Portal Platform SR1 install hanging

Hi,
I am currently installing Portal Platform on J2EE 6.40 SP11. the install is "hanging" at phase 2 of phase 13. the machine is still running, processor usage doesnt go past 2%. is this normal because of deployment or something else?
Thanks,
Raj

Check the sapinst_dev.log and see which step it is hung at.
Often you can simply stop/start outside of sapinst and then retry inside sapinst - BUT - always make certain that no deployments are ongoing or you will end up with a worse problem.
Nick

Similar Messages

SR1 to SP14 Upgrade - Portal Platform Warning

Hello all,
I am upgrading the recently installed SR1 to SP12. I successfully applied the Patch for WEBAS J2EE server. Now I'm trying to apply Portal Platform patches. During the "Deploy EAR Files" phase (6 of 12), it gave a warning Message box saying "The deloplyment may require manual postprocessing. See output of logfile C:\ProgramFiles\sapinst_instdir\callSdmViaSapinst.log' and in the status Bar it said 'Finished but with Warning'.
When I checked the log file i didnt fine any error or warning. It seems to me fine. Wonder what this message means.
(During the WAS Upgrade i upgraded the Central Instance and I dont have any other dialog instances).
But After I clicked Ok on the message box, the installation continued Normally and it seems to be going fine.
Can anyone help me out in this ?
Thanks.

Eric,
Thank you so much for answering me. It really helps.
One more question before i end this thread. I am new to portals and we are installing Portal on the Test box. To demonstrate the upper authorities how it might help for the company. I have so far installed SR1 and now upgrading to SP14. I have not installed TREX so far but will be installing in future. We are installing everything onto one box. I have installed Oracle database, WEBAS, Portal and KMC on the same drive(D:). The drive capacity is 34GB and i have so far used 11.5 GB and left with like 22.5GB. So my question is if I install TREX on another Drive (E:), will 22.5GB space on D: sufficient for doing the development which includes ESS, MSS import and bit of development?

Portal install hangs at 61%

I have install ias9 on several machines using different Linux distributions and they all seem to hang at 61% of the portal configuration assistant install. I am now trying it on a P-III 1Ghz with 512MB ram and it has been sittingat 61% for about 6 hours. CPU usage still at 100%.
null

I too downloaded the 9iAS installation for Linux from OTN. I am also experiencing the same problem you are...here's an excerpt from the $ORACLE_HOME/assistants/opca/install.log:
...Importing component: ID = 1076115684 Name = RPT_PDETAILS Owner = PEOPLE_APP Type = AREPORT
...Importing component: ID = 1065830443 Name = RPT_SEARCH Owner = PEOPLE_APP Type = AREPORT
... Installing SCOTT Data
...Building demonstration tables. Please wait.
...attempting to create user scott/tiger
It appears that SCOTT has already been created, data installed, and then tries to create the user again...SCOTT already exists and the install hangs.
What I did to get around this is open a separate xterm and executed:
tail -f $ORACLE_HOME/assistants/opca/install.log
Then when it got to the point shown above where it was trying to create SCOTT I opened up another xterm and executed:
ps -ef
It showed me (excerpt):
oracle 31208 31197 0 00:38 pts/2 00:00:02 /u02/app/oracle/jre/1.1.8/bin/li
oracle 31209 31197 0 00:38 pts/2 00:00:16 /u02/app/oracle/jre/1.1.8/bin/li
oracle 31211 31197 0 00:38 pts/2 00:00:00 /u02/app/oracle/jre/1.1.8/bin/li
oracle 31286 31211 0 01:27 pts/2 00:00:01 ../../bin/sqlplus
oracle 31303 1 1 01:52 ? 00:00:00 xterm -fg white -bg black -sl 20
oracle 31305 31303 0 01:52 pts/1 00:00:00 bash
oracle 31315 31305 0 01:53 pts/1 00:00:00 ps -ef
I assumed that process 31286 was the one trying to recreate SCOTT. I double checked that the user did exist by querying DBA_USERS from another box and the user did in fact exist. So I killed process 31286 with a gracefull exit request:
kill 31286
...and the install continued until 100% completion. Note that after the install was completed, the processor on my database box was pegged at 100%. I had to kill the process on the database side that was trying to recreate SCOTT. Looks like the Portal install script isn't quite right for the 9iAS for Linux install I pulled down from OTN.
I have yet to attempt to connect to the Portal installtion as it was late and I needed to get some sleep. I will try to connect to the Portal installation this evening to determine if it was a success.
I hope this information helps.
My question to Mr. Lincks is: Have you perform this installation on the Linux platform? If so, was the installation performed from media supplied by Oracle? I too have performed the installation several times on Solaris and on NT with downloads from OTN, however, I did not have a problem like this one from the Linux download.
Thanks,
Mike

Directory Integration Platform Configuration Assistant hanging

Hi,
Installing 10gAS (10.1.2.0.2) infrastructure on Linux ES4 (64-bit) - High Availability cluster, node 1.
The Directory Integration Platform CA is hanging when I retry it, it having previously failed probably due to a Load Balancer config error on my part (I had a timeout set too low (30s) and got "Broken Pipe" error message).
Having fixed this LB config, hit retry on the CA (still in the OUI) but it is just hanging.
Tried deleting the /tmp/EM_CONFIG_INSTALL.lk file, as per the install doc, and retrying but no success.
I am on retry attempt no. 7 and previous attempt (I think attempt no. 4) reported the following in dipca.log:
oracle.ldap.oidinstall.backend.OIDCAException: Invalid Credentials
at oracle.ldap.oidinstall.backend.OIDConfiguration.sslbind(OIDConfiguration.java:814)
at oracle.ldap.oidinstall.backend.OIDConfiguration.<init>(OIDConfiguration.java:144)
at oracle.ldap.oidinstall.backend.OIDConfigWrapper.configDIP(OIDConfigWrapper.java:463)
This log has not been written to since this attempt.
Any ideas?
Thanks,
Gavin

Hi,
If the SSOCA falis, you may notice a Java Stack Trace. Can you please post the Java Stack Trace too ? It might give a clue about the problem.
Regards,
Sandeep

JumpStartKit install hangs at 87% complete during database creation / instance configuration

Hello folks, I'm wanting to evaluate Oracle WebCenter Portal 11.1.1.8 (huge improvement over 11.1.1.7, which I have already gave a quick try in the VDI provided by Oracle).
So I found out about this Jump Start Kit, which installs each required piece once you've got a properly configured Linux environment. I had some fun with the prereqs but now that's all completed and I got SO EXCITED to make it past "STEP 4".
So now I'm encountering the same issue during installation -- in STEP 6 of 22 Configuration of Database Instance (Completing Database Creation) it gets to 87% complete and then nothing seems to happen, it never gets beyond that point even if I wait 10 more hours:
NOTE: I suspect my issue is not specific to the "Jump Start Kit", but rather it is something others have encountered during the Database creation/configuration step of the Oracle Universal Installer in general. And hopefully others have solved it.
"/opt/oracle/portal" is my INSTALL_DIR ; I had launched the JSK installer with this command:
./runme INSTANCE_PASSWORD=apwd ROOT_PASSWORD=rpwd DOWNLOAD_DIR=/media/sf_Downloads/JSKfiles INSTALL_DIR=/opt/oracle/portal
- The installer makes it this far, before it seems to get "stuck" -- even after many hours there is no change, HD is not doing anything, CPU stays at <5% usage:
rtkit.main.JSKStarter - launchScript:172 - Tue Jun 10 15:41:38 MDT 2014: BEGIN STEP 6 of 22: Configuration of Database Instance. Estimated time is around 5 minutes. Please wait..
10/06/2014 15:41:38.545 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 -
10/06/2014 15:41:48.222 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - Copying database files
10/06/2014 15:41:48.413 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 1% complete
10/06/2014 15:41:52.894 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 3% complete
10/06/2014 15:41:52.915 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 11% complete
10/06/2014 15:42:02.917 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 18% complete
10/06/2014 15:42:32.920 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 26% complete
10/06/2014 15:42:42.638 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 37% complete
10/06/2014 15:42:42.640 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - Creating and starting Oracle instance
10/06/2014 15:42:48.568 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 40% complete
10/06/2014 15:42:56.827 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 45% complete
10/06/2014 15:42:57.357 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 46% complete
10/06/2014 15:42:57.526 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 47% complete
10/06/2014 15:42:57.627 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 48% complete
10/06/2014 15:42:57.834 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 49% complete
10/06/2014 15:44:42.915 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 54% complete
10/06/2014 15:44:42.963 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 59% complete
10/06/2014 15:44:43.036 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 60% complete
10/06/2014 15:44:43.452 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 61% complete
10/06/2014 15:44:43.452 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 64% complete
10/06/2014 15:44:43.453 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - Completing Database Creation
10/06/2014 15:44:43.493 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 68% complete
10/06/2014 15:44:43.510 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 72% complete
10/06/2014 15:44:43.571 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 76% complete
10/06/2014 15:45:01.516 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 87% complete
I am using VirtualBox on Windows 7, I have tried it multiple times, first with the guest OS as Oracle Linux 6, and then Oracle Linux 5 (fun learning about updating the version of Java!).
It always gets to the same point and then it just seems to do nothing -- no progress, but no error message on-screen (see log files below). But it seems to be using less than 5% CPU usage... and waiting 10 hours makes no difference.
Based on what I found in tons of Google searching, I tried increasing my swap file, adding more memory and HD space (12GB RAM and 10GB sap and 20GB free hard drive space) but still nothing changed.
In post #2 of this thread I will separately provide the logging details, which I hope will be helpful.
Thanks in advance!
Darren.
PS: moderator, I attempted to create this thread in other Spaces because I did not know about this "Portal JSK" specific one -- was that why my thread was rejected? NO REASON WAS GIVEN. If that WAS the reason, I have to say that it will be nearly impossible for anyone who is able to help me to actually FIND this thread here because as I said I do not think it specific to ONLY the Portal JSK. (But I will post it only here just in case that's the reason for the previous rejections)

First off, thank you very much for not just deleting the other 2 threads -- I intentionally created them in the other 2 spaces that MIGHT find a set of eyes that can help -- but in both I linked to THIS thread because this is the specific product. So this is the only place replies will be found therefore no "duplication" to worry about... but as I said this is likely not specific to PortalJSK since others on the internet have described a similar problem during the Oracle database installation.
Second of all. here we go, the log contents...
...So in the hope that I could troubleshoot based on some error logging, I had a look inside "/opt/oracle/portal/db/OraInventory/logs/"...
- "/opt/oracle/portal/db/OraInventory/logs/oraInstall2014-06-10_03-27-37PM.err" is empty (0 bytes),
- "/opt/oracle/portal/db/OraInventory/logs/installActions2014-06-10_03-27-37PM.log" * (2.3MB) ends with...
INFO: Terminating all background operations
INFO: Terminated all background operations
INFO: Successfully executed the flow in SILENT mode
INFO: Finding the most appropriate exit status for the current application
INFO: Exit Status is 0
INFO: Shutdown Oracle Database 11g Release 2 Installer
INFO: Unloading Setup Driver
[eof]
I am not sure of the value of the additional log files inside "/opt/oracle/run/logs/", here is what they contain...
- all of the "/opt/oracle/run/logs/xyz_NofN.zip.unzip.out" files are empty (0 bytes).
- "/opt/oracle/run/logs/install_commands.log" is tiny, it just has this:
/media/sf_Downloads/JSKfiles/DB/database/runInstaller -invPtrLoc /opt/oracle/run/linux64/dborainst.loc -ignoreSysPrereqs -ignorePrereq -force -silent -waitforcompletion -responseFile /opt/oracle/run/linux64/db_generated.rsp
/opt/oracle/portal/db/ohome/bin/netca /orahome /opt/oracle/portal/db/ohome /orahnam orcl /instype typical /inscomp client,oraclenet,javavm,server,ano /insprtcl tcp /cfg local /authadp NO_VALUE /responseFile /opt/oracle/run/linux64/netca.rsp /silent
/opt/oracle/portal/db/ohome/bin/dbca -silent -responseFile /opt/oracle/run/linux64/dbca.rsp -sampleSchema true -oratabLocation ORATAB
- "webtier_prereqs.log" and "ecm_prereqs.log" and "wcprereqs.log" all say that all tests passed.
(Tests for HD and RAM space and swap size and # of processes etc. are all SUCCESS; and all required packages are installed and high enough version, etc.)
- "/opt/oracle/run/logs/dbprereqs_log.txt" says this:
Starting Oracle Universal Installer...
Checking Temp space: must be greater than 120 MB.   Actual 8855 MB    Passed
Checking swap space: must be greater than 150 MB.   Actual 4031 MB    Passed
Preparing to launch Oracle Universal Installer from /opt/oracle/portal/tmpdir/OraInstall2014-06-10_03-26-23PM. Please wait ...[WARNING] [INS-13014] Target environment do not meet some optional requirements.
   CAUSE: Some of the optional prerequisites are not met. See logs for details. /opt/oracle/portal/db/OraInventory/logs/installActions2014-06-10_03-26-23PM.log
   ACTION: Identify the list of failed prerequisite checks from the log: /opt/oracle/portal/db/OraInventory/logs/installActions2014-06-10_03-26-23PM.log. Then either from the log file or from installation manual find the appropriate configuration to meet the prerequisites and fix it manually.
- "/opt/oracle/run/logs/wls-install.log" is the most confusing, maybe this is the reason for getting "stuck"?
2014-06-10 15:24:38,139 WARN [home] com.bea.cie.gpr.internal.model.JvmTargetManagerImpl - Property value for linux32_jdk160_29b11.zip not found..
2014-06-10 15:24:38,143 WARN [home] com.bea.cie.gpr.internal.model.JvmTargetManagerImpl - Property value for linux_ia32_jrockit_160_29_D1.2.0-10_jdk.zip not found..
2014-06-10 15:24:38,206 WARN [home] com.bea.cie.gpr.internal.model.JvmTargetManagerImpl - Property value for linux32_jdk160_29b11.zip not found..
2014-06-10 15:24:38,209 WARN [home] com.bea.cie.gpr.internal.model.JvmTargetManagerImpl - Property value for linux_ia32_jrockit_160_29_D1.2.0-10_jdk.zip not found..
2014-06-10 15:24:38,225 WARN [home] com.bea.plateng.wizard.installer.silent.tasks.SilentBEAHomeTask - /opt/oracle/portal/fmw directory is not empty. Proceed with installation?
2014-06-10 15:24:39,223 WARN [ocmCredVerify] com.bea.plateng.wizard.installer.helpers.OCMInstallHelper - Failed test connection
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.plateng.wizard.installer.helpers.OCMInstallHelper.testConnection(OCMInstallHelper.java:92)
at com.bea.plateng.wizard.installer.silent.tasks.OCMCredVerifySilentTask.execute(OCMCredVerifySilentTask.java:35)
at com.bea.plateng.wizard.silent.tasks.AbstractSilentTask.run(AbstractSilentTask.java:28)
at java.lang.Thread.run(Thread.java:662)
Caused by: com.bea.plateng.wizard.installer.helpers.OCMException: Connection failed in SSL peer verificaition.
at com.bea.plateng.wizard.installer.helpers.OCMHelper.testSimpleConnection(OCMHelper.java:54)
at com.bea.plateng.wizard.installer.helpers.OCMHelper.testConnection(OCMHelper.java:145)
... 8 more
2014-06-10 15:24:39,228 WARN [ocmCredVerify] com.bea.plateng.wizard.installer.silent.tasks.OCMCredVerifySilentTask - OCMInstallException:
com.bea.plateng.wizard.installer.helpers.OCMInstallException
at com.bea.plateng.wizard.installer.helpers.OCMInstallHelper.testConnection(OCMInstallHelper.java:96)
at com.bea.plateng.wizard.installer.silent.tasks.OCMCredVerifySilentTask.execute(OCMCredVerifySilentTask.java:35)
at com.bea.plateng.wizard.silent.tasks.AbstractSilentTask.run(AbstractSilentTask.java:28)
at java.lang.Thread.run(Thread.java:662)
2014-06-10 15:25:49,347 INFO [Thread-13] com.oracle.cie.domain.TemplateImporter - Domain Extension Successful!
2014-06-10 15:25:49,350 INFO [runScript] com.oracle.cie.domain.script.ScriptExecutor - close template
2014-06-10 15:25:49,351 INFO [runScript] com.oracle.cie.domain.script.ScriptExecutor - succeed: close template
2014-06-10 15:25:49,351 INFO [runScript] com.oracle.cie.domain.script.ScriptExecutor - read domain from "/opt/oracle/portal/fmw/wlserver_10.3/samples/domains/medrec-spring"
2014-06-10 15:25:49,405 INFO [runScript] com.oracle.cie.domain.script.ScriptExecutor - succeed: read domain from "/opt/oracle/portal/fmw/wlserver_10.3/samples/domains/medrec-spring"
2014-06-10 15:25:49,405 INFO [runScript] com.oracle.cie.domain.script.ScriptExecutor - succeed: update domain
2014-06-10 15:25:49,406 INFO [runScript] com.oracle.cie.domain.script.ScriptExecutor - close template
2014-06-10 15:25:49,406 INFO [runScript] com.oracle.cie.domain.script.ScriptExecutor - succeed: close template
2014-06-10 15:25:49,743 INFO [WizardController] com.bea.plateng.wizard.silent.tasks.LogTask - The installation was successfull!
^ ^ ^ BUT IT SEEMS TO END AS A "SUCCESS"!?
- "install_setup.log" ends with the following -- and so does "JSKDownloader.log" (the "master log"? it contains basically what shows up on-screen)
rtkit.main.JSKStarter - launchScript:172 - Tue Jun 10 15:41:38 MDT 2014: BEGIN STEP 6 of 22: Configuration of Database Instance. Estimated time is around 5 minutes. Please wait..
10/06/2014 15:41:38.545 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 -
10/06/2014 15:41:48.222 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - Copying database files
10/06/2014 15:41:48.413 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 1% complete
10/06/2014 15:41:52.894 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 3% complete
10/06/2014 15:41:52.915 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 11% complete
10/06/2014 15:42:02.917 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 18% complete
10/06/2014 15:42:32.920 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 26% complete
10/06/2014 15:42:42.638 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 37% complete
10/06/2014 15:42:42.640 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - Creating and starting Oracle instance
10/06/2014 15:42:48.568 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 40% complete
10/06/2014 15:42:56.827 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 45% complete
10/06/2014 15:42:57.357 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 46% complete
10/06/2014 15:42:57.526 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 47% complete
10/06/2014 15:42:57.627 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 48% complete
10/06/2014 15:42:57.834 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 49% complete
10/06/2014 15:44:42.915 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 54% complete
10/06/2014 15:44:42.963 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 59% complete
10/06/2014 15:44:43.036 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 60% complete
10/06/2014 15:44:43.452 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 61% complete
10/06/2014 15:44:43.452 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 64% complete
10/06/2014 15:44:43.453 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - Completing Database Creation
10/06/2014 15:44:43.493 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 68% complete
10/06/2014 15:44:43.510 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 72% complete
10/06/2014 15:44:43.571 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 76% complete
10/06/2014 15:45:01.516 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 87% complete
* Here are the final 261 lines of "/opt/oracle/portal/db/OraInventory/logs/installActions2014-06-10_03-27-37PM.log"...
INFO: Start output from spawned process:
INFO: ----------------------------------
INFO:
INFO: SaveInvWCCE JRE files in Scratch
INFO: oracle.installer.mandatorySetup property is set to false, so skipping the execution of additional tools
INFO: oracle.installer.installUpdates property is set to false, so skipping the checking of updates
INFO: Config Initialize JRE files in Scratch
INFO: stage loc: /opt/oracle/portal/tmpdir/OraInstall2014-06-10_03-27-37PM/
INFO: Copying Aggr XML for: Oracle Configuration Manager
INFO: stage loc: /opt/oracle/portal/tmpdir/OraInstall2014-06-10_03-27-37PM/
INFO: Copying Aggr XML for: HAS Common Files
INFO: stage loc: /opt/oracle/portal/tmpdir/OraInstall2014-06-10_03-27-37PM/
INFO: Copying Aggr XML for: Oracle Netca Client
INFO: stage loc: /opt/oracle/portal/tmpdir/OraInstall2014-06-10_03-27-37PM/
INFO: Copying Aggr XML for: Database Configuration and Upgrade Assistants
INFO: stage loc: /opt/oracle/portal/tmpdir/OraInstall2014-06-10_03-27-37PM/
INFO: Copying Aggr XML for: Oracle Enterprise Manager Console DB
INFO: stage loc: /opt/oracle/portal/tmpdir/OraInstall2014-06-10_03-27-37PM/
INFO: Copying Aggr XML for: Oracle Database 11g
INFO: The Top level Aggreage File = /opt/oracle/portal/db/ohome/inventory/ContentsXML/ConfigXML/oracle.server.11_2_0_1_0.xml
INFO: OUI_CAPlugIn is not found in XML
INFO: no. of tools to supress: 0 for comp: Oracle Enterprise Manager Console DB
INFO: cf session will be created for OH: /opt/oracle/portal/db/ohome/ TLAggr: oracle.server instancePath: inventory/ContentsXML/ConfigXML/
INFO: cf session for OH: /opt/oracle/portal/db/ohome/ TL Aggr: [oracle.server] instancePath: inventory/ContentsXML/ConfigXML/
INFO: aggr ref length : 6
INFO: cf session hashcode: 620301082
INFO: cf session saved with key: OraDb11g_home1 oracle.server
INFO: cf session is ok
INFO: created and saved cf session for oh: OraDb11g_home1
INFO: passing params to cf
INFO: Handling the storing of variables for aggr name oracle.sysman.ccr
INFO: This variable s_OPSNodeInfoString is not added to the global context map
INFO: This variable b_isUNIX is not added to the global context map
INFO: This variable b_createResponseFile is not added to the global context map
INFO: This variable s_ps is not added to the global context map
INFO: This variable s_oraName is not added to the global context map
INFO: This variable s_ccrJarDestination is not added to the global context map
INFO: This variable b_localInstall is not added to the global context map
INFO: This variable b_doConfigCCR is not added to the global context map
INFO: This variable b_ccrUpgrade is not added to the global context map
INFO: This variable s_rspFilePath is not added to the global context map
INFO: This variable PROD_HOME is not added to the global context map
INFO: for oracle.has.common no aggregate found by cf: no configuration
INFO: Handling the storing of variables for aggr name oracle.assistants.netca.client
INFO: This variable s_swingallName is not added to the global context map
INFO: This variable s_shareName is not added to the global context map
INFO: This variable s_runtimeLib is not added to the global context map
INFO: This variable s_runTimeJar is not added to the global context map
INFO: This variable s_responseFileName is not added to the global context map
INFO: This variable s_operatingSystem is not added to the global context map
INFO: This variable s_netcfgName is not added to the global context map
INFO: This variable s_netcahelpName is not added to the global context map
INFO: This variable s_netcaUpgradeFlag is not added to the global context map
INFO: This variable s_netcaClass is not added to the global context map
INFO: This variable s_netCA_Args is not added to the global context map
INFO: This variable s_netCAInstalledProtocols is not added to the global context map
INFO: This variable s_netAPIName is not added to the global context map
INFO: This variable s_ldapclnt9 is not added to the global context map
INFO: This variable s_ldapclnt11 is not added to the global context map
INFO: This variable s_ldapclnt10 is not added to the global context map
INFO: This variable s_jreLocation is not added to the global context map
INFO: This variable s_jreJarFile is not added to the global context map
INFO: This variable s_jreJar is not added to the global context map
INFO: This variable s_jewtName is not added to the global context map
INFO: This variable s_installTypeForLaunchNETCA is not added to the global context map
INFO: This variable s_icebrowserName is not added to the global context map
INFO: This variable s_helpName is not added to the global context map
INFO: This variable s_ewtcompatName is not added to the global context map
INFO: This variable s_ewtName is not added to the global context map
INFO: This variable s_ewtFile is not added to the global context map
INFO: This variable s_ewtCompat is not added to the global context map
INFO: This variable s_cfgMethod is not added to the global context map
INFO: This variable s_caHelpZhTwJar is not added to the global context map
INFO: This variable s_caHelpZhCnJar is not added to the global context map
INFO: This variable s_caHelpPtBRJar is not added to the global context map
INFO: This variable s_caHelpKoJar is not added to the global context map
INFO: This variable s_caHelpJar is not added to the global context map
INFO: This variable s_caHelpJaJar is not added to the global context map
INFO: This variable s_caHelpItJar is not added to the global context map
INFO: This variable s_caHelpFrJar is not added to the global context map
INFO: This variable s_caHelpEsJar is not added to the global context map
INFO: This variable s_caHelpDeJar is not added to the global context map
INFO: This variable s_authAdaptors is not added to the global context map
INFO: This variable ps_netCA_Args_OverRide is not added to the global context map
INFO: This variable b_net8ServerInstalling is not added to the global context map
INFO: This variable b_javavmIsInstalling is not added to the global context map
INFO: This variable b_isWindows is not added to the global context map
INFO: This variable b_isUNIX is not added to the global context map
INFO: This variable b_cmanIsInstalling is not added to the global context map
INFO: This variable b_anoIsInstalling is not added to the global context map
INFO: This variable s_xmlparservLoc is not added to the global context map
INFO: This variable s_ouiJlibDir is not added to the global context map
INFO: This variable s_opsmJlib is not added to the global context map
INFO: This variable s_ntwkTools is not added to the global context map
INFO: This variable s_netjlibDir is not added to the global context map
INFO: This variable s_netcahelpLocation is not added to the global context map
INFO: This variable s_netcaJlibDir is not added to the global context map
INFO: This variable s_netcaDocDir is not added to the global context map
INFO: This variable s_netPropertiesFile is not added to the global context map
INFO: This variable s_netCA is not added to the global context map
INFO: This variable s_net8caFileToInstantiate is not added to the global context map
INFO: This variable s_jre15Location is not added to the global context map
INFO: This variable s_jlibDir is not added to the global context map
INFO: This variable s_inventoryPrereqOui is not added to the global context map
INFO: This variable s_emdwLibDir is not added to the global context map
INFO: This variable s_caHelpDir is not added to the global context map
INFO: This variable s_assistantJlibDir is not added to the global context map
INFO: This variable s_JavaFlag is not added to the global context map
INFO: This variable b_isOPS is not added to the global context map
INFO: This variable s_windowsCommandLine is not added to the global context map
INFO: This variable s_net8caExecutable is not added to the global context map
INFO: This variable s_netcaUserDirArg is not added to the global context map
INFO: This variable s_installTypeForNetCA is not added to the global context map
INFO: This variable s_netcaSilentFlag is not added to the global context map
INFO: This variable s_netCAInstalledProducts is not added to the global context map
INFO: This variable s_netcaClasspath is not added to the global context map
INFO: This variable PROD_HOME is not added to the global context map
INFO: ORACLE_HOME is not settable, hence not setting the value
INFO: Handling the storing of variables for aggr name oracle.assistants.server
INFO: This variable s_operatingSystem is not added to the global context map
INFO: This variable s_jreLocation is not added to the global context map
INFO: This variable pn_dboffset is not added to the global context map
INFO: This variable cs_swingName is not added to the global context map
INFO: This variable cs_komodoName is not added to the global context map
INFO: This variable cs_kodiakName is not added to the global context map
INFO: This variable cs_jewtName is not added to the global context map
INFO: This variable cs_iceBrowserName is not added to the global context map
INFO: This variable cs_ewtcompatName is not added to the global context map
INFO: This variable cs_ewtName is not added to the global context map
INFO: This variable cs_baliShareName is not added to the global context map
INFO: This variable b_orabaseContainsOrahome is not added to the global context map
INFO: This variable b_isWINDOWS is not added to the global context map
INFO: This variable b_isUNIX is not added to the global context map
INFO: This variable sl_dbmaParameterListForIcon is not added to the global context map
INFO: This variable sl_dbcaParameterListForIcon is not added to the global context map
INFO: This variable s_xmlparservLoc is not added to the global context map
INFO: This variable s_ouiJlibLocation is not added to the global context map
INFO: This variable s_oratabLocation is not added to the global context map
INFO: This variable s_opsmLocation is not added to the global context map
INFO: This variable s_dbuaLocation is not added to the global context map
INFO: This variable s_dbcaLocation is not added to the global context map
INFO: This variable s_OracleBinLocation is not added to the global context map
INFO: This variable s_dbcaInstLaunchFile is not added to the global context map
INFO: This variable s_dbcaLaunchFile is not added to the global context map
INFO: This variable s_dbmaLaunchFile is not added to the global context map
INFO: This variable s_dbmaInstLaunchFile is not added to the global context map
INFO: This variable PROD_HOME is not added to the global context map
INFO: ORACLE_HOME is not settable, hence not setting the value
INFO: Handling the storing of variables for aggr name oracle.sysman.console.db
INFO: This variable s_sid is not added to the global context map
INFO: This variable s_serverInstallType is not added to the global context map
INFO: This variable s_platform is not added to the global context map
INFO: HashMap added with the key oracle.sysman.console.db and an empty variable Vector
INFO: Adding the variable s_obfOc4jAdmPasswd to the aggregate oracle.sysman.console.db
INFO: Adding the variable s_obfOc4jAdmPasswd to the global context map for the aggregate oracle.sysman.console.db
INFO: Adding the variable s_obfJtaAdmPasswd to the aggregate oracle.sysman.console.db
INFO: Adding the variable s_obfJtaAdmPasswd to the global context map for the aggregate oracle.sysman.console.db
INFO: This variable s_nlsLang is not added to the global context map
INFO: This variable s_emailServer is not added to the global context map
INFO: This variable s_emailAddress is not added to the global context map
INFO: This variable s_cfgtyperet is not added to the global context map
INFO: Adding the variable s_JtaAdmPasswd to the aggregate oracle.sysman.console.db
INFO: Adding the variable s_JtaAdmPasswd to the global context map for the aggregate oracle.sysman.console.db
INFO: This variable n_uploadInterval is not added to the global context map
INFO: This variable localhost is not added to the global context map
INFO: This variable b_launchTools is not added to the global context map
INFO: This variable b_launchBrowser is not added to the global context map
INFO: This variable b_isUNIX is not added to the global context map
INFO: This variable b_centralConsole is not added to the global context map
INFO: This variable USE_HTTP_PROXY is not added to the global context map
INFO: This variable USE_DB_CONSOLE is not added to the global context map
INFO: This variable SET_CONSOLE_MODE is not added to the global context map
INFO: This variable SA_SETUP is not added to the global context map
INFO: This variable OC4JLOC is not added to the global context map
INFO: This variable NO_PC_MODE is not added to the global context map
INFO: This variable LOGGING_LEVEL is not added to the global context map
INFO: This variable JRE_HOME is not added to the global context map
INFO: This variable ISQLPLUS_PROTOCOL is not added to the global context map
INFO: This variable ISQLPLUS_PORT is not added to the global context map
INFO: This variable HOST_SID_OFFSET_ENABLED is not added to the global context map
INFO: This variable HOSTNAME is not added to the global context map
INFO: This variable EM_UPLOAD_DISABLE is not added to the global context map
INFO: This variable EM_UIX_DEBUG_FLAG is not added to the global context map
INFO: This variable EMPRODVER is not added to the global context map
INFO: This variable CONSOLE_MODE is not added to the global context map
INFO: This variable CONSOLE_CFG is not added to the global context map
INFO: This variable sl_oraclehomes is not added to the global context map
INFO: This variable s_oc4jDir is not added to the global context map
INFO: This variable s_oc4jAppsDir is not added to the global context map
INFO: This variable s_jreHome is not added to the global context map
INFO: This variable s_configcommand is not added to the global context map
INFO: This variable b_isRAC is not added to the global context map
INFO: This variable b_UNIX is not added to the global context map
INFO: This variable OJSP_JAR_LOC is not added to the global context map
INFO: This variable OJSPUTIL_JAR_LOC is not added to the global context map
INFO: This variable LDAP_JAR_LOC is not added to the global context map
INFO: This variable JAVA_HOME is not added to the global context map
INFO: This variable ISQLPLUS_HOST is not added to the global context map
INFO: This variable EM_UIX_LOCATION is not added to the global context map
INFO: This variable EM_REPOS_HOST is not added to the global context map
INFO: This variable EM_PING_COMMAND is not added to the global context map
INFO: This variable EM_OC4J_HOME is not added to the global context map
INFO: This variable EM_EAR_LOC is not added to the global context map
INFO: This variable EMDROOT is not added to the global context map
INFO: Adding the variable s_oc4jAdmPasswd to the aggregate oracle.sysman.console.db
INFO: Adding the variable s_oc4jAdmPasswd to the global context map for the aggregate oracle.sysman.console.db
INFO: This variable s_launchBrowserClasspath is not added to the global context map
INFO: This variable s_javapOracleHome is not added to the global context map
INFO: This variable PROD_HOME is not added to the global context map
INFO: {Parameter:TOPLEVEL_COMPONENT in {Aggregate:OuiConfigVariables:1.0.0.0.0:common}}: Parameter data type is not compatible with the provided String Array.
INFO: passing params to cf done
INFO: done saving info by cf
INFO: This is a shared oracle home or remote nodes are null. No copy required.
INFO: Checkpoint:Failed Checkpoint found returning it for getAllFailedCheckPoints.
INFO: Checkpoint:Failed Checkpoint found returning null for getLastFailedCheckPoint.
INFO: Checkpoint:Index file written and updated
INFO: Checkpoint:Transfer of file done from remote node
INFO: Adding iterator oracle.sysman.oii.oiif.oiifw.OiifwRootShWCDE
INFO: Updating the global context
INFO: Path To 'globalcontext.xml' = /opt/oracle/portal/db/ohome/install/chainedInstall/globalcontext
INFO: Since operation was successful, move the current OiicAPISessionDetails to installed list
INFO: Number of root scripts to be executed = 1
INFO: isSuccessfullInstallation: true
INFO: isSuccessfullRemoteInstallation: true
INFO: Adding ExitStatus SUCCESS to the exit status set
INFO: Completed setting up InstallDB
INFO: Number of root scripts to be executed = 1
INFO: Shutting down OUISetupDriver.JobExecutorThread
INFO: Cleaning up, please wait...
INFO: Dispose the install area control object
INFO: Update the state machine to STATE_CLEAN
INFO: All forked task are completed at state setup
INFO: Completed background operations
INFO: Moved to state <setup>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating state <setup>
WARNING: Validation disabled for the state setup
INFO: Completed validating state <setup>
INFO: Verifying route success
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state finish
INFO: FinishAction Actions.execute called
INFO: Completed executing action at state <finish>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <finish>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating state <finish>
WARNING: Validation disabled for the state finish
INFO: Completed validating state <finish>
INFO: Terminating all background operations
INFO: Terminated all background operations
INFO: Successfully executed the flow in SILENT mode
INFO: Finding the most appropriate exit status for the current application
INFO: Exit Status is 0
INFO: Shutdown Oracle Database 11g Release 2 Installer
INFO: Unloading Setup Driver
----------that is all----------
re. PROCESSES/TASKS at the ending:
Also I had a look in System Monitor and noticed there a TON of processes ("Sleeping") that show up in System Monitor at this time of "freezing" or "hanging" or whatever you want to call it (where nothing is visibly happening anymore).
-The most recent shell script is "install_db_instance.sh" (not surprising) with Waiting Channel "do_wait".
#!/bin/bash
export JSK_DIR=${PWD}
. $JSK_DIR/setup_env.sh
export ORACLE_HOME=$DB_ORACLE_HOME
export ORACLE_BASE=$DB_ORACLE_BASE
echo ""
#$DB_ORACLE_HOME/bin/dbca -createDatabase -templateName $JSK_DIR/General_Purpose.dbc -gdbName orcl -sid orcl -sysPassword $SCHEMA_PASSWORD -systemPassword $SCHEMA_PASSWORD -emConfiguration LOCAL -dbsnmpPassword $SCHEMA_PASSWORD -sysmanPassword $SCHEMA_PASSWORD -datafileJarLocation $DB_ORACLE_HOME/assistants/dbca/templates/ -storageType FS -datafileDestination $DB_ORACLE_DATA -responseFile NO_VALUE -characterset AL32UTF8 -obfuscatedPasswords false -sampleSchema true -oratabLocation ORATAB -recoveryAreaDestination NO_VALUE -silent
echo "$ORACLE_HOME/bin/dbca -silent -responseFile $JSK_DIR/dbca.rsp -sampleSchema true -oratabLocation ORATAB" >> $LOGS_DIR/install_commands.log
$ORACLE_HOME/bin/dbca -silent -responseFile $JSK_DIR/dbca.rsp -sampleSchema true -oratabLocation ORATAB
cat $JSK_DIR/dbca.rsp | grep -v -i PASSWORD > $JSK_DIR/dbca_saved_no_passwords.rsp
rm -f $JSK_DIR/dbca.rsp
echo ""
-Immediately after that is "java" with this Command Line:
/opt/oracle/portal/db/ohome/jdk/jre/bin/java -DORACLE_HOME=/opt/oracle/portal/db/ohome [parameters] -DJDBC_PROTOCOL=thin -mx128m -classpath /opt/oracle/portal/db/ohome/assistants/dbca/jlib/dbca.jar:[otherJarFiles]:/opt/oracle/portal/db/ohome/dv/jlib/dvca.jar oracle.sysman.assistants.dbca.Dbca -silent -responseFile /opt/oracle/run/linux64/dbca.rsp -sampleSchema true -oratabLocation ORATAB
-There are 7 named "oracleorcl" where the Command Line is simply "oracleorcl (LOCAL=NO)" or "oracleorcl (DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))" -- Waiting Channel is "sk_wait_data".
-There are 52 named "oracle" with various similar-looking Command Lines. The Waiting Channel for these varies: "poll_schedule_timeout", or "hrtimer_nanosleep", or "sys_semtimedop" (the 2 highest ProcessIDs -- aka most recent -- have this, with Command Line "ora_w000_orcl" and "xe_w000_XE").
-There are 3 named "sqlplus", their Command Lines are "/opt/oracle/portal/db/ohome/bin/sqlplus -S -N" (the oldest 2), or "/opt/oracle/portal/db/ohome/bin/sqlplus" (the most recent) -- Waiting Channel is "pipe_wait".
Message was edited by: DarrenAg (added PROCESSES/TASKS info)

BPC 7.5 install hanging at Checking Server Environments

Hi all,
I am installing BPC 7.5 on Windows Server 2008, and the install hangs at the Checking Server Environments section.
Any ideas?

Before you run the install check the following :
1. From your BPC Server, open SQL Server manager and try to connect to SQL engine and SSAS engine with the install account you use for BPC (BPCSYSADMIN).
2. Open Reporting Services portal (http://SSRServer/Reports y default) : Make sure you can open the portal homepage.
3. Always run the startup.exe install executable as an Administrator (new functionnality in Windows Server 2008 : Right click / Run as Administrator).
4. Disable Anti-virus during the installation process. This can speed up the installation process.
5. Also make sure that you installed all prerequisites softwares :
- SQL Server 2005 Analysis Service ADMOD.NET (32 or 64 bits, depending of your system)
- MS XML 4.0 SP2
- Microsoft Report Viewer
- Microsoft SQL Server 2005 Backward Compatibility (32 or 64 bits, depending of your system)
- Additional Microsoft IIS 7.0 Rôle : Management Tools (+ all of sub-components / roles) ; Health and Diagnostics (+ all of sub-components / roles) ; Security (+ all of sub-components / roles).
6. Make sure you use the right versions of AntiXss dll / Amenuy PDF and xceedzip.dll (should be fine here as it's checked by the install setup before the step you are blocking on).
Good Luck

OUI patch install hangs, files being used by another application

Hi when a patch install hangs, and the OUI error message is that files needing to be reinstalled are being used by another application, how can you identify which files or processes are responsible so that they can be shut down? All normal Oracle services and DTC are shut down already.
This is patch 6810189 upgrade to 10.2.0.4 (from 10.2.0.3) which includes the April CPU on a Win32 server.

Please check any oracle service is still on ..
need to shutdown listener/oracle service .. and other db service belongs to Oracle.
You can download windows process explorer and check for any oracle process and kill those and then apply CPU
Link :
http://technet.microsoft.com/en-us/sysinternals/bb896653.aspx
--Girish

Windows 7 install hangs at "Windows is loading files ..." on MBA

I have been trying to install Windows 7 Ultimate but each time the install hangs at "Windows is loading files ..." on reboot. I am using a Windows install DVD using an external drive. When the install hangs, the DVD is not being accessed. I have tried several times and it leads to the same result. I have tried different partition sizes (20 GB - 50 GB), no luck.
Any help would be greatly appreciated.

Solution
I have a macmini bought in mid2011 with OS Lion on it. AS it doesnot come with an optical drive, I bought an LG DVD drive and used the windows 7 (64bit) installation DVD. It stopped at windows is loading files....
I tired couple of other options like using flash dirve but it dint work.
The I went to Apple's Genius Bar, and they put the installation dvd into their dvd drive (by Apple). Then the windows installed perfectly fine.
When asked they said it must be the problem of DVD and I found out that it actually is the cause. Apple products require dual layer optical drives but in general the optical drives we buy can only read single layer dvds. So I got to fix the problem by borrowing their dvd drive in genius bar and now i m good to go.....
Hope this helps

64 bit OEL install hangs at installing dogtail in OVM 2.2

I recently upgraded my server to OVM 2.2 and swapped out the dual core AMDs to quad core AMDs at the same time.
Since then I have been unable to create any 64 bit OEL servers. In every instance the install hangs when Installing dogtail-0.6.1-2.el5.noarch
This used to work at 2.1.5 and I can deploy the existing templates, but they are OEL 5.3.
VM-Server Specs
[root@vm-server ~]# uname -a
Linux vm-server 2.6.18-128.2.1.4.9.el5xen #1 SMP Fri Oct 9 14:57:31 EDT 2009 i686 athlon i386 GNU/Linux
[root@vm-server ~]# lspci
00:00.0 RAM memory: nVidia Corporation MCP55 Memory Controller (rev a2)
00:01.0 ISA bridge: nVidia Corporation MCP55 LPC Bridge (rev a3)
00:01.1 SMBus: nVidia Corporation MCP55 SMBus (rev a3)
00:02.0 USB Controller: nVidia Corporation MCP55 USB Controller (rev a1)
00:02.1 USB Controller: nVidia Corporation MCP55 USB Controller (rev a2)
00:04.0 IDE interface: nVidia Corporation MCP55 IDE (rev a1)
00:05.0 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3)
00:05.1 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3)
00:05.2 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3)
00:06.0 PCI bridge: nVidia Corporation MCP55 PCI bridge (rev a2)
00:08.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3)
00:09.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3)
00:0a.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3)
00:0d.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3)
00:0e.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3)
00:0f.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control
00:19.0 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration
00:19.1 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map
00:19.2 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller
00:19.3 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control
00:19.4 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control
01:06.0 Ethernet controller: Intel Corporation 82541PI Gigabit Ethernet Controller (rev 05)
01:07.0 VGA compatible controller: ATI Technologies Inc ES1000 (rev 02)
03:00.0 PCI bridge: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge (rev 07)
03:00.1 PCI bridge: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge (rev 07)
06:00.0 RAID bus controller: Silicon Image, Inc. Unknown device 0242 (rev 01)

2 new updates
1) I get the same errors when trying a command line install
2) I can successfully create fully virtualised VMs
So if all else fails I can create fully virtualised VMs and then convert them, which is a bit of a pain but will at least give me working templates.

Oracle 11g install hangs on windows 7

Hi,
I have downloaded Oracle 11g r2 64 bit install onto my windows system.
When i install, the install hangs after selecting the following
a) Create and configure a database
b) Desktop Class
After these, when I click on Next, the UI hangs.
Help will be appreciated.

Using paramFile: C:\Users\jeevan\Documents\My DAP Downloads\database\install\oraparam.ini
Checking monitor: must be configured to display at least 256 colors. Actual 4294967296 Passed
INFO: [INS-07001] Value for property 'INSTALL_TYPE' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_db_StarterDatabaseType' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_db_CustomComponents' not found in the bean store.
INFO: [INS-07001] Value for property 'ORACLE_HOME' not found in the bean store.
INFO: [INS-07001] Value for property 'ORACLE_BASE' not found in the bean store.
INFO: [INS-07001] Value for property 'FROM_LOCATION' not found in the bean store.
INFO: [INS-07001] Value for property 'TOPLEVEL_COMPONENT' not found in the bean store.
INFO: [INS-07001] Value for property 'TopLevelComponentVersion' not found in the bean store.
WARNING: Failed to load bean oracle.install.ivw.db.bean.DBInstallSettings. Reason: [INS-07001] Value for property 'DBInstallSettings' not found in the bean store.
INFO: Closing bean stores from which the beans can be loaded
INFO: Registering the flow views
INFO: Adding View[type: oracle.install.commons.base.interview.common.view.PrereqGUI viewId: null uiType: null]
INFO: oracle.install.commons.base.interview.common.view.PrereqGUI added to View Type Registry with the key as [PrereqUI]
INFO: Adding View[type: oracle.install.commons.base.interview.common.view.SummaryGUI viewId: null uiType: null]
INFO: oracle.install.commons.base.interview.common.view.SummaryGUI added to View Type Registry with the key as [SummaryUI]
INFO: Adding View[type: oracle.install.commons.base.interview.common.view.SetupGUI viewId: null uiType: null]
INFO: oracle.install.commons.base.interview.common.view.SetupGUI added to View Type Registry with the key as [SetupUI]
INFO: Adding View[type: oracle.install.ivw.common.view.InventoryUI viewId: null uiType: null]
INFO: oracle.install.ivw.common.view.InventoryUI added to View Type Registry with the key as [InventoryUI]
INFO: Adding View[type: oracle.install.ivw.common.view.ProductLanguageGUI viewId: ProductLanguageUI uiType: null]
INFO: oracle.install.ivw.common.view.ProductLanguageGUI added to View Type Registry with the key as [ProductLanguageUI]
INFO: Adding View[type: oracle.install.ivw.common.view.OCMDetailsGUI viewId: OCMDetailsUI uiType: null]
INFO: oracle.install.ivw.common.view.OCMDetailsGUI added to View Type Registry with the key as [OCMDetailsUI]
INFO: Adding View[type: oracle.install.ivw.db.view.ConfigurationTypeUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.ConfigurationTypeUI added to View Type Registry with the key as [ConfigurationTypeUI]
INFO: Adding View[type: oracle.install.ivw.db.view.DBIdentifierUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.DBIdentifierUI added to View Type Registry with the key as [DBIdentifierUI]
INFO: Adding View[type: oracle.install.ivw.db.view.ConfigurationOptionsUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.ConfigurationOptionsUI added to View Type Registry with the key as [ConfigurationOptionsUI]
INFO: Adding View[type: oracle.install.ivw.db.view.ManagementOptionsUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.ManagementOptionsUI added to View Type Registry with the key as [ManagementOptionsUI]
INFO: Adding View[type: oracle.install.ivw.db.view.StorageOptionsUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.StorageOptionsUI added to View Type Registry with the key as [StorageOptionsUI]
INFO: Adding View[type: oracle.install.ivw.db.view.RecoveryBackupUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.RecoveryBackupUI added to View Type Registry with the key as [RecoveryBackupUI]
INFO: Adding View[type: oracle.install.ivw.db.view.ASMDiskGroupSelectionGUI viewId: ASMDiskGroupSelectionUI uiType: null]
INFO: oracle.install.ivw.db.view.ASMDiskGroupSelectionGUI added to View Type Registry with the key as [ASMDiskGroupSelectionUI]
INFO: Adding View[type: oracle.install.ivw.db.view.SchemaPasswordUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.SchemaPasswordUI added to View Type Registry with the key as [SchemaPasswordUI]
INFO: Adding View[type: oracle.install.ivw.db.view.QuickInstallUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.QuickInstallUI added to View Type Registry with the key as [QuickInstallUI]
INFO: Adding View[type: oracle.install.ivw.db.view.InstallOptionsUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.InstallOptionsUI added to View Type Registry with the key as [InstallOptionsUI]
INFO: Adding View[type: oracle.install.ivw.db.view.SystemClassUI viewId: SystemClassUI uiType: null]
INFO: oracle.install.ivw.db.view.SystemClassUI added to View Type Registry with the key as [SystemClassUI]
INFO: Adding View[type: oracle.install.ivw.db.view.InstallLocationUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.InstallLocationUI added to View Type Registry with the key as [InstallLocationUI]
INFO: Adding View[type: oracle.install.ivw.db.view.DBEditionGUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.DBEditionGUI added to View Type Registry with the key as [DBEditionUI]
INFO: Adding View[type: oracle.install.ivw.db.view.NodeSelectionUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.NodeSelectionUI added to View Type Registry with the key as [NodeSelectionUI]
INFO: Adding View[type: oracle.install.ivw.db.view.FinishUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.FinishUI added to View Type Registry with the key as [FinishUI]
INFO: Adding View[type: oracle.install.ivw.db.view.PrivilegedOSGroupsGUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.PrivilegedOSGroupsGUI added to View Type Registry with the key as [PrivilegedOSGroupsUI]
INFO: Adding View[type: oracle.install.ivw.db.view.InstallTypeGUI viewId: installTypeUI uiType: null]
INFO: oracle.install.ivw.db.view.InstallTypeGUI added to View Type Registry with the key as [installTypeUI]
INFO: Initial values of Setup Properties :
PROPERTY VALUE
CLUSTER_NODES {}
COLLECTOR_IGNORE_CONFIGURATION false
COLLECTOR_IGNORE_FAILURES false
COLLECTOR_RESPONSE_FILE
DECLINE_SECURITY_UPDATES false
FROM_LOCATION C:\Users\jeevan\Documents\My DAP Downloads\database
\install\../stage/products.xml
INSTALL_TYPE EE
MYORACLESUPPORT_PASSWORD Protected value, not to be logged
MYORACLESUPPORT_USERNAME
ORACLE_BASE
ORACLE_HOME
ORACLE_HOSTNAME COSMOS
PROXY_HOST
PROXY_PORT
PROXY_PWD Protected value, not to be logged
PROXY_USER
SECURITY_UPDATES_VIA_MYORACLESUPPORT true
SELECTED_LANGUAGES {"en"}
b_rdbmsInstall true
oracle.install.db.isCCRAuthenticationUsed false
oracle_install_LaunchNetCA false
oracle_install_NoMigration false
oracle_install_OCR_PartitionLocation
oracle_install_RACInstall false
oracle_install_RDBMSInstalling true
oracle_install_client_OraMTSPortNumber 49157
oracle_install_db_ASMSNMPUserPassword Protected value, not to be logged
oracle_install_db_AutoMemoryOption false
oracle_install_db_CharSetOption 3
oracle_install_db_CharacterSet
oracle_install_db_ConfigTabSelected 0
oracle_install_db_ConfigurationType &General Purpose / Transaction Processing
oracle_install_db_CustomInstall false
oracle_install_db_DiskGroupName
oracle_install_db_DiskGroupNameForASM
oracle_install_db_EMCentralAgentSelected
oracle_install_db_EMEmailAddress
oracle_install_db_EMSMTPServer
oracle_install_db_EnableAutoBackup false
oracle_install_db_InstallEdition EE
oracle_install_db_InstallOption INSTALL_DB_AND_CONFIG
oracle_install_db_InstallOptionSelected 1
oracle_install_db_InstallType EE
oracle_install_db_LaunchDBCA false
oracle_install_db_LaunchODMA false
oracle_install_db_LoadExampleSchemas false
oracle_install_db_MountPointLocation
oracle_install_db_QuickInstallOption false
oracle_install_db_ReceiveEmailNotification false
oracle_install_db_RecoveryBackUpLocation
oracle_install_db_RecoveryBackUpPassword Protected value, not to be logged
oracle_install_db_RecoveryBackUpUsername
oracle_install_db_SID
oracle_install_db_SecureConfigDisabled false
oracle_install_db_SetOracleBase false
oracle_install_db_StarterDatabaseType GENERAL_PURPOSE
oracle_install_db_StorageType 0
oracle_install_db_SuperAdminPasswords Protected value, not to be logged
oracle_install_db_SuperAdminSamePasswdForAll Protected value, not to be logged
oracle_install_db_SystemClass DESKTOP_CLASS
oracle_install_db_Type 1
oracle_install_db_UseDBControl true
oracle_install_db_UseFileSystemForRecovery false
oracle_install_db_UseSamePassword false
INFO: Launching Oracle Database 11g Release 2 Installer
INFO: Started executing the flow in INTERACTIVE mode
INFO: Waiting for completion of background operations
INFO: Finishing all forked tasks at state prepInstall
INFO: Waiting for completion all forked tasks at state prepInstall
INFO: All forked task are completed at state prepInstall
INFO: Completed background operations
INFO: Executing action at state prepInstall
INFO: Completed executing action at state <prepInstall>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <prepInstall>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <prepInstall>
INFO: Completed validating view at state <prepInstall>
INFO: Validating state <prepInstall>
WARNING: Validation disabled for the state prepInstall
INFO: Completed validating state <prepInstall>
INFO: Verifying route success
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state decideOCMInstall
INFO: Completed executing action at state <decideOCMInstall>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <decideOCMInstall>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <decideOCMInstall>
INFO: Completed validating view at state <decideOCMInstall>
INFO: Validating state <decideOCMInstall>
WARNING: Validation disabled for the state decideOCMInstall
INFO: Completed validating state <decideOCMInstall>
INFO: Verifying route requireOCM
INFO: Get view named [OCMDetailsUI]
INFO: View for [OCMDetailsUI] is oracle.install.ivw.common.view.OCMDetailsGUI@6da05bdb
INFO: Initializing view <OCMDetailsUI> at state <getOCMDetails>
INFO: Completed initializing view <OCMDetailsUI> at state <getOCMDetails>
INFO: Displaying view <OCMDetailsUI> at state <getOCMDetails>
INFO: Completed displaying view <OCMDetailsUI> at state <getOCMDetails>
INFO: Loading view <OCMDetailsUI> at state <getOCMDetails>
INFO: Completed loading view <OCMDetailsUI> at state <getOCMDetails>
INFO: Localizing view <OCMDetailsUI> at state <getOCMDetails>
INFO: Completed localizing view <OCMDetailsUI> at state <getOCMDetails>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state getOCMDetails
INFO: Completed executing action at state <getOCMDetails>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <getOCMDetails>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <getOCMDetails>
INFO: Completed validating view at state <getOCMDetails>
INFO: Validating state <getOCMDetails>
SEVERE: You have not provided an email address.
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Is this the problem????
Do you wish to remain uninformed of critical security issues in your configuration?
INFO: Completed validating state <getOCMDetails>
INFO: Verifying route success
INFO: Get view named [InstallOptionsUI]
INFO: InstallOptionsUI Entering Constructor
INFO: InstallOptionsUI Exiting Constructor
INFO: View for [InstallOptionsUI] is oracle.install.ivw.db.view.InstallOptionsUI@5ea07440
INFO: Initializing view <InstallOptionsUI> at state <installOptions>
INFO: Completed initializing view <InstallOptionsUI> at state <installOptions>
INFO: Displaying view <InstallOptionsUI> at state <installOptions>
INFO: Completed displaying view <InstallOptionsUI> at state <installOptions>
INFO: Loading view <InstallOptionsUI> at state <installOptions>
INFO: Completed loading view <InstallOptionsUI> at state <installOptions>
INFO: Localizing view <InstallOptionsUI> at state <installOptions>
INFO: Completed localizing view <InstallOptionsUI> at state <installOptions>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state installOptions
INFO: Completed executing action at state <installOptions>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <installOptions>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: InstallOptions UI Entering & Exiting processInput
INFO: Validating view at state <installOptions>
INFO: Completed validating view at state <installOptions>
INFO: Validating state <installOptions>
INFO: Completed validating state <installOptions>
INFO: InstallOptionsAction Actions.transition called
INFO: selectedInstallOption is :INSTALL_DB_AND_CONFIG
INFO: launchNETCA = true
INFO: Verifying route system_class
INFO: Get view named [SystemClassUI]
INFO: SystemClassUI Entering Constructor
INFO: SystemClassUI Exiting Constructor
INFO: View for [SystemClassUI] is oracle.install.ivw.db.view.SystemClassUI@164ca42b
INFO: Initializing view <SystemClassUI> at state <getSystemClass>
INFO: Completed initializing view <SystemClassUI> at state <getSystemClass>
INFO: Displaying view <SystemClassUI> at state <getSystemClass>
INFO: Completed displaying view <SystemClassUI> at state <getSystemClass>
INFO: Loading view <SystemClassUI> at state <getSystemClass>
INFO: Completed loading view <SystemClassUI> at state <getSystemClass>
INFO: Localizing view <SystemClassUI> at state <getSystemClass>
INFO: Completed localizing view <SystemClassUI> at state <getSystemClass>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state getSystemClass
INFO: Completed executing action at state <getSystemClass>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <getSystemClass>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: SystemClassUI Entering & Exiting processInput
INFO: Validating view at state <getSystemClass>
INFO: Completed validating view at state <getSystemClass>
INFO: Validating state <getSystemClass>
INFO: Completed validating state <getSystemClass>
INFO: selectedSystemClass is :DESKTOP_CLASS
INFO: Verifying route desktop_class_yes
INFO: Get view named [QuickInstallUI]

Sneak Preview sp11 Slim Java install hangs on J2EE Startup

I looked around at the other instances of this type of error, but they seemed to be slightly different issues (or at least, at differenst steps). Tried what helped them anyway, though it didn't really help.
My install hangs at the Start J2EE Engine (step 21 of 24 normally). It seems to retry every 20 seconds, but never gets anywhere and eventually pops up an error. I've retried from there, stopped and restarted, wiped out the whole install and tried again. I've repeated this for several versions of Java, the latest being the 1.4.2_08 version. They all get to the same part and die.
This is the error right before it gets into full swing on the waiting/retrying.
WARNING 2005-11-29 11:40:08
CJSlibModule::writeWarning_impl()
Execution of the command "C:\usr\sap\J2E\JC00\exe\startsap.exe name=J2E nr=00 SAPDIAHOST=ITLAP" finished with return code -1. Output:
STARTSAP failed
Details are written to C:\Program Files\sapinst_instdir\j2ee_wp\installdefault\startJ2E.log
That files says:
running C:\usr\sap\J2E\JC00\exe\sapstart.exe name=J2E nr=00 SAPDIAHOST=ITLAP -wait
SAPSTART finished successfully on ITLAP_J2E_00, but at least one process doesn't run correctly:
C:\usr\sap\J2E\JC00\exe\sapstart.exe=>sapparam(1c): No Profile used.
My os is XP, and seems to meet the min system requirements for the slim version.
Any ideas on getting over this hump?
Edit: After talking with someone at the ICC, turns out pretty much that I shouldn't be trying to install the slim version. So, time to go find a machine that can handle the normal Java install.
Message was edited by: Cortney Denver

Looking around at other experiences as well as my own several attempts (just tried an installation on XP several times this evening), none of this stuff works and SAP could not possibly care less. A clearly deeply flawed installation has been sitting around for 5 months now... one is left to wonder what highly specific conditions are required for success.
Good luck to you... I give up.

Solaris 10 Install Hangs at 15% on my HP DL 585?

Solaris 10 Install Hangs at 15% on my HP DL 585
I have taken out all the additional extra cards so I am left with the basic box, it has been configured to run in Raid 1 so my four disks become two.
I can still get it to bring up a shell and do other things, but the installer just appears not to want to go pass 15%
Help?

Which version of Solaris and how much memory do you have in the system.

7.5 install hanging at Checking Server Components

hi all,
I am installing BPC 7.5 on Windows Server 2008, and the install hangs at the Checking Server Components section. We are utilizing SQL server and Reporting Services on another server. Any ideas?

When you performed the installation did you run the setp like Administrator?
Into Windows 2008 you have to specify this when you are running any application.
Regards
Sorin Radulescu

Motion Content Install hanging at 100%

Hi, I just got Final Cut Studio 2.
The first installation disk ran smoothly, but after getting to 100% of Audio Content Disk 1, the install hangs and never finishes. This also happens when Im installing the Motion Content.
The DVD Studio Pro content went on without a hitch. (Iv yet to try Livetype)
Any idea why this is happening? Im installing all of the content to an external HD.
Thanks

Flakey install DVD?
Patrick

10.5.4 won't install-hangs on Configuring Installation

10.5.4 won't install-hangs on Configuring Installation and I have to force quit the installer. I've tried to wait it out for over an hour, but the progress bar never moves. This is with the Combo Updater. I've also tried using Software Update, but the progress bar for checking for new software stops about 3/4 of the way, and hangs forever. Any advice? Thanks.

Welcome to Apple Discussions.
Unfortunately such problems do occur for some people, not necessarily through any fault on the part of the user. Interruption of an update can cause problems for which there are solutions.
Which update was it?
Go to the Apple icon and select Software Update and see what it recommends if anything. Don't actually instal, rather just quit SU and let us know what the result is.
Secondly, open Disk Utility from the Utilities folder in the Applications folder. Select your hard drive in the LH column then Repair permissions from the lower part on the RH side of the window. It will take about 10mins to complete its task. If there is a list of permissions finishing with a message permissions repaired rerun this to make sure there are no more. See whether the odd behaviour continues.
If it does, insert the original installation dvd and restart holding the C key until the Select your language window appears. Do this & on the next window Select Disk Utility from the Tools menu. Again select your hard drive but this time choose Repair Disk. If there are repairs indicated and they are completed rerun this too to check that no more are needed. When this is finished rerun Repair permissions as well if there were any repairs carried out. Restart the computer normally and see how it all goes.
Neville

Portal Platform SR1 install hanging

Similar Messages

Maybe you are looking for