Portal favorites open in same window after upgrade

Dear Experts,
After upgrade Portal from EP 7.0.1 SP3 TO SP8 KMC Patch 1, we are facing some issues, the issue is, clicking on the favorites link opens the page in the same window. But in the page properties we have mentioned to open in a new window and via detailed navigation it is opening in the new window only. But when we add this page in portal favorites and click on the link from favorites, it is opening in the same screen.
Thanks,
Jay

Hi Guys. Thanks so much for replying.
Cedric - I'm in 08. I posted in the 06 forum first by mistake. And I basically don't know "how" I built the site. I just kind of poked around like I usually do, trial by many errors.
Roddy - I've had the folder and index on my desktop. I hadn't previously uploaded the index and just did so but nothing's changed. My host company doesn't have an actual control panel. I have a feeling it's not a great one. At least for a beginner. Is there anything on their site I should be looking for?
Cyclo - I hadn't nothiced the Hear button working correctly, since I haven't actually been working there yet! You're right it works. I guess I do have to rebuild the text buttons as you say. I guess this is the down fall of not knowing HTML.
I really appreciate all the input folks.
Dave

Similar Messages

Cannot open new finder window after upgrading to Maverick 10.9.2

Hello friends,
I am experiencing a very strange issue.
I cannot access the contents of my files via the finder. I can access my files via open or save as from separate applications.
I have tried the following:
Finder ---> New Finder Window (finder flashes or switches to an existing open application)
Double-clicking on existing folders (finder flashes or switches to an existing open application)
Double-clicking on the icon of my Macintosh HD (finder flashes or switches to an existing open application)
From Dock, click on downloaded document and choose "Open in Finder" (finder flashes or switches to an existing open application)
From iPhoto, select a photo, and select "Reveal in Finder" (nothing happens)
Restart machine has not fixed the issue
After several tries, I get an error displaying that there was an issue with the finder.
I am running Maverick 10.9.2

Unfortunately, Finder is a part of OS level files. So, we have a couple of options.
First off, let's see if there's a software conflict somewhere. Boot into safe mode (boot the comptuer with the shift key held down) and try there. If it works in safe mode, odds are we either have a 3rd party KEXT or application blocking its launch. Check your login items (Apple -> System Preferences -> users & groups -> select your user -> login items), and disable them.
Also check your startup items (you'll have to do this in safe mode as it requires Finder).
/library/startupitems
If Safe Mode/removing startup/login items doesn't work:
First, boot in to the recovery partition (boot the computer with command + r held down). Launch disk utility, and repair both disk permissions and the disk. Reboot and try again.
If that fails, boot into recovery again, and reinstall.

Why can't I open my numbers docs after upgrade to 3.0?

why can't I open my numbers docs after upgrade to 3.0? I have downloaded Maverick. I had the same problem with Pages at first. Is there any way to get my spreadsheets back? I'm nervous about upgrades anymore.

If you recently updated to Mavericks and updated the Numbers to 3.0 then it is likely you are trying to open a Numbers 3.0 file with Numbers 2.3.
Numbers 2.3 Numbers 3.0
Be sure you are careful about which version you are launching and using to open files. If you want to be able to open a file in Numbers 2.3 then you should continue using Numbers 2.3 (which is located in the folder "/Applications/iWork '09")
If you already opened a Numbers file in 3.0 and saved if but want to open in 2.3 you can export from Numbers 3.0 by using the menu item "File > Export To > Numbers '09..."

Can't open my photo library after upgrading to iPhoto 11. is it possible to load iPhoto 9.0.1 after loading 11? have followed all other instructions but it still won't let me open iPhoto.

can't open my photo library after upgrading to iphoto 11. Is it possible to download iphoto 9.0.1 after installing '11. Have followed all the other instructions and am in a loop which doesn't allow me to access iphoto or my photos.

when iphoto wouldnt open we read the trouble shooting info and it said that we may have needed to download 9.0.1 if we had an older version. We obviously didn't download it before the upgrade and wondered if it would cause problems or indeed solve the problem if we downloaded it now!
When we try to open iphoto is says:
To open your library with this version of iphoto it first needs to be prepared
To prepare the library use the iphoto library upgrader available from Apple.
We have downloaded this twice now and it still sends us this message when we try to open iphoto.

How can I use terminal to make links open in same window the default behaviour, as it was in Safari 5.0, How can I use terminal to make links open in same window the default behaviour, as it was in Safari 5.0

In Lion, the default of pressing a link on a web page, is to open the page in a new tab. In itself, I do like this because this is what I did for 19 out of any 20 links, which I command+clicked in previous Safari versions.
However, there is a snag to this behaviour. Most (all?) secure site do not like links to be opened in a new tab. For example, when I am doing Web banking, The the linked page doesn’t open in new tab. Rather I get a page telling me my login session is expired. Probably a security measure instituted by my bank.
I since found out, that a command-click opens lings in the same window. Theoretically that solves the problem, if I would think about this all the time. I don't. Old habits die slowly.
Is there a terminal command to make links open in same window the default behaviour, as it was in Safari 5.0.

Hi Eric,
I got it figured out today, basically you have to load the Parallel Flash Loader first into FPGA ram. It is a special .sof file (pfl_epXXXX.sof) based on your FPGA. Code is actually pretty straight forward, using the Sys Exec VI. Use the windows based programmer to generate the .cdf file that identifies your FPGA, attached Flash and .pof file .
Syntax was odd going into Sys Exec. Note the extra "C" in in front of the "quartus_prm.exe" I have no idea why that was needed, but I was getting an error until I just happened to put it in there (Blind Luck :-))
I used a 2 element array going into a four loop
cmd /cquartus_pgm.exe -c USB-BLASTER -m JTAG -o P;pfl_epXXXX.sof
cmd /cquartus_pgm.exe -c USB-BLASTER -m JTAG S_FPGA.cdf
Defining the working director C:\altera\12.1sp1\qprogrammer\bin
And added match string with "Successfully performed operation" on the output in the loop to make sure everything loaded correctly then adding the array to give me a overall P/F
To anyone doing this same thing Altera's documentation is poor to say the least. It took most of a week to figure this out Not allowed to upload code, so anyone wanting details just post here and I will try to help. This was painful, with lots of lessons learned.
Thanks for the interest though
Best regards John

HTML and XML files open in same window(KM Navigation iView)

Hi All,
I have created a KM navigation which is pointing the folder inside the documents repository. This folder contains HTML and XML files. It is rendering fine. But, when I click on the file links in KM Navigation iView, it is opening in new window.Here I need to open in same window. How can I acheive this?. Please help me.
Thanks & Regards,
Venkatesh R

Hi ,
check the below thread and try options mentioned in it
https://www.sdn.sap.com/irj/sdn/thread?threadID=72594
Koti Reddy

XML Edit Form should open in Same window (Not a popup).

Hi all,
I have requirement to open the Edit form in Same window (Not a popup).
Assign the NewsExplorer Layout the user has edit and delete button. If the user edit the news it should not open in new window.while edit also should open in same window.
And while creating the news by using Xml form the EDIT form open in new window but i my requirement to open in same window.
Its possible? How to achieve this? Helpful replies will be appreciated.
Thanks and Regards
Thillai J

Not solved

Menubuilder- Open in Same Window?

I have the advanced link setting for my links as "Open in
same window." The links continue to open in new windows. Is this
feature not desinged to launch the files in the same window as the
menu. Please help. Thanks.

Hi MissDona
I'm going to say "it depends". Normally, this is the default
behavior. But it likely will depend on the output type you are
creating. For example (and I'm somewhat assuming you fall into this
category) if you create .EXE output from MenuBuilder, a new
instance or window always opens, as MenuBuilder packages up the
Flash Player inside the .EXE. Thus, this version of the player runs
from a temporary location and has no clue about other movies and
whatnot.
Cheers... Rick

Stuck in a "loop" at the login window after upgrading to Leopard

I bought a new iMac Oct 26. It contained Tiger, and included a disk for installing Leopard. I easily got the machine up and running using Tiger, but last night I attempted to install Leopard. When the installation was complete, I tried to get it running. A screen asking for my password came up. I keyed that in and hit logon. Back came the screen asking for the password. To make long story short, I tried everything I could last night, and then called Apple Support this morning. Took quite a while, but I was back in business this afternoon. The technician who helped me sent me the email copied below describing the solution. Perhaps it will help someone else? Romelle
Hello from Apple!
Charles at Apple Service & Support thought that you might find this article useful. We hope that it helps resolve your technical issue.
Link: http://www.info.apple.com/kbnum/n306965
Mac OS X 10.5, iMac (Late 2007): Stuck in a "loop" at the login window after upgrading to Leopard
Issue or symptom
After installing Mac OS X 10.5 Leopard on a 20-inch or 24-inch iMac (Late 2007) computer, you may not be able to log in at the login window. Your login name and password are apparently accepted, but after a blue screen appears for a few seconds, the login window reappears instead of your desktop.
Products affected
20-inch or 24-inch iMac (Late 2007) computer with 2.0, 2.4, or 2.8 GHz processors
Mac OS X 10.5 Leopard
Solution
If Leopard is installed
Start up from the Leopard Install DVD and perform an Archive and Install installation (and select Preserve Users and Network Settings).
After the Archive and Install is complete, you should be able to successfully log in. Use Software Update to install any other updates.
Important: Install the iMac Software Update 1.3 for Leopard after the Archive and Install is complete.
If Leopard is not yet installed
If you have not yet installed Leopard on your 20-inch or 24-inch aluminum iMac computer with a 2.0, 2.4, or 2.8 GHz processor running Mac OS X 10.4.x, but previously installed the iMac Software Update 1.2, you should install the iMac Software Update 1.2.1 (Tiger) or later, before installing Leopard.
Thank you,
Apple

If Leopard came pre-installed and this is a new machne, then the disks that came in the box should let you archive install preserving users & network settings. The disks have a grey label, and if you get more than one use disk #1 for this procedure.
Hold down the "option" (also known as "alt" on the new keyboards) key when starting up with disk #1 in the optical drive. Select the install disk icon on the grey screen and click the arrow. Then when you get to the "select destination pane, click the options button after selecting your hard drive as the destination. In options A& I preserving should be checked by default, if not, select them. Click "ok" to dismiss the options pane, then run the installation.
If this does not work for you, call apple support. They want everything to work. Be patient, they are real busy these days.
Slim

Opening new navigator window after clicking to "commandLink"

Hi, what I can do for opening new navigation window after I will click on element inside "commandLink"

You can use onmouseup an onkeyup events to open the new window in javascript.

Can't open old Numbers spreadsheet after upgrading Mac to Yosemite. Error message says it should first be upgraded to Numbers 09 but doesn't provide method to do so? Help?

Can't open old Numbers spreadsheet after upgrading Mac to Yosemite. Error message says it should first be upgraded to Numbers 09 but doesn't provide method to do so? Help?

There is a chance the spreadsheets were made with a Numbers or AppleWorks version so old that it's not compatible anymore with the latest Numbers version (yes this can happen)

How to open portal favorites in a new window?

Hi,
we want that when a user clics in a portal favorites link, the iview gets opened in a new window.
I have been searching in the forums and tried all the "solutions" but none of them worked,
I tried:
- Setting the portal favorites iview property ¨Launch in new window : display in a headerless portal window¨
- Tried setting the parameter ¨Targe Window Type: blank¨ in the collection renderer of the layout set of the favorites iview
any hints?
(using EP 7.0 SPS 20)
best regards,
Marco.

Hi Marco,
I have checked this issue and there it is not possible to force the
iview which are opening portal content or portal pages as this is
hardcoded.
In PortalFavorites iView, portal pages are opening always in the portal
area, when iView is in the portal area, or into another window, when the
iView is called as standalone ( see 'Organize Entries' link from tray
option).
So there is no way to open into a new window portal pages direct from
Portal Favorites.This works as designs unfortunately .
Regards
Shrikant

Keep focus in the same window after opening a new window per key-event

I have an application in which user can press on a specific key, and that opens a new window in a JFrame. User might want open a few of such windows in a row by changing the cursor position and pressing the same letter key. But the problem is that with every new window Java VM transfers the focus to that new window. User is forced either to click to regain focus, or to move the mouse out-and-in the window, in which case the focus returns to it as well, assuming the X11 style of focus by cursor position of course.
Is there any way to keep the focus with the window on which the cursor is placed?

In your ActionListener your code should be something like:
JFrame anotherOne = new JFrame();
anotherOne.setVisible(true);
originalFrame.requestFocusInWindow();If you need further help then you need to create a [Short, Self Contained, Compilable and Executable, Example Program (SSCCE)|http://sscce.org], that demonstrates the incorrect behaviour.
Don't forget to use the Code Formatting Tags so the posted code retains its original formatting. That is done by selecting the code and then clicking on the "Code" button above the question input area.

Create favorite open in new Window

Hi,
I have a new Command "Add to Portal Favorites" includet in the Search Result. I would now that the "Add to Portal Favorites" funktion open in a new window.
how can i do this?
Thanks for help
Thomas

Hi Thomas,
You can import "com.sap.km.cm" par file and check out the coding of Portal Favourites ...You can implement it in the same way...
You may also go through these links
http://help.sap.com/saphelp_nw04/helpdata/en/f3/00e3646ac44e99ab11cf73ab920bfb/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/3a/d609e5803111d5992f00508b6b8b11/frameset.htm
You can view this forum thread too ......
How can i add a new link to Portal favorites?
Regards
Radhika Kuthiala
P.S You can award appropriate points:)

VPN Server broken with Windows after upgrade from Tiger.

Hey there
I use Tiger 10.4 Server on a PowerMac G4.
It has two network interfaces, one public facing with it's own static IP, and the other internal facing.
The VPN service works perfectly, and allows people to connect via L2TP and assignes them an IP on the internal facing subnet, and allows OS X and Windows clients to connect.
However after upgrading to Leopard, only Mac clients can connect, all the Windows clients connect, and although they get an IP and are able to ping destinations, attempts to connect to these destinations (some of which are web apps on port 80, others are file servers running Samba), they just sit waiting for ever.
I've experimented with this problem, and it appears to be a problem with MTU and packet fragmentation, however these settings appear to be the same between Tiger, which worked, and Leopard which does not work.
Does anyone have any experience with the new VPN Server in Leopard, and can offer me any advice on how to fix this problem? I'm currently downgraded to Tiger again until a fix can be found.

I had the same issue, among others, but I finally got everything to work eventually. It seems that if the IP range of the client connecting to VPN is in the same range of the server LAN, there will be connectivity issues, whether it be pcs and/or macs not being able to connect. The following set up got my VPN services working:
1. Get DNS and Open Directory working properly. When I did an upgrade, the Server Admin updated my zone files with a curious extra space, which killed DNS. For example, I had the name server as ns.company.private., but in the files it would say ns. company.private everywhere! I've been reading about various bugs in upgrading DNS, so I think it's best just to start DNS from scratch. But if you are upgrading, the following thread expalins how to go about setting up DNS and Open Directory: http://discussions.apple.com/thread.jspa?messageID=5957209&#5957209
2. Once you have Open directory users and dns working properly, then set up VPN. Give a unique IP range to the internal network (192.168.7.1/24) that other networks will not emulate. If you use 192.168.1.1, you will likely run into issues. You can always test this method out by changing the IP range from a remote location and trying to get in this way instead of changing the server. Also, be aware that if you use Gateway Assistant within NAT, it will automatically give you a 192.168.1.1/24 range, at least that's been my experience, and this always killed VPN for me. I would set up NAT manually to avoid problems.
3. Ensure that the DNS information under the Client Information tab is correct. For my server I have 192.168.9.1 as the nameserver, and company.private as the search domain. Then set up routing tables. Mine are 192.168.0.0:255.255.0.0 private and 0.0.0.0:0.0.0.0 public.
Also, when you restart the server, stop and restart VPN services, as there is some talk about the Tiger bug still being around, where VPN services are messed up upon startup. This all worked for me and a couple others that had similar server set ups. Hopefully this will work for you.

Portal favorites open in same window after upgrade

Similar Messages

Maybe you are looking for