Portal login failed due to Desktop error

Hi all
we are using EP 7.0.
Accidently we made a wrong entry in the master rule for portal desktop.The entry is defined for "*" (that means for all users).
Now nobody can log into portal.
How am i suppose to correct that entry?Is there any way to do it using Visual Administrator?
very urgent
Thanks in advance
regards
shankar

Hi Steffi,
Issue is resolved.
I didn't deleted any entries in the master rule.
To access Content admin using below direct 1st URL, once you logon into the url and then enter second url and modify the master rule.
http://portal:port/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fadministrator!2fsuper_admin!2fsuper_admin_role!2fcom.sap.portal.content_administration!2fcom.sap.portal.content_admin_ws!2fcom.sap.portal.portal_content
Access System admin using below direct URL to access Master Rule Collection to fix the wrong rules.
http://portal:port/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fadministrator!2fsuper_admin!2fsuper_admin_role!2fcom.sap.portal.system_administration!2fcom.sap.portal.system_admin_ws!2fcom.sap.portal.system_configuration!2fcom.sap.portal.portal.display!2fcom.sap.portal.wd_portalDisplayRules
Thank you for your support!!
Thanks,
Naveen

Similar Messages

Time Machine restore of File Vault encrypted user failed: Login failed due to an error.

Hello everyone,
I did regular time machine backups of a File Vault (version one) encrypted user folder. Now I needed to restore a few files that have been deleted unintentionally. Since single files can't be restored from a File Vault encrypted backup time machine told me that I must restore a complete backup from a certain time. I did that. Time machine quited to copy at about 25 percent and rebooted. Everything was looking good until I entered my password for the recovered user. Then I got the answer:
"Logging in to the account failed because an error occurred"
And now?
I tried to restore some other backups, none was working. I copied the relevant .sparsebundle file out of the backup folders and tried to mount it. Didn't work. It says "not recognized". Then changed it's owner to root and tried again, the same answer. I tried to repair it by using hdiutil but it also says "attach failed - not recognized".
Apple, I am asking you: Are my data lost?
Anyone, please provide help.
(Apple, it's more than a shame what you are providing for the safety of a user's data!)

Try Repairing the backups, per #A5 in Time Machine - Troubleshooting.
If/when you get this sorted out, strongly consider switching to File Vault 2. It works much better, especially with Time Machine.
Or, if possible, only encrypting a few sensitive items, per Protecting confidential documents in a secure disk image.
Message was edited by: Pondini

Error: 1051293: Login fails due to invalid login credentials

Need help!
I searched all the threads for this but i still have not found one that works for my issue.
I was trying to add a new essbase server using EAS and i been getting the following error.
I am able to login into the EAS with the same user name and password, but i am getting the following error when i try to ADD essbase server.
admin July 7, 2010 12:40:32 AM CDT com.essbase.eas.admin.defs.AdminCommands.AddServerToUserList Succeeded
winserver com.essbase.eas.essbase.defs.ServerCommands.Connect July 7, 2010 12:40:33 AM CDT Failed : 1051293 Login fails due to invalid login credentials
Error: 1051293 Login fails due to invalid login credentials
Essbase Server: winserver com.essbase.eas.essbase.defs.ServerCommands.Connect July 7, 2010 12:40:33 AM CDT
Error: 1051293: Login fails due to invalid login credentials
HELP!!
Alex

You have already posted the question here :- Error: 1051293: Login fails due to invalid login credentials
Cheers
John
http://john-goodwin.blogspot.com/

Cannot connect to olap service. Cannot connect to Essbase Server. Error:Essbase Error(1051293): Login fails due to invalid login credentials

Hello All,
I am getting following error, when trying to expand essbase from calculation manager, "Cannot connect to olap service. Cannot connect to Essbase Server. Error:Essbase Error(1051293): Login fails due to invalid login credentials",
I am using EPM 11.1.2.1
Thanks
Yash

If you have moved the server to a new data center and an issue has started occurring then it could point to the change.
Are you able to log into essbase directly with Maxl using the same account?
If you run a registry report do you see any of the configuration with IPs instead of DNS/hostname
Cheers
John
http://john-goodwin.blogspot.com/

Backup to remote stage failed due to RFC error

Hello!
Recently I have problem to execute a successful online Backup to the external source.
If I start backup from DB13 and analyse the work processes (Tcode SM50) I found the following:
The responsible BGD-WP:
status: On hold , reason: RFC, report: SAPLSSXP
The dev_w8 trace retrieves the following error:
Source RSCROSS10 Line 112.
Error Code DBIF_RSQL_SQL_ERROR.
Module $Id: //bas/700_REL/src/krn/runt/absapsql.c#6 $ SAP.
Function HandleRsqlErrors Line 761.
The DB13-protocol retrieves the following information:
BR0278E Command output of 'F:\usr\sap\DEV\SYS\exe\uc\NTAMD64\sapftp.exe -v -n -i 192.168.200.3 -u H:\oracle\DEV\sapbackup\.bdwkhbgq.ftp -b -c put E:\ORACLE\DEV\SAPDATA1\SR3_3\SR3.DATA3 /sap/DEVB/bdwkhbgq/SR3.DATA3':
Connected to 192.168.200.3 Port 21.
220-FTP server ready. 220 This is a private system - No anonymous login 331 User sapbackup OK. Password required 230-User sapbackup has group access to: administrator 230-This server supports FXP transfers 230-OK. Current restricted directory is / 230-************************************************ 230-* Use SITE command to change client codepage: * 230-* ie, site codepage [client codepage] * 230 ************************************************ 200 TYPE is now 8-bit binary 200 PORT command successful 150 Connecting to port 2734 NiWrite error: -6, bytes to send: 32767 bytes written: 0
BR0280I BRBACKUP time stamp: 2007-10-20 03.08.23
BR0279E Return code from 'F:\usr\sap\DEV\SYS\exe\uc\NTAMD64\sapftp.exe -v -n -i 192.168.200.3 -u H:\oracle\DEV\sapbackup\.bdwkhbgq.ftp -b -c put E:\ORACLE\DEV\SAPDATA1\SR3_3\SR3.DATA3 /sap/DEVB/bdwkhbgq/SR3.DATA3': 1
BR0222E Copying E:\ORACLE\DEV\SAPDATA1\SR3_3\SR3.DATA3 to/from /sap/DEVB/bdwkhbgq/SR3.DATA3 failed due to previous errors.
Can some one help me with this issue?
Thank you very much!
regards
Thom

Hello Eric,
unfortunately it is not possible to do it, because I have only remote access to the SAP system.
Is it possible to analyse the problem with the log files?
If yes --> which logs should I post here?
I went through the monitors in RZ20 and found a lot of errors/warning:
Database:
DBIF_SETG_SQL_ERROR
ORA-03106: fatal two-task communication protocol error
DB error 24909 in FET
SQL error 3106: WP in reconnect status
Background:
Job SAP_COLLECT_FOR_PERMONITOR terminated
Utilisation:
100% > 95% Background work process load exceeds threshold
BackgroundService: SystemWideFree BPWP: 1 WPs > 2 WPs Current value over threshold value.
Abap ErrorInUpdate
Syslog : BasisSystem
Operating system call recv failed (error no. & >E5)
The log file dev_cp retrieves the following information after execution of DB Check:
Trace file of control program (trace level 3)
< Function: BtcTrcInit> Function: main SAPXPG 700
2007-10-23--14-42-27 : Before BtcXpgDetach
> Function: BtcXpgDetach < Function: BtcXpgDetach Accept RFC connection from R/3 system
2007-10-23--14-42-27 : Before RfcAccept
2007-10-23--14-42-27 : RfcAccept returned OK
security check switched OFF
Install RFC call SAPXPG_START_XPG
Install RFC call SAPXPG_START_XPG_LONG
Install RFC call SAPXPG_END_XPG
Wait for RFC call SAPXPG_START_XPG or SAPXPG_START_XPG_LONG
2007-10-23--14-42-27 : Before first call of RFCDispatch
> Function: BtcXpgStartXpgLong
2007-10-23--14-42-27 : Beginning of BtcXpgStartXpgLong
> Function: BtcXpgStartXpgImportLong > Function: BtcXpgParam < Function: BtcXpgParam > Function: BtcXpgParam
Line Text
<No StdOut/StdErr output reported>
Target log table is not identical to source
ItGetLine terminated with NULL
<Function: BtcXpgItTransfer > Function: BtcTrcReset < Function: BtcTrcReset Call mode: VIA RF
Input arguments of BtcXpgStartXpg:
My WP settings are:
rdsip/wp_no_dia = 6
rdsip/wp_no_btc = 3
rdsip/wp_no_vb = 1
rdsip/wp_no_vb2 = 1
rdsip/wp_no_spo = 1
Thank you!
Thom

Whole online backup from DB13 failed due to processing error

Hello!
I have difficulty by execution of Whole database online backup from DB13 via FTP on the remote target. The backup goes very slow and breaks after a while.
The BRBACKUP action log looks as follows:
backup_mode ALL
backup_type online
backup_dev_type stage
stage_root_dir /sap/DEVB
compress no
stage_copy_cmd ftp
remote_host 192.168.200.3
remote_user sapbackup
#FILE..... E:\ORACLE\DEV\SAPDATA2\SR3_10\SR3.DATA10
#SAVED.... /sap/DEVB/bdwkuudu/SR3.DATA10 #1/6
BR0280I BRBACKUP time stamp: 2007-10-23 01.44.35
BR0063I 6 of 41 files processed - 12000.047 MB of 93092.766 MB done
BR0204I Percentage done: 12.89%, estimated end time: 23:06
BR0001I ******____________________________________________
BR0202I Saving E:\ORACLE\DEV\SAPDATA2\SR3_6\SR3.DATA6
BR0203I to /sap/DEVB/bdwkuudu/SR3.DATA6 ...
#FILE..... E:\ORACLE\DEV\SAPDATA2\SR3_6\SR3.DATA6
#SAVED.... /sap/DEVB/bdwkuudu/SR3.DATA6 #1/7
BR0280I BRBACKUP time stamp: 2007-10-23 02.38.05
BR0063I 7 of 41 files processed - 14000.055 MB of 93092.766 MB done
BR0204I Percentage done: 15.04%, estimated end time: 21:36
BR0001I ********__________________________________________
BR0202I Saving E:\ORACLE\DEV\SAPDATA2\SR3_7\SR3.DATA7
BR0203I to /sap/DEVB/bdwkuudu/SR3.DATA7 ...
BR0278E Command output of 'F:\usr\sap\DEV\SYS\exe\uc\NTAMD64\sapftp.exe -v -n -i 192.168.200.3 -u H:\oracle\DEV\sapbackup\.bdwkuudu.ftp -b -c put E:\ORACLE\DEV\SAPDATA2\SR3_7\SR3.DATA7 /sap/DEVB/bdwkuudu/SR3.DATA7':
Connected to 192.168.200.3 Port 21.
220-FTP server ready.
220 This is a private system - No anonymous login
331 User sapbackup OK. Password required
230-User sapbackup has group access to: administrator
230-This server supports FXP transfers
230-OK. Current restricted directory is /
230-************************************************
230-* Use SITE command to change client codepage: *
230-* ie, site codepage [client codepage] *
230 ************************************************
200 TYPE is now 8-bit binary
200 PORT command successful
150 Connecting to port 4977
NiWrite error: -6, bytes to send: 32767 bytes written: 0
BR0280I BRBACKUP time stamp: 2007-10-23 03.08.37
BR0279E Return code from 'F:\usr\sap\DEV\SYS\exe\uc\NTAMD64\sapftp.exe -v -n -i 192.168.200.3 -u H:\oracle\DEV\sapbackup\.bdwkuudu.ftp -b -c put E:\ORACLE\DEV\SAPDATA2\SR3_7\SR3.DATA7 /sap/DEVB/bdwkuudu/SR3.DATA7': 1
BR0222E Copying E:\ORACLE\DEV\SAPDATA2\SR3_7\SR3.DATA7 to/from /sap/DEVB/bdwkuudu/SR3.DATA7 failed due to previous errors 
BR0280I BRBACKUP time stamp: 2007-10-23 03.08.43
BR0317I 'Alter tablespace PSAPSR3 end backup' successful
BR0056I End of database backup: bdwkuudu.ans 2007-10-23 03.08.37
BR0280I BRBACKUP time stamp: 2007-10-23 03.08.43
BR0054I BRBACUP terminated with errors
Any helpful information will be appreciated.
regards!
Thom

this post is duplicated at Re: Backup to remote stage failed due to RFC error
please only post your question once and only in 1 forum.
thanks.

OMF export failed due to internal error

I get this error message whatever I do when I try to export as OMF:
"OMF export failed due to internal error"
I tried OMF 1 and 2.
I tried to uncheck "include audio".
I tried an extremely small project (one region, one track).
Always the same error. Problem is there's absolutely no information on what kind of internal error this is.
All other export options (AFF, Open TL and Final Cut) works.
Any ideas?

I suppose that beside CCM 4.1(2) you are using AC 1.4 (1), if yes, then you need to upgrade to AC 1.4 (1) ES11 or upgrade at least to CCM 4.1(3)ES42 or CCM 4.1(3) sr3c
HTH
//Jorge

EssBase: Login fails due to invalid login credentials

I am currently running Hyperion System Planning 9, authenticating users through my LDAP server and am having a problem creating new users. I have gone through what I believe are the steps I need to take and have created my users but now when they try to login to EssBase, through the excel add-in, I get this message: "Login fails due to invalid login credentials"
I have searched the forums and the Essbase knowledge base and have come up empty. The only thing I have found is this:
"You just need to provision your shared services user with access to Essbase. Right-click on your user, select provision and then give them the required Essbase rights."
I have provisioned my users several times and made sure that they are added to the correct groups but they still can't log in.
Has anyone had this issue before?
Thanks,
J

Another point that you need verify, the service sequence:
1. Start the analytic Services
2. Star analytic Administration services.
regards,
Wallace

Error: NDMP operation failed due to media error

I scheduled a RMAN backup job on oracle 11g EM and sometime it failed when running datafile backup. The log showed the error come from media layer and did not specify detail message. We used secure backup to transfer data to tape. There are 4 tape drivers in service, but only one of them always return this error. Could anyone tell how to resolve the problem ?
RMAN-03009: failure of backup command on c1 channel at 01/23/2014 11:17:29
ORA-27192: skgfcls: sbtclose2 returned error - failed to close file
ORA-19511: Error received from media manager layer, error text:
 sbtclose2: Internal error - NDMP Data Service has exited prematurely.
 For more information, please check the transcript for this job ('oracle/33779.1').
ORA-27000: skgfqsbi: failed to initialize storage subsystem (SBT) layer
Additional information: 1292
ORA-19511: Error received from media manager layer, error text:
continuing other job steps, job failed will not be re-run
And I found below logs in the secure backup scripts log. it that mean a network error?
10:16:42 await_ndmp_event: sending progress update
 10:16:42 SPU: sending progress update
 10:17:43 QTOS: received osb_stats message for job oracle/33656.1, kbytes 10452672, nfiles 0
10:17:43 await_ndmp_event: sending progress update
 10:17:43 SPU: sending progress update
 10:19:35 NWEM: saw tape write error log message ("tape write failed due to media error")
tape write failed due to media error
 10:19:35 MNPO: mover halted with reason=media error
 10:19:35 MGS: ms.record_size 65536, ms.record_num 0x28094, ms.bytes_moved 0x280940000
 10:19:35 QTOS: received osb_stats message for job oracle/33656.1, kbytes 10497280, nfiles 0
 10:19:35 MNPO: data service halted with reason=connection error
 10:19:35 SNPD: Data Service reported bytes processed 0x280B40000
 10:19:53 A_T: suppressing filemark output due to NDMP having written one
 10:19:53 A_T: writing marker label; here it is:

Judging by the transcript snips that you provided, I also believe that this is caused by a bad drive or bad media.
Start by looking at the output of the command :
# obtool dumpdev <tape_drive_name>
(replace "<tape_drive_name>" by the name of the drive which was used during the failed job).
Look for any errors or warnings during the date/time the backup job failed. These message usually provide a good idea about the problem that occurred.
Next try the same backup using the same media in another drive to see it the problem reoccurs or not. In case the problem reoccurs, there's a good chance that the media is bad. If the backup succeeds on another drive, then try the same backup using the original drive but with a new media. If the backup fails again on the same drive using new media, you should open a support request with the tape drive vendor. In that case, collect the logs from the tape library (and dump the tape drives is possible).
HTH,
Gio

Error in Tomcat --- context start up failed due to previous errors

Feb 27, 2008 11:05:11 AM org.apache.catalina.core.StandardContext start
SEVERE: Context [/jstl] startup failed due to previous errors
Feb 27, 2008 11:05:13 AM com.sun.faces.config.rules.ComponentRule end
WARNING: [ComponentRule]{faces-config/component} Merge(com.mycompany.TabLabel)
Feb 27, 2008 11:05:13 AM com.sun.faces.config.rules.ComponentRule end
WARNING: [ComponentRule]{faces-config/component} Merge(com.mycompany.Tree)
Feb 27, 2008 11:05:13 AM com.sun.faces.config.rules.ValidatorRule end
WARNING: [ValidatorRule]{faces-config/validator} Merge(com.mycompany.jsf.validat
or.LATER_THAN)
Feb 27, 2008 11:05:14 AM org.apache.catalina.core.StandardContext start
SEVERE: Error listenerStart
Feb 27, 2008 11:05:14 AM org.apache.catalina.core.StandardContext startHello frnds i dont understand what should i do? anybody familiar with this kind of error. please let me know in this case what should i do?
even if i am trying to copy whole files in another folder it shows same msg for that folder too. please help me
Thankyou everybody

Hi ,
I also face this same kind of problem.
I tried to fix the problem but not work out.
I got another solution. I am not sure its a current solution .
Try it carefully.
Finally 1, I take back up -copy of server.xml and common/lib .
2, Un-install Tomcat server.
3, After i have installed fresh tomcat server.
4, Replace back-up copy of server.xml and common/lib.
its working fine

'OMF export failed due to internal error' message

Hi,
Has anyone ever got an 'OMF export failed due to internal error' message when trying to export in OMF format?
I get that every time I try to export in that format.
How can I make it work?
Thanks and best,

Hello sj holcombe,
And welcome to Apple Discussions!
Have you had a chance to check out this Apple support document directly related to this issue? If not, it is a good place to start.
[iTunes displays a -69 error when syncing iPod|http://support.apple.com/kb/HT1210]
Hope it helps.
B-rock

HT3204 When attempting to burn an audio cd, I get an error message that says-burning failed due to unknown error (4280)? It has been working fine, until today...what does this mean??

When attempting to burn an audio cd from my playlist, I get an error message that says, burn failed due to unknown error (4280). It has been working fine for months...any solutions?

I have the exact same problem.
Been searching through this site to try and find an answer but still not come up with anything.
The wierd thing is that a couple of days ago it was working fine, and suddenly overnight it's stopped working.
The only solution i've found is that you need to have administrator rights as it says in the posts on the site below:
http://www.emergingearth.com/itunes-7-cant-burn-cds/
Noticed by the diagnostic in your post that you dont have admin rights like me so that mite be the problem. Not sure if this is the right solution though.
Windows XP

Why is file syncing failing due to server error(s)?

I am working on an HTML file inside Edge Code. When I save, it fails due to 'server error' (no other details). I then get multiple 'conflicted copies' of the same file in my cloud directory. I clean this off and try to resave. It saves, then undoes the last few changes! It reverts back to a previous version of the file.
I guess I'll start working with the 'newest' conflicted copy or something. It's ridiculous. There are no internet issues on my end here, either, which is what I thought at first.
Extremely frustrating! I suppose I'm going to work locally, and then just try to sync. the file after I am done (and after I have made a duplicate in case Cloud tries to overwrite and save an older version of the file).
This pretty much makes cloud-based work fairly useless!

File Sync Links that may help... all the links I have, since I don't know the cause of your specific problem
-https://forums.adobe.com/community/creative_cloud/host_sync
-http://helpx.adobe.com/creative-cloud/help/sync-settings.html
-http://helpx.adobe.com/creative-cloud/kb/arent-my-files-syncing.html
-Size Limits https://forums.adobe.com/thread/1488242
-sync and email link http://forums.adobe.com/thread/1427516?tstart=0
-Phantom folder problem https://forums.adobe.com/thread/1490445
-an overview of assets https://assets.adobe.com/files

'Write' failed due to: Translation Error.

Hi
I'm trying to convert csv and write to a file using FielAdapters in 11g. While reading input i created .xsd using native builder. and using same for write fileadapter. my flow is ReadFileAdapter-->Receive-->invoke-->writeFileAdapter.
Is this right? when I deploy and run I'm getting
<01-Mar-2013 10:09:23 o'clock GMT> <Error> <oracle.soa.adapter> <BEA-000000> <JCABinding=> ReadInput ReadInputAdapter Service ReadInput was unable to perform delivery of inbound message to the composite default/ReadWriteFile!1.0*soa_40862c80-62ba-4425-b7e6-5fcfb5c5b4e4 due to: faultName: {{http://schemas.oracle.com/bpel/extension}bindingFault}
messageType: {{http://schemas.oracle.com/bpel/extension}RuntimeFaultMessage}
parts: {{
summary=<summary>Exception occured when binding was invoked.
Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'Write' failed due to: Translation Error.
Translation Error.
Error while translating message to native format.
Please make sure that the payload for the outbound interaction conforms to the schema.
The invoked JCA adapter raised a resource exception.
Please examine the above error message carefully to determine a resolution.
</summary>
,detail=<detail>Element not completed: 'TestRoot'</detail>
,code=<code>null</code>}
>
I want to convert csv and write as an xml to output file. can some body help me whats is wrong?
here is my xsd
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:nxsd="http://xmlns.oracle.com/pcbpel/nxsd"
xmlns:tns="http://TargetNamespace.com/ReadInput"
targetNamespace="http://TargetNamespace.com/ReadInput"
elementFormDefault="qualified"
attributeFormDefault="unqualified"
nxsd:version="NXSD"
nxsd:stream="chars"
nxsd:encoding="US-ASCII"
>
<xsd:element name="TestRoot">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="TestRecord" minOccurs="1" maxOccurs="unbounded">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="C1" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," />
<xsd:element name="C2" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," />
<xsd:element name="C3" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," />
<xsd:element name="C4" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="${eol}" />
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>
and csv file
12, John, ryegate, Essex
23, Will, wilow, orlean
I also tried inbuild advane function on invoke activity
ora:doTranslateFromNative(bpws:getVariableData('ReceiveInput_Read_InputVariable'),'xsd/Hello2_8.xsd','Test','DOM')
even this didn't work.
can somebody help me how to write as xml from csv?
Thanks
Edited by: user11132693 on Mar 1, 2013 3:01 AM

whne i use transformer it is xslt which takes only values isn't it? And it writes only valuesNope, xslt can write xml... Actually, I'm not sure if I understand what your question is at the moment... Are you still facing the "Translation Error"? Or do you have a problem with a transformation?
Check this... https://forums.oracle.com/forums/ann.jspa?annID=330

Photo upload to iCloud fails with the error message 'Upload failed due to network error'. Ideas?

I am trying to get my photos on my Mac Mini onto my iPad 2 via iCloud. I have tracked the problem down to upload failure from Mini to iCloud. 1St (&every) photo upload fails with the message 'Upload failed due to network error'. Any ideas?

I doubt this issue is related to the Mac Mini specifically.
I have 44 photos shot with an iPhone 3G that will not upload to iCloud Photo Library. I try and drag-and-drop them onto the web interface and I get the same error message you did:
Upload Failed
44 items were not uploaded due to a network error.
However, I have another 62 photos shot with the same iPhone 3G that upload without issue. And I just uploaded 440 photos from an iPhone 4 without issue.
I thought it may have something to do with certain EXIF tags missing on the photos that would not upload but I have not been able to figure out a pattern when comparing photos that work and photos that don't work.
The photos that won't upload open fine in QuickLook, Preview, and Pixelmator so I doubt the image is corrupted in some way.
I can AirDrop the photo to my iOS device and it will upload to iCloud Photo Library, the photo/video count will be incremented on the iOS device and iCloud Photo Library but the photo will never be displayed in iCloud Photo Library. When I delete the photo on the iOS device the photo/video count will decrement on the iOS device but will remain the same in iCloud Photo Library. When this occurred the following error was thrown in the iCloud Photo Library web interface:
Expanding Details shows the following log:
https://gist.github.com/jameswthorne/757e319b9fee63119890

Portal login failed due to Desktop error

Similar Messages

Maybe you are looking for