Portal does

potral does it need any application on system to run it

Hi,
your question is very short... I will try to answer.
The portal is integrated in SAP NetWeaver. The portal is installed on an instance of the J2EE Engine of the SAP Web Application Server. SAP Enterprise Portal contains the NetWeaver components Portal, Knowledge Management and Collaboration. In addition, SAP provides pre-defined content called business packages.
Check the portal area on sdn you will find all information:
https://www.sdn.sap.com/irj/sdn/nw-portalandcollaboration
Additional:
[SAP Netweaver Portal FAQ|https://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/c090d23b-265a-2a10-b3b4-ecad7c231d26&overridelayout=true]
[Overview about IT Scenario Running an Enterprise Portal|https://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/7037ca58-1848-2a10-419b-887bc7251892&overridelayout=true]
Regards
Andreas

Similar Messages

Common Services portal does not appear on the LMS 3.0 homepage

Hi,
I am encountering a problem on Ciscoworks LMS 3.0 wherein the Common Services portal does not appear on the homepage. This was after I tried to upgrade CW to LMS 3.2 but does not seem to work so I revert back to LMS 3.0. I even did a restore of the backup database but still no Common Services on the homepage.
How do i resolve this?
Appreaciate your help. Thanks in advance!

If you're not seeing the Common Services application portlet on the Functional Portal View, then you need to open a TAC service request to get the steps to manually re-register all of the installed applications from the command line.

IMPORT Target Portal does not match the Source Portal version

Hi,
Executing the import via the command line gives me the following error: Error: Target Portal does not match the Source Portal version
Cannot proceed with Import
Checking the output of the script tells me that the portal source has version 9.0.2.6 and the target 9.0.4.0.
Does this mean that there is no backwards compatibilty?
How should I continue from here?
Best Regards

Portal Export/Import utilities are designed only to work between Portals which are at the same version level.
For more information, please see this section in the Portal Export/Import FAQ for 9.0.2.6:
http://portalstudio.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/OTN_CONTENT/MAINPAGE/DEPLOY_PERFORM/9023_EXPORT_IMPORT_FAQ_0308.HTM#question_5
OracleAS Portal allows you to upgrade your existing content to the latest release of Portal.
What you need to do in your particular case is to upgrade your existing portal installation from 9.0.2.6 to 9.0.4 before using Portal Export/Import between your two portal instances.
Best Regards,
Harry

Discoverer Report opened from Portal does not show correct data

Hi,
When I try to open a Discoverer report from a portal that I created, it shows stale data but when I click on "Analyze", it shows all the data correctly.
Does anyone know what the reason could be for this?
Thank you,
Santoshi

I assume you used the Discoverer Portlet Provider. A discoverer portlet is never live data. When you define the portlet you specify how often to 'refresh' the data. If you skipped this step, then you just get the data as-of when you created the portlet.
Generally you specify the refresh time to be sometime after your usual database load completes.

Learning portal does not check Prerequisite qualifications while booking

Hi,
We recently upgraded to EP4 and saw an issue on the learning portal.
When there are pre-requisite qulaifications attached to a course type, learning portal should check if the Learner has the prerequisite qulaification in his/her qualification profile and indicate if booking could be done or not.
We notice that learning portal is bypassing the check and shows the message ' The results of the prerequisites check indicate that you can book this course.' and does the booking successfully.
Please help.
Jaya

Hi Jaya
Function module LSO_TRAININGTYPE_GET_DETAIL_C
This function module is responsible for performing the prerequisite checks and determining whether the booking is possible or not by setting the flag NO_BOOKING_POSSIBLE. You can find that after executing the above function module for the learner that whether the value is space for flag NO_BOOKING_POSSIBLE.
This way you can findout the reason for the behaviour.
Best Regards
Chetan

CWA using customized portal does not work IPAD 2

Hi all,
I have another interesting case that I have been testing for more than a month but it is not working. Cisco provides templates to create the customized portals for LWA or CWA. However, Success Page HTML does not work on LWA and Cisco ISE uses internal default success page.
On my specific case, we need to move from LWA to CWA in order to minimize the number of redirections and the customized portal for login and AUP work fine BUT when the SUCCESS PAGE is presented on the IPAD, the button on the top right corner never changes from CANCEL to DONE even though the Authentication is successful. We modified multiple times the HTML Files following Cisco Templates and the following link (which looks like has an error) with the same incorrect behavior. Only works if I click the go back arrow on the IPAD so I move back to the AUP page (not an acceptable workaround).
Reference Link:
http://www.cisco.com/c/dam/en/us/td/docs/security/ise/how_to/HowTo-42-Customize_ISE12_Web_Portals.pdf
In the link, Cisco mentions version 1.2.0.899 patch 8 as the version to be used on the ISE devices running the customized templates. However, we recently moved from 1.1.3.124 to 1.2.1.198 patch 3. I created a brand new VM running 1.2.1.198 patch 3, imported the cisco templates for login, AUP, success and error and I am still getting the same problem on IPAD 2 for SUCCESS PAGE even though I am using Cisco Templates.
I could give a try configuring another VM running 1.2.0.899 patch 8 and use the Cisco templates + IPAD 2 but that is not a good solution.
Have anyone experienced the same problem?
thanks

I opened a case with Cisco TAC, let's see what happens. In the meantime, I created a VM ISE which will be running 1.2.0.899 patch 8 so I will upload the Cisco HTML Files on it and see it this option works properly on IPAD 2, IPAD 4, Chromebook, Win 7 and Samsung Tablets.

Configure page in Azure portal does not load

Hi,
Whenever I try to load the "Configure" tab/view of my Mobile Service the page never stops loading. I can see some information in the background but I cannot change anything since it never stops loading. I have waited a couple of weeks if this was
something temporary but it seems permanent. I do not want to recreate my mobile service and my plan (MSDN sub) does not include the regular support within the portal.
Here is a pic, describing the problem: http://tinypic.com/r/2dqvqc1/8
Any ideas?

It's possible that your mobile services has gotten into a bad state. Does the same thing happen if you create a new mobile service and use the Configure tab? Also, can you access other tabs for your service?
Either way, please email us your subscription ID and mobile service name to [email protected], and we'll investigate.

Portal does not start after RI installation

Hi,
we installed the EP 6 with the RI. The installation went through all steps without problems.
At the end, when the portal should come up, the server does not start. The only message I receive in the trace log is:
arguments   :
    arg[00] : C:\usr\sap\J2E\JC00/j2ee/os_libs/jlaunch.exe
    arg[01] : pf=C:\usr\sap\J2E\SYS\profile\J2E_JC00_svrsapep6
    arg[02] : -DSAPINFO=J2E_00_server
    arg[03] : pf=C:\usr\sap\J2E\SYS\profile\J2E_JC00_svrsapep6
[Thr 2892] Mon Apr 25 13:41:29 2005
[Thr 2892] *** ERROR => Invalid property value [box.number/J2EJC00svrsapep6] [jstartxx.c   808]
[Thr 2892] *** ERROR => Invalid property value [system.id/0] [jstartxx.c   808]
What may be the reason for this and how can we fix this in a way that the server will startup properly?
Thanks in advance

Hi,
the error message didn't mean anything. The only problem was that the JVM had a to high memory setting. We were running the portal in a VMWare with just 1.5 GB RAM. When we changed the amount of the heap memory size in the configtool, the portal came up.

Gallery of tenant portal does not appear when you left for 2 days

hi all.
The Update Rollup 3 of SCVMM and AzuerPack I have installed.
When the all tenant portal and admin portal to stand for 2 days,
VM template does not appear anymore in the gallery of the tenant portal.
Select the plan in the admin portal, you can open the configuration screen of the cloud of virtual machine. It remains the template has been added in this screen.
After this, you will see the gallery items tenant portal.
Is there a fix is being planned?

Thank you for
Mig-ch
> UR4 of SCVMM fixes this problem.
You see how
by applying the UR4.

Portal does not start up

hi,
I am are running sap enterprise portal. I used the Visual Admin to stop some applications (VA -> server -> services -> deploy -> Applications). I also stopped the application IRJ (which is the portal application), which was a big error from me because
unfortunately the j2ee enigne does not start up any more. Does anyone know a possibility to activate the irj application (in offline mode) again? The VA only works with a running j2ee engine.
Regards
Michael

Hi Michael,
Im not sure about what exactly you changed, but have you try to change it back using Configtool? (Offline editor)
Also check the error in the logs std_server0.out and std_dispatcher.out
Hope this help!
Juan
Please reward with points if helpful

Portal stability - "what is the portal doing?"

We have a portal running with the latest JDK (Linux X86_64, IBM JDK SR9), recommended parameters set and still facing lots of stability problems. The portal has three server processes, what we see actually is, that two of them consume each 100 % CPU. Actually no one is logged into the portal. I can see "strange" messages in the default trace such as
predecessor system -
com.sap.engine.services.applocking.exception.AppLockingTechnicalLockException: The lifetime can not be th
e user-session, because currently no user is logged in. Creating locks for the system-user is not allowed
        at com.sap.engine.services.applocking.AbstractBaseLocking.getObjectForLifetime(AbstractBaseLockin
g.java:483)
        at com.sap.engine.services.applocking.LogicalLockingImpl.getCurrentLifetimeDescription(LogicalLoc
kingImpl.java:193)
        at com.sap.engine.services.applocking.AbstractBaseLocking.lockInternal(AbstractBaseLocking.java:1
28)
        at com.sap.engine.services.applocking.LogicalLockingImpl.lock(LogicalLockingImpl.java:43)
        at com.sap.engine.services.applocking.NamespaceLogicalLockingImpl.lock(NamespaceLogicalLockingImp
l.java:47)
        at com.sap.engine.services.applocking.LogicalLocking_Stub.lock(LogicalLocking_Stub.java:65)
        at com.sapportals.wcm.service.taskqueue.TaskQueue$Lock.lock(TaskQueue.java:316)
        at com.sapportals.wcm.service.taskqueue.TaskQueue$Lock.writeLock(TaskQueue.java:293)
        at com.sapportals.wcm.service.taskqueue.TaskQueue.writeLock(TaskQueue.java:467)
        at com.sapportals.wcm.service.taskqueue.TaskQueue.get(TaskQueue.java:122)
        at com.sapportals.wcm.service.taskqueue.TaskQueueReader.get(TaskQueueReader.java:68)
        at com.sapportals.wcm.service.taskqueue.TaskQueueReader.get(TaskQueueReader.java:58)
        at com.sapportals.wcm.service.jobprocessor.LocalDispatcher.stopJobs(LocalDispatcher.java:161)
        at com.sapportals.wcm.service.jobprocessor.LocalDispatcher.run(LocalDispatcher.java:101)
        at java.lang.Thread.run(Thread.java:838)
the two server processes are "looping" somewhere, the filesystem gets trashed with those logfiles, 4 or 5 of default.trc.X each minute.
Restarting the portal is NOT an option since that problem will arise sooner or later again.
What can we as a CUSTOMER do aside from creating thread dumps and attach them to an OSS call and "wait"? How to find out, what the system is doing?
Markus

David, I really do appreciate your help - thank your for your time.
It´s 4 am here in Germany and I just got a reply from another J2EE-ESS-Portal Prio-1 call, that´s why I´m awake...
Meanwhile I have found out a possible "reason" for this. A collegue responsible for the "BI Portal" (we have meanwhile about 18 or 19 J2EE instances due to the fact, that you can´t install everything on one due to interdependencies - all-in-all a big mess) did today some configuration in federated portal infrastructure (I wasn´t aware of that) and apparently a configuration change invalidates the/a/some (of those dozend) buffers/caches on both portals and implictly triggers a GC. Since the parameter "-Xdisableexplicitgc" was not set, it may be ran around in circles.
I finally deleted the the logfiles today due to other problems we had because SAP is still unable to provide a usefull logging mechanism by default and your logfiles are getting trashed with 99,9 % garbage making finding other non-fatal errors almost impossible without stopping the engine, deleting all *.trc and *.log, starting again and trying to reproduce the error - on the production system, including massive user interruption (who´s logged on? one doesn´t know).
I am really thankful for your offer to help but I´m at the point, where I just open OSS calls, (including ABAP) 16 are running, 2 prio-1, several prio-2 - just plain frustration and no more motivation to do one step more than necessary.
I got today a note from a supporter about "JMS" - what the heck is that and why do I need to know anything about that? I´m at the point: "Either educate me and give me the possibility to do so without the necessity of becoming a Java developer - or leave me alone with that boring detail and fix the error."
You are absolutely correct, one need to work "together" but doing so by opening OSS calls and talking to seven different people in one call and giving me notes that are greek or other notes with "click here and click there" is not "working together", it´s just a very typical example of distributed development, where distributed is so distributed, that the right hand doesn´t know what the left hand does - limitation of damage.
Build once - debug everywhere.
sigh
Markus

Portal does't support IE8?

Dear Team,
We are useing EP 7.01 and SP05. But still some applications in portal are not working. Does it required extra setting or we need to upgrade the configuration?
with out changeing any compatibility mode in ie8 is there any option to run the applications in portal?
Regards
Daniel

Hi Daniel,
What's your OS? If you have Windows7 then you'll need SPS6. Please refer to the PAM on the SAP Support Portal for more details.
Hope it helps.
Regards,
Dao

FIori Application on Portal, does we need gateway server?

Hi All
My company starting SAP FIORI implementation.
Upgradation of gateway server on 740 going on.
Also
same time upgrading Portal from 7.0 to 740.
Also
i heard about FLP on EP.
So
My question
1) it is possible to implement SAP FIORi apps on portal? (might be yes)
So
2) Does we need gateway server for this?
How it will work..
Tags edited by: Michael Appleby

i gone through
How to integrate SAP Fiori apps into your Mobile Portal
seems need gateway server.
but quite confusing...
if SAP provide ESS MSS (sca) packages for Portal.
Why not sca file for SAP FIORI apps. so not need gateway server.
might be for security resion.

Scheduling the report from Infoview portal does not show up data

"The crystal report is based on a SAP BI query. The parameters of the report are basically the parameters(SAP variables) of the SAP BI query. When we run the crystal report in the CR Report Designer tool, it runs fine showing all the data correctly. Then we published the crystal report to the Crystal Enterprise Server from the SAP BI system. Through the Infoview portal, the user clicks on the 'Schedule' link for the report and sets the parameters. When the 'Schedule' button is clicked, it runs successfully but no data is seen in the report except for the template. But under the same report, in Infoview portal, if the user selects "View" link, sets the parameters and then clicks the 'Execute' button, it runs successfully showing all correct data.
Dont understand why it works for 'View' link but doesn't work for 'Schedule' link. Is there any setting that needs to be made for this?"
Thanks in advance,
Sri

Hi Sri,
When we are able to see the report and unable to schedule the report with in the Info view, then check with the user rights.
Just try to login with admin account and try to schedule the report.
Also check the report in CMC and see the preview of the report.
If the user doesn't have enough rights to schedule the report, then it doesn't allow it.
Also check with in the Folder rights with in the report is saved.
Regards,
Naveen.

Progress bar in the portal does not appear all the time when loading

Hello All,
I have a dashboard in EP, when I click on it the majority of the time a progress bar appears when it is loading. Some time it does not, the page just appears to be doing nothing, then the dashboard will appear.
Any one else seen this issue?
Thanks

Hai check whether your using the latest EP patch levels that may solve your issue.
GoodDay.

Portal does

Similar Messages

Maybe you are looking for