Portal OWA iView logon popup issue

Hello,
I have configured web outlook (owa) access via iView and everything is working fine, except that the user is seeing logon popup every time when the new browser session is started. Our portal is only used within intranet environment. Is there way to suppress this logon popup?
Thanks,
Alex

We have looked at the logs on exchange server and see the following info:
15:59:28 9028/8308 E getAccountFromCookie: Ticket is NOT valid
15:59:28 9028/8308 E getAccountFromCookie: Validation Error: invalid.
15:59:28 9028/9248 E getAccountFromCookie: Ticket is NOT valid
15:59:28 9028/9248 E getAccountFromCookie: Validation Error: invalid.
Does anyone know what could be the problem?
Thanks,
Alex

Similar Messages

WAS Logon Popup issue for BW Report iview

Hi
I created a BW Report iview and mapped with the SAP BW System,
Every time user logon to Portal, and executing BW Report iview, it is asking for WAS Logon.
I created a system with this user credentials
ITS
ITS Description : BI_PRD
ITS Host Name : biprdn.xxxxx.com:8000
ITS Path            : scripts/wgate/webgui/!
ITS Protocol     : http
WAS
Web AS Description : BW_PRD_WAS
Web AS Host Name : biprdn:8000
Web AS Path           : /sap/bw/bex
Web AS Protocol      : http
Connector
Application Host     : 10.20.0.8
Gateway Host     :
Gateway Service       :
Logical System Name : BWPCLNT200
Remote Host Type     : 3
SAP Client     : 200
SAP System ID (SID) : BWP
SAP System Number     : 00
Server Port     : 3200
System Type     : SAP_BW
User Management
Logon Method     : UIDPW
User Mapping Type     : admin,user
Pls can any one solve this issue which i am facing.
Regards
Srikanth

Hi Achim
Thanks for ur reply
After changing Web AS Host Name and Application Host to FCDN, still i am getting that WAS Popup for logon.
And for SSO we are using UIDPW method for user mapping.
Acutally BW Report iview is connecting to the backend system and showing the report in Portal,
But they are some Drop down list boxes in that report when i am choosing some value to display, WAS Popup for logon is comming no the screen.
Regards
Srikanth
Srikanth A

OWA iViews and EP - configuration problem

Hi All,
since EP60 SP2 P3 HF3 there are several OWA iViews under
Collaboration folder. According to SAP note 739911 alias of portal
user and exchange user (or exchange mailbox) MUST be identical to
connect to OWA.
Using Application Integrator "HOW TO..." I've tried to break this
condition above. But it does not work OK.
1. I've created Exchange system with UIDPWD logon method
2. I've mapped portal login with exchange login (in my case these are
not identical...)
In OWA iView Calendar:
3. I've set property system to above created system
4. I've set property URL Template to
http://owa.orion.myorg.org:81/Exchange/<Authentication>
5. I've set property "URL template fraction for user mapping" to <MappedUser>/Calendar/?cmd=contents
Test user has: Portal login: test ; exchange login:test_exchange
Preview is blank. But...when I saw properties of page link to OWA was
correct:
http://owa.orion.myorg.org:81/Exchange/test_exchange/Calendar.
When I copied this link to new window -> result was OK.
Where is the problem?

Hi Eric,
I think I've found the solution.
1) Download the com.sap.portal.appintegrator.sap
2) Inside .par file try to find:
    PORTAL-INF\portalapp.xml
3) Add extra lines:
     
     <property name="RequestMethod" value="GET">
        <property name="personalization" value="none"/>
        <property name="inheritance" value="final"/>
        </property>
under G E N E R I C part of file.
4) Find PORTAL-INF\Property\Generic\SSO-Layer.properties
5) Add at the end of file extra lines:
RequestMethod
   #RequestMethod = <no value>
   RequestMethod.type=select[GET,POST]
   RequestMethod.default=GET
6) Using Support>Administration Console upload .par file again into EP.
7) Check the result of OWA iView preview.
In my case it helped!
Regards,
Marek

Portal Transaction iView not opening in browser but its open in R/3 screen

Hi
I have 2 senario.
First Scenario:
I login only into the portal and not login into R/3. I could access the portal transaction iview in the new broser portal window. And this is the expected behaviour.
second senario
I login into Portal as well as R/3 through SAP logon Pad (SAP GUI).
Now if I access Transaction Iview through portal , this transaction Iview is opened in R/3 side window not in portal browser window .And also same time we can see only new blank portal window iopen n portal side.
My question is that whichever transaction iView we access through portal we want to see that transaction iView in portal browser window like in first senario not in R/3 window.
Please help me to resolve this problem
Regards
Ruturaj

Hi Shanti
Thanks for replying.
The problem is that when our user trying to do same things in our system with his credentials means UID and PWD its working fine.But when he do the same things in his system with his credentials problem occured as per the senario 2.
This problem is not only that user but also whole their team member.
Regardfs
Ruturaj
Edited by: Ruturaj Inamdar on Sep 15, 2011 9:20 AM
Edited by: Ruturaj Inamdar on Sep 15, 2011 9:25 AM

Portal Activity iview error

Hi Experts,
I am not getting the actual output when i trigerred Portal Activity iview......
For ex: If I am looking for Number of logged in users .....it always shows Zero.......
Even for the number of entries made in iview..getting the same value zero.......
Please throw some clue on this issue.
Higher points rewarded for the valuable inputs
Thanks in Advance,
Dharani

Hi Dharani,
What version are you working in? There were significant changes around SP15 in 2004.
Why you may not see data:
Data collection service is off
Data aggregation application is not installed or running
You have selected a period of time that has not been aggregated (like you want all logins for 10-noon today, with hourly interval, but this period has not completed. You will see zero.
Start by checking the database tables starting with WCR_ and see if there is in fact data.
Hope this helps.
Daniel

Portal favorites Iview Displaying twice in detailed navigation iview

Hi All,
I am facing one issue in portal...
In all the roles Portal Favorites Ivew is displaying twice in the detailed navigation iview. And the options in the Iview are different like details, refresh, Open a new window....
I have only one default framework assigned to my desktop....
I cldnot trace out which is causing this issue...
Could someone adivse me on this...?
Thanks & regards
Sireesha.

Hi Munna,
This is the PCD-PATH of the second portal Favorites Iview.
Portal Component: com.sap.km.cm.navigation
Object ID:
fpn:DJP_FPN_JAVA/pcd:portal_content/SCOPP/RENAULT_Administration/SCOPP_DISPLAY/SCOPP_CCTS_Desktop/frameworkPages/SCOPP_CCTS.frameworkpage/com.sap.portal.innerpage/com.sap.km.PortalFavorites_0:rn4p6qvmOIw3xqr6ngdRBQ%3D%3D:1:
Regards
Sireesha.

Exchange 2013 ECP Login fails HTTP 404 Requested URL: /owa/auth/logon.aspx

Hi,
One of our Exchange servers stopped allowing access to OWA and ECP. I have now managed to get OWA working but ECP is still failing. When connecting to ECP using https://servername/ecp/ it asks me for my username and password. After hitting enter it shows
me an error page:
Server Error in '/owa' Application.
The resource cannot be found.
Description: HTTP 404. The resource you are looking for (or one of its dependencies) could have been removed, had its name changed, or is temporarily unavailable. Please review the following URL and make sure that it is spelled correctly.
Requested URL: /owa/auth/logon.aspx
URL in the address bar while on this screen: https://exchangeserver:444/owa/auth/logon.aspx?url=https://exchangeservera:444/ecp/&reason=0
Question: When the URL points to servername:444/owa/auth/logon.aspx - Is it trying to find the logon.aspx in C:\Program Files\Microsoft\Exchange Server\V15\ClientAccess\Owa\auth? There is no such file in that directory?
I have removed and recreated the ECP and OWA virtual directories several times.
I am trying to login using a domain administrator account.
Thanks,

Hi,
Is there any Exchange server 2010 coexistence with your Exchange 2013 server? If it is, please try the URL
https://CAS15-NA/ecp?ExchClientVer=15 to access ECP.
Also run the following to check your OWA and ECP virtual directories:
Get-EcpVirtualDirectory -ShowMailboxVirtualDirectories | FL Identity,*Authentication*
Get-OwaVirtualDirectory -ShowMailboxVirtualDirectories | FL Identity,*Authentication*
And make sure the Basic and Forms authentications are enabled in
Default Web Site and Ntlm, WindowsIntegrated
authentication methods are enabled in
Exchange Back End. Then restart IIS service by running
iisreset /noforce from a command prompt window.
If the issue persists, please collect any event logs or IIS logs for further analysis.
Thanks,
Winnie Liang
TechNet Community Support

Portal Language Iview

Hi,
I need to add portal language iview in the personalized link, Where can i get this language iview. This is required to change the language of the users.
Regards,
Sanjeev Mourya

Hi,
I am using EP 6.0 SP15
Personalized page has been modified earlier, now I need to add local language iview or page in the personalize link.
How to do it? If I check the standard role, I am able to see the local page, but when I check the delta link, It is not poing to the exact page, It is inhertited by defualt page and point to that page only.
Please reply...
Thanks
Regards,
Sanjeev

Portal Transaction iView Button disabled

Hello expert,
I wish know why the button on menu of Pop-Up Portal are disabled.
I created a SAP Portal Transaction iView:
Image:
http://img718.imageshack.us/img718/7001/helpsdn.jpg
And the button NEW WINDOW is disabled, but if I put on the field where we type transaction: /ose37
then, a new window will open because I used /o
My question is: Why this button - NEW WINDOW is disabled? How can I enable this?
thanks.

The solution for other versions is explained in the same note. However the note says that the procedure is NOT recommended and NOT supported by SAP.
You will need to editi the WinGuiRenderLayer.properties and set -wp=false in the SSDCommandTemplate
For NW04 realease and above the WinGuiRenderLayer.properties can be found at:
../usr/sap/< SID>/<InstID>/j2ee/cluster/server< server#> /apps/sap.com/irj/servlet_jsp/irj/root/web-inf/portal/portalapps/com.sap.portal.appintegrator.sap/property/transaction
(Make these changes in all the server nodes. A restart of the portal might be required after making these changes.)
Please note that if you change anything in this property file, it will be overwritten if a new version of application com.sap.portal.appintegrator.sap.par is delivered or when a new SP is applied.
It is also recommended to keep the original archive com.sap.portal.appintegrator.sap.par in a temporary folder and redeploy it if you encounter any side effects.
Have a look at this thread also:
WinGUI create new session option not available
Thanks,
Shanti

Portal Favorites iView is not appearing !!!!!!

Hi
the Portal favorite iview is not appearing.
We have transported all KM content from dev to test server.
The Portal favourite iView itself is not coming.i have checked in Contemt Administration> KM content> root> entry point> favorites.
the favourite folder is there, but iView is not appearing.
Need help.
Regards
Disha

Hi Disha,
Check whether the Portal Favorites iView is enabled and set to Visible under
Portal Content ® Portal User ® Standard Portal Users ->
Tool Area iView and choose Open - > Portal Favorites
Regards,
Venkat.

Portal Favorites iview always appear in detailed navigation

Hello,
I have a problem regarding the Detailed Navigation with the Portal Favorites iview.
The iview always appears in the Detailed Navigation, although the only thing it shows is the message "there are no items to display" (meaning that there are no favorites). This causes the detailed navigation to always appear even when there is no need for it (no navigation links and no other content attached to it).
I tried removing the Portal Favorites iview (because we don't use that iview in the portal and have no need for it) from the innerpage of the default framework page, and it works, but after the next restart of the portal, the iview returns.
Is there any way to remove it completely so that it won't appear again?
We're running EP7 SP14.
Thanks in advance,
Tal.

Hi,
Create a new framework page by creating a delta link of the original page and then modify that framework page.
Also you will have to create a new portal desktop and use the modified page and also set the desktop rules accordingly.
Thanks,
GLM

Difference between "Favorites"- & "Portal Favorites"-iView

Hi SDN
Can anybody tell me the difference between the km-iView "Favorites" and "Portal Favorites"?
Also, when I enable the "Favorites"-iView a caption between the Favorites-entries and the Tray is added. How can I remove this?
And: The layout of the Favorites-iView-entries is different from those of the Portal-Favorites-iView-entries (the space between the list-dot and the text). It seems not to be affected the same way by the Complex Items -> Tree settings in Theme Editor.
Thanks in advance
Michael

As I found out the LayoutSet-Setting is responsible for the display.
In Favorites-iView the default LayoutSet was LinkListExplorer. After I changed it to PortalFavoritesExplorer the space between dot-and-text vanished along with the "Favorites"-caption - but sadly the "Organize Entries" Link on the bottom disappeared, too...
I think I have to play around a bit with LayoutSets
Main parts of the question already answered...
What still remains is the question about the acutal difference between these iViews.
Michael

Translated content in Portal Favourites iView

Hi All,
I have Portal roles in two languages English and German. I set the browser language to check the translations. Initially the browser language is English. When we add the role to Portal Favourites and then change the browser language to German, the text in the Roles is changed but the text in the Portal Favourites iview still remains in English. Can anyone tell me how to translate the content of Portal Favourites iview?
Thanks,
Priya

Hi,
You can upload an Image or an HTML file in the KM Repository and then create an iview pointing to that file. Assign that to a role and and make the entry point YES.
Assign that role to user.
Whenever that user logs in the image will be displayed.
Hope this helps!
Regards,
Atul Shrivastava

Managed system asking logon popup while clicking change & Workload E2E

Hi ,
Managed system asking logon popup while clicking change & Workload E2E in solman_workcenter ->RCA>E2E
it asking logon pop-up if i click change analysis & workload analysis for all managed system.
My Bi client for solman system is 400.but they asking my BI production system logon credential.
I check in Solman_setup , i gave my bi client only and also i re-run my solman_setup basic configuration wizard.
But still i am getting the pop-up.
How to change this setting .Any help?
Regards,
Karthik

Hi ,
I found In Solman_workcenter-> RCA -> diagnosticsetup -> Diagnostic system -> Advanced setup ->last setup result showing
"Successfully stored property setup/SMD_URL=http://<solman hostname >:50100/ into SMD repository
Successfully stored property setup/BI_URL=http://<Bi hostname >:8080/ into SMD repository
Stored BI URL in BI configuration : http://<BI hostname>:8080/
Stored Diagnostics URL in BI configuration : http://<:soman hostname>50100/"
Here BI URL is map to my BI production system. How to change solman 400
in this place.
how to change this setting?
Plz give path to find SMD repository.
Regards,
Karthik
Edited by: HemaKarthik on Aug 30, 2010 7:50 PM

How to customise portal favourites iView

Hi,
Could you please let me know the name of par file for favourites iView in portal. I need to customise this iView.
Thanks,
ksk

com.sap.km.cm.navigation.par.bak
this is the Portal Favorites iView related PAR which presents you option for adding internal or extrernal links. I hope you are talking about this one only?
Regards,
Shubhadip

Portal OWA iView logon popup issue

Similar Messages

Maybe you are looking for