Portal_logger from EP6 SP2

Hi,
I used to watch the logger called portal_logger in EP6 SP2, but with the new log viewer I cannot find the same view. What is it called in NW04 ?
BRGDS
Henrik

Hi,
Logging console is now under visual administrator. Login to visual admin and under the Server node > Services click
on Log Configurator. Here you can set all the log levels.
Cheers!!

Similar Messages

Export/import content from EP6 into NW04

We are upgrading from SRM3.0/EP6 SP2 (source) to SRM5.0/Portal NW2004s (target).
The only thing we need to preserve from the source portal are the users and roles. We plan to re-apply the business package for SRM 5.0 after the migration is completed. We are not using any Collaboration Rooms.
I know there is a migration path from EP6 SP2->EP6 SP9(NW04), followed by an upgrade from NW04->NW04s.
My question is:
- is it possible to export content from EP6SP2 and import it into NW04/MW04s? this will eliminate the complicated migration path from EP6 SP2 to NW04.

Hi,
As long as you only need to transport PCD content, I would recommend using normal PCD transport (just did an upgrade from EP6 SP2 to NW04 SP13 and used normal PCD transport without any problems. Will do the same for another upgrade to NW04s). Only if you have KM content you are forced to use the migration tools.
I am not quite sure about users and role migration since I've only use LDAP as a user store (we manually repeated the AD group to portal role mapping since there were very few)
There was a conf call on this, but the only reference I can find now is https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/supplemental_docs/prtl204.pdf
Dagfinn

Error in DB migration : EP6 SP2 NW SR1.

Hello All,
I am doing migration from EP6 SP2 > NW SR1.
While doing the DB migration on the Target server, I encountered the below error:
============================================================
1118066281203#INFO.- Reports button clicked at MainMigrationFrame
1118066281203#INFO.- SAP System Name is SR1
1118066281203#INFO.- using tool version 0409.0.20050405174947.0000/877
1118066281203#INFO.- using system installation at d:\usr\sap\SR1
1118066281218#INFO.- Processing migration info
1118066309031#INFO.- Processing migration info finished
1118066315531#INFO.- ETC Migration button clicked at MainMigrationFrame
1118066318062#INFO.- DBMigration button clicked at MainMigrationFrame
1118066327500#INFO.- starting db migration run ...
1118066327500#INFO.- jdbc driver: com.sap.portals.jdbc.sqlserver.SQLServerDriver
1118066327515#INFO.- jdbc driver url: jdbc:sap:sqlserver://10.34.137.16:1433;MaxPooledStatements=100;DatabaseName=WCM;SelectMethod=cursor;longDataCacheSize=524288
1118066327515#INFO.- using database schema 'WCM' on host '10.34.137.16' at port '1433' with user 'SAPWCM' as the database source
1118066343546#INFO.- retrieved drv name: SQLServer (version: 3.2.006922003414004423)
1118066343578#INFO.- MSSQL lock timeout adjusted
1118066343609#INFO.- src cur ver: SP2.CM.1
1118066343609#INFO.- src db version is SP2.CM.1 (17 patches newer than SP2CP.UWL.1)
1118066343609#INFO.- running EP6SP2 -> NW04 migration
1118066343625#INFO.- starting backup of configuration ...
1118066347203#ERROR.- null - ConfigException: error while exporting CMS configuration to folder [D:\MIgration\KMCMIGTOOL_5\migrationTool\.\work\export]
     Inner exception is:
     A problem occurred while exporting the configuration: java.lang.NullPointerException
stack:
     error while exporting CMS configuration to folder [D:\MIgration\KMCMIGTOOL_5\migrationTool\.\work\export]
     Inner Stack is:
     java.lang.Exception: A problem occurred while exporting the configuration: java.lang.NullPointerException
          at com.sap.netweaver.config.offlinetool.ConfigurationCmsTool.exportConfiguration(ConfigurationCmsTool.java:111)
          at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
          at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
          at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
          at java.lang.reflect.Method.invoke(Method.java:324)
          at com.sap.netweaver.bc.migration.ui.Migrator.backupCfg(Migrator.java:186)
          at com.sap.netweaver.bc.migration.ui.Migrator.run(Migrator.java:414)
1118066347203#ERROR.- no valid configuration backup - rejecting db migration
=====================================================
Any help is highly appreciated.
Warm Regards
Suneel Razdan

Hello
I have resolved it !!!
That's usually caused by the database not containing a valid config framework tree. In all cases so far this happened as part of the user killing the java vm in a situation where one should have waited for the cancel button to return.
I restored the target database with the backup
taken before started the migration and rerun the tool on
the target. You can continue to use the MigrationInput.zip file.
Suneel

SSO fails from EP6 to R/3 4.6C

Hi,
I am trying to replace a Workplace 2.11 system (and standalone ITS 6.10) with Enterprise Portal 6.0 Web AS 6.40 system (and standalone ITS 6.20).
The R/3 backend is 4.6C.
I've performed th following steps:
- installed and patched the Portal and ITS
- upgraded the WP-PI in R/3 4.6C system to 600_46C
- downloaded the verify.der file from the Portal and imported it into the R/3 backend, adding it to the PSE and ACL
- added ~mysapcomusesso2cookie = 1 to global.srvc file and restarted ITS
- implemented SSO from EP6 using SAPLOGONTICKET (using FQDN for all servers)
However, I am getting the errors below in the R/3 dev trace file for the work process.
I have checked table TWPSSO2ACL which had a valid entry for DMO client 000 (Portal system), and output from transactions PSEMAINT and SSO2 look OK.
RZ10 SSO parameters were already set:
- login/accept_sso2_ticket = 1
- login/create_sso2_ticket = 2
Y Thu Feb 15 15:23:53 2007
Y *** ERROR => multiple DiagSetGuiConnectData call [diagext.c    584]
N *** ERROR => dy_set_sso_ticket: client="" (will NOT be defaulted)! [sign.c       9076]
N conv_lang_iso2sap : no conversion necessary
N dy_set_sso_ticket: SSO logon data stored
N syssigni: SSO logon data retrieved
N dy_signi_ext: SSO TICKET logon (client    )
N mySAPUnwrapCookie was called.
N RunningCompatibly said: I'm >= 46C.
N mySAP: Got the following SSF Params:
N         DN     =CN=WPP, OU=<.....>, OU=<.....>, O=mySAP.com Workplace, C=DE
N         EncrAlg=DES-CBC
N         Format =PKCS7
N         Toolkit =
N         HashAlg =SHA1
N         Profile =/usr/sap/SP2/DVEBMGS91/sec/SAPSYS.pse
N         PAB =/usr/sap/SP2/DVEBMGS91/sec/SAPSYS.pse
N Got the codepage 1100.
N Got ticket (head) AjExMDAgABFwb3J0YWw6SjJFRV9BRE1JTogAE2Jh. Length = 476.
N Got content client = 000.
N Got content sysid = DMO     .
N *** ERROR => No entry in TWPSSO2ACL for SYS DMO      and CLI 000. [ssoxxkrn.c   1101]
N *** ERROR => CheckSubject failed. [ssoxxkrn.c   501]
N dy_signi_ext: issuer not trusted
Any advice would be appreciated.
Thanks,
Sharyn

Hi Sharyn,
There is a lot of confusion regarding use of EP60 with R/3 4.6C
Your thread seems to indicate that you have successfully installed EP60 with R/3 4.6C using ITS 6.2 and Web AS 6.40 Is that correct?
We intend to go for the same architecture. Can you please tell me if there is a guide(document) on setting this up? Also, where can i find the above software components to install? I don't find the SDC on marketplace very intutive (especially for old releases).
Thanks and regards,
Zubair

Upgrade from EP6.0SP2 to Netweaver 04

Hi,
Currently we have EP6.0Sp2 Patch3 installed and running. Recently we have got Netweaver 04. Kindly let me know what is the procedure for upgrading from EP6.0SP2 to Netwearver 04. DO we need to build a new system? or can old system be upgraded.
Thanks,
Maya.

Hi Maya,
in addtion To Dagfinn, some details:
- The migration tools are planned for Q1/2005. See /thread/25021 [original link is broken] where it is said they are planned for 2005-02-16, but I don't know how official this is.
- For WAS migration, there is a forum, with one thread at the moment, saying "J2EE Migration Kit available!!!", with one answer ("Where?"), with no reply... See SAP NetWeaver Application Server
- Anyhow, there are different SAP notes concerning migration issues, in detail:
Note 804876 for a KMC issue
Note 778977 for a PCD issue
And last but not least: The "EP 6 SP2 Migration to NW04 (EP6 SR1) Troubleshooting Guide": http://service.sap.com/~sapidb/012003146900000023012005E/Migration_Troubleshooting_Guide.htm
Hope it helps
Detlev

EP6 SP2 hardware key / installation number

Hi all,
unfortunately the license of an EP6 SP2 has expired and I need to find out what are the hardware key and the installation number of this portal in order to renew the license.
As the admin pwd is lost and the sap* user/pwd combination do not work in order to log on to the portal and retrieve the system information via the system admin tab I am wondering if I can find both (hardware key and inst. no.) in the database or on the filesystem. If yes, where??
Any input on this would be greatly appreciated :)!
Thanks alot in advance!
BR Helga

Hi Helga,
One way to enable SAP* is
1. Copy your current sapum.properties.bak to sapum.properties (/usr/sap/XXX/j2ee/cluster/ume)
[ This would only work if this is the original sapum.properties when you initially installed.]
If you copy over the properties from the direct editing
(i.e sapum.properties is in sync with the properties in
the database )tab then set the following properties in the sapum.properties is set.
ume.superadmin.activated=true
2. Restart the server.
Side Effect: You have to redo the UM configuration
Now you can logon as SAP* and get the system information.
Alternative 1:( This may or may not work. I don't have access to the environment or documentation to check out.)
Through Visual Administrator see server license information.
To Access the Admin documentation by the following URL;
http://your portal server:50000/index.html
Hope this helps
Regards
-Venkat Malempati
Message was edited by: Venkat Malempati
Message was edited by: Venkat Malempati

KM feature difference between Netweaver and EP6 SP2.

Folks,
I need to come up with advantages of upgrading our EP6 SP2 ) environment to Netweaver stack. . I have heard a lot about it. I now need to document this.
Now I want to make a solid case of this to my Management and get their buy in.
Where can I find information where I can get a comparison primarily from a KM standpoint, and overall portal feature set.
Based on this I have to come with a ROI model that will help us migrate to Netweaver stack.
Any help would be appreciated. And I promise to return and reward the answers. thanx rj.

Pretty much everything is explained in here:
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/706005a3-3bd6-2910-91ae-a2016239bdcf">SAP NetWeaver Process Integration 7.1 Overview of New Capabilities</a>
I think there's a weblog with a concise list somewhere, but I dont have the link saved.
Hope that helps.
James.

Webdynpro and EP6 SP2

Hi
Can you use webdynpro applications with EP6 SP2 Patch 27 and above. This is running on J2EE 6.20
Thanks
Darrell

Hi,
It depends on what are you mean by "running"
You can take WAS 6.40 ,deploy WD app on it, define this WAS 6.40 server on your EP6 SP2 SLD and then make an WD iView in you portal which will consume WD application from WAS 6.40. This means that all "buisness logic" would be performed on WAS 6.40 and you portal will only "view" the application. However you can use portal APIs (like Client Side Eventing) in this scenario.
On the other side you don't have a WD runtime on WAS 6.20, so you can't deploy WD application on WAS 6.20
Hope it hepls.
Victor.

Portal Upgrade from EP6.0sp10 to EP6.0sp18

Hi All,
I am totally new to portal upgrade.we have current version of portal as follows:
portal version is: 6.0.10.2.0
KMC version is : 6.0.10.1.0 (NW04 SPS10 Patch 1)
Trex Version : 6.1.10.01
1. I am little confuse about whats the difference between Upgrading from EP6.0sp10 to "<b>EP6.0sp18/ NW04sp18</b>".Is the process for doing above is same or different.
2. I heard from SAP that TREX must be upgraded first before KMC and Portal.Is it true? whats is reason for that
?what should be latest SP and patch for TREX?any documents?
3. Is there any specific sequence to upgrade like TREX->WAS>portal>KMC?
4. What about customisations objects,will that be seriously affected after upgrade?How to prevent that?
can anybody give the Basic knowledge of upgrade and process flow.
Thanks in Advance.Help will be greatly appreciated.
Amit

Hi Amit,
EP6 SP18 ist the actual Service Pack for Enterprise Portal. NW04 SPS(!) 18 is the complete Service Pack Stack for the NetWeaver platform. So if you want SP18 for your portal installation, you should get the whole NetWeaver platform in use for that to SPS18 (as you wrote, for EP this is normally WAS, EP, KM, TREX, eventually NWDS).
TREX normally has the same counting as the rest, but in fact at the moment there is no SP18 for TREX, but it is renumbered again. The actual version reads TREX 6.1 Patch 26.
Sequence is WAS -> portal -> KMC -> TREX. Anyhow, you should not await a stable version if using mixed SPs, especially if mixing 10 with 18 So get all in line and then restart working with your installation.
As you normally shouldn't have customized standard objects but copied them into your own namespace and worked on these, there shouldn't be a problem. If you haven't gone this way, with such an update you will learn how urgent it is to keep this in mind --- never change standard objects...
Hope it helps
Detlev

License in Failover/Backup Portal - Ep6 SP2

Hello,
We run EP6 SP2 and we copy the database and portal server file system to different hardware as a diaster recovery method. We we bring up the portal on this new server it loads fine, but it says that it is not licensed since the Hardware key is different.
Does anyone know if I can import a license on the current server with the hardware key of the DR Server so that it will be licensed when you start it?
Any ideas / suggestions?
Thanks,
Keith

Keith,
Kindly check note 181543 (License key for high-availability environment).
Regards,
James

Unable to connect to BW3.5(IDES) from EP6.0

Hi All,
I am trying to establish connection to our BW system (IDES, BW3.5 NW04) from EP6.0.9. I have done the following as per procedure.
- Creating BW system
- Setting Usermgmt (UIDPW and admin, user)
- User mapping also done
Connection tests for connector works fine but fails for WAS.
Test Details:
The test consists of the following steps:
1. Check that the system object defines an SAP system
2. Validate the following parameters: wap.WAS.protocol; wap.WAS.hostname
3. Check the HTTP/S connection to the defined backend application
Results
1. The system object represents an SAP system.
2. The following parameters are valid: wap.WAS.protocol (http) ; wap.WAS.hostname
(bwserver.<xxx>.com:8001)
3. HTTP/S connection failed. Make sure the protocol, host name, and user mapping are correctly defined.
P.S: I have verified the WAS hostname and port from the 'sicm' tcode.
WAS PATH: /sap/bw/bex
Can someone please tell me where it went wrong?
Thanks
Sathish

Hi Sathish
when u perform WAS Connection test than it's perform both
http and http/s connection to WAS it's only give u that
HTTP/S connection failed. Make sure the protocol, host name, and user mapping are correctly defined
becoz u did not use HTTPS protocol for WAS
don't worry about that. if the connection test perform HTTP/S connection than it's always failed. ( u don't use HTTPS protocol for WAS)
further look at following.
http://help.sap.com/saphelp_nw04/helpdata/en/aa/a11a39391f4f11b54e33bc92476686/frameset.htm
regards,
kaushal

Enhancements made in EP6 SP2 patches 28 & 29.

What are the enhancements made in EP6 SP2 patches 28 & 29.
What I mean to say is that what are the new features added in Patches 28 & 29. here I exclude Bug fixes.
I can go to the central note for patch 28 : 793582 and can get a list of notes which indicate bug fixes done in Patch 28
Similar way, I can go to the central note for patch 29 : 803871 and can get a list of notes which indicate bug fixes done in Patch 29
What I am really concerned is regarding new features added in these two patches (Patch 28 & 29) separately.
Are there any new features added in these two Patch releases. If yes, Where are they documented.
Are they documented separately or their respective guides are updated.
Your help is really appreciated.

Hi Robert, hi Suneel,
> Patch 28 & 29 are not listed there yet.
Not quite right, Robert, I don't know what a dreadfully old version you have looked on... It is listed, but it is explicitely said that both patches, 28 & 29, have
"no new features or enhancements to existing functionality. It is cumulative as of Patch 5. Please refer to Patch 5 and Patch 27 documentation for information about previous enhancements."
The document is retrievable without access to service.sap.com: http://help.sap.com/download/documentation/netweaver/ep/FeaturesEP6SP2Patches_v2.5.pdf
It's a pity that SAP publishes the version name within the link, so if a new version exists, one has to know (or to look via service.sap.com).
Hope it helps
Detlev
PS: Suneel, please consider rewarding points for people like Robert Thanks in advance

Integrate CRM 4.0 and EP6 SP2

Hi,
Can anyone let me know the steps to integrate CRM 4.0 with EP6 SP2 on windows 2003 server.
Thanks in advance,
regards,
Payal

Payal,
There is excellant documentation available at SAP Help site on this. Here is the top level link for SSO
http://help.sap.com/saphelp_nw04/helpdata/en/89/6eb8deaf2f11d5993700508b6b8b11/frameset.htm
and here is a link to most common scenario
http://help.sap.com/saphelp_nw04/helpdata/en/89/6eb8e7af2f11d5993700508b6b8b11/content.htm
Antoher thing it would be good to have access to BASIS skills while doing SSO to SAP Systems.
Cheers
Pankaj

Repointing "Help" link to a different source in EP6 SP2

Hi all,
I am using EP6 SP2 Patch 4 HF 7. I need to re-point the "Help" link in the top of EP6 SP2 to an different source. Presently it is pointing to http://help.sap.com and since mine is an intranet portal..cannot point to that.
Any idea where do I have to change the link ?
Regards,
Rajan.K

Hi!
You can customize this link by editing:
Content Administration - Portal Content - Portal Content - Portal Users - Standart Portal Users - Default Framework Page.
In popup menu choose "Edit". Select "Masthead iView" and press "Edit" link. Then in "Property Category" choose "Navigation" and in "Help Link URL" enter link you preffer.
WBR, Lnk.

Export Customized Information Attributes from EP6 to EP7

Hi Everyone,
Is it possible to migrate User Admin customized information fields from EP6 SP17 to 7 EhP1 SP7? The standard portal user export functionality only collects the standard fields and ignores the custom attributes.
Does anyone have an idea on how this task can be achieved???
Thanks,
Bim.

No longer a requirement, thanks.

Portal_logger from EP6 SP2

Similar Messages

Maybe you are looking for