Portal Installed - Slow iView creation etc
Hi,
We have just completed the installation of the production EP 7 (2004s) on a new blade server.
Config
4 Swap Drives of 5GB each
OS - 2003 Server standard edition SP1 on C Drive (12GB)
EP instance installed on a separate netapps drive (40GB)
*4GB RAM
In creating a simple new iView it takes 3-4 minutes.
What could be the reason? Is there a mechanism to improve performance?
In our previous portal implementation (EP 6) the iView creation etc is very fast. (with a hardware configuration inferior to the one specified above)
Any advice would be highly appreciated,
Thanks and Regards,
Antony.
Hi,
Nope actually, we are still encountering this problem. But there is a workaround. Say you have created an iview, you can copy such iview and change the relevant parameters later including the ID, name and all other particulars in order to create new iviews rather than creating new iviews altogether through the wizard.
The copying activity takes just a couple of seconds.
Hope this helps..
Antony.
P.S. : Reward points would be appreciated.
Similar Messages
-
When creating a new iView in the Content Administration -> Portal Content tab, going from step1 (source type) to step2 (page creation) is very slow. The time to load the step2 page can easily run 30 minutes or more. Normally this occurs on the first time creating an iView after entering the Portal Content tab.
Any ideas on how to speed this up?Hello,
did you find any solution to this problem? Since a few days, we experience the same. I think it has something to do with LDAP, since the only change that happened in the last days is that we "portal-enabled" around 2500 users in our active directory.
I would really appreciate any help with this issue... Thanks!
Regards,
Markus -
PAR file missing in PAR selection list during iView creation
Hi Gurus
I created a jsp file and exported it through NWDS export option. But i dont get this par while iView creation. Its present when i searched in the support desk . Can anybody tell me the steps how to create a simple jsp in NWDS and test the same in Potal as iViews.
Thanks in advanceHi,
Use NWDS wizards:
1) File -> Mew Project -> Portal Application -> Create a Portal Application Project
2) Right click on the project you created -> New -> Other -> Portal Application Project -> Create a new Portal Application Object
3) Select Portal Component -> JSPDynPage
4) Write your code ...
5) Deploy the par file & create iview from it.
Omri -
WD Java iView Creation Question/Issue - CE 7.1 EHP 1 Trial
Hi all,
Im posting this question here seeing as that the issue has arrised on an installation of the AS JAVA and EP shipped with CE 7.1 EHP1 Trial.
When attempting to create an iView for a deployed custom WD Java app on the trial Portal I am taken straight to the iView template selection without being given the options for iView creation( ie. create from template, portal component or WD Java app). Is this by design ( WD Java iView creation has changed from previous Portal versions or is limited in Trial installation), is this an issue with the components shipped with the Trial or an issue on my installation only?
Currently my only solution for deploying WD java content is to copy the actual application and paste it as Portal content which then creates a WD Proxy page with a single WD Proxy iView (that of the copy pasted WD app). This is fine for single app scenarios but becomes an issue with multiple apps on one page and drag and relate scenarios.
Kind regards,
Willem.Hi Williem
Please check the SAP CE 7.1 EHP1 documentation for more information.
[CE 7.1 documentation|http://help.sap.com/saphelp_nwce711/helpdata/en/44/d958673ef05f4de10000000a11466f/frameset.htm]
[CE 7.1 iViews |http://help.sap.com/saphelp_nwce711/helpdata/en/f5/eb51590e6a11d7b84900047582c9f7/frameset.htm]
Hope this will helps you.
Thanks
Arun Jaiswal -
How to use Application Integrator for iView Creation
Hi all
any one can help me how to create an iView(webshop b2b iview) by using the Application integrator in portal
Regards
sunil1) creating URL ivew , for that you can refer this
URL iView Creation
2) You can directly deploy your .net project from the Visual Studio itself(sound's amazing right!!). SAP have provided a add-on to deploy directly from VS 2003/2005.
For that you need
SAP Portal Add-in 2.5 for Visual Studio 2005 - Hotfix 1.exe
SAP Portal Runtime 2.5 for Microsoft .NET - Hotfix 1.exe -
Applying Strong Encryption after portal install
How do you apply strong encyryption after the portal install? I am sure I have seen in an installation guilde.
I am using IBM AIX. I downloaded the two encryption file sets:
SAP Cryptographic Library IBM AIX for RS6000/Power
SAP JAVA CryptoToolkit (J2EE Engine as of Release 6.30)
I am using EP6 SP11.
The CryptoToolkit contains a SDA file that I use SDM to install but I do not know what to do with the file in the Cryptographic Library.
Can anyone help?
Thanks
PatrickHi Patrick,
the "SAP Cryptographic Library" is the crypto code for ABAP servers. The "SAP Java Cryptographic Toolkit" is the one you need for SAP J2EE Engine (WebAS Java).
To be able to use any Java crypto toolkit ("JCE provider") without restrictions regarding key size etc., you need to replace the default "JCE policy files" shipped with the JDK by the "JCE policy files for unlimited strength encryption" from your JDK provider.
As you can see in SAP note 796540, for IBM JDK, you can download the files (after registration) from https://www6.software.ibm.com/dl/jcesdk/jcesdk-p
Best regards
Heiko -
Iview creation for existing tranxns.
Hi All,
Very basic question for all you portal developers,but I being a functional analyst would like to know more abour iviews.
What is creating an iview for existing screens and transaction in portal mean.Please explain giving some examples or links.
What is the use or functionality of iviews.
Thank you in advance for ypur time.
Regards,
ASA.iView: (Integrated View)
iView is a single piece of informationfetched from different sources e.g R/3.
These information content ie iView can be integrated in Enterprise poral made
visible to users.
There are some iView templates available which are provided by sap.
Each iView template is used for displaying information from various sources for example URL iView is used to display any websites in the portal. and SAP Transacation iView is used to run sap transations.
Its possible to display(integrate) any SAP transaction in portal interms of SAP Transaction iView.
To do this u need to create a system (in Systenm admin -> system config -> system landscape-> create -> new system) which is used to make connection with R/3 system from poral side. Normaly system contains server ip, user name , client details etc.
Create a iView in content Admin -> portal conmtent -> Create -> iView -> select iView type as SAP Transaction iView. assign ur Tcode and created system name here..
save & Preview
Assign iView to user
Ram -
ORA-06510 error in portal install
The portal install fails at 50% and the following is from the
portal install.log:
ORA-06510: PL/SQL: unhandled user-defined exception
Errors encountered in the Install process. Installation Aborted.I also have this problem. Portal configuration/installation crashes at
about 50%.
Maybe it is because my installation lasted more than 2 hours as it
is said in installation program. But on the other hand, I also get no-
data-found error and therefore this should not happen because of
some kind of timeout. Because of this no-data-found I get core
dump in database.
Technical details:
I am using Oracle9i 9.0.1 DB on SuSE Linux 7.2.
DB alert log contains:
ORA-07445: exception encountered: core dump [kzrtevw()+323]
[SIGSERV] Address not mapped to object [0x4] [] []
ORA-06510: PL/SQL: unhandled user-defined exception
ORA-06512: at "PORTAL30.WWSEC_API", line 433
ORA-01403: no data found
Trace file contains current SQL statement:
INSERT INTO WWSEC_MEMBER$ ...
How can NO_DATA_FOUND happen on INSERT?
Portal configuration assistant log file shows that error happened in
step 14: installing seed data for all layers and it ends with error
ORA-03113: end-of-file on communication channel (standard client
error when core dump occurs).
Any ideas how to solve this problem?
Aldis -
Enterprise Portal 6.0 - Iviews not refreshing.
We are using Single Sign On using logon tickets with EP 6.0. This had
been working fine until a couple of weeks ago when Microsoft patch MS06-067 was applied. This is an Internet Explorer patch applying Active X
controls.
Now, when we launch the portal, the welcome iview appears but we cannot
navigate to any of the other ivews - they all show the welcome iview.
If we access the server with the :50000 address, forcing logon to the
portal, the ivews all work fine.
Have anyone encountered any problems with this patch? and can you me any pointers on how to solve this issue.
Thx.Hi
I think you should visit this link. This will definately help you. This contains the configurational steps as well as the details about the ESS configuration.
1) https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/21eb036a-0a01-0010-25a3-b2224432640a
2) Configuring The Business Package For Employee Self Service (ESS)-mySAP ERP 2004
I hope this should solve your problem.
Thanks & regards
Arun Singh -
Problem in developing a Portal Activity Report iView
I have developed a Portal Activity Report iView and assigned some iviews to the "Specify Report Content" option! I am supposed to get the user information but instead, I see the message "No content available for the specified period".
Am I missing anything?
Can someone help me out in this regard!!!Keep in mind that the Portal Activity Reporting functionality only collects user information from hits to <b>pages</b> that have the <b>Monitor Users</b> property set to true. You can monitor the number of hits to an iView, but cannot collect user information about those hits. If you need this kind of information for an iView, I would recommend adding the iView to a page and then collecting the activity reporting information you need from the <i>page</i> hits.
See <a href="http://help.sap.com/saphelp_nw04/helpdata/en/58/7e234239f75733e10000000a155106/frameset.htm">Configuring iViews/Pages for Data Collection</a> for more information.
Hope this helps,
Fallon -
Hi,
Pls confirm if you are using Windows 2000 Pro, in this O/S the
hostname is the name of the computer itself. Check the
MyComputer->Properties->Network Identification->Properties, the name you
find under the computer name will be automatically taken while
installation, if it doesn't then there is some error. However the
C:\Winnt\System32\Drivers\Etc\hosts doesn't matter much while installing
iAS 6.0 SP1 or above. Hope this helps
Regards
Raj
Hazel Seow wrote:
Do I need to provide the physcial hostname to iAS during installation
or can I just that installed name into the /etc/hosts file?
Try our New Web Based Forum at http://softwareforum.sun.com
Includes Access to our Product Knowledge Base! -
How to pass parameters from GP to Portal-page or iView
Hello all,
I tried various things but I'm not succesfull in creating an callable object of type 'Portal-page or iView' which receives certain parameters.
Currently we open the portal page from within a WebDynpro. I pass a string "zaanum=909&zasnum=1" to the Portal-page. The parameters are received in the webDynpro-app.
Now I want to do this from within GP. I thought to create a CO of type 'portal-page or iview' and the parameters are given to that CO.
I expect the parameters to be received by the WebDynpro in the iView.
I tried:
- defining one parameter for CO of type string. At initiation time I fill this with "zaanum=909&zasnum=1" ==> Nothing received in iView/WebDynpro
- defining two parameters (technical names 'zaanum' and 'zasnum') for CO of type string. At initiation time I fill them with 909 and 1 ==> Nothing received
- defining two parameters (technical names 'zaanum' and 'zasnum') for CO of type integer. At initiation time I fill them with 909 and 1 ==> Nothing received
- defining two parameters (parameter names 'zaanum' and 'zasnum') for CO of type string. At initiation time I fill them with 909 and 1 ==> Nothing received
Any help is appreciated!
Maarten Rutten
Edited by: Maarten Rutten on Jan 9, 2008 8:36 PM
Edited by: Maarten Rutten on Jan 9, 2008 8:37 PMHi Ramien,
I have a similar problem. I need to pass values from webdynpro to jsp and vice versa. Kindly let me know how you solved this problem.
Thanks & regards,
Amrita -
An error has occured while updating software. Connecting to the server is slow and games etc only run for 60 seconds
Have you tried resetting your iPad? You may have to restore again if there was a problem.
Try the reset first.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. -
I have just purchased the latest macbook pro 13 retina (late 2013). I want to connect to a Dell U2713H Monitor. As the new macbook doesn't have a cd slot, I am unable to install the monitor drivers etc. Where can I download the drivers?
Thanks for your prompt reply. I'm not sure how to connect to the monitor as the only ports available on this model mac are Thunderbolt. The mini display to display cable supplied doesn't seem to work out of the TB port. Do I need to use a Thunderbolt cable + an adaptor?
-
How to View Smart Forms in Portal Using Url Iview?
I am trying to view a smart form in the portal using url iview but not able to define proper url address. can any one help me out with relevant example?
Hi,
Go through Re: Web Dynpro and Smart Forms.
Regards,
Satyajit.
Maybe you are looking for
-
I am unable to send emails through yahoo on my ipad 4 wifi, just starting over the weekend. My 3 other non-yahoo email accounts are working fine on my ipad. When I try to send an email from the yahoo account, I receive the message that the connection
-
SOAP adapter: WSDL issue
Hi Experts, I am working on File-XI-->Mail scenrio using SOAP adapter. My file contains only one line fields say: TATA 407 I have configered File adapter perfectly and CC of it is showing perferctly green (Data is coming in MONI). On the counter SOAP
-
canu send me an update of iOS 5.0.1 because no games or music and videos work
-
what is the pre requisite for table maintenance generator
-
how do i rotate the image in draw