Portal Drive and Cluster

Hi all,
We received recommendation to start using portal drive instead of web browser in
order to access KM folders via WebDAV.
I have installed and configured Portal drive as described in SAP help.
Since we have a cluster installation, the server URL is the dispatcher URL.
When providing the dispatcher URL, portal drive fails to connect.
When providing one of the cluster servers url, connection is successful.
Does anyone know if it is possible to work with Portal Drive in a cluster installation
and if so, what configuration should be made in order for this to work?
Thanks,
Moti.

Well, this is supposed to work. If it doesn't, I would recommend to open a support message so the problem gets investigated.
Best regards, Julian

Similar Messages

Portal Drive and MS Outlook Integration

Hi,
I have installed the SAP Portal Drive Client on my PC.
It works pretty well. I have observed something that I have not been able to find information on in any documentation.
When I start MS Outlook now (thick client) there is an additional option under the Tools menu in Outlook titled "Portal Drive Intellittach" which is greyed out (inactive).
It appears as though some integration between SAP's Portal Drive and MS Outlook may be possible - does anyone have any information on this please?
Cheers, Phil G.
Message was edited by: Phil Gleadhill
Update May 29th. I received the following information from SAP Germany Product Management for those interested...
Ad 1. As Portal Drive basically is an enhanced WebDAV client and the official WebDAV protocol (www.webdav.org) doesn't support the exchange of metadata schema information there's currently no way for the client to detect that some properties are mandatory or even enforce the entry. That's why our member of the WebDAV working group already posted an RFC for the WebDAV protocol addressing this issue.
Ad 2. The deactivated "Portal Drive Intellitach" command just hasn't been removed from the Outlook UI yet. It's meant to support the exchange of document links instead of document attachments. As this functionality is directly supported by KM, specific FlexUI commands and the context menu of Portal Drive ("Copy URL to clipboard") it's obsolete now.
We also plan to enhance some features and add new functionality, but I can't give you any details right now as final decisions haven't been made. I hope this clarified some things concerning Portal Drive.
Cheers, Phil G.

Hi,
For this you required transaction code scot , where you need to maintain IP address of outlook server.
then mail to vendor automatically triggred also you need to open some port for the same of server.

Backing up KM Folders via Portal Drive

Hi Experts,
We've implemented Netweaver Portal 7.0 with SP14 for a local company. Company migrated all shared folders from filesystem into KM via Portal Drive.
Portal is running on a VMWARE machine with Linux OS.
Followings are common questions, when we implement a Document Management SYstem on KM. I'm writing my answers but need help in Q2 esp.
Q1: How to backup files in KM?
A1: KM repostory is default DBFS mode ad all files within KM are stored in DB. So backing up DB means backing up KM thus all files.
Q2: How to backup/restore single/multiple files in KM in case of accidental deletion?
A2: In case of accidental deletion, with SP14 "Deleted Items" functionality given to KM and you can view and restore files deleted.
In case of permanent deletion, there is no option for KM file backup/restore other than DB.
Here we tried to simulate something following to backup files and restore in case of problem just like FileSystem document management:
On Backup Server, we installed Portal Drive and mapped the Portal KM Folders.
Then created a FileSystem backup on this mounted FS. But unable to backup in specific cases.
Not sure what is causing the problem, may be backup software, may be VMWARE architecture or may be linux or SAP portal for the last.
Here is the error code we get when we tried to backup KM Folders on a 32-bit windows 2003 server with Netbackup.
6/4/2008 2:14:53 PM - granted resource MediaID=@aaaae;Path=Z:\bck;MediaServer=bkcompany
6/4/2008 2:14:53 PM - granted resource test_disk
6/4/2008 2:14:53 PM - estimated 16 kbytes needed
6/4/2008 2:14:54 PM - started process bpbrm (88520)
6/4/2008 2:14:54 PM - connecting
6/4/2008 2:14:54 PM - connected; connect time: 00:00:00
6/4/2008 2:14:58 PM - begin writing
6/4/2008 2:15:05 PM - Error bpbrm(pid=88520) socket read failed, An existing connection was forcibly closed by the remote host. (10054)
6/4/2008 2:15:10 PM - Error bpbrm(pid=88520) could not send server status message
6/4/2008 2:15:10 PM - end writing; write time: 00:00:12
file read failed(13)
also the event log entry:
Faulting application bpbkar32.exe, version 6.5.2007.1115, faulting module bpbkar32.exe, version 6.5.2007.1115, fault address 0x00067581.
May be this specific case is encountered by any of you
Does anyone have any solution or sample implementation like above.

Hi
Have you tried ICE Offline scenario?
[How to distribute KM Content using ICE Protocol|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/802c1739-d270-2910-ad9f-f369de07c1bf]
Check the Offline scenario, not Online.
Regards
Aparnna

Portal Drive Single Sign On and Kerberos Authentication

Hi,
We are using NW2004s SP10 Portal and we have successfully configured Kerberos authentication with Windows Active Directory 2003. To access the KM Content in windows explorer format, we are using Portal Drive but Portal Drive still asks for authentication i.e. SSO is not working for Portal Drive. I have understood from the forums and sap help site that SSO from portal drive will work only for NTLM authentication and client certificates. Can you please help regarding below questions.
1. Can Kerberos and NTLM authentication be configured together.
2. If yes, what are the steps to configure NTLM authentication for NW2004s SAP Portal and Active Directory 2003.
3. Any other approach to make Portal Drive SSO work.
Helpful answers will be rewarded.
Regards,
Chandra

Hi Gregor,
I did two things:
first i made a change in the portalapp.xml in the PAR file "com.sap.km.cm.par". In the section authentication scheme for "docs" I changed the authentication scheme to "default" to make sure that documents are opened using the default authentication scheme (SPNego) instead of basic authentication
second, I used the SPNego wizard to configure SPNego. So I didn't adjust anything in the Visual Admin or the authentication template apart from adding the Template to the Ticket policy configuration.
Again, this only worked after installing the latest vesion.
Hope this helps
Marcel

Portal Drive Error--re-install SAP NW Portal Drive software and try again

Dear Experts,
Could you please let me know if there is any permanent fix for
Portal Drive inconsistence behaviour.
1.We use NW2004s SPS 13.
2.After the installation of Portal Drive (version 4.5.6796 ) on an
desktop, windows is not stable and must be restart (cold start).
3. After the restart the problems still exists and only a
deinstallation resolves the problem.
4. Sometimes the problem occurs on connecting to a service,
sometimes on disconnecting.
Sometimes on starting windows, but before the load of Protal
Drive.
5."Presently we are getting error SAP NetWeaver Portal Drive is not installed or configured correctly.Please re-install SAP
NetWeaver Portal Drive software and try again"
6. If we uninstall it and reinstall, it is working fine.
I wanted to know if there is any permanent fix for this inconsistance in Portal drive.
Because i have received complaints from more than 9 users in this week.
Really thanks for helping me
Vishali.B

Hey just a update, so even though apple said the HDD was fine because of the S.M.A.R.T status and it was been picked it would be fine I did not agree, took my iMac apart went out to the local computer shop picked up a cheap 1tb WD HDD and now the iMac is worked fine and smooth :-)
So now I know that was the issue I can order a nice new SSD for the iMac and use the new HDD I got in an external case :-) just incase anyone had the same issue that's the fix. Buy a new HDD or SSD

Portal Drive not working with external load balancer

Hi,
We have a portal cluster and we are using external Load balancer from
Juniper for load balancing the portal cluster. When given the direct
portal URL (Central instance URL or Dialog instance URL), Portal Drive
is able to connect to portal and shows the KM documents properly. But
when given the Load balancer URL, it gives error saying "Can
not connect to host using WebDAV protocol". Load balancer URL works
fine from the browser without any problems. Any help is highly appreciated.
Helpful points will be rewarded.
Regards,
Chandra

Hi Steve,
For Portal Drive, Windows integrated authentication, client certificates,basic authentication and Kerberos is supported.
(in the default delivery of com.sap.km.cm.docs iview the authentication Scheme is set to basicauthentication - switching that to form based authenticationis not being supportedbywebdav clients).
ALso now Integrated Windows Authentication (NTLM) has been made available with latest patch.
Also read through SAP NOTE 1084683 for further clarifications.
Regards,
Shailesh

Creating Portal Drive ?

Dear All,
I want to create portal drive for my portal, So can anyone guide me in this scenario.
Also please let me know, after creating the portal drive up to what extent I can put mass data into that (size).
I want to execute that data on portal itself, is it posible on portal to run .exe file?(I dont want to only fetch that data)
Useful point will be rewarded.
Regards,
Aditya

Hi All,
As per the guideline doc I have installed portal drive software and from that created a service using webdav url of the folder where I want to upload mass data.
It is also allowing me to upload the same.
After uploading when I am accessing that folder from EP, it is showing all the folders and its subfolders, but when I am accessing one .htm file from another from EP, it is giving me error as,
404
The requested resource is not available.
stack trace
com.sapportals.wcm.protocol.webdav.server.WDServletException
*     at com.sapportals.wcm.protocol.webdav.server.WDObject.throwNotFoundIf(WDObject.java:54)*
*     at com.sapportals.wcm.protocol.webdav.server.WDGetHandler.handle(WDGetHandler.java:110)*
*     at com.sapportals.wcm.protocol.webdav.server.WDServlet.doGet(WDServlet.java:775)*
*     at com.sapportals.wcm.protocol.webdav.server.WDServlet.service(WDServlet.java:462)*
*     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)*
*     at com.sapportals.wcm.portal.proxy.PCProxyServlet.service(PCProxyServlet.java:334)*
*     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)*
*     at com.sapportals.portal.prt.core.broker.ServletComponentItem$ServletWrapperComponent.doContent(ServletComponentItem.java:110)*
*     at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)*
*     at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)*
*     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)*
*     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)*
*     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)*
*     at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)*
*     at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:646)*
*     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)*
*     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)*
*     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)*
*     at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)*
*     at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)*
*     at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:522)*
*     at java.security.AccessController.doPrivileged(Native Method)*
*     at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:405)*
*     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)*
*     at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)*
*     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)*
*     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)*
*     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)*
*     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)*
*     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)*
*     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)*
*     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)*
*     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)*
*     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)*
*     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)*
*     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)*
*     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)*
*     at java.security.AccessController.doPrivileged(Native Method)*
*     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)*
*     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)*
Can anyone help me out in above situation,
Regards,
Aditya

Aggregates, VLAN's, Jumbo-Frames and cluster interconnect opinions

Hi All,
I'm reviewing my options for a new cluster configuration and would like the opinions of people with more expertise than myself out there.
What I have in mind as follows:
2 x X4170 servers with 8 x NIC's in each.
On each 4170 I was going to configure 2 aggregates with 3 nics in each aggregate as follows
igb0 device in aggr1
igb1 device in aggr1
igb2 device in aggr1
igb3 stand-alone device for iSCSI network
e1000g0 device in aggr2
e1000g1 device in aggr2
e1000g2 device in aggr3
e1000g3 stand-alone device of iSCSI network
Now, on top of these aggregates, I was planning on creating VLAN interfaces which will allow me to connect to our two "public" network segments and for the cluster heartbeat network.
I was then going to configure the vlan's in an IPMP group for failover. I know there are some questions around that configuration in the sense that IPMP will not detect a nic failure if a NIC goes offline in the aggregate, but I could monitor that in a different manner.
At this point, my questions are:
[1] Are vlan's, on top of aggregates, supported withing Solaris Cluster? I've not seen anything in the documentation to mention that it is, or is not for that matter. I see that vlan's are supported, inluding support for cluster interconnects over vlan's.
Now with the standalone interface I want to enable jumbo frames, but I've noticed that the igb.conf file has a global setting for all nic ports, whereas I can enable it for a single nic port in the e1000g.conf kernel driver. My questions are as follows:
[2] What is the general feeling with mixing mtu sizes on the same lan/vlan? Ive seen some comments that this is not a good idea, and some say that it doesnt cause a problem.
[3] If the underlying nic, igb0-2 (aggr1) for example, has 9k mtu enabled, I can force the mtu size (1500) for "normal" networks on the vlan interfaces pointing to my "public" network and cluster interconnect vlan. Does anyone have experience of this causing any issues?
Thanks in advance for all comments/suggestions.

For 1) the question is really "Do I need to enable Jumbo Frames if I don't want to use them (neither public nore private network)" - the answer is no.
For 2) each cluster needs to have its own seperate set of VLANs.
Greets
Thorsten

Portal drive software for Windows 7 (64-bit)

Hi...Experts
We could not find the portal drive software for Windows 7 (64-bit) OS on service market place. The one which is available on market place is working fine for Windows 7 (32-bit ) but it does not work for 64-bit.
Can any one help us to get the 64-Bit Portal Drive
Rgds
PR

1- Set BasicAuthLevel's value to "2" by expand HKEY_LOCAL_MACHINE >> SYSTEM>>CurrentControlSet>>Services>>webClient>>Parameters
2- Restart your computer.
3- Right click "Computer" and click "Map network drive..."
To Letter Field: Set a free drive letter.
To Folder Field: Assume that your webDav address is http://abc.com:50000/irj/go/km/docs/ change it to
abc.com:50000irjgokmdocs
4- Enter your ID an Password
thats all...
Note: The mapping is as follows:
0 - Basic authentication disabled
1 - Basic authentication enabled for SSL shares only
2 or greater - Basic authentication enabled for SSL shares and for non-SSL shares

Portal Drive Authentication Issue

Hi Folks,
I have installed the Portal Drive on my Desktop. It works quite good except the authentication of my user-id.
This means, whenever I connect to a KM folder that can be accessed by "Everyone", everything works well. All functionalities are proper. If I cange a document, I can see that the user is "Guest".
But whenever I try to connect a KM Folder, in which the Access Rights are set only to my user, then the Authentication fails.
What am I doing wrong?
Thanks in advance

Hello,
I am using Portal 7.0 SP16.
I setup Portal Drive in my local system. I am able to connect to a folder in km repository for a machine having only one portal instance.
But when I tried to connect to folder for a machine having two or more portal instance, it is not able to connect.
I tried all the machine with only one portal instance and it works fine but it doesn't connect for machine having more than one portal instance.
Any help would be great to resolve this issue. I am getting error like:
" server is currently experiencing a problem connecting users. Please try later."
regards,
Jaish

Info reg reciever JDBC adapter's driver and connection

Hello,
I have following questions related to JDBC receiver adapter.
1. can I supply jdbc driver and jdbc connection dynamically to supply the DB parameters dynamically?
2. if I cant supply dynamically, how do i achieve this purpose?
3. What are the receiver adapter parameters of JDBC receiver adapter that i can change dynamically?
thanks and regards,
Nikhil.

Hi,
To install JDBC driver follow the how to guide.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/xi-how-to-guides/how%20to%20install%20and%20configure%20external%20drivers%20for%20jdbc%20and%20jms%20adapters.pdf
Configuration of JDBC Adapter for SQL Server
JDBC Driver = com.microsoft.jdbc.sqlserver.SQLServerDriver
Connection = jdbc:microsoft:sqlserver://hostname:<port>;DatabaseName=<DBName>
UserID and Password.
If the connection is not working find the correct port number.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40b92770-db81-2a10-8e91-f747188d8033
JDBC- X I - R/3 Scenario
/people/bhavesh.kantilal/blog/2006/07/03/jdbc-receiver-adapter--synchronous-select-150-step-by-step
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30
Please check the driver path as mentioned below.
JDBC Driver : sun.jdbc.odbc.JdbcOdbcDriver
Connection:jdbc:odbc:Driver={Microsoft Access Driver (*.mdb)};DBQ=//location of DB table.mdb;
No JDBC driver required.
Receiver JDBC scenario MS access - /people/sameer.shadab/blog/2005/10/24/connecting-to-ms-access-using-receiver-jdbc-adapter-without-dsn
follow this thread
Re: Problem when connecting to MS Access through JDBC Adapter.
SAP Note 850116 has details
Thanks,
Satya Kumar
Reward Points If it is Useful..

How to deply Portal to a cluster

Hi,
I am trying to deploy a portal application on a cluster (3 win2000 servers).
I followed the BEA documentation to the letter.
When deploying document.jar to the cluster, each server in a cluster
produces the following exception:
####<Jun 7, 2002 10:47:08 PM MDT> <Warning> <EJB> <opp-raps02dev>
<InvestPortalServer02> <ExecuteThread: '0' for queue:
'__weblogic_admin_rmi_queue'> <system> <> <010063> <The EJB: DocumentManager
had an <initial-beans-in-free-pool> setting in its weblogic-ejb-jar.xml. An
error occurred while creating these initial bean instances. The error was:
Unable to find DocumentConnectionPool 'default' configuration
MBeanjavax.ejb.CreateException: Unable to find DocumentConnectionPool
'default' configuration MBean
at
com.bea.p13n.content.document.internal.SPIFastDocumentManagerImpl.ejbCreate(
SPIFastDocumentManagerImpl.java:324)
at
com.bea.p13n.content.document.internal.SPIFastDocumentManagerImpl_lw366m_Imp
l.ejbCreate(SPIFastDocumentManagerImpl_lw366m_Impl.java:112)
at java.lang.reflect.Method.invoke(Native Method)
at
weblogic.ejb20.pool.StatelessSessionPool.createBean(StatelessSessionPool.jav
a:153)
at weblogic.ejb20.pool.Pool.createInitialBeans(Pool.java:198)
at weblogic.ejb20.pool.Pool.onAfterDeploy(Pool.java:177)
at
weblogic.ejb20.deployer.Deployer.runAfterDeploymentListeners(Deployer.java:1
325)
at weblogic.ejb20.deployer.Deployer.deploy(Deployer.java:1013)
at weblogic.j2ee.EJBComponent.deploy(EJBComponent.java:30)
at weblogic.j2ee.Application.addComponent(Application.java:163)
at weblogic.j2ee.J2EEService.addDeployment(J2EEService.java:117)
at
weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentT
arget.java:329)
at
weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentT
arget.java:144)
at java.lang.reflect.Method.invoke(Native Method)
at
weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl
.java:636)
at
weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:6
21)
at
weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBea
nImpl.java:359)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
at weblogic.management.internal.RemoteMBeanServerImpl_WLSkel.invoke(Unknown
Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:298)
at
weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:267)
at
weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:2
2)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
The DocumentConnectionPool is defined in the "Service Configuration/Document
Connection Pool Service" for the portal application. However, I can not find
any information on how to pass this information to the managed servers.
Has anybody experiensed anything like this?
Thanks
Mike

Problem SOLVED.
In order to deploy portal in a cluster it is not enough to deploy individual components
(as described in the Deployment guide). The config.xml needs to be edited manualy
since the console application does not provide the way of defining the target for
"application-config.xml". The portal services configuration is defined in this file,
and, tharefore it needs to be deployed to the cluster as well in order for portal
services to function properly.
This is how to do this: open the config.xml in your text editor, search for the word
"application-config.xml", in the target option specify the name of your cluster.
Restart the managed servers.
Regards,
Michael Goldverg
"Michael Goldverg" <[email protected]> wrote:
Hi,
I am trying to deploy a portal application on a cluster (3 win2000 servers).
I followed the BEA documentation to the letter.
When deploying document.jar to the cluster, each server in a cluster
produces the following exception:
####<Jun 7, 2002 10:47:08 PM MDT> <Warning> <EJB> <opp-raps02dev>
<InvestPortalServer02> <ExecuteThread: '0' for queue:
'__weblogic_admin_rmi_queue'> <system> <> <010063> <The EJB: DocumentManager
had an <initial-beans-in-free-pool> setting in its weblogic-ejb-jar.xml.
An
error occurred while creating these initial bean instances. The error was:
Unable to find DocumentConnectionPool 'default' configuration
MBeanjavax.ejb.CreateException: Unable to find DocumentConnectionPool
'default' configuration MBean
at
com.bea.p13n.content.document.internal.SPIFastDocumentManagerImpl.ejbCreate(
SPIFastDocumentManagerImpl.java:324)
at
com.bea.p13n.content.document.internal.SPIFastDocumentManagerImpl_lw366m_Imp
l.ejbCreate(SPIFastDocumentManagerImpl_lw366m_Impl.java:112)
at java.lang.reflect.Method.invoke(Native Method)
at
weblogic.ejb20.pool.StatelessSessionPool.createBean(StatelessSessionPool.jav
a:153)
at weblogic.ejb20.pool.Pool.createInitialBeans(Pool.java:198)
at weblogic.ejb20.pool.Pool.onAfterDeploy(Pool.java:177)
at
weblogic.ejb20.deployer.Deployer.runAfterDeploymentListeners(Deployer.java:1
325)
at weblogic.ejb20.deployer.Deployer.deploy(Deployer.java:1013)
at weblogic.j2ee.EJBComponent.deploy(EJBComponent.java:30)
at weblogic.j2ee.Application.addComponent(Application.java:163)
at weblogic.j2ee.J2EEService.addDeployment(J2EEService.java:117)
at
weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentT
arget.java:329)
at
weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentT
arget.java:144)
at java.lang.reflect.Method.invoke(Native Method)
at
weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl
..java:636)
at
weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:6
21)
at
weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBea
nImpl.java:359)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
at weblogic.management.internal.RemoteMBeanServerImpl_WLSkel.invoke(Unknown
Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:298)
at
weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:267)
at
weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:2
2)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
The DocumentConnectionPool is defined in the "Service Configuration/Document
Connection Pool Service" for the portal application. However, I can not
find
any information on how to pass this information to the managed servers.
Has anybody experiensed anything like this?
Thanks
Mike

Lost the access to the first partion of the firewire drive and the data ?

Hello to everybody,
after i moved 5,5GB Data from my internal harddisk, HFS+ , to my external Firewire drive, FAT 32 formatted for compatilibilty with a PC, i lost the access to the first partion of the firewire drive and the data. At first after having appearently finished copying the data a lot of ununderstable numbers and letters appeared on the first partion and couldn't be opened.
Using first aid showed the following messages:
1.
volume „disk2s5“ testing
** /dev/disk2s5
** Phase 1 - Read FAT
** Phase 2 - Check Cluster Chains
** Phase 3 - Checking Directories
Root directory doesn't start a cluster chain
Error: the basic (????? ) process shows an error by finishing (-9972)
German original message:
Fehler: Der zugrundeliegende Prozess meldete einen Fehler beim Beenden. (-9972)
2.
volume „disk2s5“ testing
** /dev/disk2s5
** Phase 1 - Read FAT
** Phase 2 - Check Cluster Chains
** Phase 3 - Checking Directories
Root directory doesn't start a cluster chain
Error: the basic (????? ) process shows an error by finishing (-9972)
German original message:
Fehler: Der zugrundeliegende Prozess meldete einen Fehler beim Beenden. (-9972)
Volume „FIRE2“ testing
** /dev/disk2s6
** Phase 1 - Read FAT
** Phase 2 - Check Cluster Chains
** Phase 3 - Checking Directories
** Phase 4 - Checking for Lost Files
16 files, 726592 free (1880420 clusters)
Volume „FIRE 3“ testing
Mounting Disk** /dev/disk2s7
** Phase 1 - Read FAT
** Phase 2 - Check Cluster Chains
** Phase 3 - Checking Directories
** Phase 4 - Checking for Lost Files
149 files, 2866032 free (441271 clusters)
Volume „FIRE 4“ testing
Mounting Disk** /dev/disk2s8
** Phase 1 - Read FAT
** Phase 2 - Check Cluster Chains
** Phase 3 - Checking Directories
** Phase 4 - Checking for Lost Files
2755 files, 1396016 free (873683 clusters)
3 Volumes tested
0 HFS-Volumes tested
2 Volumes with an other type than HFS tested
1 Volume couldn't be tested
1 Volume wasn't tested
3.
First Aid interrupted the testing of "disk2s5" because the the following error has appeared:
the basic (????? ) process shows an error by finishing
German orignal message:
Das Festplatten-Dienstprogramm hat überprüfen „disk2s5“ unterbrochen, da der folgende Fehler aufgetreten ist:
Der zugrundeliegende Prozess meldete einen Fehler beim Beenden.
As i translated the First Aid messages from german to english they will probably look a bit different in english but i hope you get the idea.
So what can i do to regain access to the first partion and the data ?
If i have to use the terminal then please !!! step by step as i don't have any experience in using it
Greetings and thanks in advance for any hints
Lutz
PD: i was just arranging my data into different categories so could later burn a backup when this happened
g4 AGP 400 MHz Mac OS X (10.3.9) 768 MB SDRAM

Yep, you sure can. That's how I support my family's computers. I just entered their dynamic hostname in ARD, and it always updates their IP address in the ARD list should they have changed.

Portal Drive Cache

Hi All,
I have a question about the portal drive cache.
Portal Drive is a web dav client to connect to your portal content with the windows explorer.
My problem ist that Portal Drive stores cached data on the c:\-drive, in my environment
it is C:\Documents and Settings\tfelp4\Local Settings\Application Data\Xythos\cache.
My requirement is to store the cached files on another drive like d:\, because the c-drive is already full and only
used for storing pinstallation files.
Thanks for helping me
Steve

Any ideas so far??
Thanks in advance
Thomas

Portal Drive Connection Issue

Hello,
I am using Portal 7.0 SP16.
I setup Portal Drive in my local system. I am able to connect to a folder in km repository for a machine having only one portal instance.
But when I tried to connect to folder for a machine having two or more portal instance, it is not able to connect.
I tried all the machine with only one portal instance and it works fine but it doesn't connect for machine having more than one portal instance.
Any help would be great to resolve this issue. I am getting error like:
" server is currently experiencing a problem connecting users. Please try later."
regards,
Jaish

Hi,
Please check the below link.
http://wiki.sdn.sap.com/wiki/display/KMC/Configuring+Portal+Drive
Please make sure your portal drive is installed properly and the configuration settings and you are using the supported version for your system.
Best Regards,
Manoj K

Portal Drive and Cluster

Similar Messages

Maybe you are looking for