Portal not picking up changes from query view in analyzer
Hello All,
If I change a query view in analyzer, the changes are not being picked up in the portal unless i restart the portal, therefore clearing the cache. Is there away of clearing the portal cache without a restart? I am aware of a few ways to clear navigation cache and PCD cache, but this does not solve my issue. Also I have cleared the query cache through RSRT but this makes no difference.
Any suggestions apprecaited.
Thanks,
Nick
Hi ,
This is due to the query cache not getting updated for portal
view this problem can be solved by only refreshing the query
and u can get the help of basis people if there are anyother
way for this .
Assigning points is the way of saying thanks in SDN
Regards ,
Subash Balakrishnan
Similar Messages
-
ADG is not picking up changes from this getter
My ADG is not picking up changes from this getter, is it because the whole class needs to implement IEventDispatcher ?
<mx:AdvancedDataGridColumn headerText="Delete" dataField="reviewDate" visible="{userModel.loggedInUser.deleteReview}" id="deleteColumn">
UserModel.as
[Bindable(event="propertyChange")]
public function get loggedInUser():User
return _LoggedInUser;
public function set loggedInUser(value:User):void
_LoggedInUser = value;
//loggedInUserModified.dispatch();
eventDispatcher.dispatchEvent (new Event ("propertyChange"));Hi ,
This is due to the query cache not getting updated for portal
view this problem can be solved by only refreshing the query
and u can get the help of basis people if there are anyother
way for this .
Assigning points is the way of saying thanks in SDN
Regards ,
Subash Balakrishnan -
I am running
Windows 7 64 bit
Access 2010 32 bit
Developing an application with a split FE BE with both files local but continue to have the message "Not Responding" when switching from forms view to design view and back as well as if I try to connect to a subform or object on the sub form.I have seen this behavior when the form's RecordSource is a complex query such as a crosstab or a query with several nested queries. To test if this is your case, remove the RecordSource and see if the form starts acting normal again.
Then again, if the form has several subforms they might be slowing up the loading time.
Bill Mosca
www.thatlldoit.com
http://tech.groups.yahoo.com/group/MS_Access_Professionals -
Portal not picking up changes to my .shell
Hi,
I added a header to the default headerFooter.shell a while ago. I could never
get it to show up in my portal and I finally gave up. I know Merlin died a while
ago so I don't think it is magic but I came in a few days later started my IDE
and low and behold my header was showing up all of the sudden. Now I want to
add a footer. I modified the same headerFooter.shell and I can not get the stupid
thing to show up. I tried cleaning the app, rebuilding the app, stopping and
starting the server. and even bumping the IDE none of which worked. What would
be really cool is if I could just drag a .jsp file from the application window
into my header or footer and have it show up. Anyone out there ever have this
problem before?
Thanks,
Johnnot sure whats going on, but let me explain how the .shell files work and maybe
this will help.
the markup from the .shell file is copied into the .portal file when you create
a new portal.
when you change the markup in the .shell file the IDE should refresh the markup
in the .portal file to relfect the changes you made in the .shell file. I think
this is not happening,
to verify this view your .portal file as XML or open up in wordpad and check to
see if the changes you made in your .shell file made it into the .portal file
(since you are making changes to the footer these changes should be at the bottom
of the .portal file)
If the changes did not make it in try the following:
1) changing shells in the IDE to an old one - save - and then back to your new
one - save
2) or just manually copy the markup into your .protal file
Note when you 'disassemble' the portal in the Admin tools (create a desktop from
a .portal file)
The markup in the .shell file will be used not the markup in the .portal file
(these should be the same though). The disassembler uses the 'markupName' attribute
in the .portal file to match with the markupName attribute in the .shell file.
hope this helps.
OBTW - for the next release we are planning on allowing you to drop .jsp, .jpf,
.pinc file into the shell from the IDE.
"John Hundley" <[email protected]> wrote:
>
None of your suggestions worked. There is no folder with the same name
as my computer.
Please I want to throw somthing!!!!!!
"Khurram Zafar" <[email protected]> wrote:
I have noticed that sometimes, a property set in the property sheetin
workshop
doesn't get written to the underlying file and I have had to manually
go and write
the element to the xml file. I don't recall exactly which ones those
are. Try
one of these:
1. Check that the property actually got written to the xml file, inyour
case
headerfooter.shell
2. Try to make a change to a portal property as well, like setting the
look and
feel to classic from default or vice versa to get the server to reload
all the
framework related changes. If that doesn't work, and you have triedbouncing
the
workshop and the server, then:
3. On your development machine, in your <domain name> folder there should
be a
folder named the same as the machine name you are working on. That has
some cached
files and data. Rename that folder to another name, shut down your server
and
restart. It should work now.
Cheers
Khurram
"John Hundley" <[email protected]> wrote:
Hi,
I added a header to the default headerFooter.shell a while ago. I
could
never
get it to show up in my portal and I finally gave up. I know Merlin
died a while
ago so I don't think it is magic but I came in a few days later started
my IDE
and low and behold my header was showing up all of the sudden. NowI
want to
add a footer. I modified the same headerFooter.shell and I can notget
the stupid
thing to show up. I tried cleaning the app, rebuilding the app, stopping
and
starting the server. and even bumping the IDE none of which worked.
What would
be really cool is if I could just drag a .jsp file from the application
window
into my header or footer and have it show up. Anyone out there ever
have this
problem before?
Thanks,
John -
Sender file adapter is not picking the file from windows server
Hi Experts,
We have a sender file adapter running on Unix server. Now we have changed the source directory path from Unix to Windows in file access parameters. It is not picking the files from windows directory and not showing any error.
In this scenario, input file for sender adapter is *.xml and no content conversion.
Could any one please let me know is there anything needs to changed in file adapter.
Thanks in advance,
Sridhar. MSridhar,
What do you have in the directory path?
If it is a shared drive in unix then the directory in windows should also be a shared drive from XI system. Else if it is FTP check the address.
Regards,
---Satish -
System is not picking up approvers from BADI in Item level workflow
Hi All,
My problem is that
1. when I creat the shopping cart the system is picking up the correct approver from BADI and showing it in approval preview.
2. My first level approver is a general task so Workitem going to the correct persons.
3. after first level approver I am fillng approver in BADI for 2 nd level.
4. But after first approval the SC is directly getting approved finally as system is not picking up approvers from the BADI.
I dont understand the problem. even We applied SP9 as well, but the problem is not resolved.
Please suggest something.
Thanks
SmitaHi ,
I am pasting the code of my BADI. Let me know if i need to do some changes.
Regards,
smita
if lv_wf = '4'.
1st approval step executed for indices 1 and 0
IF actual_approval_index LE 1.
First approval step (General task)
endif.
2. approval step executed for indices 2,1 and 0
IF actual_approval_index LE 2.
*break-point.
**get the approver for the commodity
LOOP AT lt_item INTO ls_item WHERE del_ind IS INITIAL.
We consider only items, which are not deleted (del_ind = 'X')
Set the product category
MOVE ls_item-category_id TO lv_call_value1.
Find the approver of this item based on the customizing table ZCOMMODITY
CALL FUNCTION 'ZWF_COMODITY_ITEM_APPROVAL_GET'
EXPORTING
SC_GUID = ls_header-guid
ITEM_GUID = ls_item-guid
APPROVAL_DESCRIPTION =
HIDE_ITEMS_NOT_RESPONSIBLE = 'X'
CRITERION1 = 'COMMODITY'
CATEGORY_ID = ls_item-category_id
ITEM_VALUE = ls_item-VALUE
APPROVAL_INDEX = '2'
CHANGING
APPROVAL_TABLE = approval_table
ITEM_APPROVAL_TABLE = item_approval_table
ITEM_APPROVAL_OBJ = item_approval_obj
endloop.
*ELSEIF actual_approval_index EQ 2.
don't process 2nd step
no_further_approval_needed = 'X'.
endif.
endif. " if lv_wf = '4'.
FUNCTION ZWF_COMODITY_ITEM_APPROVAL_GET.
""Local Interface:
*" IMPORTING
*" VALUE(SC_GUID) TYPE BBP_GUID
*" VALUE(ITEM_GUID) TYPE BBP_GUID
*" VALUE(APPROVAL_DESCRIPTION) TYPE BBP_STEP_DESCRIPTION OPTIONAL
*" VALUE(HIDE_ITEMS_NOT_RESPONSIBLE) TYPE BOOLEAN OPTIONAL
*" REFERENCE(CRITERION1) TYPE BBP_WFL_APP_CRITERION
*" VALUE(CATEGORY_ID) TYPE ZBBP_CATEGORY_ID
*" VALUE(ITEM_VALUE) TYPE BBP_VALUE
*" VALUE(APPROVAL_INDEX) TYPE SWH_NUMC10
*" CHANGING
*" REFERENCE(APPROVAL_TABLE) TYPE BBPT_WFL_APPROVAL_TABLE_BADI
*" REFERENCE(ITEM_APPROVAL_TABLE) TYPE BBPT_WFL_ITEM_APPROVAL_BADI
*" REFERENCE(ITEM_APPROVAL_OBJ) TYPE BBPT_WFL_ITEM_APPROVAL_OBJ
*" OPTIONAL
this Function Module is for getting the commodity approvers
for the commodity items, in the Shopping cart
DATA:
ls_approval_table TYPE bbp_wfl_approval_table_badi,
ls_item_approval_table TYPE bbps_wfl_item_approval,
ls_approval_def TYPE bbpt_wfl_lia_def,
ls_item_approval_obj TYPE BBPS_WFL_ITEM_APPROVAL_OBJ.
DATA:
lv_app_obj_guid TYPE bbp_guid_32,
lv_is_new_approval_object TYPE boolean.
**structure for commodity data
data : ls_commodity type zcommodity.
data : lv_value1 type BBP_WFL_APP_PROPERTY.
CONSTANTS:
c_agent_is_user TYPE otype VALUE 'US'.
First find the right approval object the item belongs to.
All items of an approval object are approved togheter in
this approval step, and therefore only one workitem is
created for this items. IF possible use this standard function
BBP_WFL_DIN_APP_OBJ_GET for creating the approval object.
lv_value1 = category_id.
CALL FUNCTION 'BBP_WFL_DIN_APP_OBJ_GET'
EXPORTING
SC_GUID = sc_guid
CRITERION1 = criterion1
CRITERION2 = ''
CRITERION3 = ''
VALUE1 = lv_value1
VALUE2 = ''
VALUE3 = ''
IMPORTING
APPROVAL_OBJ_GUID = lv_app_obj_guid
IS_NEW_APPROVAL_OBJECT =
TABLES
ITEM_APP_OBJ = item_approval_obj
CALL FUNCTION 'BBP_WFL_DIN_APP_OBJ_GET'
EXPORTING
SC_GUID = sc_guid
CRITERION1 = criterion1
CRITERION2 = ''
CRITERION3 = ''
VALUE1 = lv_value1
VALUE2 = ''
VALUE3 = ''
IV_ITEM_VALUE = ITEM_VALUE
IMPORTING
APPROVAL_OBJ_GUID = lv_app_obj_guid
IS_NEW_APPROVAL_OBJECT =
TABLES
ITEM_APP_OBJ = item_approval_obj.
CALL FUNCTION 'BBP_WFL_DIN_APP_OBJ_GET'
EXPORTING
sc_guid = sc_guid
criterion1 = criterion1
CRITERION2 = ''
CRITERION3 = ''
value1 = category_id
VALUE2 = ''
VALUE3 = ''
IMPORTING
If 2 items of the same shopping cart have the same
values for the criterias, this function returns the
same (!!!) approval object guid
approval_obj_guid = lv_app_obj_guid
TABLES
This table saves the criterias for which the approval object
was created. For example:
|approval object1| "cost center" | 1000 |
|approval object2| "cost center" | 1200 |
|approval object3| "prod categ " | office |
item_app_obj = item_approval_obj
Check if this approval object already exists in the approval
table
READ TABLE approval_table INTO ls_approval_table
WITH KEY approval_object_guid = lv_app_obj_guid
approval_index = approval_index.
IF sy-subrc EQ 4.
lv_is_new_approval_object = 'X'.
ENDIF.
IF lv_is_new_approval_object = 'X'.
Now read your own approval table based on your criteria's
**now check whether the category id is a commodity material and
*find the responsible person for that and
*check if the amount of item is falling in the approval limit of the comodity manager
select single * from zcommodity into ls_commodity
where CATEGORY_ID = category_id
and ( ZFROMAMT <= item_value and ZTOAMT >= item_value ).
SELECT * FROM bbpt_wfl_lia_def
INTO CORRESPONDING FIELDS OF ls_approval_def
WHERE
app_crit_name1 = criterion1 AND
app_crit_value1 = value1
ENDSELECT.
IF sy-subrc NE 4.
Fill approval table (who is responsible for which approval
object in which approval step)
ls_approval_table-approval_index = approval_index.
CONCATENATE c_agent_is_user ls_approval_def-approval_agent1
INTO ls_approval_table-approval_agent.
CONCATENATE c_agent_is_user ls_commodity-person
INTO ls_approval_table-approval_agent.
ls_approval_table-name = ls_commodity-name.
ls_approval_table-approval_description = approval_description.
ls_approval_table-approval_object_guid = lv_app_obj_guid.
ls_approval_table-hide_items_not_responsible =
hide_items_not_responsible.
APPEND ls_approval_table TO approval_table.
IF ls_approval_def-approval_agent2 IS NOT INITIAL.
Second approver for the same workitem exists
CONCATENATE c_agent_is_user ls_approval_def-approval_agent2
INTO ls_approval_table-approval_agent.
ls_approval_table-name = ls_approval_def-agent_string2.
APPEND ls_approval_table TO approval_table.
ENDIF.
ENDIF.
ENDIF.
Fill item table (Which items belongs to which approval object)
ls_item_approval_table-approval_object_guid = lv_app_obj_guid.
ls_item_approval_table-approval_item_guid = item_guid.
APPEND ls_item_approval_table TO item_approval_table.
**Fill Item approval object
ls_item_approval_obj-sc_guid = sc_guid.
ls_item_approval_obj-APP_CRIT_NAME1 = CRITERION1.
ls_item_approval_obj-APP_CRIT_VALUE1 = CATEGORY_ID.
ls_item_approval_obj-APPROVAL_OBJECT_GUID = lv_app_obj_guid.
append ls_item_approval_obj to ITEM_APPROVAL_OBJ. -
My Macbook Air does not pick up wifi from Airport but iMac, iPad and iPhone do. Help please.
Are you testing in the same room as the TC?
Power cycle the TC.. does it show up now?
Has it ever showed up .. ie is this a problem that just started from an existing setup, or has never worked?
Is the TC new? If old how old?
If you continue to have issues.. setup the TC from iMac and preferably using ethernet.
Change the wireless names to SMB compatible ones, short no spaces, pure alphanumeric.
Use WPA2 Personal security only.
Then set the wireless channels manually.. try 11, 6, 1 for 2.4ghz and try 36 or 40 at 5ghz.
Tell us how that goes. -
I have moved from the US to Norway, and want to change my apple ID to the Norwegian appstore. However, I am not allowed ot change from the US store before I use up my balance, which is 0.17 dollar. The problem is that nothing costs 0.17 dollar and I do no longer have an american visa card, only Norwegian. Is there any way I can erase the credit on my account so I can change the appstore country? Or osmething I can use this credit on? Thank you very much
Try contacting the store support staff at: http://www.apple.com/emea/support/itunes/contact.html they are usually pretty good at sorting out these issues.
-
In J1IS system is not picking net value from PO automatically
Dear Experts,
I want to send rejected material to vendor back, so I have done return delivery against MIGO material document, in MIGO, in Excise Invoice Tab i have selected no exicse Entry document. At the time of J1IS sytem is not picking net value from PO. This field is editable. Our requirement is, system should pick net value from PO.
In this case I am not makeing any RETURN PO
Could any body guide me? Is there any configuration required?
Thanks & Regards,
Trupti.There is no link between p.o & excise inv. creation using J1IS.
In J1IS,Enter return material document no,Ref doc. type - MATD,Doc Year,series group,excise group,series group & finally vendor in selection.
In excise invoice automatically details like material code,qty will appear.
You need to enter assesable value & excise duties manually.
Note :
Be cautious while entereing excise duties bcoz you may be returning partial quantity to vendor,
so calculate excise duties in a seperate excel sheet before entering it in J1IS. -
XI is not picking the file from source dir after exported from DEV to QA
Hi Experts,
We have moved one XI object from Dev to QA. It was working fine Dev but in QA XI system not picking the file from the source directory.
I have checked Communication Channel monitoring and receiver determiniation everything is fine. But still it is not picking the file.
Could you please help us.
Regards
SowmyaHi
We have used the CMS to transport XI objects. Everything has been configured automatically. I checked all the configuration and everthing seems to be fine.
Could you please give any more suggestions.
Regards
Sowmya -
JMS sender adapter is not picking up message from MQ
Hi Experts,
I have configured the JMS sender adapter for getting message from Websphere MQ. In RWB the adapter and the communicaiton channel all looking good. The trace file tells me the connection to the queue has been established.
But the problem is this JMS sender adapter is not picking up message from the Queue defined on the MQ site.
Any Idea what could be wrong?
Thanks!
Jason
JasonHi,
1) Can you activate the JMS adapter again ( edit save and activate it )
2) Check whether the right Queue is addressed.
Regards
Agasthuri Doss -
Sender JMS Synchronous communication channel not picking up files from JMS
Hello,
One of our Sender JMS synchronous communication channel (used Sync/Async bridge in the module section to make it Synchronous) is not picking up files from JMS system though the channel looks to be active (greeen).
When I am trying to stop the channel, it is giving error as "1 of 1 administered and selected channels have not been stopped", and after this when I start the cannel again it shows green but not picking up any files.
if anyone is haivng any solution for this, please reply back.
Thanks in advance.Messages available in JMS system? please check queue's if message were there and it is not picking up then some thing wrong with cc.
simple solution create new communication channel with same details and try to use the same. -
WRT54GX2 does not pick up time from the network...
I have a WRT54GX2 running firmware 1.01.14 and it does not pick up time from the network. I have PacBell (now AT&T) as an ISP and a DSL link. My old Netgear router picks up the time immediately. I am trying to figure out if I have a defective unit or if this is a firmware bug. Without the time, I can not use any of the scheduling functions, nor measure uptime.
Does anyone have this router with the time working? I have set the appropriate time zone.
Thanks,
Martinmneiman wrote:
Thanks for you ideas.
The backup file appears to be binary. However in searching through it I did see 3 time related text strings, namely: clock.stdtime.gov.tw, time-b.nist.gov and time.nist.gov. I can successfully ping clock.stdtime.gov.tw and time.nist.gov. This reinforces my belief that my ISP (AT&T nee PacBell) is not blocking access.
however ntp works on TCP port 123. ping works on udp 7 afaik. if your old netgear works i guess this is a router problem.
have you reset the router yet? afaik press reset button for 10 seconds.
you will however loose all settings and need to enter them again. it may however fix the issue.Message Edited by linksysinfo on 07-09-2006 03:09 AM
Regards Simon
NAS: TS-459 Pro - 3.6.1 Build0302T - 4 x 1TB Samsung HD103SJ : EXT4 - APC ES 700VA UPS
QPKG: WordPress 3.4, TwonkyMedia 6.0.39 QPKG - Zenphoto1.4.2.1 [7802] - phpMyAdmin v3.3.10
Network: Netgear DG834G V4.01.40 - DGTeam Rev. 0849 -> Cisco RV220W 1.0.4.13, Cisco SLM2008, Dlink DSM-520, Xbox360 -
Opened Notes and screen changed from listing my notes to no notes. How do I recover the missing notes?
Would you please explain how you did this? Most of my Notes dissapeared after the latest update. I tried restoring them from TM, but nothing shows up and QuickLook only shows (null). I took them from the IMAPnote file under (eventually) CoreData (~Library/Containers...), but that is not working for me. My Notes are synced with iCloud, so my solution may be different from yours.
Thank you. -
Bex request can not collect the change of query
HI every one:
Bex request can not collect the change of query automatically ,eventhough This query has ben transport before and have the same dev class with the Bex request.
when I press the button to save the change of query , a dialog was pop up to let me assign one request to this query.
who can help me ?! thanks alot!
Best regard
davidHi David,
already previous request is transported to Q or P....so when ever u try to change the existing query in BI.. the assigned request is not available in 'D'. so its asking to assign a request. for this
go to transport connection in Admin Workbench>there in right top u willl find a transport symbol for bex> click that for creating a request for bex queries--> after creating that request try to open ur query and do necessary modifications, what ever the modifications you do will come under this newly created request.
reply back if u have any questions
Thanks and Regards
Ajay .D
Maybe you are looking for
-
Using User Defined Function in BO XI3.1 Universe
Hi Everyone, Is it possible to call a database defined function in a universe? I would like to create a universe object to call the function then make the object available to users as a dimension when creating reports. If it's possible, can someon
-
Spry drop down menu not lining up
I'm using a Spry drop down menu across the top of my webpage but can't seem to get all the boxes to line up. For example, my menu bar currently looks somewhat like this: Home About Staff Links All o
-
Payroll: Impact of Infotype Delimits.
Hi Gurus, Currently i am working on assignment (From Employee Resignation to Full & Final settlement). I have a query: Is that possible to run the payroll when i delimit the IT. Say: I want to issue the full & Final Settlement. If i delimit the infot
-
Upgrading from 8.1.3 to 8.1.4
I downloaded AdbeRdr813_en_US.exe and then extracted it.. once i had the msi, cab etc..i edited the msi using adobe 8 cust wizard and customized some settings. I also downloaded AdbeRdrUpd814_all_incr.msp.. so when i ran my customized install of 8.1.
-
2 Question: Check mail on launch/Save Attachments
Hello all. I have 2 Questions about Mail 2.0.5 in Tiger: 1.Start Checking Mail upon Launch I have set Mail to check for new mail every 5 minutes, but everytime when I first launch Mail, I have to manually click on 'Get Mail' for the 1st email check,