Portal needs 'amconsole' to be up and running
Running the portal displays a blue bar (might be a empty container) in the browser. If i log into the amconsole and refresh the browser the portal opens with all channels and container in the browser. This can be reproduced every time.
After 'amconsole' timeout, on refreshing the browser i get the blue bar again. I need to start the amconsole again and refresh the browser to get back channels in the portal.
I use 'amadmin' user to customize/modify channels and run amconsole. Any suggestions please.
URL i used to start the portal:
http:x.x.x.x:80/portal/dt?provider=MyContainer
MyContainer and created/customized using 'amadmin' in amconsole.
Thanks.
Thanks for the reply.
Only 'org' within the portal is 'ISDDemo', so opted to:
http://x.x.x.x:80/portal/dt
I got sunone sample portal getting displayed.
I tried using org name along with url, and a empty container. Developers guide suggests me to name the container in the url which has all the customized channels.
Still trying to get this right.
Thanks
Similar Messages
-
Hi,
My MacBook Pro has been acting up a little. I tried the usual repair options: repair permissions, zap P-ram, and Safe Boot (although I've never gotten the machine to Safe Boot properly since installing Lion). I ran Verify Disk and it stopped part way through, saying that the HD is corrupt. It instructed me to start up from the (installation?) disk and run the repair function from the disk utility. (I've included a screen shot of the Verify Disk screen). I have no idea how to go about this without a physical start up disk (Lion). I do have the disks that came with the computer at the time of purchase (Will one of those work?).
Thanks,
JGWThank you!
I was able to access the recovery function and used the Disk Utility to repair my HD.
Would you recommend that I still re-install Lion?
Again, thank you for taking the time to help me!
Best wishes,
JGW -
Urgent help needed!! Layout table and Draw layout cell dissapeared.
I need some urgent help. I'm using CS3 but for a while my
Layout Table and Draw Layout Cell icons appear greyed and can't use
them at all. Is there any kind soul out there who knows how to fix
this? I'm going nuts trying all the possible options but none seem
to work.
Help please!!!!!!> How would you about designing a page without using html?
You don't. But I don't recall suggesting that you not use
HTML. I just
suggested that you use best-practice HTML, no? Or maybe you
meant to ask
how you would go about building your site without learning
HTML? In that
case, I think you are outta luck. Using DW without knowing
HTML is a very
punishing experience, I'm afraid.
> PS: A virtual box of 12 bottles of Moet Chandon is
already on your way!!
I'd prefer Cristal, please.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Untersberg" <[email protected]> wrote in
message
news:g4tj9a$m5o$[email protected]..
> Ahhhhhh!!!!! They came up!!!! They came up again!!
> I was on standard mode. Now going back to your
suggestion, which I really
> appreciate. How would you about designing a page without
using html? I'm
> just
> redesigning my website at the moment and need it to get
going urgently,
> hence
> the reluctance to start learning HTML at the moment.
I'll do after but I
> need
> to get this up and running fairly quickly.
>
> Cheers.
>
> PS: A virtual box of 12 bottles of Moet Chandon is
already on your way!!
> -
JApplet's init, start and run
I'm new to JApplets. My question is, does an applet need to have init, start and run methods? If it dosn't, does it essentially require any one of these three? What's the basic function of each anyways??
thanks a lot up frontTo have a applet to work you need the init() method
the run and start methods are normally if you are useing
a thread
pa hopes this helped -
my hard drive crashed on my MacBook Pro crashed and I need to get my CS5 up and running on the new hard drive. I copied what I could onto an external hard drive but when I drag and drop I get directions to uninstall but the uninstall folder I have does says it is an alias that is no longer present. I get error 6. I would like to get my software up and running on the laptop again please
If you subscribed to iTunes match the songs are kept in icloud. If you didn't but you did save the actual iTunes library folder which should include the music, video, etc. you should be able to just drag this file back to your machine in the same place and when you open iTunes it will give you a chance to identify the iTunes library folder.
You can test this to find out if you saved the media files or not and don't need to attach your nano to do it.
You are correct that once you connect the nano it will clear the existing files from it and sync it with the new iTunes library.
If you don't have the media files i'm not sure if/how to get them back on a windows ipod. I have everything backed up regularly because of the horror stories I have seen & heard. -
What licenses do I need to get a virtual desktop environment up and running?
I’m trying to figure out what licenses I need to get a full Windows Virtual Desktop Infrastructure (VDI) up and running with the Remote Desktop Service (RDS) roles.
I have Win.Server 2012 running Hyper-V, which has about 10 different virtual machines (VM) with either Win.7 or Win.8 installed on it. These VMs will act as virtual desktops (VD) for about 200 people to remotely access and use.
My question is, what licenses do I need to support this scenario?
So far, I’m planning to purchase a few Windows Server 2012 Standard Edition with 10 Client Access Licenses ( $1414.19 each). I’m assuming that’s 1 license for the server and 10 Client Access Licenses (CAL) for users who will access the VDs. I’m also planning
to buy about 200 RDS CALs ($149 each) for the rest of the users to access the VDs. Do I need to buy additional licenses for each VM image I create (the 10 images I mentioned earlier)? These VMs are in a pooled virtual desktop collection, so they reset themselves
when users disconnect from them. If I have personal desktop collections which give unique desktops to each user and saves their settings, will my license have to change if I have that too?
At first I thought just buying the RDS CALs will allow me to install windows where ever I want, how many times I want and all I have to worry about is paying for the client access, but do I need to pay for the OS as well? So essentially I’m doubling the
license?
A side question not really related is, if I have Windows Thin PC, (which was said to come free if I have SA with another product) and bought the Windows Server license, does that come with SA and I can install Windows Thin PC as many times as I want
on which ever desktop I have that will connect to this VDI system?The 10 server licenses are fine, but they don't help you with VDI or remote desktops. I you want to install the Remote Desktop Session Host (formerly known as Terminal Server) role on all your servers und provide remote desktops for your 200 users, 200 RDS
CALs are the right choice (per user or per device).
But if your 200 users have access to virtual desktops, you need 200 VDI licenses. It doesn't matter if you only have 10 virtual desktops if potentially all your 200 users have access to them. VDI licensing is not based on a concurrent model, so every client
that can connect to a VM needs its own license. If Windows 8 Enterprise with SA is on all your client devices, you're set because SA gives users access rights to up to 4 Win8 or Win7 VMs concurrently (local or remote). In addition
it gives them a so-called companion subscription license for personally owned, non-primary devices.
For those primary corporate devices that are without SA, you'll need to purchase a single VDA license for each device that connects to any number of your Win7 or Win8 VMs. The same applies to personally owned devices of users who don't have a primary
corporate device with SA. In other words, BYOD is supported if your primary device is under SA.
For neither VDI/SA nor VDA it does matter if users are connecting to different VM images or only one. Typically, they cannot connect to more than 4 VMs at the same time in order to stay within the licensing limits.
Benny -
Aperture wont start when I booted up this morning . There is an upgrade that it needs to install and I am being directed to log onto a hotmail account that does not exist to install it . I cant get any sense out of hotmail and the account has been deleted because I have never used it .
I need to get into my files asap but I am just going around in circles - please help - anyone ?APERTURE was bought via the Apple On Line Store .
I kew there is an update cause when I clicked on updates , there was an update that I needed cause Aperture was not running as it should ie . it would not load
I am running Mavericks OS.
My Apple ID is the same as my email account but I have discovered that I have two Apple ID accounts and I could not remember my password on the one that I used to download the original Aperture - I have since contacted Apple and they have merged the two so Ihave sorted it out that way .
When Aperture would not start , it wasn't asking me to log onto my email account, it was asking me for my Apple ID which was the same thing but it was my emergency ID and I could not remember the password . Being enturely thick where computers are concerned , I got very confused and remain confused because having bought a new MACBOOK AIR , I find it wont recognise my back up hard drive or my AIRPORT so I am not having a great time with MAC products to be honest - cant get my business back up and running after nearly three weeks so Apple and MAC are not my favourite words !
Anyway, I did get it sorted finally by ringing Apple but thanks for replying anyway - it turned out that Aperture was the very least of my problems when my hard drive failed installing Mavericks - wasnt Mavericks fault, my drives have to work hard and it just died . -
I downloaded and installed Airport Express Utility 5.6 to get my old Airport Express to work with the latest Mac OSX 10.7.4, but when I install and run it, it still says my Airport Express is out-of-date and needs the 5.6 utility. What's up?
It is likely that you downloaded AirPort Utility 5.6.1. If you checked the requirements, this only runs on Leopard or Snow Leopard Macs.
You have Lion, so you need AirPort Utility 5.6 for Mac OS X Lion -
I have a Macbook Pro 15" that is three and a half years old. Although it has slowed a bit, it still runs well and runs every program I need. Any tips for how to keep this old computer running well and in good health?
I have a 250 gig drive and try to keep at least 100 gigs unused at all times, 4 GB 667 MHz DDR2 SDRAM memory, back up with Time Machine and CrashPlan, and have OS X 10.7.3.
This was my first Mac since an old Apple II GS. After that I used PC's and got really good at reformatting, replacing drives, reinstalling, defragging, resolving software conflicts, etc. Since switching back to Macs (five in my extended family now), I haven't had to do any of those things. So, although, the cost is three times as much, the aggrevation has been ten times less.
I'm retired and living on a fixed income and would therefore like to keep this computer running as opposed to constatntly upgrading.
That said, any tips?
Thanks
It does have a crack on the left of the screen case about 3/4'' up from the bottom. I've posted that as another question.Kappy's Personal Suggestions for OS X Maintenance
For disk repairs use Disk Utility. For situations DU cannot handle the best third-party utilities are: Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible. Drive Genius provides additional tools not found in Disk Warrior. Versions 1.5.1 and later are Intel Mac compatible.
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger. These utilities have limited or no functionality with Snow Leopard or Lion and should not be installed.
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems. For more about malware see Macintosh Virus Guide.
I would also recommend downloading a utility such as TinkerTool System, OnyX 2.4.3, or Cocktail 5.1.1 that you can use for periodic maintenance such as removing old log files and archives, clearing caches, etc.
For emergency repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. There is no confirmation that this version also works with Lion.
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand. I also recommend booting into safe mode before doing system software updates.
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
Carbon Copy Cloner
Data Backup
Deja Vu
SuperDuper!
SyncTwoFolders
Synk Pro
Synk Standard
Tri-Backup
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
Additional suggestions will be found in Mac Maintenance Quick Assist.
Referenced software can be found at CNet Downloads or MacUpdate.
Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.
Adding more RAM, if feasible, and a new, faster hard drive may also help pep it up a little. -
I recently spilled liquid on my computer, but it is up and running, it loads and brings me to the safe boot screen where I need to type my password, but It is not recognizing it, help! How do I get passed it or fix it! I have tried holding the apple key and "s" and then type in the code to reset the password, but my keyboard is not letting me use the numbers or any keys that are accessed by holding shift! Please help me get passed this screen
Fluids and electronics do not mix.
You have caused some serious damage to parts of your computer, and likely voided the warranty until Apple completes a repair and re-certifies it.
Step one is to turn it off and do NOT (did I say do NOT yet?) turn it on again yourself.
Take it to an Apple store and be prepared for a large repair bill.
Sorry, but that is the truth. -
I need to use my iMac to run some Windows software not available for Mac and was thinking of obtaining Parrallels Desktop 9 to help with this. If I use Parrallels do you still have to partitian your drive and does this leave you open to viruses?
You do not have to partition your drive - Parallels creates a disk image which contains your Windows installation. You do have to exercise anti-virus measures in the Windows partition, although such malware cannot affect the Mac filesystem.
Matt -
When I try to install ios lion the installer says my hard drive has SMART errors and that I need to buy a new Hard Drive, but my computer witch has snowleprd and runs just fine.
SMART is a technology that monitors the drive for signs of impending failure. You can verify that SMART is indicating a problem in Disk Utility. Select the hard drive and look at the bottom of the window. It should look like this:
If the SMART status is not "Verified" then you should back up your drive and start shopping for a new one. -
My auto install for Premiere Elements failed and told me i needed to do a restart and try installing again. Having restarted my laptop, how do I install the software? There are two .exe files in the folder - oem and start-up. Which should i run?
thanksfor windows you should have an exe and a 7z file. put both in the same directory and double click the exe.
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'. -
Do i need a network card to install and run a local java web server
Friends,
Do i need a network card in my computer to install and run a local Java Web Server or any Web Server.network cards are only for connecting equipment together... you can set up a webserver without any more equipment than you have already! Indeed Tomcat... BUT you would be better off with apache for production stuff. It depends what you need to serve... if its mainly static pages (i guess it probably isn't) then apache will be enough by itself; but if you need to serve dynamic pages (JSP, Servlet blah blah) then you will need tomcat. Tomcat has it's own webserver and its perfectly ok for testing or low-load stuff, but you can integrate with Apache (a moderately compex task, but do-able, see tomcat-user forum off of apache site) for greater stability, and you don't have to show the port in the URL... Don't set up a webserver on any pc that contains stuff you don't want hacked into... it becomes very succeptible when the service is up...
-
Need to install and run Reports & Forms on Windows 98. Help!!
Hi guys !!
I need to install and run Oracle Reports & Forms on a Windows 98 OS. I can find the download of Reports & Forms for NT but I'm not sure if this download works on Win98 ?? Please help. Urgent.Hi guys !!
I need to install and run Oracle Reports & Forms on a Windows 98 OS. I can find the download of Reports & Forms for NT but I'm not sure if this download works on Win98 ?? Please help. Urgent. I am having the same problem, but with Windows ME. I was able to get Oracle 8i to work by entering a line in the Compatibility 95 section of my win.ini, and I installed the Forms & Reports for NT, but it won't see my database.
Maybe you are looking for
-
Purchase Order for Drop ship sales order
We are on version SAP ECC6 We are having issues with the delivery address of a drop ship sales order getting copied correctly into the Purchase Order/purchase requisition. The sales order is an sd and as the sales order is created on the partner sect
-
If I write the address in the bar Firefox says that the "connecting stopped", even if Internet is working, and i don't have any firewall that blocks sites. No proxy either. Help me!
-
Slider doesnt seem to be good scrubbar
So I have been attempting to use a hslider for a scrubbar using raw video and UIComponent in flex 2. Using the slider control as a seekbar doesnt seem efficient to the below. livedragging doesnt seem to work well because there are too many calls to s
-
Fire! Core dump in pthread_mutex_lock
Hi, All, Here is the pstack information from dbx. t@1 (l@1) terminated by signal SEGV (access to address exceeded protections) 0xfd90b258: locktry_adaptive : ldstub [%o0 + 12], %o1 (dbx) where current thread: t@1 =>[1] locktry_adaptive(0x10018, 0x208
-
How to check last log backup happend in sql server
Hi All, How to check last log backup happend in sql server Thanks in advance Shashikala