Portal Help Article search only works english

Hi!
I know there are similar questions and answers but none helped me so far :(
It's a new SCSM 2012 R2 install and all seems to be working.
BUT when changing display language in SCSM SSP from english to finnish the knowledge article search does not work.
I get this in the Portal server even log:
An exception was thrown while processing GetManagedEntitiesByManagedEntityTypesAndCriteriaWithInstanceQueryOptions for session ID .
Exception message: The creator of this fault did not specify a Reason.
Full Exception: System.ServiceModel.FaultException`1[Microsoft.EnterpriseManagement.Common.UnknownDatabaseException]: The creator of this fault did not specify a Reason. (Fault Detail is equal to Invalid locale ID was specified. Please verify that the locale
ID is correct and corresponding language resource has been installed.).
Data Access Layer rejected retry on SqlError:
Request: MT_Select_FullTextSearch_ca1410d8-6182-1531-092b-d2232f396bb8 -- (BlobJoin=True), (Status_BC4CF092_4309_1838_5E8F_C138367177060=761b8724-8307-8f26-3dc5-cf017922b603), (ObjectStatus_4AE3E5FE_BC03_1336_0A45_80BF58DEE57B0=47101e64-237f-12c8-e3f5-ec5a665412fb),
(FTLiteral0=%outlook%), (FTLiteral1=%outlook%), (FTLiteral2=%outlook%), (FTLiteral3=%outlook%), (FTLiteral4=%outlook%), (FTLiteral5=%outlook%)
Class: 16
Number: 7696
Message: Invalid locale ID was specified. Please verify that the locale ID is correct and corresponding language resource has been installed.

Hi,
and sorry for late response. I'm trying to user finnish language in the Portal.
In the meantime I've updated the SCSM to UR3 but no help... the same help article problem persists.
Help would be appreciated :)
More info on configuration:
- SCSM Datawarehouse Server (Windows 2012 R2)
- SCSM Management Server (Windows 2012 R2)
- SQL Server 2012 SP1 (Server 2012)
- And a separate server containing SSP and Sharepoint Foundation 2010
Okay, just tried adding swedish language pack to Sharepoint and Help Article search works also in Swedish but not Finnish. Could this be because SQL Server is missing Finnish support on Full Text Search?
Thanks,
Tommi
Answer: added stemmer and word breaker info from swedish to sql server registry for Finnish locale ID 1035 and updated languages in sql management studio.

Similar Messages

  • Robohelp8 Help Output Search not working

    Using WebHelp and WebHelp Pro as single source layouts.
    I open  the Help Guide. I enter a term in the upper right corner search box.  This causes the Search "Bar" to open along the left side. The search  term is filled in, but the search does not happen. I have to hit enter  again for the search to be performed.
    This only happens on the  initial opening of the Help Guide. When I toggle to Contents or Index  and search from the upper right corner again, the Search bar opens and  the search is performed with no issue.
    Issue happens in FF, IE,  Safari and Chrome on Mac and Win
    Any idea what may be causing  this?

    SOLVED

  • Workgroup Manager Find/Search only working for User ID

    Hello,
    I recently updated my OD Master from 10.6 to 10.7, running on an Xserve 3,1.
    The upgrade went fine and I have all my users and groups intact.
    However, in Workgroup Manager, when I search by "Name Contains" it will not do a search on the "Name" field.
    It appears that no matter what search method I choose, I can only search on the "Short Names" field.
    I still have another 10.6.8 Server with WGM on it and it does not have this issue, so it appears to be a specific issue with WGM for 10.7 (I have seen the same thing using WGM for 10.8)
    Any ideas?

    I noticed somewhat similar behavior a while ago - but my WGM window shows User Name (which is Name, not short name) and that can be searched by the last name, but not the first name.  As in a search using smith will find John Smith, but a search using john will not.  If the short name is jsmith, a search using jsmi will also work.
    However, using the Search button in the top tool bar will work with real names.  This picture doesn't actually prove that, but i did search on a first name and it did find it.  IE, a search of John in real names found John Smith.
    I think this is just how it is now.

  • Help Embeded flash only works locally.

    Please could someone help me. I am new to flash and have created my first flash video, a simple set of fading photos for my website front page.
    I am using Flash, Dreamweaver and Fireworks all CS3,
    The webpage can be found at http://www.wildennerdale.co.uk/index2.html
    The flash video can be found at http://www.wildennerdale.co.uk/flash/homepage%20image%20show.swf
    The flash video is embeded in the webpage and works fine in preview mode in Dreamweaver but does not appear at all in the uploaded webpage.
    The flash video works fine through the link on the webpage.
    I have uploaded the AC_RunActiveContent.js script to a scripts folder and to the folder where the webpage is and also the folder containing the flash video file.
    Please could anyone suggest what I am doing wrong or need t do extra.
    Many thanks
    Gareth

    A couple of things...
    1) case matters - "scripts" and "Scripts" will be different, so change either the folder name or the page code to agree with each other.  And you don't want to have the "../" leading it based on where I found the file.
    2) Don't use spaces in the names of any files you use in the web.

  • Accounts search not working for only the specific user

    Hi friends,
      We have configured E.P 7.0 with CRM 5.0 and configured  CRM PCUI business package.
    We have role called <b>accounts abd products</b> in portal. So accounts can be searched in this role.
    Now our severity issue is for one of the super user,for ex su1,  accounts search is not working in portal  but the same is working in CRM GUI.
    for example if we search for an account 233445(or any other account) in portal its showing no data found but if we search with the same criteria data is displaying CRM GUI.
    We have checked with other 2 super ids. Both ends portal and gui search is  working fine.
    Am unable to figure out whats the cause of the issue as search is not working only for one user su1 .
    we have checked by restarting the server also to clear the memory cache.But still search is not working in portal.
    Could anyone of u please advice ASAP as this is severity issue.
    Thanks & Regards
    Sireesha.

    Hello,
    Go in debugging in the query method of your MAC to see why the BP is not selected (or deleted) before going to the read method.
    Regards,
    Fred

  • AddressBook - why does Boolean search NOT work ?

    Actually I was very surprised to find out from a customer's problem that boolean search really doesn't work correctly with Apple's AddressBook App. ! Unbelievable but true - try it yourself. You can type letters just like "abc" to find everything which starts with abc (it is like searching "abc*"). But there seems to be no way to search for something which ends with "abc" or has it in the middle (not possible to sarch for "*abc" or "abc") ??? Did I miss anything or did somebody at Apple miss the point ? If yes please do something about it !

    You are correct. The search only works from the beginning of a word.
    However, this isn't the proper place to "ask" Apple to make a change to their software. This is a user supported forum and Apple employees do not normally read everything (or anything).
    Try the OS X feedback page at http://www.apple.com/macosx/feedback/

  • Help, search is only in english!

    I have bought an ipod in the USA but my music is all russian/ukrainian/belarussian/french and when I want to search for it, I cant find it because the search is in English. Of course I changed my language settings to russian but the only letters you can type into search are latin letters (abcde...) What do I do? I have about 17gb used, and cant find a single song I am looking for!!

    Hi Torben
    You will probably be getting a reply on this via the L1 support soon.
    I want to give You a short reply too.
    The package You are looking for is at least currently not availbe. You have until that time 2 options.
    1) Live with the english menues until the danish package become available. Then uninstall the english package and install the danish one instead.
    2) If You just don't want it in english, you might be lucky if You pick a package from another model - I looked at the recent Tecra M9. The package has version 1.0.18 (the package for your model is 1.0.25 I think). It probably works just fine but I cannot promise it.
    Another possibility that You might want to check is the ToolsCD directory on your HDD. That folder has the complete set of additional software on top of the OS that came with Your machine. Drivers, utilities and so on. I believe that you should have the TVAP-package there as well and in your preffered language.
    Good luck!
    Tom

  • Help! My iMessage doesn't work on my new iPhone 5s, I've changed my sim twice, but iMessage only works with my Apple ID.

    Recently got a new iPhone 5s and the iMessage doesn't work. I tried the sim in another phone and it didn't work either so I put a completely new sim in my iPhone and iMessage doesn't work. It will only work when I use my Apple ID for received messages. I don't know what to do. I have reset everything and it still doesn't work. My software is up to date. Please help!

    ACTIVATING FACETIME AND IMESSAGES
    Activating Facetime and Imessages on your phone requires the ability to send SMS messages and depending upon where you are that might be an international SMS.  Check with your carrier to see if your plan supports sending of international SMS messages.  If you are having trouble activating Facetime or Imessages turn them both off on your device and reset the device (Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for device to restart (no data will be lost)).  Wait for the device to restart and wait a minute and turn Facetime and imessage back on and wait for activation.  If that does not fix things read the following articles:
    http://support.apple.com/kb/TS4268
    http://support.apple.com/kb/ts3367

  • HT4623 my voice call services is not working with cellular network...only works fine with wifi..please help?

    my voice call services is not working with cellular network...only works fine with wifi..please help?

    Since you have already done some sort of reset on your Airport Express, you might as well make sure it was a "hard reset" - follow the instructions for a hard reset found at:
    http://docs.info.apple.com/article.html?artnum=108044
    Since your Mac is running Leopard, you need to configure the Airport Express using the Airport Utility found in the Applictions->Utilities folder. You cannot install the old software that was supplied on the CD you got with the Airport Express.
    In future - if you do something bad with network settings on your Mac, do NOT try to fix it with the Airport Utility. The Airport Utility is only used to configure the Airport Express - and since the problem you have created is on the Mac and not the Airport Express, there is no need to be using the Airport Utility and especially there is no need to be resetting the Airport Express.

  • Search not working Properly in Portal

    Hello Experts,
    we are using standard KM search iview for displaying custom search results in Portal,we have maintained Search Control set and Search option set properties of iview.
    We have created custom control set and option set in KM ,we also configured the indexing in index management.
    After this configutration search is working for documents which resides in 1 Folder of KM but with same configuration it is not working for the documents residing in 2nd folder.
    Any input ,help and suggestion are most welcome.
    Thanks & Regards,
    Siddharth

    Hello Siddharth,
    Check what is the the indexing status of the files in the second folder ? File --> Details --> View --> Index information. Ideally it should be indexing status okay.
    If the status is okay, then check for any filters in your search option set.
    If it is not okay, then check whether approval or any time based publishing is enabled in the folder. Or is there any special characters in the folder name which is preventing the files inside from getting indexed.
    Regards,
    Vinod

  • I updated Firefox, lost The Free Dictionary's some essential fucntions, cannot get them back. The TFD now only works in English. What to do?

    I updated Firefox to 10.0.2 and lost the functionality of The Free Dictionary. I reinstalled TFD, but now it only works in English. Say, I read a German webpage, highlight a word, the dictionary goes to look for it in the English dictionary. Before I had all the versions I needed, and the dictionary went automatically into the right one. And before I could have the toolbar installed, now there is no option for this either. What should I do?

    Hi Maurizio, I asked you about a problem with the free dictionary. I found the solution, which actually was not technical. In case someone else has the same, this is what I did not understand: When I highlight a word in a text in other language than English, the dictionary gives me an explanation in English, i.e. "word not found", but when I then press "search", the dictionary connects me into the appropriate dictionary. It functions even in Chinese! So, problem sorted out. The dictionary is not as good as before, but still, it works. Un saludo, Markku

  • Extra fields in search help window in Record working time EHP5

    Hi Experts,
    Can you please let me know how to add additional fields/select options in search help window for Record Working Time ?
    My system is EHP5 NW 7.02
    I have added the custom search help for the respective filed in table " TCATS_SHLP_ITS".
    I can see this table is having entry for only 4 selection options and 6 value fields for search help display.
    But in my custom search help programme is having 8 select options(for advance search) and 10 display fields on the search window. It's working from CAT2 transaction but when I am running through webdynpro timesheet, I can only get 4 select options and 6 value fields.
    Please let me know how to make the other fields available.
    Thanks in advance.
    Sonia

    Hi Siddharth,
    Thanks for your response. In that modify possible entries screen (Details view) I can see the search help is only having 4 select options and 6 display fields.
    So as per my understanding max 6 display fields/4 select options can only be displayed on search window.
    My requirement is to display more fields on search help OVS window.
    Can you please suggest.
    Thanks ,
    Sonia

  • Hello Experts Portal search not working

    Hello Experts,
    we are using standard KM search iview for displaying custom search results in Portal,we have maintained Search Control set and Search option set properties of iview.
    We have created custom control set and option set in KM ,we also configured the indexing in index management.
    After this configutration search is working for documents which resides in 1 Folder of KM but with same configuration it is not working for the documents residing in 2nd folder.
    Any input ,help and suggestion are most welcome.
    Thanks & Regards,
    Siddharth

    First check whether your TREX is working or not in System admin-> monitoring-> TREX monitor
    then check wheher all your documents are indexed properly or not.  for this check in Index monitor and check your index id.
    If it is not proper then try to reindex or reset failed index documents.
    If is is fine then check your search option set and search component set whether it is pointing to your index id or not.
    Then check your search iview.
    Raghu

  • Searching only English Wiki Pages

    Is it possible to search the wiki for only one language? (English in my case.) I mean, is it possible to exclude other languages from the results? I don't see the option in the "Advanced" search. I'm creating a shortcut, so maybe there's a way to specify in the url?

    No, it's not possible to search only English pages at the moment.
    By looking at the source of surfraw it doesn't seem to be able to help you.
    If you want, it should be very easy to program a search tool that gets raw search results through API calls (see https://www.mediawiki.org/wiki/API:Search, https://www.mediawiki.org/wiki/API:Opensearch, https://wiki.archlinux.org/api.php), and then removes the entries with the language suffixes listed in https://wiki.archlinux.org/index.php/He … #Languages.
    Finally, also the implementation of https://wiki.archlinux.org/index.php/He … uffixes.3F would solve this problem.

  • Macbook pro (15" - end 2011) battery life only works 3 hours - can you help me!!?

    Hi since i updated to Mountain Lion, my Macbook pro 15" (december 2011) only works for 3 hours instead of 5 hours with Lion.
    I've been waiting for 6 months now a release from Apple to fix this. Are you planning to do something for users like me?
    for reminder number of battery cycle as up to today = 131...
    Is there someone who can help me? or facing the same problem?
    Thank you

    Apple doesn't read the threads. File feedback is probably the best way to reach them. You won't get an answer.
    Feedback

Maybe you are looking for