Portal----Enable Self-Registration
I want to configure Self-Registration on 10g portal
Following the congiguration guide on OTN, I checked the Enable Self-Registration option .And then go to configure the Login portlet to enable Self-Registration .
Bu I didn't see the enable Self-Registration besides the Login porlet the guide had mentioned.
Has anyone configured this before?
Give me a clue ,Thanks!
Hi
Not sure whether ROS (Registration of new supplier process defined in your organisation). See below high level process over view for New supplier creation .
Strategic Sourcing - Supplier Self-Registration
New suppliers can self-register using a web based application, which potentially can be accessed from the homepage of a company./Basic information is captured in the self-registration form, additional general and category specific information can be gathered in questionnaires. Purchasers then check the data and approve potential suppliers. When searching for new suppliers purchasers can transfer potential suppliers into operational suppliers using a standardized interface (OPI).
In addition to that external supplier databases can also be connected using the OPI - interface.
After being transferred into SRM an admin user in SUS can be generated automatically. In SUS these suppliers have the possibility to maintain the admin user data and create additional users.
Therefore before creation of any new supplier /user there should be a defined process.
regards
Narahari
Similar Messages
-
How to enable self-registration in Oracle10g Portal.
Hi,
How to enable self-registration in Oracle10g Portal.
while I have already enabled self registration from Global settings, but still I'm unable to make users to register theirself because always initial SSO Login Page is Displayed. I think there must be additional steps.
OR
Is there any alternative way, PLSQL API's,Java Portlets or other scripts for user registration.
awaiting for response
regardsHi,
How to enable self-registration in Oracle10g Portal.
while I have already enabled self registration from Global settings, but still I'm unable to make users to register theirself because always initial SSO Login Page is Displayed. I think there must be additional steps.
OR
Is there any alternative way, PLSQL API's,Java Portlets or other scripts for user registration.
awaiting for response
regards -
Synchronization of R/3 User with self Registration in Portal
Dear All,
In Enterprise portal, we have activated self registration. So that user can register to the portal. We have a scenario that once the user is created in the portal through self registration, the same user Id should be generated in R/3. How do we achieve this in the portal?
Kindly help us for the same.
Regards,
AlpaI was reading SAP certification material just now and have a similar question from my client and looking for answers.
I am writing part of information here so that you can do further research: Please update here what was the result of future understandings and if this worked? Ahh have to type all cant copy from the file
To enable sso b/w sap ume and abap based system, users should ideally have same user id's in both the systems. Replicating usre accnts to relevant sap systems is one meathod to ensure the same user ids.
The data is replicated only from ume to sap system and nt vice versa.
UME accmplishes replication by transmit of XML documents.'
Prerequisites:
Ume supports replication of user data to abap sys with release 4.6D or higher. you can replicate to a maz of 3 systems.
users are created with a de-activated pwd in backend so they shud always logon thru ume in portal and access backend by sso logon tickets.
Procedure:
start config tool
2. choose swich to config editor mode
3. navigate to cluster_data_server_cfg_services
4.switch to edit mode
5.double click on com.sap.security.core.ume.services property sheet
6.specify receiving sys, sending sys, and define sys conn. info. for sap sys
7 save property sheet
8 restart cluster for changes
9. add the sending sys. to sap sys acl list. this is done in sap sys via a data browser against the table smum_acl
After all these steps, create a user in EP and see it being present in R3.
PLZ write back for clarfications or doc, or just to let us know the results and conclusions.
Thanks
ANkur agarwal
SAP Portal consultanat -
Can Self-Registration be enabled using ipsadmin?
We have a script to automate installation of the Portal Server. But we cannot find any information that would help us autotmate enabling Self-Registration. To enable Self-Registration manually -- See http://docs.iplanet.com/docs/manuals/portal/30/ag/crprtlsv.htm#13118
You can create a script or do it in command line ...
The iwtAuth-Menu defines a list of the auth menu's selected ..
The attribute would like below ..
<iwt:Att name="iwtAuth-authMenu"
userConfigurable="true"
>
<Val>Membership</Val>
</iwt:Att>
To set the attribute, do:
echo '<iwt:Att name="iwtAuth-authMenu"><Val>Membership</Val></iwt:Att>' | ipsadmin change domain domain_name
HTH .. -
Can't find UME Self-Registration
Hi,
I'm trying do configure a User Self-Registration to SAP Portal. But under
System Administration-> System Configuration -> UME Configuration
I cant't find the tab for it?
I'm looking for the attribute Self-Registration?
Thanks in advance,
ChristianHi Christian Hochwald
plz follow below steps:
1. goto D:\usr\sap\<Inst-ID>\JCxx\j2ee\configtool -->configtoo.bat
ex: D:\usr\sap\J3E\JC01\j2ee\configtool -->configtoo.bat
2.Goto cluster-data --> Global server configuration --> services --> com.sap.security.core.ume.service
3. set below setting
To enable Self Registration property
ume.logon.selfreg = TRUE
Please Reward Points;
Thanks,
Nagaraju -
Self Registration without Company or Workflow approval
Hello,
We have NW2004s SP 10. Is it possible to allow a very simple self registration without using Companies or Workflow approval? The online help seems to imply that this is possible, but I've tried to configure our Portal as such but nothing shows up on our welcome page.
What I've done is the following:
User Admin UI settings:
Enable Self-Registration of Guest Users=true
Display Contact Information Form During Self-Registration = true
All the rest are set to false/blank or default
Visual Admin settings:
Server ->Service -> UME Provider -> ume.logon.selfreg = true
Thanks,
TYou also need to assign the UME Action UME.Selfregister_User to the Everyone group. Use /useradmin to create a UME role called something useful and add the UME action specified.
Now grant that role to the Everyone group.
Cheers -
E-mail pattern for self registration screen
Hello,
We are using WAS version 7.01 SP3 .
We configured the UME to enable self registration.
The generated password sent via Email and everything working correct.
The only problem is that the user can use wrong E-mail pattern and the creation process will continue
(User will create in the system with wrong E-mail pattern for example - XYZ).
When we tried to create user with wrong E-mail pattern in the standard user creation program it raised error message.
We are using the default E-mail pattern on the Configtool.
Is there any way to stop the self registration process if the user enter wrong E-mail pattern?
Thanks for the help
NirHi,
You can try forcing the application to quit as described here:
+To force an application to close, follow these steps:+
+iPhone or iPod touch running iPhone OS 3.0 or later+
+Press and hold the Sleep/Wake button until the red slider appears. When the red slider appears, release the Sleep/Wake button.+
+Instead of dragging the red slider, press and hold the Home button for six seconds.+
+If the device does not return to the Home screen, see the steps below to restart.+
from: http://support.apple.com/kb/TS1445
If the issue persists, you should try restarting before trying to reset.
You can restart the iPhone by holding the Sleep/Wake button until the red slider appears> then slide to turn off> and turn the iPhone back on by pressing the Sleep/Wake again, as described on page 46 of the iPhone User Guide.
http://manuals.info.apple.com/en/iPhoneUserGuide.pdf
-Jason -
Ciao,
is it possible to send user and password credentials, created by self registration, via mail or SMS ?
For example:
- user connect open ssid,
- open browser and ISE, after redirect, present http guest portal with self-registration,
- user compile form of self registration with email or phone fields,
- credentials are send via email (not displayed as default).
Thanks,
Regards, -
Self Registration for UME using LDAP as the datasource
Hi,
Am I able to config the self registration when my UME is mapped to LDAP datasource? If yes, how am I going to do this as I'm not able to find the ume.logon.selfreg=TRUE.
Thanks!Hi,
Isn't this option there in /useradmin ? Go to http://hostname:port/useradmin and click on Configuration. Go to the tab User Admin UI and there select the option for enabling self-registration.
Also, should be available in configtool under the core ume service.
Regards,
Shitij -
Self-Registration not working in EP7 SP13
Hi Experts,
i am using EP7 with SP13, in this i have enabled self registration link in my logon page. When i click on this link it shows registration page, after entering all required information and submit it. Showing message like this
The requested page has been replaced by the new Web Dynpro based administration. Please refer to SAP Note 869852 if you want to use the old administration UI. Click on the following link to access the new administration screen: /useradmin
I followed this SAP Note 869852. they guide us to enable to old UME UIs. then it will work. so develop cant use the new UME WD UIs.
is any other way to fix the issue, doing the self registration in new UME WD UI itself?
please guide me through this..
Regards,
KumarHi Kumar,
If switching back to the HTMLB UIs works for you, first I would like to say: Congratulations. No, really, I don't know anybody who really prefers the WD UI.
Nevertheless, I don't see why using the WD UI should stop someone from using the self registration. This /might/ be a bug, misinterpreting the situation, that the UME UI is needed (which is should not after filling in the self registration form). So, you should consider to open an OSS message about it to get a clarification on this. As SAP provides the new UIs as the new standard, I cannot imagine that they wanted to cut of the self registration functionality when using the new standard...
Hope it helps
Detlev -
Self Registration in Enterprise Portal 7.0
Hi all,
I have done the steps for doing Self Registration.
I have configured the SMTP Server.
Also, the email notification in case of successful
Self Registration is enabled.
The action UME.Selfregister_User is added with the Everyone role.
The SAP Application Server has been restarted but I am not getting the
Self Registration link.
What is needed to enable the url in the portal?
Regards
Neha SinghNeha,
Check this out.
http://help.sap.com/saphelp_nw70/helpdata/en/44/0761cea5c610b3e10000000a11466f/content.htm
http://wiki.sdn.sap.com/wiki/display/EP/Self-RegistrationinPortal
HTH,
Cheers!
Sandeep Tudumu -
Portal Self registration issue
Hi guys,
I had activated Portal self registration with companies feature. what i did is , i assigned one role (ess portal role in which all my ess screens are covered) to authenticated group and every_user_core_role to anonymous group and did necessary configuration in configtool . The problem i am facing is that my self registered users are able to see my portal role without any approval (via approve/ deny in user administration) which i want to show them after approval . PLs guide what might me the issue.
Regards,
Shwetang Saxena.Hello Soni!
Please review and follow the steps mentioned here:
Companies and Self-Registration with Approval (SAP Library - User Management of the Application Server Java)
https://cw.sdn.sap.com/cw/docs/DOC-110636
Hope this helps,
Edison -
Steps to provide supplier self registration link on portal
Hi,
We deployed the supplier collaboration business package on portal. We want to provide the self-registration link on the portal, from where the vendor/suppliers would register.
i have the link, now my question is., What are the steps we need to follow from here to set up the self registration link on portal which eventually takes the supplier or vendor from logon page to registration to portal.
Please provide any cookbooks available.
Thanks,
Raghavendra PothulaHi Masa,
Can you please provide further details on this...
Did you have a custom interface built between the HTML form and the Enterprise Portal self registration form to capture all the information entered. If you used the standard self registration form, how did you make the self registration form available anonymously on your corporate home page.
Any Inputs would be appreciated.
Thanks,
Sundeep -
User self-registration in the portal
I am developing an Intranet site for a very large organization using OPortal 3.0. Since is impossible to manage personally every request to add users to the portal (over 3000 potential users) I need to provide a self-registration procedure so users can register themselves to the portal with certain basic privileges.
Does anybody knows how can I implement such a procedure..?
FernandoHello Fernado,
Look topic name "Using API's for Single Sign On" at this forum.There is an answer to your question.Also you can:
'Create a procedure which does insertion to the tables portal30.wwsec_person$ and portal30_sso.wwsec_person$'.My procedure is:
CREATE OR REPLACE PROCEDURE PORTAL30_SSO.CREATE_USER
(username IN VARCHAR2)
as
begin
insert into portal30.wwsec_person$
(user_name,db_user,created_by_dbuser,created_by_user,password,sso_user_type)values (upper username), 'PORTAL30_PUBLIC','PORTAL30_PUBLIC','PORTAL30','guest','USER');
insert into portal30_sso.wwsec_person$
(user_name,db_user,created_by_dbuser,created_by_user,password,sso_user_type) values (upper(username),'PORTAL30_SSO_PUBLIC','PORTAL30_SSO_PUBLIC','PORTAL30','hy?<K2K0~4FA810F520ACB67945FFFA7F03925269','USER');
end;
After that create a form to this procedure and publish as portlet.Now put this portlet your 'Welcome' window.Here they will have default password 'guest'.Also you can take another parameters like name,lastname,address,etc.
Don't forget to give public privilege to this procedure. -
Portal authentication failing intermittently post self registration
We are in the process of upgrading from EP6 to EP7 and have hit a critical authentication problem that is proving difficult to diagnose and resolve.
Our self registration process leads straight into user logon:
1) the user fills in the registration form with their user ID, password etc and selects Submit which creates the user ID in our R/3 user store
2) the user is presented with text informing them that their registration has been successful and a Proceed button which when selected authenticates them with the portal with their newly created user ID
Step 2) above is working intermittently in our EP7 system - sometimes the process works exactly as expected others an exception is raised (com.sap.security.core.logon.imp.UMELoginException: USER_AUTH_FAILED).
It seems as though the cause is that the user creation process has not completed fully before the logon step.
We tried implementing a wait step (10 seconds) following selection of the Proceed button which reduced the incidence rate of the problem but didn't cure it entirely.
A possible contributing factor is hardware performance as we are testing the upgrade on an impact analysis system which is not as efficient as our live portal landscape.
I've pasted the code which performs the authentication and extracts from the DIAGTOOL portal logs below which show the login module configuration (SAP standard I believe).
Any help/advice what to try next would be greatly appreciated as we are running out of ideas.
Thanks,
Alan
The following code performs the authentication and redirection to the portal user's home page:
public void onRedirect(Event event) throws PageException {
getBean();
//Get resource bundle
ResourceBundle rbSetup =
ResourceBundle.getBundle(
"setup",
((IPortalComponentRequest) this.getRequest()).getLocale());
ILogonAuthentication logonAuthentication =
UMFactory.getLogonAuthenticator();
HttpServletRequest req =
((IPortalComponentRequest) this.getRequest())
.getServletRequest();
HttpServletResponse res =
(IPortalComponentRequest) this
.getRequest())
.getServletResponse(
true);
req.setAttribute(
ILoginConstants.LOGON_UID_ALIAS,
SelfRegBean.getLogonUid());
req.setAttribute(
ILoginConstants.LOGON_PWD_ALIAS,
SelfRegBean.getPassword());
Subject subject = null;
try {
subject = logonAuthentication.logon(req, res, AUTHSCHEME);
if (null != subject) {
res.sendRedirect(rbSetup.getString("REDIRECT_URL"));
} catch (LoginException e) {
SelfRegBean.setError(rb.getString(LOGIN_FAILED));
} catch (IOException e) {
SelfRegBean.setError(rb.getString(REDIRECT_FAILED));
Full exception thrown when the authentication process fails:
com.sap.security.core.logon.imp.UMELoginException: USER_AUTH_FAILED at com.sap.security.core.logon.imp.SAPJ2EEAuthenticator.logon(SAPJ2EEAuthenticator.java:949) at uk.ac.ncl.SelfRegistration$SelfRegistrationDynPage.onRedirect(SelfRegistration.java:507) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sapportals.htmlb.page.DynPage.doProcessCurrentEvent(DynPage.java:172) at com.sapportals.htmlb.page.PageProcessor.handleRequest(PageProcessor.java:115) at com.sapportals.portal.htmlb.page.PageProcessorComponent.doContent(PageProcessorComponent.java:134) at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209) at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114) at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189) at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215) at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645) at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189) at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753) at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240) at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:524) at java.security.AccessController.doPrivileged(Native Method) at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364) at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039) at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265) at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95) at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172) -
Key log extracts from DIAGTOOL:
Exception on login:
[EXCEPTION]
com.sap.security.core.server.userstore.UserstoreException: Could not refresh user postsp15p
Caused by: com.sap.security.api.NoSuchUserAccountException: USER_AUTH_FAILED: User account for logonid "postsp15p" not found!
LOGIN.FAILED
User: N/A
Authentication Stack: ticket
Login Module Flag Initialize Login Commit Abort Details
1. com.sap.security.core.server.jaas.EvaluateTicketLoginModule SUFFICIENT ok false true
#1 ume.configuration.active = true
2. com.sap.engine.services.security.server.jaas.BasicPasswordLoginModule REQUISITE ok exception true Authentication did not succeed.
3. com.sap.security.core.server.jaas.CreateTicketLoginModule OPTIONAL ok true
#1 ume.configuration.active = true
com.sap.security.core.logon.imp.UMELoginException:
ObjectID handed over is 'null'!
Guest | LOGIN.ERROR | null | | Login Method=[uidpwdlogon], UserID=[null], IP Address=[10.64.65.191], Reason=[Authentication did not succeed.]
USER_AUTH_FAILEDWe are in the process of upgrading from EP6 to EP7 and have hit a critical authentication problem that is proving difficult to diagnose and resolve.
Our self registration process leads straight into user logon:
1) the user fills in the registration form with their user ID, password etc and selects Submit which creates the user ID in our R/3 user store
2) the user is presented with text informing them that their registration has been successful and a Proceed button which when selected authenticates them with the portal with their newly created user ID
Step 2) above is working intermittently in our EP7 system - sometimes the process works exactly as expected others an exception is raised (com.sap.security.core.logon.imp.UMELoginException: USER_AUTH_FAILED).
It seems as though the cause is that the user creation process has not completed fully before the logon step.
We tried implementing a wait step (10 seconds) following selection of the Proceed button which reduced the incidence rate of the problem but didn't cure it entirely.
A possible contributing factor is hardware performance as we are testing the upgrade on an impact analysis system which is not as efficient as our live portal landscape.
I've pasted the code which performs the authentication and extracts from the DIAGTOOL portal logs below which show the login module configuration (SAP standard I believe).
Any help/advice what to try next would be greatly appreciated as we are running out of ideas.
Thanks,
Alan
The following code performs the authentication and redirection to the portal user's home page:
public void onRedirect(Event event) throws PageException {
getBean();
//Get resource bundle
ResourceBundle rbSetup =
ResourceBundle.getBundle(
"setup",
((IPortalComponentRequest) this.getRequest()).getLocale());
ILogonAuthentication logonAuthentication =
UMFactory.getLogonAuthenticator();
HttpServletRequest req =
((IPortalComponentRequest) this.getRequest())
.getServletRequest();
HttpServletResponse res =
(IPortalComponentRequest) this
.getRequest())
.getServletResponse(
true);
req.setAttribute(
ILoginConstants.LOGON_UID_ALIAS,
SelfRegBean.getLogonUid());
req.setAttribute(
ILoginConstants.LOGON_PWD_ALIAS,
SelfRegBean.getPassword());
Subject subject = null;
try {
subject = logonAuthentication.logon(req, res, AUTHSCHEME);
if (null != subject) {
res.sendRedirect(rbSetup.getString("REDIRECT_URL"));
} catch (LoginException e) {
SelfRegBean.setError(rb.getString(LOGIN_FAILED));
} catch (IOException e) {
SelfRegBean.setError(rb.getString(REDIRECT_FAILED));
Full exception thrown when the authentication process fails:
com.sap.security.core.logon.imp.UMELoginException: USER_AUTH_FAILED at com.sap.security.core.logon.imp.SAPJ2EEAuthenticator.logon(SAPJ2EEAuthenticator.java:949) at uk.ac.ncl.SelfRegistration$SelfRegistrationDynPage.onRedirect(SelfRegistration.java:507) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sapportals.htmlb.page.DynPage.doProcessCurrentEvent(DynPage.java:172) at com.sapportals.htmlb.page.PageProcessor.handleRequest(PageProcessor.java:115) at com.sapportals.portal.htmlb.page.PageProcessorComponent.doContent(PageProcessorComponent.java:134) at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209) at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114) at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189) at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215) at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645) at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189) at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753) at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240) at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:524) at java.security.AccessController.doPrivileged(Native Method) at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364) at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039) at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265) at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95) at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172) -
Key log extracts from DIAGTOOL:
Exception on login:
[EXCEPTION]
com.sap.security.core.server.userstore.UserstoreException: Could not refresh user postsp15p
Caused by: com.sap.security.api.NoSuchUserAccountException: USER_AUTH_FAILED: User account for logonid "postsp15p" not found!
LOGIN.FAILED
User: N/A
Authentication Stack: ticket
Login Module Flag Initialize Login Commit Abort Details
1. com.sap.security.core.server.jaas.EvaluateTicketLoginModule SUFFICIENT ok false true
#1 ume.configuration.active = true
2. com.sap.engine.services.security.server.jaas.BasicPasswordLoginModule REQUISITE ok exception true Authentication did not succeed.
3. com.sap.security.core.server.jaas.CreateTicketLoginModule OPTIONAL ok true
#1 ume.configuration.active = true
com.sap.security.core.logon.imp.UMELoginException:
ObjectID handed over is 'null'!
Guest | LOGIN.ERROR | null | | Login Method=[uidpwdlogon], UserID=[null], IP Address=[10.64.65.191], Reason=[Authentication did not succeed.]
USER_AUTH_FAILED
Maybe you are looking for
-
Which is the best ad system to use?
are any of them free and which one is the best?
-
Why my files name switch from small letters to capital letters?
Hi guys, I've a weird problem working with Illustrator CS6. It doesn't happen all the times but sometimes my files name switch from small letters to capital. For example the file "file.ai" becomes "FILE.AI" What could be the reason?
-
Elements 12 - want to print a 4 x 6 photo
Elements 12 - About to print a photo.... can't change the: paper type - one choice only = plain paper paper tray - one choice only = main tray paper size - one choice only = 8 x 10
-
I purchased a tv episode on my ipad. It started to download, after an hour it gave an error message. The episode appeared in videos, I watched it. Then I discovered it was still downloading. It gets up to the end, then starts all over again. Nothing
-
How can I recover lost mails received ?