Portal Netweaver Administrator Logs
Hello,
I want to view the Administrator Logs on the Portal for which I am going to http://<host>:<port>/nwa, but then it says 'Select systems before proceeding' and no logs are displayed.
Please help.
Hello,
Please check whether your sld is started or not, and technical system is created.
to check sld go to http://host:port/sld, configure sld and create technical system.
Thanks,
Sagar Pande
Similar Messages
-
Unable to view Administrator Logs
Hello,
I am trying to view the Netweaver Administrator Logs to Troubleshoot a Runtime Error on Production Portal. But when I goto http:<host>:<port>/nwa -> Monitoring -> Logs And Traces , then I select Default Trace Option or Last 24 Hours Option in the Dropdown, it displays the Message : ' No records to display '. The same when I do for QA Portal it displays the Logs fine. What is missing for Prod. Portal which is not allowing to view the Logs.?
Any help would be highly Appreciated.
Thanks.Pls check with your basis team whether the configuration to write the logs and traces were configured. It will be st by default but there might be a chance to set it to "OFF". In that case you will not get any traces or logs.
Thanks,
Mahe -
When I log in the Portal using Administrator user, I can use it correctly.
I have created a Room IView.
When I log in the Portal using Administrator user, I can use it correctly. However when I am using another user, I get this error message:
com.sap.portal.pcm.Title
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/com.sap.ip.collaboration/Rooms/00a2953f-0d06-2a10-749d-afc6884d33a7/workset/com.sap.netweaver.coll.ProjectHome/relatedItems/DynamicNavigation/com.sap.netweaver.coll.ARoomQuickLaunch
Component Name : null
Page could not create the iView.
See the details for the exception ID in the log file
What should I do??
Regards
IkaHi Ika,
This seems to be a permission issue.
Go to the pcd and give read access to portal_content/com.sap.ip.collaboration/Rooms .
That should solve the problem.
Points are welcome if this helps
Rgrds
Vineeth -
Netweaver administration and SAP Web Application Server r the same?
Hi All,
I am a Basis Consultant & new to Netweaver,..
I am interested in Netweaver administration..
1.I am confused wheather netweaver administration and SAP Web Application Server r the same?(or WAS is just another component of Netweaver).
2.Do we need to administrate all the components of Netweaver(EP,BI,etc.,)seperately as an Netweaver Administrator?
Thanks in Advance ,
MaltiHi Malti,
You must first download and read this document and then read 'help.sap.com' for what is netweaver.
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e1515a37-0301-0010-b2bb-99780cb4cafa">Introduction to Web Application Server</a>
The above mentioned document is a crisp guide to what is WAS.
Further I got this from the sdn/netweaver webpage
SAP NetWeaver is a web-based, open integration and application platform that serves as the foundation for enterprise service-oriented architecture (enterprise SOA) and allows the integration and alignment of people, information, and business processes across business and technology boundaries. It utilizes open standards to enable integration with information and applications from almost any source or technology. SAP NetWeaver is the foundation of SAP xApps and mySAP Business Suite solutions, and also powers partner solutions and customer custom-built applications.
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/netweaver">SAP Netweaver SDN Page</a>
You have lots of reading to do now.. hope that helps
Regards,
Siddhesh -
Suggestion on Good Books for SAP NetWeaver Administrator
Hi,
I am very new to SAP NetWeaver. Can any one please suggest some good books to learn SAP NetWeaver Administration. Is SAP NetWeaver For Dummies is good book to start with?
I want to understand the SAP NetWeaver Architecture and also want to learn from SAP Basis administration/Consultant point of view. So which book can help?
Also I got to kmow, SAP NetWeaver includes the following components and tools:
Components:
SAP Auto-ID Infrastructure
SAP Business Intelligence
SAP Enterprise Portal
SAP Exchange Infrastructure
SAP Master Data Management
SAP Mobile Infrastructure
SAP Web Application Server
Tools
SAP Composite Application Framework
SAP NetWeaver Developer Studio
SAP Solution Manager
So from SAP Basis Consultant point of view, which Componet one should learn or focus on?
Appreciate help.
Thanks
Regards,
BasisCK.Hi Nitin,
Thanks for the reply. SAP R/3 Handbook, Third Edition - By Jose Antonio Hernandez, Franklin Martinez, James Keogh
~
Table of contents
Chapter 1: SAP: From SAP R/3 to SAP NetWeaver
Chapter 2: The Architecture of the SAP Web Application Server
Chapter 3: SAP NetWeaver: An Overview
Chapter 4: Using SAP Systems
Chapter 5: Upgrading to SAP R/3 Enterprise: The First Step into SAP NetWeaver
Chapter 6: The Change and Transport System
Chapter 7: Development Options with SAP Solutions: ABAP Engine
Chapter 8: User Management and Security in SAP Environments
Chapter 9: Web Application Server System Management
Chapter 10: Performance and Troubleshooting with SAP Solutions
Chapter 11: SAP for IT Managers: Implementation, Planning, Operation, and Support of SAP Systems
INDEX
~
Is this book completely talk about SAP NetWeaver or it's kind of transition/bridge from SAP R/3 to SAP netweaver?
Since you are experienced in Netweaver technology, can you suggest the step by step approach to be master in this?
I mean read this book first, then what next? what component I should go for it? XI, EP??
Appreciate your help and inputs.
God bless u.
Thx
Regards.
Basis CK. -
One user from AD is not visible in portal user administration
Hi,
one of our users defined in Active Directory is unable to log into the portal. We have Kerberos authentication.
I've checked this user is also not visible in portal user administration. The rest of the users are visible and are able to log in.
Any ideas what could be the cause?
Maybe some settings/attributes for this user on the Active Directory side could be the cause?
Regards,
LadislavHi,
Could you please check and confirm if the user,group path are the same for the
particular user on AD as that referred to by the portal. If not he would not be on the portal and
then there would not be kerberos too in place for him.
Rgds -
Hi SAP Gurus,
I am working as a Weblogic Application Server Administrator/Engineer for past 5 years. I want to make a career change and enter into SAP world. I want to stay in the Administration world though I have 5 years of Java development experience.
Recently I am doing some research and trying to understand SAP Basis Administration and SAP NetWeaver Administration. I understand that SAP Basis Administration is for previous R/3 Systems and NetWeaver is SAP New platform which replaces R/3 system.
I request to clarify above understanding if I am mistaken.
I have been looking at Job posting in NetWeaver administration and I get SAP Basis job posting reponses. I am confused with this ...
Should I learn both SAP Basis administration AND SAP NetWeaver Administration to enter into SAP Administration world
Can anyone shed some light on this
Thanks --GopalHi Gopal,
SAP Netweaver consist of 2 application platforms, The first one is the R/3 abap system (this is where the Basis come from) and the second one is the J2EE that serve as platform for the SAP Enterprise Portal.
Basically a good Netweaver administration should have good knowledge about both.
Follow the link for the product description
http://www.sap.com/platform/netweaver/pdf/BWP_OV_SAP_NetWeaver.pdf
Hope this help
Juan
Please reward points if helpful -
Netweaver Administrator - Enable Debugging
In the Netweaver Administrator web console, we want to enable debugging (System Mgmt > Administration > Systems. For some reason, the 'Enable Debugging' button is greyed out for the J2EE server process. Have you seen this before?
Sorry BOB..I didnt see this message.
You can enable debugging from visual admin:
Logon with Visual Administrator ->Server->Services ->u2022 Go to Configuration Adapter:->u2022 On Display Configuration go to: cluster_data -> Propertysheet instance
->Switch between Display Mode or change ->->Double-click on u201CProperty sheet instanceu201D opens:
Make sure the DebugMode is set to u201Cyesu201D to debug the portal.
You can specify the port here....and siable debugging on some nodes (as per need)
regards,
hemanth -
Unlock Models with "NetWeaver Administrator"?
Hello,
I have a question regarding "Unlocking" of models.
There are two models I am not able to unlock using the "Unlock Models..."-Button within the Visual Composer. I <b>know</b> there is the option to unlock the models somehow using the "Visual Administrator".
I know from the Blog "Logs and Trace for Visual Composer" (by Luis Felipe Lanz), that the Visual Administrator will be replaced by the NetWeaver Administrator.
For this reason (and because of the fact that I don't have access to the "Visual Administrator") I would like to know <u>how</u> and <u>where</u> using the "NetWeaver Administrator" can I unlock VC-models?
Best regards
MarkDear Dr. Herger,
I am very sorry, but maybe I am not able to formulate my question in a way it can be understood.
I am totally aware how to unlock files within the Visual Composer. It works in general, so my conclusion is that I have the proper rights. As I have already mentioned before, the models, which I cannot unlock, where created by myself.
I pointed out that my second model -which is not presented within the Unlock-field of the Visual Composer- cannot be deleted by myself, because the machine tells me, I am locking it, which is not the case (the file is not open).
My conclusion is, that something went wrong when the system crashed, which happens from time to time.
So I came to the conclusion that another way is necessary to unlock those models. I know that there is an option via the Visual Administrator. But I don't have access to that. Our Administrators told me, that I am not able to access it via my client/notebook.
Because the Visual Administrator is going to be replaced by the "NetWeaver Administrator", I wonder, if and if yes where can I UNLOCK models within the "NetWeaverAdministrator".
With Best Regards
Mark -
Reset the password for the netweaver administrator
Using the netweaver administrator and trying to log in using a user 'administrator' it seems that the user is locked
We have the ABAP stack and i have administration rights with my user in SU01. How do i unlock that user or creater another administrator-user for the NW administrator?
ThanksNot sure if your ABAP system is the same and has the same database like your java system.
On dual stack systems this user is usually named j2ee_admin while administrator is an indication this is a java stack only system?!
If dual stack you can simply add another user in SU01 with sap_j2ee_admin role.
If java stack only you'll need another user with admin privilege or you'll have to use the config tool to reset the password. -
Beginners guide for netweaver administration
hi ,
i m a basis administrator . next month they r going to put me in a project where xi is implemented .
gurus what are the url's which guides for the sap xi administration
i m very new to xi...so can you also please say me what would be the job role for xiadministrator ?
is that very different from basisrole ?
also if possible guide me for netweaver administration ...
thanks in advanceFirst... download and digest the PI/XI Installation guide from SAP Marketplace.
Then, you can go to the Exchange Infrastructure forum and search there as they have millions of threads like these one.
Regards
Juan -
How to start with netweaver administration
Hello
i am new to sap netweaver administration, can anyone advise me how to kick start with sap netweaver administration. My background is webdynpro java.
NageenHello ,
Please refer the thread , you will get the all the necessary links .
SAP Netweaver documents needed
Re: Netweaver administration material needed
Regards ,
Santosh Karadkar -
HOW to configure Microsoft office in my SAP portal netweaver 7.3
Hello Experts,
Can any one tell me how can I configure my microsoft outlook to my Portal netweaver 7.3...??
Regards,
SumitHi Sumit,
This help.sap link explains your scenario:
Integrating MS Exchange Outlook Thick Client Using OWA - Collaboration - SAP Library
I hope it helps.
Regards,
Serhat -
SLD is not accessible in our Netweaver Administrator
Hi,
Do u know why the SLD is not accessible in our SAP Netweaver Administrator? What steps should be taken to solve this problem?
Please help.
Thanks,
JennahHello Jennah ,
To resolve issue :
Please check the sld data supplier is running or not ?
<b><u>Setting Up the SLD Data Supplier (J2EE):</u></b>
<b>http://help.sap.com/saphelp_nw04/helpdata/en/ea/cd2e807e0e45bf9da67354f452fc05/frameset.htm</b>
http://help.sap.com/saphelp_nw04/helpdata/en/c9/dc37520bdf4b48bb8f6d4329f073d5/frameset.htm
Regards ,
Santosh -
No TACACS+ Administration Logging on ACS
I can get a csv file created for a TACACS+ Administration log/report [configured in Interface Logging of the ACS] but that log file is is empty. Help states that aaa accounting commands start-stop TACACS+ must appear in the access server or router configuration file in order to capture this day but my ASA 5520 will only allow;
aaa accounting command <server group> or <privilege>.
How do I get this ASA and Windows ACS to collect TACACS+ administration?
Note: My TACACS+ accounting does collect data on users ssh into the ASA.It's quite possible that you might be experiencing a know bug ( CSCsg97429 ) in ACS version 4.1.
Get this Patch: Acs-4.1.1.23.5-SW.zip. It fixes the TACACS+ Administration log/report problem.
You rigth in regards to the command. It is needed for your NAS to send accounting information to the ACS.
Here's an example of the commands:
aaa accounting exec default start-stop group tacacs+
aaa accounting commands 15 default start-stop group tacacs+
Hope it helps.
Maybe you are looking for
-
While doing a routine sync on my ipod, an error 13019 came up.
I tried syncing without music by clicking the music tab and unclicking music. that didn't work. i did this for every category and have determined that it is my music that has the problem. I also updated itunes today too so that is not the problem. i'
-
Using Adobe Interactive Form in Retails, manufacturing industries??
Hi, I am a systems integrator solution provider and have a few customers from retails, manufacturing and supply chain industries. They want to design label with barcodes (such as those SSCC label for shipping). Which SAP solution is the best and most
-
Auto disappearing content using Refresh header?
Hi, We're pushing a CiscoIPPhoneExecute to a phone. The phone requests the page (CiscoIPPhoneText) in the execute request. The requested page needs to allow the user to respond to a question. If the user doesn't answer to the question, the question s
-
Too many objects in overview screen- Cost center budget
Hey Guys I am trying to upload cost center budget with help of form based kp06. The system throws error that i cannot post more than 9999 cells at one time. is there a any workaround this? Thanks Ankur
-
Unable to sync bluetooth to ipod touch
I am unable to sync samsung bluetooth SBH650 with my ipod touch. Please help???