Portal menu items not loading

Hi,
for some reason, on my browser most of the portal menu items don't load properly. This happens on the detailed navigation when I expand any folder that contains iView links. I see the message loading... but nothing happens.
Some of the iviews don't load either. I see a flash message on the statu bar at the bottom that says 'error on the page' and then 'done'. I'm sure this is a IE issue since it works just fine on a different computer for the same portal. What could be wrong with my browser ? Any help would be greatly appreciated.
Sudheer

Hi Anand,
You need to make host entry for IP add (URL IP add. of Porta) in host file.
To add host entry go to run from start and type drivers it will open new window, click on etc folder,new open host file in notepad or any other word editor, there you will find default host entry for localhost, below this add your entry, e.g.
127.0.0.1       localhost
<IP add>       <host name>, where host name will be your company name or any thing.
While opening Portal use host name instead of IP in URL
Thanks
Sandy

Similar Messages

  • Gmail in Safari - it's menu items not working or on and off

    Ned Hamson here: Down loaded the neat ap and here is what if found:
    Don't have a clue what leadertech is? Gmail in Safari - it's menu items not working or on and off.
    [failed] com.leadertech.PowerRegister.LGT2.c59807af95d106639fca8f10676ced62.plist
    Hardware Information:
              MacBook (13-inch, Mid 2009)
              MacBook - model: MacBook5,2
              1 2.13 GHz Intel Core 2 Duo CPU: 2 cores
              2 GB RAM
    Video Information:
              NVIDIA GeForce 9400M - VRAM: 256 MB
    System Software:
              OS X 10.9.2 (13C1021) - Uptime: 0 days 5:31:41
    Disk Information:
              FUJITSU MHZ2160BH FFS G1 disk0 : (160.04 GB)
                        EFI (disk0s1) <not mounted>: 209.7 MB
                        Maggie (disk0s2) / [Startup]: 159.18 GB (128.13 GB free)
                        Recovery HD (disk0s3) <not mounted>: 650 MB
              MATSHITADVD-R   UJ867A 
    USB Information:
              Micron Built-in iSight
              Apple Inc. BRCM2046 Hub
                        Apple Inc. Bluetooth USB Host Controller
              Apple Inc. Apple Internal Keyboard / Trackpad
              Apple Computer, Inc. IR Receiver
              Logitech USB Receiver
    Thunderbolt Information:
    Gatekeeper:
              Mac App Store and identified developers
    Problem System Launch Agents:
              [running] com.paragon.NTFS.notify.plist Support
    Launch Daemons:
              [loaded] com.adobe.fpsaud.plist Support
              [loaded] com.genieoinnovation.macextension.client.plist Support
              [loaded] com.google.keystone.daemon.plist Support
              [loaded] com.oracle.java.Helper-Tool.plist Support
    Launch Agents:
              [loaded] com.google.keystone.agent.plist Support
              [loaded] com.oracle.java.Java-Updater.plist Support
              [loaded] com.paragon.updater.plist Support
    User Launch Agents:
              [loaded] com.adobe.ARM.[...].plist Support
              [loaded] com.citrixonline.GoToMeeting.G2MUpdate.plist Support
              [running] com.google.Chrome.framework.plist Support
              [failed] com.leadertech.PowerRegister.LGT2.c59807af95d106639fca8f10676ced62.plist Support
              [not loaded] com.spotify.webhelper.plist Support
    User Login Items:
              iTunesHelper
              SpeechSynthesisServer
              Dropbox
              AdobeResourceSynchronizer
              FriendFeed
              Opera
              EvernoteHelper
    Internet Plug-ins:
              FlashPlayer-10.6: Version: 13.0.0.206 - SDK 10.6 Support
              Default Browser: Version: 537 - SDK 10.9
              AdobePDFViewerNPAPI: Version: 11.0.06 - SDK 10.6 Support
              AdobePDFViewer: Version: 11.0.06 - SDK 10.6 Support
              Flash Player: Version: 13.0.0.206 - SDK 10.6 Support
              o1dbrowserplugin: Version: 5.3.1.18536 Support
              QuickTime Plugin: Version: 7.7.3
              nplastpass: Version: 2.0.25 Support
              googletalkbrowserplugin: Version: 5.3.1.18536 Support
              DirectorShockwave: Version: 12.1.0r150 - SDK 10.6 Support
              JavaAppletPlugin: Version: Java 7 Update 55 Check version
    Safari Extensions:
              LastPass: Version: 3.1.21
              AddThis: Version: 1.7
              Evernote Web Clipper: Version: 6.1
              TypePad Blog It: Version: 1.0
              XKit 7: Version: 7.4.2
              Keeeb : Version: 1.2.17
    Audio Plug-ins:
              BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
              AirPlay: Version: 2.0 - SDK 10.9
              AppleAVBAudio: Version: 203.2 - SDK 10.9
              iSightAudio: Version: 7.7.3 - SDK 10.9
    iTunes Plug-ins:
              Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
    User Internet Plug-ins:
              WebEx64: Version: 1.0 - SDK 10.5 Support
              CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 Support
              Picasa: Version: 1.0 - SDK 10.4 Support
              Google Earth Web Plug-in: Version: 7.1 Support
    3rd Party Preference Panes:
              Flash Player  Support
              Java  Support
              Paragon NTFS for Mac ® OS X  Support
              Xmarks for Safari  Support
    Time Machine:
              Skip System Files: NO
              Mobile backups: OFF
              Auto backup: NO - Auto backup turned off
              Volumes being backed up:
                        Maggie: Disk size: 148.25 GB Disk used: 28.92 GB
              Destinations:
                        Seagate Expansion Drive [Local] (Last used)
                        Total size: 2 
                        Total number of backups: 8
                        Oldest backup: 2014-02-28 01:27:57 +0000
                        Last backup: 2014-05-04 20:43:07 +0000
                        Size of backup disk: Excellent
                                  Backup size 2  > (Disk size 148.25 GB X 3)
              Time Machine details may not be accurate.
              All volumes being backed up may not be listed.
    Top Processes by CPU:
                   3%          WindowServer
                   2%          mdworker
                   0%          systemstatsd
                   0%          mds_stores
                   0%          mds
    Top Processes by Memory:
              90 MB          Opera
              35 MB          Finder
              33 MB          FriendFeed
              23 MB          Opera Helper
              23 MB          CVMCompiler
    Virtual Memory Information:
              34 MB          Free RAM
              566 MB          Active RAM
              544 MB          Inactive RAM
              305 MB          Wired RAM
              3.58 GB          Page-ins
              63 MB          Page-outs
    <Re-Titled By Host>

    Hi..
      [loaded] com.genieoinnovation.macextension.client.plist
    You have inadvertently installed malware (Genieo)
    Help here > The Safe Mac » Search Results » genieo
    As for the Safari Gmail menu items not working ..
    It may be one or more of your Safari extensions:
    Safari Extensions:
              LastPass: Version: 3.1.21
              AddThis: Version: 1.7
              Evernote Web Clipper: Version: 6.1
              TypePad Blog It: Version: 1.0
              XKit 7: Version: 7.4.2
              Keeeb : Version: 1.2.17
    From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
    If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.

  • Why would menu items not display?

    I am trying to troubleshoot an issue a user is having with Bridge CS3. Several selections from his "Tools" menu have disappeard (not grey'd out, but actually missing). The one he's specifically looking for is the InDesign Contact Sheet command. He used to have them and now they are gone. I've compared my preferences with his and they are identical. He's running Tiger and I'm on Leopard.
    Here's another odd thing. My version is 2.1.1.9 and his is 2.1.0.100. Yet when I run Software updates and the Adobe updater on his computer, it reports back that everything is up-to-date. Even though our versions are different, as well as a different OSs, this doesn't explain why he used to have it and no longer does.
    Any thoughts?

    The 2.1.1 update can be downloaded from here - http://www.adobe.com/support/downloads/detail.jsp?ftpID=3813
    The InDesign menu item comes from a script loading at launch. You can look in the preferences> Startup Scripts and see if it is present but disabled.

  • Crystal Report menu-item not visible on SAP menu of client

    SAP 2007A SP:00 PL:38
    Crystal Report 2008 (on start menu)
    Crystal Report 2.0.0.6
    1. Installed CR 2008 on server and it runs fine both from Start menu and from within SAP menu. SAP also shows Crystal Reports menu item and Crystal Admin.
    2. Installed Crystal Report on one of the clients and it works fine in same way.
    3. On 2nd client, SAP Crystal Runtime installed as follows: SAPCrystalSetup.exe run first, then DotNetFramework3.5  run - it resulted in "Setup error". Then run the CRRuntime_12_0_mlb.exe without errors. Then installed CR designer, On this client, Crystal Reports 2008 opens fine from Start menu. However from within SAP, it does not show Crystal Reports Admin nor the Crystal Reports menu-item.
    a) This user has "automatic" start of Crystal Reports 2.0.0.6 in Add-on Administration.
    b) However, in Add-on Manager, Crystal Report does not show at all.
    c) In Add-Remove programs, I see that Microsoft .Net Framework 3.5 SP1 exists on the client.
    d) OS is Microsoft XP.
    How could I see Crystal Administration or 'Crystal Reports' menu-item from within SAP on this client?
    Thanks, Ajay Audich

    Hi,
    1) On Add-Remove Programs on the client, I see the following:
    Crystal Reports 2008 Runtime
    Crystal Reports Basic 2008 for SAP Business One
    Microsoft.NET Framework 1
    Microsoft.NET Framework 2.0 Service Pack 2
    Microsoft.NET Framework 3.0 Service Pack 2
    Microsoft.NET Framework 3.5 SP1
    SAP Business One Crystal Reports 2.0.0.6
    2) The settings are:
    Company Preferences for Crystal Reports for SAP Business One / Version 2.0.0.6/ Default Group Automatic/ Active Yes
    User Preferences Tab-User RT-Preference is set to Default.
    On server, 'Installed Add-ons' tab shows Crystal Status as 'Connected'
    However, on the client, Add-on manager, both "Installed Add-ons" as well as "Pending Add-ons" tabs do not show Crystal Reports row at all.
    3) The user RT on the client is a super-user.
    Thanks.

  • Help menu items not available Logic Pro 9

    I think this problem occured after upgrading to Mavericks. When I use the help menu in LogicPro9 and click on the most relevant keywords that I have typed I am presented with a dialog that indicates: "The selected topic is currently unavailable. The topic you were trying to view could not be found."
    I think this may be related to Spotlight not being indexed properly. After having problems re-indexing Spotlight I finally realised that in order for Spotlight to re-index correctly I had to add my permanently installed SD card to the Spotlight Privacy eclusion list. Instead of Spotlight taking 5+ hours to re-index a fast SSD it now did it in about 10mins.
    I am now confident Spotlight has re-indexed successfully.
    But the help menu items are still "unavailable"
    OSX 10.9.1
    MacBookPro Mid 2012
    Logic Pro 9.1.8

    I'm still putting this question out there to anyone who can help solve this problem. After trashing the Logic Pro9 App from the Finder>Applications I visited the Mac App Store and under the Purchases icon I re-installed Logic Pro9.
    The Help menu is still returning:
    "The topic you were trying to view could not be found." when clicking on the suggested returned results in relation to my search keywords.
    I know there are better resources out there but I find it handy to use the help menu instead of reaching for a book or website/weblink.
    Eventually I will switch to Logic Pro X but as Lennar Digital is still finalising their 64Bit version release of Sylenth (popular soft synth)  I will wait until that is completed later in the year.

  • "Always Available off line" menu item not available for user on computer where another does see it. This is on Active Directory Computer

    I have a lap top that I want to add files via Always available off line.
    When I logon and right click on a folder share I can see the menu item all was available offline.  When the user logs on this option is not available.  I have turned the feature on and off, rebooted, I have deleted the cache folder but I cannot
    see how to get this menu item to show up.  It's odd that it shows up for one user but not another on the same computer.  I have searched the web and tried the above things and others but cannot seem to resolve this problem.  It seems pretty
    common and their. This computer is on a domain.
    thanks.

    Hi,
    So as we edited the group policy settings in the default domain policy, the menu item is now available?
    And as we are in a domain environment and the settings is configured under the default domain policy, how the domain users behave different from each other? Which someone could see and the other not?
    Could we please generate a
    GPO report to take a check?
    And regarding group policy issue, it is recommended to seek help in the group policy forum, experts there may share some insights:
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserverGP
    Best regards
    Michael Shao
    TechNet Community Support

  • Custom menu item not appearing in HTML5 Output

    I'm trying to add a custom menu item to the top right of a project, it shows up fine in the flash output of a published SCORM file, but it's non-existent in the HTML5 output.
    Has anyone experienced this issue, or have any suggestions for a solution?
    Thanks in advance for any help you can provide!

    I did it through the Skin Editor in Captivate, it is not an external flash menu...I wouldn't expect it to convert flash to html5.  Through the skin editor you can add extra buttons, in the same place you can move the table of contents button, to the "top right".  The problem is, the custom menu items won't even show the text where the link should be in html5, nothing... only when published to flash.

  • ? Horizontal Menu Bar not loading in IE

    Our horizontal menu bar does not load into IE.  It works fine in Safari, Firefox and Chrome.  It used to work on all four
    browsers so I've gone back and uploaded an older version of our site to see if I could get it to work in IE.  Even this older
    site does not load anymore, also reloaded all our older Spry Assets and CSS. 
    The Website is www.sundogexpeditions.com
    Thanks for any help and I'll provide any additional info to help diagnose my problem

    We found the problem in the ul.MenuBarHorizontal li MenuBarItemIE .  The display listed "none"  We deleted it
    and everything appears to display just fine in IE.  Not sure if this was the best fix but it works for now.
    Thanks

  • Strange ATV2 behaviour - Movies can't be selected for downloaded & most menu items not selectable??

    ATV2 fully online, previews movies, downloads YouTube, Homesharing all good (and a seasoned ATV owner and user)
    However download movies is not working, and no error message just a "beep" sound when you select "rent movie".
    Also many of the menu items cannot be selected.  You cannot down select most of the items under General, so it's impossible to change settings, or to do any troubleshooting.  You get the same "beep" sound when you select Name, Network, iTunes Store, Reset, etc.
    I have done the usual power down, plus reset using remote, but the system doesn't seem to go back to factory default.  I haven't tried the mini-USB connection to MAC as I don't have a cable but hoping someone can help?

    <Button guid="guidCBExtensionPkgCmdSet" id="cmdIdCBAutoSave" priority="0x0100" type="Button">
    <Parent guid="guidCBExtensionPkgCmdSet" id="CBAutoSaveGroup" />
    <Icon guid="guidImages" id="bmpDisk" />
    <CommandFlag>TextChanges</CommandFlag>
    <!--<CommandFlag>DefaultDisabled</CommandFlag>-->
    <Strings>
    <ButtonText>Enable Document AutoSave</ButtonText>
    </Strings>
    </Button>
    private void OnBeforeQueryStatus(object sender, EventArgs e)
    DbgMessage("OnBeforeQueryStatus");
    var myCommand = sender as OleMenuCommand;
    if (null != myCommand)
    switch (myCommand.CommandID.ID)
    case (int)PkgCmdIdList.CmdIdCBAutoSave:
    myCommand.Enabled = true;
    myCommand.Text = _autosaveEnabled ? "Disable Document AutoSave" : "Enable Document AutoSave";
    break;
    case (int)PkgCmdIdList.CmdIdCBAutoSaveProject:
    myCommand.Text = _autosaveProjectEnabled ? "Disable AutoSaveProject" : "Enable AutoSaveProject";
    myCommand.Enabled = _autosaveEnabled;
    break;
    default:
    break;
    DbgMessage(string.Format("Id: {0} Text: {1}", myCommand.CommandID.ID, myCommand.Text));
    Very puzzling that I have only seen the bad behavior on Win8.1, and not when debugging the extension.  (Haven't been able to try the extension on Win8, but have tried it on several Win7 computers, and one WinServer 2012 R2 computer.)
    Is there someplace to look for runtime exceptions?  I haven't seen any in the Output window when the bad behavior occurs....
    (If you want to try the extension, you can add a gallery and point it to www.cbates.net/VSIX/atom.xml.)

  • How to have some top level menu items not be hyperlinks

    I have a navigation band where 5 of the 6 top level items need to NOT be hyperlinks but simply "category titles" that you mouseover to display the submenu - which are the links to web pages.
    An example of this is on the Amazon.com home page - the items under "Shop All Departments" has categories that are not clickable, but when you mouseover display the clickable submenu.
    Is it possible to customize some but not all of the top menu items and how?
    What do I need to modify in the CSS so that the top "category title" looks/behave the submenu (same font color/bgcolor changes) but no active hyperlink?

    Here is a link to my pagewhere I am testing the navigation. Currently there is only this one page and I have <a href="#"> for the links.
    The only menu item that should be clickable in the top level is "Contact"
    Everything in the second and third level (Events > Research >...) needs to be clickable
    Everything is working as I want except that "Research" needs to be clickable
    - and I would like to have the clickable item text be underline when in the hover state but I want to get the base navigation working first
    The closest matching code I found in the CSS is:
    #MenuBar1 li .MenuBarItemSubmenu,
    #MenuBar1 li ul li .MenuBarItemSubmenu {
        cursor: default;
    If I remove this, all the top level items become clickable. Let me know if there is other information you need. I super appreciate your help with this!

  • Forms 6i Menu Items not Lauchning (FRM-40010: Cannot read form...)

    Sorry for the newbie issue - I just haven't been able to figure this out...
    I inherited maintenance of a old Oracle Forms Application, I was told it was version 5. And all the source modules were appended with "v05" like form1_v05.fmb, etc. I since discovered that when the users launch it they run against the forms 6i run time - so I guess this means it is actually a forms version 6i application.
    The App has about 20 forms, 20 reports and a menu - and no project.
    I copied all the source files into a working directory, then I created a project with the project builder using the "use all files in the current directory".
    When I run the app ( by drilling down to this app's "logo" form - a splash screen contain our company logo, and a Menu structure it runs fine.
    But just about every menu item I attempt to select ( i.e. MENU->Catagory1->OrderForm or in my case something like MENU->Inbound->Entry/Maintenance) results in no new form launching and the status bar contains the error message like "FRM-40010: Cannot read form order_v05.fmx"
    In the above example the project does contain a order_v05.fmb, and it compiles fine ( in fact a project "build all" generates no errors or warnings ) - my single working directory contain all the source modules ( like fmb's, rdf's and mmb's) and compiled versions ( fmx's, mmx ) . Specificlly the order_v05.fmx is also there.
    So why can't the app find the compiled form compiled in the same project and located in the same directory?
    I also see several ERR files but the only thing the err files contain is a whole lot of lines saying things like " Compiling POST-FORM trigger on form... No compilation errors."
    Any help getting this beast to run would be appreciated.

    I may have a clue as to what is causing the issue, but don't know how to fix it.
    I started poking in the menu items, and the child menu item that is supposed to do something runs some "Menu Item code" like this:
    begin
         hide_window('DLG_MAIN');
    CALL_FORM( 'out_order_v05.fmx'
    , no_hide
    , do_replace
    , no_query_only
    , no_share_library_data );
    show_window('DLG_MAIN');
    end;I made a NEW root menu item, with a new child menu item and set it's "Menu Item code" like this:
    begin
         hide_window('DLG_MAIN');
    CALL_FORM( 'C:\Data\_OraFroms\ITFS_V05\order_v05.fmx'
    , no_hide
    , do_replace
    , no_query_only
    , no_share_library_data );
    show_window('DLG_MAIN');
    end;And when I made this change, my new menu item launched the form, but the original one did not ( notice the only difference is my new menu item gives a fully qualified path to the file name ).
    So it looks like my project is clueless as to it's own home directory - anyone know how I clue it in?

  • 30EA2 problem: Menu items not available

    After having used Data Modeler 30EA2 successfully for a while, suddenly several menu items are missing.
    E.g. in my File menu "Open" is not shown (in fact only "Save", "Save as", "Compare With" and "Exit" is shown). This clearly makes the modeler unusable, as I cannot open my models!
    The problem continues even after I download the product (Product Version: 3.0.0.653) from OTN, unzip in a new location and use that.
    Any suggestions?
    -- Peter

    Hi Peter.
    please try removing (or renaming the folder called .oraclesqldeveloperdatamodeler in C:\Documents and Settings\<YOUR_WINDOWS_USER>)
    This is a folder where the datamodeler IDE caches are stored.
    Hope that helps,
    Ivaylo

  • Add-on menu item not added

    Applies to: Firefox 33.0 and 34.0 (beta)
    Platform: Android 4.4.4 on Nexus 5 32 GB
    When I install an add-on that should add an item to the Firefox menu such as Quitnow or LastPass, the new menu item does not show up. With LastPass, that breaks the add-on entirely since you can't log into the service. With Quitnow, the add-on is rendered similarly useless.
    I have tried clearing app cache/data, uninstalling and reinstalling Firefox, and doing a factory reset on the phone. Results were always the same. No other add-ons were installed.
    Is there a method to get these sorts of add-ons to install correctly?

    The issue isn't that I can't close Firefox. I know that can be accomplished other ways, as you stated. The issue is that add-ons such as the ones listed that SHOULD be able to add menu items aren't installing properly/completely. Thus, the LastPass add-on is entirely broken because I can't log in and set it up as this is done via selecting a menu item that isn't there.
    I only brought up the QuitNow add-on because it's another add-on that should add a menu item, but doesn't. Thus it seems to be a general problem with installing FireFox add-ons and not limited to just one add-on.
    There are no Developer Options enabled. I installed Firefox and the extension on a freshly reset phone using the factory image from Google and had the same issue.

  • Login / startup items not loading at boot

    Since 10.10.1, I've had a problem with my login / startup items not all loading at startup.  It occurs about 1 in 3 boots (only half of my items load).  Any idea what could be causing this?

    A little more info . . . I've done a fresh install (cloned to an external drive, erased my internal SSD, installed Yosemite 10.10.2 from a USB stick, migrated everything from the cloned external), and I still have this problem.

  • [Solved] Menu Editor not loading.

    I installed py solitaire, it didn't show up in the list.  I tried to open up the menu editor, and that will not load either.  I have fam and alacarte installed, and I am not sure what is wrong.  Any help would be greatly appreciated.
    Edit:  alacarte will not run as a normal user, only as root.  Is this normal?
    Last edited by perlluver (2008-02-24 21:45:37)

    perlluver wrote:
    I installed py solitaire, it didn't show up in the list.  I tried to open up the menu editor, and that will not load either.  I have fam and alacarte installed, and I am not sure what is wrong.  Any help would be greatly appreciated.
    Edit:  alacarte will not run as a normal user, only as root.  Is this normal?
    Ok I ran menu editor from the terminal and I got this message:
    ** (gmenu-simple-editor:7417): WARNING **: Failed to add monitor on '/home/perlluver/.config/menus/applications.menu': Permission denied
    ** (gmenu-simple-editor:7417): WARNING **: Failed to add monitor on '/home/perlluver/.config/menus/applications-merged': Permission denied
    ** (gmenu-simple-editor:7417): WARNING **: Failed to add monitor on '/home/perlluver/.config/menus/settings.menu': Permission denied
    ** (gmenu-simple-editor:7417): WARNING **: Failed to add monitor on '/home/perlluver/.config/menus/settings-merged': Permission denied
    ** (gmenu-simple-editor:7417): WARNING **: Failed to add monitor on '/home/perlluver/.config/menus/preferences-merged': Permission denied

Maybe you are looking for

  • How to download internal table data to .xlsx file ?

    Hello All, I am using SAP ECC 6.0. I need to download internal table data to .xlsx file. I tried GUI_DOWNLOAD, all the data are getting transferred to the .xlsx file, but while opening I am getting the below error. Excel cannot open the file "downloa

  • HELP....why do I keep getting "Not Delivered" errors when trying to send a Group MMS text message?

    I am trying to send a Group MMS text. There are 6 recipients. I hit "send" and the progress bar goes almost to the very end, and then hangs up....and eventually I get a "Not Delivered" error message. I click on the "i" icon and it says "your message

  • Photo Stream not uploading unless photos app is open

    I am having issues with Photo Stream. According to Apple-- "On an iOS device, new photos you take will be automatically uploaded to your Photo Stream when you leave the Camera app and are connected to Wi-Fi. Note: Photo Stream does not push photos ov

  • LMS 3.2 RME 4.3.1 Inventory Failing for Switches

    I have two 6500 Series switches that RME is not able to get the inventory for.  It keeps on failing.  I have tried to increase the SNMP timeout to a larger number also increased the telnet timeout.  I've seen it asked for in other posts.  Here is my

  • DefaultButton not working

    Below are two bits of code. The first works perfectly. The same <FORM> block is used in the second piece of code, but the "defaultButton" doesn't work at all. I can't figure it out. Please help. The only difference I can see is the first clicks to a