Portal Forms are not displayed in the new migrated environment.
Hi All,
We have a distributed Portal environment. Application server and Portal Repository running on one system(System1) and one more portal repository and portal components existing in anothor system(System2). Through DAD we connect to System2 and access the componets. Recently we have done a migration.The Database along the Portal Repository in system2 was migrated to a new server. For this we have edited the DAD and made the necessary changes. But after the migration, the Forms residing in migrated portal repository(System2) are not getting dispayed.The rest of the things(Reports, Pages, Links,LOVs etc..) are working fine. The forms are not getting displayed in the pages where it's added. When forms are run from RUN link in Develop Tab it's showing ERROR but not the cause of the error. Will anyone tell what changes I have to do to make the Forms work?
Thanks in Advance,
Tom
Hi DIAdemUser1,
This feature was indeed removed. R&D felt like it caused more confusion than benefit, and I agree. I do apologize to you and others who liked the feature that has now disappeared. When DIAdem 9.0 released the custom properties in the Data Portal showed their data types, but that feature was also removed in favor of simplicity. I often miss that feature, but it's for the greater good.
Brad Turpin
DIAdem Product Support Engineer
National Instruments
Similar Messages
-
Infopath forms are not displaying in the list
Hi,
I have created an info path form template after customizing a list form using infopath designer. But it is behaving weird. After submitting the form it is not displaying in the lists allitems view rather it is displaying from designer but directly
under the list not in the items folder.
1) Any idea why this is happening?
2) What is the use of NaN.xml? why it gets created in the list?Yes, it sounds very simply, but there is a very tiny little broken piece causing lots troubles.
It’s tiny piece, so the solution is going to be very simple. On the other hand, it’s hard to find out because it is very tiny broken piece.
I have feeling that you made a mistake while saving/publishing or filename in submit option (I don’t think List InfoPath form let you set up different submit option).
Sometimes, it is much faster and easier to re-do it again. I recommend you to following the article below. You can skip most but please pay attention on the start (beginning of Part 2 – Customizing)) and on the end (Part 4 - Publishing)
http://msdn.microsoft.com/en-us/library/office/gg180738(v=office.14).aspx
Once you follow the best practice written in the article and make it work, then you may realize the difference and mistake.
백상하 - Stop hacking my blog http://blog.naver.com/agilepoint
쉐어포인트 배움터 http://sharepointkorea.com -
Form develper 9i. (form are not displaying on the browser after compiling)
I run oracle 9i version 2, and internet developer suit on my system. Idesigning my forms and the codes to run behind them with the form developer. If I click the
"run form" button during testing, the form will compile successfully, but will never display. The system will only display "Website found, waiting for reply". I believe nothing is wrong with my installation since i was able to make connection to the database through the form developer. What do you think is the problem and how can I solve it.
Frankfurt Moses Ogunfunminiyi
Osun-State
NigeriaHello,
Use Condence symbol 'C' in the respective fields.
®UH-STRAS(C)& / ®UH-ORT01& / ®UH-PSTLZ& / &LV_REGIO(C)&
Regards, -
The Forms are not displaying correctly
the Forms are not displaying correctly. Editing mode and printing mode are missing contents of notes/text field (Additional Notes, Background or Need, Project Summary). Second issue is when viewing/printing a Project Profile - Short Form, the text fields
are shrink, they are not displayed full high to show all the text. It was working with IE9, IE10, but now IE10 and IE11 dont work.tested with Google Chrome and that seems to work the best in terms of viewing and printing the forms.
Then you could try spoofing Google Chrome using a User-Agent string override and Document mode Edge. Or open IECompatData.xml to see if you should have Compatibility View enabling Microsoft's list. Or report your problem symptom and
desired override here:
http://www.modern.ie/report-compat-problem
Ref:
http://msdn.microsoft.com/en-us/library/gg699485(v=VS.85).aspx
Robert Aldwinckle -
Analyzer - Bitmaps on forms are not displaying
We are running Analyzer 5.02 (and 5.03) SQL Server enterprise repository. Web Java Client.Form view bitmaps are not displaying on the load of the form. The only way to view the bitmap is to either refresh the view or toggle the main menu button. This occurs using BMP, JPEG or JPG files. Only one bitmap is used per form, file size is around 1600 KB for BMP and 17 KB for JPG.Hyperion Support has no answer. Does anyone else?
Check you clients using "jview" to see if it they are running at least JVM verion 5.00.3186 or later. The lastest is always better. We had the same problem before, but after making sure every clients run the latest jvm, the bitmaps display OK now. Also I suggest you should reduce the size of your bitmap. Sam Sukjirawat---Message Posted by jtocci 3/20/02 11:43---We are running Analyzer 5.02 (and 5.03) SQL Server enterprise repository. Web Java Client.Form view bitmaps are not displaying on the load of the form. The only way to view the bitmap is to either refresh the view or toggle the main menu button. This occurs using BMP, JPEG or JPG files. Only one bitmap is used per form, file size is around 1600 KB for BMP and 17 KB for JPG.Hyperion Support has no answer. Does anyone else?
-
Chinese characters are not displayed in the Firefox bookmarks
Chinese characters are not displayed in the Firefox bookmarks. The name looks like e.g. "??????? ???? cn.nytimes.com"
Chinese character of the site name is displayed ok in the head of the browser window and there is no problem reading chinese web content. I use Firefox Portable 11 /English from portableapps.com in Windows XP.
I googled and got some tips:
1) Set your browser to recognise Chinese language internet sites.
Windows users: Under "Tools - Options" on your browser's menu-bar add Chinese to the languages list.
- I did this.
2) Set your browser's "Character Set" or "Encoding" to UTF-8 (sometimes also called Universal Alphabet or Unicode).
Encoding settings can be changed under the "View" option in your browser's menu-bar.
- It was already set to UTF-8.
3) Windows users: If Chinese text still does not display correctly, East Asian language support may need to be enabled.
- This has been done when I installed Windows.
I still don't get any Chinese fonts in the bookmark names. I can edit the bookmark name with chinese characters and then save the bookmark, it works fine. But why does not Firefox recognize the characters when saving bookmarks? Help is appreciated.No I didn't change anything deep beneath the hood. My problem didn't apply to the URL, but to the name of the link or bookmark header or whatever you would like to call it. (When hitting Ctrl + D there is a Name field). I only got ???????? instead of chinese characters in the name. Also for e.g. www.cntv.cn ...but maybe all China is not in the whitelist either. ;-) But anyway, this was not the real problem for me.
Apparently I was wrong as after a reboot of the computer it worked. The solution seemed to be to add Chinese to the language list. I don't know why it was not enough to restart Firefox?
Now I only have problems to show chinese characters in the name field of my external link manager... But I guess it is not an issue for Mozilla. -
Leading zeros are not displaying in the excel
Hi Experts,
Leading zeros are not displaying in the excel
Here is the situation:
I have developed one report, which will create the file in Application server with TAB deleimeted. After that I am sending that file via email in the excel format using Email functionality FM.
Normally our material numbers will start with zeros.
But when I check the email excel file , leading zeros are not displaying.
Even I checked the application server (AL11) file, zeros are there.
I thought program FM was wrong and I tried it manually by downloading the file into excel. Eventhough it is suppressing zeros.
Could you please advise, how to display leading zeros to the material number in excel file.
Thanks in advance
RaghuApplication server file showing zeros infront of the material number.
1200# 0012401387# XXXXXXXX
Once file created in app server, I am using one custom FM to send that output in excel format / txt format via email.
when I send txt file via email, I am getting leading zeros. But when I send xls file via email, I am not getting zeros.
I checked custom FUNCTION MODULE . No mistakes in that.
===
Sudhir,
As you said, I passed ( ' ) single quote infront of the material number. When I check the excel file, single quote also displaying like this '0000100.
Application server file showing like below
1200# '0012401387# XXXXXXXX
===
Could you please advise anyone how can we acheive this.
Thanks -
My previous calls are not displaying in the recent call section. How can I fix this?
There are some recovery programs out there if you google them - many with free trials. I haven't tried them so I have no opinion.Read any professional tech and user reviews you can find before you try one. I have read here in the past that some have worked for people who have posted here.
To help in the future, have you considered using Jump Desktop - Remote Desktop? I know it won't solve the problem you're dealing with now (unless notes were taken on your computer.) It's in the app store. It's the #1 paid app in the business category and the reviews are great. It allows you to see anything that's on your computer on your ipad. If you take your notes on your ipad then you might want to email them to yourself, put them on Word in your computer, for example, and then if you need them in class, you remotely connect your ipad to your computer and you will see your notes. This way you won't have to rely so much on the cloud. The explanation would be too long here, but you might want to take a look at it. You can use the free trial on jumpdesk.com and then if it works for you, buy it in the app store.
Meanwhile, it's hours since you sent this post. Hopefully others who can help solve your problem who are on this forum now can help you. I hope you get your notes back. Don't give up too quickly.
Hope this helps. -
Portal Forms are not getting displayed in the new oracle environment.
Hi All,
The Forms in our Portal applications are not getting displayed after we have done the upgradation of Database in Unix from 8i to 9i. The reports are working fine.The forms that were added as portlets are not getting displayed and other forms that are called thorough links returns error when it is run. The Newly created forms are also not running but returns error. The Portal Version is 3.0.9.8.3. Pls help.
Regards,
TomHi ,
Based on the requirement , check whether the customer contact has been done carried out for the invoice , then possibility it must have gone out of the worklist , chekc whether the Invoice posted in the AR has been transferred to FSCM collection . -
Groups are not displaying in the user's member of tab
Hi ,
We have a issue,
After mapping any AD group in CMC,the groups and users are displaying in the cmc list. but when we go to the properties of the user and member of option ,the groups are not displaying .
After restarting the CMS every thing works fine.
Every time after adding a new user we should restart the CMS, it is very difficult for us as number of users are working on this .
We are using number of AD groups.
Is there any resolution for this with out restarting the CMS.
Thank you in advance.
Environment -
BO XI3.1,
LDAP authentication.
Thanks & Regards,
Collin.The LDAP graph is responsible for showing the membership when viewing the user properties, an issue like this would indicate the graph is not auto updating. It normally builds when starting the CMS then every 15 minutes or so for new users (depending on system activity). It shouldn't lose any info (if it does this indicates a caching or communication problem with AD). There is a graphtimeout setting in the registry (search SAP notes) if this were disabled then it may cause similar symptoms.
I'm not aware of any bugs in 3.1 causing this behavior so you may need to open a case with support (authentication team) to help troubleshoot.
Regards,
Tim -
Buttons are not displayed for the first time when drawImage method is used
Hi
In my swing window 2 buttons are there and when clicking these buttons, it should display an image . The two buttons are displayed at the first time and I can click on it . While clicking a button , the corresponding image is also got displayed. [ I am using drawImage() function for it] But what the problem is, then the two buttons are not displayed and it will be displayed again when the mouse moves along the position of these two buttons. And this problem occurs only at the first time..When they are on the window on a second time, they won't vanish when the image is displayed when clicking it. Is this the problem with paint() method?. I am using start() method also.
Please help me!
Thank YouHi
This is not my exact program, that has a large no: of code. So I am putting here a sample one. One thing I would like to point out is that , I can see the buttons at the time of loading the applet and suddenly it vanishes and the image is drawn. Then if I move the mouse along the position of these buttons , they got displayed.
import java.awt.*;
import javax.swing.*;
/*<applet code = MyClass width = 500 height = 500>
</applet>
public class MyClass extends JApplet
Image img;
JButton b1,b2;
Container cp;
Canvas1 cv;
class Canvas1 extends JPanel
public void paint(Graphics g)
super.paint(g);
g.setColor(Color.black);
g.fillRect(0,0,500,500);
img = getImage(getCodeBase(),"image1.jpeg");
g.drawImage(img,20,20,this);
public void start()
cv = new Canvas1();
cv.setBounds(0,0,500,500);
cp.add(cv);
public void init()
setLayout(null);
cp = getContentPane();
b1 = new JButton("Button1");
b1.setBounds(1,1,100,30);
cp.add(b1);
b2 = new JButton("Button2");
b2.setBounds(200,1,100,30);
cp.add(b2);
It would be very helpful to me if you could fix the problem.
Thank You. -
User Forms are not displaying in SAP B1 2005
Hi,
I have created an application using SAP B1 2004. All user forms are displaying properly in SAP B1 2004. But when I am trying to run the same application in SAP B1 2005, It is unable to display some of the User Forms.
Can any body help me for the same?
Thanks.
Archana.Hi Archana,
Are you using some special items in your form?
You say the form is not displayed, do you have a return error or exception when trying to open it in debug mode?
In Debug mode please pay attention to the VS.NET configuration, you have in Debug Menu -> Exceptions to configure all types of exception to throw into the debugger. Sometimes the COM exception are not thrown and your code just jumps after the error to the end of your method...
Have you tried to open the xml of your form with the ScreenPainter to see if everything is correct in there?
Hope it helps
Trinidad. -
People picker are not displaying all the users from the existing Synchronization Connections
Hello, I need help.
I have two domains, an old domain and a new domain that were are migrating to.
I have 2 connections for Users Synchronizations, one to the old domain and one to the new domain.
Here is what is happening: when I open people picker from any of the web applications only the users that existed in the old domain are showing and not the new users that are been added to the new domain. Basically people picker is displaying old data/users.
What can I do?The People Picker doesn't leverage UPA Sync Connections. Is there a one way or two way trust set up between the domains? If it is one way (where the old trusts the new), then you need to leverage the peoplepicker-searchadforests property: http://technet.microsoft.com/en-us/library/cc263460(v=office.12).aspx.
You also need to make sure your SharePoint servers have port access to the Domain Controllers in the new domain: https://peoplepicker.codeplex.com.
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
How odd. I've a somewhat complex bookmarks menu hierarchy, perhaps two dozen folders each containing between five and fifty bookmarks as well as a sub-folder or two. All of this is synced and displayed correctly with the bookmarks tab in the app, except for some of the more recent bookmarks that not organized into folders, and are floating inside the bookmarks menu. Of thirty or so, only five appear. Yet, when I search for them within the app they are found, including several bookmarks made today. These are bookmarks contained in the bookmarks menu but not in any particular folders. Clearly they are synced, yet the entire contents of the bookmarks menu are not displayed correctly in the app. Syncing otherwise seems swift. I've less than 600 bookmarks in total. I seek not to search for specific bookmarks but to browse my entire collection, so you can sense my frustration. I'd call this a bug. Any thoughts? Thanks!
No I didn't change anything deep beneath the hood. My problem didn't apply to the URL, but to the name of the link or bookmark header or whatever you would like to call it. (When hitting Ctrl + D there is a Name field). I only got ???????? instead of chinese characters in the name. Also for e.g. www.cntv.cn ...but maybe all China is not in the whitelist either. ;-) But anyway, this was not the real problem for me.
Apparently I was wrong as after a reboot of the computer it worked. The solution seemed to be to add Chinese to the language list. I don't know why it was not enough to restart Firefox?
Now I only have problems to show chinese characters in the name field of my external link manager... But I guess it is not an issue for Mozilla. -
Images are not displaying in the forms run time.
Hello All,
I am using forms 10.1.2.3.0 and database 11g in the windows XP platform.
I am not able to see the images in the buttons at the run time. I have done the following setup for the same but still I am not able to display images in the buttons. I have gone through all the previous threads for the same. Can any body suggest where I am doing the wrong?
1) Created one JAR file with the below command putting all the gif files in a folder (All the GIF files are in lower case). Kept this jar file in the forms/java folder. (When I am extracting the JAR file getting all the gif files and one more folder META-INF).
rem====
jar cvf icon.jar *.gif
rem=====
2) Modified the formsweb.cfg file as follows.
imageBase=codeBase
archive_jini=frmall_jinit.jar,icon.jar
3) In the buttons property Iconic = Yes and Iconicfile name = icon_print (gif file name).
4) Modified the Registry.dat file in the path "forms\java\oracle\forms\registry\Registry.dat" as follows.
default.icons.iconpath=forms/java
default.icons.iconextension=gif
Start the OC4J instance, and run the application, but still not able to see the images in the buttons. After I modified the regedit file I am able to see the images in the design time but not in the run time.
Any thing more needed to do the same. All the suggestions are welcome.
Thanks,
SUN
Edited by: User SUN@ on Nov 23, 2009 11:25 AMCreate a virtual directory icons in your /forms/server/forms.conf file
In the registry.dat file change
change
default.icons.iconpath=http://yourmachine:port/forms/icons/
Re: icons not displaying in oracle forms.
Re: Icon deploy issue in 10g forms
Re: cannot show icon images
Re: Step by step creation of iconic buttons
Maybe you are looking for
-
When I first got my iphone i plugged it into my friends computer and added songs from their itunes. Now when i plug it into my computer it will not connect or show up in the sidebar in itunes. I have already tried factory resetting the phone and 'aut
-
One script for multiple loaded movie clips
Hello, I am sure that this has been asked or answered before, but could not locate the correct response. Problem: There are 20 movie clips loaded onto the stage through actionscript. I have 20 different onPress scripts to start the drag for each (whi
-
Need help centering DIV in CSS
Hi- I had a "coming to jesus" last night regarding my website. I've been out of the professional web design world for about 7 years. I'm getting back in it. I used to design in tables and after some reading, I know I need to design in DIV. My pro
-
"Delayed Write Failed" - iTunes won't read iPod Classic
Having problems getting my fathers xmas present working (80gb Classic). I have re installed the latest version of itunes, my 30gb 5th gen iPod works fine, when connecting the Ipod classic i get a popup saying "Delayed Write Failed", saying 'failure o
-
We have a Http -> XI(3.0)-> Webservice scenario, where the webservice returns a SOAP response with one or more zip file as attachments. Any information on configuring SOAP adapter to receive the multiple attachments and pass it to outbound http inter