file adn config plan seperately from JDeveloper.
Now open em console again and then deploy it using the config file and SAR file.
Thanks,
Venugopal SSS RAJA

How to simulate the defect in dev environment

I have a qa database and the issue i got is some unwanted data getting inserted into the table.this is given as a defect. The qa environment cannot be used for testing because it can only be queried (select) but no insert , update. And the objects cannot be inserted into the qa database.
So this set up has to be replicated in development env . In which i can do anything. My question is how to replicate the defect in dev . For example the tester says that a record got inserted. But this data is not in development. How to do a data set up in dev.
thanks,
Vinodh

Hi,
Get an export dump of the qa db schema and import it on to your dev environment and see how you can manipulate the data. However it would be good to talk to the testers how they were able to enter the invalid/junk data.
cheers
VT

Configure Apps for SharePoint 2013 in dev environment without DNS

I have a SP 2013 dev env
http://spitlab/ .I want to configure app store in this environment
will I be able to do it without access to a DNS server
I followed the below two articles
http://www.ashokraja.me/post/Develop-SharePoint-2013-Napa-App-In-Local-Dev-Environment-Configuring-On-Premises-without-DNS.aspx
I am able to install third party apps but when I click on it . it gets redirected to sfs.in
next i try this
http://sharepointconnoisseur.blogspot.com/2013/07/shortcut-to-prepare-sharepoint-2013-app.html
same thing I am able to install 3rd party apps but when i click on it .. it goes to intranet.com
so is it possible to install third party apps on a dev box without DNS and check out third party apps and if what steps am i missing ?

Hi,
If you click the 3rd party apps and it is redirected to sfs.in or intranet.com, this means you configured app domain correctly.
You can read the official document per the following first link to understand what app domain is (with DNS configured), app domain format is as bellow image (borrowed from this
article), and app domain is defined as you want(e.g. ContosoApps.com).
Without DNS, as your above two articles described, the app domain (e.g. apps.com, or apps.sfs.in) is written manually in hosts file directly, you can construct an app domain as your own, then after you install a custom developed app, it should be the following
app url format.
http://technet.microsoft.com/en-us/library/fp161236(v=office.15).aspx
http://www.ashokraja.me/post/Develop-SharePoint-2013-Napa-App-In-Local-Dev-Environment-Configuring-On-Premises-without-DNS.aspx
http://sharepointconnoisseur.blogspot.jp/2013/07/shortcut-to-prepare-sharepoint-2013-app.html
Thanks
Daniel Yang
TechNet Community Support

Clustering in dev environment

Hi,
          Is there anyway in development environment to test clustering without
          getting the network people involved to do multicasting?
          Thanks.
          Tinou Bao
          www.tinou.com


Try and see if the multicast test across a couple of different computers
          will work with either 237.0.0.1 or 224.0.0.1. If you are successful with
          either of these two addresses as the multicast, you should be able to test
          clustering within your dev. environment.
          Patrick
          "Tinou Bao" <[email protected]> wrote in message
          news:[email protected]..
          > Hi,
          >
          > Is there anyway in development environment to test clustering without
          > getting the network people involved to do multicasting?
          >
          > Thanks.
          >
          > --
          > Tinou Bao
          > www.tinou.com
          >
          >

SharePoint 2013 dev environment as standalone with DC - PowerShell in Azure?

Hi,
I am looking for a PowerShell script that create based on a Visual Studio 2013 Azure image a dev environment in azure. I need a Standalone server with DC / SQL / SharePoint 2013 on one server.
Provide Microsoft a script for this requirement?
Regards,

First off, Microsoft does not support SharePoint 2013 on a Domain Controller. Here are some scripting resources, however:
http://msdn.microsoft.com/en-us/library/windowsazure/dn385843.aspx
https://github.com/WindowsAzure/azure-sdk-tools-samples/wiki/Automated-Deployment-of-SharePoint-2013-with-Windows-Azure-PowerShell
http://blogs.msdn.com/b/windowsazure/archive/2013/05/24/automating-sharepoint-deployments-in-windows-azure-using-powershell.aspx
http://blog.appliedis.com/2013/04/29/automating-sharepoint-2013-installation-on-windows-azure-iaas/
http://absolute-sharepoint.com/2013/10/create-a-scripted-sharepoint-2013-development-environment-tutorial-part-1.html
Trevor Seward, MCC
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

How to ctreate report in dev environment

Hi all,
Can I create report on the dev evironment only by having VPN acessto that machine .
If yes then when I logged in to the financial reporting stdio client of the Dev environment m/c it gave me the following error.
You are not authorized to use this functionality.Contact your administrator.
I have used the administrator user.And the user had the required permission to create the report.
Thanks

Hi,
No you won't be able to open it in that way, you can usually tell if it is exactly the same by looking at the file size, if they are exactly the same as each other then it is more than likely you will have the same version.
You could open the hreports.jar with something like winrar and look in the META-INF directory, there is a file called MANIFEST.MF, if you view that file you will see a line like Implementation-Version: 11.1.1.2.0.0230
You could also click on HReports.exe in windows explorer and you will see the version in the task bar.
If the client worked you can also log in and go to Help > About Reporting Studio which will tell you the version.
That should give you a few different options to find out the exact version between client and server.
Cheers
John
http://john-goodwin.blogspot.com/

Transporting roles from sandbox to a DEV environment

Hi all,
We have some external consultants who have been developing/modifying roles in a sandbox. They have put in a lot of work into this effort and do no want to re-create these roles in the DEV environment. Does SAP best practice allow us to transport these roles from the SANDBOX to the DEV ? or do we insist that the roles be re-created in the DEV box ? Will there be maintenance issues down the road if we do the tranport ?
Thanks,
Denis Louis

Yes, you can download them to your desktop and upload them to the DEV...
PFCG -> Role -> Download and Upload
Regards
Juan

Portal DEV Environment Setups

Similar Messages

Maybe you are looking for