Portal Search doesn't work in Portal Applications forum.

Hi,
Can you mention what exactly is not working?
Thanks,
Vanathi

Similar Messages

Preview for an application doesn't work in Portal

Dear All,
Application 'hrrcf_a_candidate_profile_int' doesn't work in Portal IView in ECC 6.
Any reasons??
Thanks.

Hi,
What kind iView you created in Portal?
Have you the log of the error?
Regards
Eduardo

Cross catalog search doesn't work for CCM 2.0

Hi SRM gurus,
We are using SRM 5.0 and CCM2.0.
We created several CCM catalogs but cross catalog search doesn't work at all.
In the call structure, option "cross catalog" is correctly customized.
Are there additional check I have to do in order to see this cross catalog search working fine ?
It's quite urgent...
Thanks a lot,
regards,
Caroline

Hi
The TREX server (service) must started and be contactable by RFC - this can be checked by carrying out the actions listed above. (Refer OSS Note - 866547 Error when accessing TREX server for more details )
<b>Please have a look at the following SAP OSS Note, which will help -></b>
Note 851106 - Search in catalog from SRM leads to "Service not reachable"
<u>Other related OSS Notes</u>
Note 973594 Cross Catalog Search - Configuration
Note 894717 Items from Cross Catalogs Result does not appears in step 2
Note 803731 Cross-category search returns no result
Note 847137 OCI, cross-catalog search: detail display
Note 996885 Cross Catalog Search - Timeout while accessing MDM Catalog
1023487 cross-catalog-serach in portal opens up a duplicate window
1020025 Item detail display in Cross Catalog Search
1027352 Item detail display in Cross Catalog Search
Note 866547 - Error when accessing TREX server
Note 988427 - Update to TREX 6.1 Rev 27
Note 994623 - Hierarchy Buffer and BIA
Note 1030056 - Improvement in the Search within Results feature of CSE
Note 798988 CCM/CSE: Sorting sometimes returns no results
Note 778688 TREX_INDEX_MANAGER unit test update_view(): incorrect search
Note 808754 Display sequence of the characteristics is not changeable
Note 794325 - Error in OCI transfer in the BAdI /CCM/OCI_SCALEPRI
Note 745235 Search ability changes to cross-catalog characteristics
Note 724097 - Search of the comp. in case of structured characteristics
Note 743643 Search ability change in cross-catalog characteristics
Note 847551 Displaying date, time, and timestamp in the CSE
Note 750756 Program for the deletion/clean up of TREX indexes
Do update me as well.
Regards
- Atul

E72 - Contacts quick search doesn't work correctly

Hello!
I have over 1,500 contacts in Outlook and has successfully synchronized them with Nokia E72 (last firmware). But quick search in Contacts application simply doesn't work - I can find only few contacts - others just dissapear when I start typing correct letters.
I tried to kill the process of this app and restart Contacts. Voila, it works correctly! But then in 5 min. I tried again and got just the same problem.
Desktop quick search doesn't work too.
I've already tried to reload all the contacts in my phone - no results.
What would you advise to solve that problem?
Thanks in advance.

The E72 Is from the most point of views a complete and very good phone.
But this bug drives me crazy!
Zam72 is completely spot on: Pathetic, Killer Feature, frustrating.
I've done som more testing:
Started with a quick search from home screen, found the contact I was lookng for.
Made a Mail for exchange sync. Same search, no hits. (thought I found the issue...)
Reboot, speed search work again.
New Mfe sync, search still works, repeated a couple of times, still ok.
Two hours later: Search still works
New mfe sync, search once again goes blank!
Now i'm noticing that when I open the contacts, I can browse the contacts, but if i enter a letter it first appears, but directly disapears making search impossible.
I'M NOT ABLE TO USE THIS PHONES CONTACTS!!!!!!
I believe this is related to Mfe synchronizations, but it's a random issue.
Yes, I've tried a *#7370# with no luck.
I'm not using PC-suite sync at all (no conflicts)
I'm not running other programs simultaniously.
I feel like a Beta tester!

Mac Mail Version 6.0 (1486) has stopped recieving mesages regularly and the search doesn't work

Mac Mail Version 6.0 (1486) has stopped recieving mesages regularly and the search doesn't work.
Since installing Mountain Lion, Mail seems to be very unresponsive. I have mac mail running on an iMac (which works fine) and a 2012 MacbookPro which is the one having the issues with the Mail app. Both computers are running on Mountian Lion.
When I scroll up in Mail for instance, the frame rate drops to about 5 a second.
When I click on a message it doesn't display it in the preview pane. Which is very annoying!
But I can get around the issue by double clicking on a message and it opens up the message in a new window.
When I search for a message, nothing appears in the results. Even if Im searching for something that is defiently there, eg if I type in my name, you'd think some results would come up. But when I click on something else, the results dispaly for about half a second. Bizarre. Is anyone else having this problem?

what kind of error in browser you are seeing?
is search service application never starterd or its started but cannot crawl?
did you see the timer jobs related to search services and what's their status?
so what about the search results from site collection?
also make sure this service "SharePoint Search Host Controller Service" started on all servers in the farm.
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog
In the browser I receive the following error:
The search service app is running, doesn't crawl:
Yes, I can see the timer jobs related to search services, some of them are Succeded, others are Scheduled.
The service SharePoint Search Host Controller Service is started in the first server of the farm, but not in the second
one. When I try to start it, I receive the following error:
Windows could not start the Sharepoint Search Host Controller Service on Local Computer. Error 1067: The process terminated unexpectedly.
Melvintt
MCTS, Windows Server 2008 R2: Network Infrastructure
MCTS, Windows Server 2008 R2: Active Directory, Configuring

Webflow doesn't work with Portal 7.0

Hi, there
We are migrating from Portal 4.0 to 7.0.
After migration, the webflow which we were using for
web application doesn't work anymore.
We use datasync app to find that within Master Repository
there is no webflow for our web app, but the webflow for 'tools'
does exists. BTW, we double check the Oracle DB, all the webflow
were synced to there by EBCC7.0.
In the datasync console, the Schema URI filter seems to be not
correct. In Registered Data Repositories, we can not find correct
Webflow Data Repository.
I attached the exception from console:
<Aug 14, 2002 11:43:54 AM EDT> <Error> <Webflow> <401200> <Error while parsing
uri /esdi/application, path null, query s
tring null - Webflow XML does not exist, is not loaded properly, or you do not
have a configuration-error-page defined.
Exception[com.bea.p13n.appflow.exception.ConfigurationException: The configuration-error-page
node was not found in the
webflow xml file. for webapp [esdi], namespace [sampleapp_main]. While trying
to display CONFIGURATION ERROR: [Exception
[com.bea.p13n.appflow.exception.ConfigurationException: Bad Namespace - namespace
[sampleapp_main] is not available for
webflow execution. Make sure the [sampleapp_main.wf] file is deployed in webapp
[esdi].]],]
Any help would be great appreciated!
Harry
[email protected]

Harry,
This sounds very similar to a customer that had not fully completed the
upgrade to 7.0 - they had a 4.0 copy of the WebflowServlet JAR within their
application. Please triple-check that ALL your JARs (taglibs, web apps etc.)
are the 7.0 versions.
Sincerely.
Daniel Selman
"Harry Yu" <[email protected]> wrote in message
news:[email protected]..
>
Hi, there
We are migrating from Portal 4.0 to 7.0.
After migration, the webflow which we were using for
web application doesn't work anymore.
We use datasync app to find that within Master Repository
there is no webflow for our web app, but the webflow for 'tools'
does exists. BTW, we double check the Oracle DB, all the webflow
were synced to there by EBCC7.0.
In the datasync console, the Schema URI filter seems to be not
correct. In Registered Data Repositories, we can not find correct
Webflow Data Repository.
I attached the exception from console:
<Aug 14, 2002 11:43:54 AM EDT> <Error> <Webflow> <401200> <Error whileparsing
uri /esdi/application, path null, query s
tring null - Webflow XML does not exist, is not loaded properly, or you donot
have a configuration-error-page defined.
Exception[com.bea.p13n.appflow.exception.ConfigurationException: The
configuration-error-page> node was not found in the> webflow xml file. for webapp [esdi, namespace [sampleapp_main]. Whiletrying
to display CONFIGURATION ERROR: [Exception
[com.bea.p13n.appflow.exception.ConfigurationException: Bad Namespace -
namespace> [sampleapp_main is not available for
webflow execution. Make sure the [sampleapp_main.wf] file is deployed inwebapp
[esdi].]],]
Any help would be great appreciated!
Harry
[email protected]

Change notification E_mail text doesn't work in Portal 7.0

I am changing notification E_Mail text accroding this link:
<a href="http://help.sap.com/saphelp_nw04s/helpdata/en/33/d494c86203ea40b7b44ddd471baab1/frameset.htm">http://help.sap.com/saphelp_nw04s/helpdata/en/33/d494c86203ea40b7b44ddd471baab1/frameset.htm</a>
But it doesn't work.
and I have a question ,
where should I saved the file 'com.sap.security.core.util.notification.notificationTexts_language_zh_CN.properties' in the Portal server.

Since you have not provided a more detailed desription of what is not working, and what is at error and what you assume the desired output to be for the specific user(s), I can only recommend you check the following:
1.) The email parameters are being configured per language. As such the user you are testing with needs to have the same default portal language assigned. Either by default or by personalisation.
2.) The 'com.sap.security.core.util.notification.notificationTexts_language_zh_CN.properties' file you are using may be referencing a notificationTexts_cn.properties language entry. Check the language installations are named the same and be aware this can be case sensitive.
3.) Ensure that you have the entry in the config tool in the same case.

Installer doesn't work for any application

The installer app itself is not working on my mac (Macbook Pro, running Version 10.8.5), and it doesn't work regardless of the software that I'm trying to install.
I get the following error message:
Installer cannot be opened because of a problem.
Check with the developer to make sure Installer works with this version of OS X. You may need to reinstall the application. Be sure to install any available updates for the application and OS X.
Any help/suggestions?
MacBook Pro, OS X Mountain Lion (10.8.5)

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Click the Clear Display icon in the toolbar. Then take an action that isn't working the way you expect. Select any lines that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name or email address, may appear in the log. Anonymize before posting.
When you post the log extract, you might see an error message on the web page: "You have included content in your post that is not permitted," or "The message contains invalid characters." That's a bug in the forum software. Please post the text on Pastebin, then post a link here to the page you created.

Search doesn't work in generated WebHelp

I am using RoboHelp10 as part of TCS4.
If I generate Microsoft HTML Help, the .chm file produced has perfect search capability. However, if I generate WebHelp, no matter what I search for, nothing is found. (Obviously I'm searching for words which I know exist. Even a search for "the" results in the usual "No topics found".)
I don't think it should matter at all, given that HTML Help has a working search, but my project has been created from DITA using DITA2Go. I then import the .hhp file into RoboHelp and generate. The reason for going through DITA2Go rather than processing my ditamap directly in RoboHelp is that the .xml files contain context-sensitive help elements which are ignored by RoboHelp when processing the ditamap. Everything works great with this method except that search isn't working.
I would be very grateful for any suggestions about what could be going wrong here.
Thank you in advance!
Heather

Well, I guess I'll reply to let everyone know that this has not been resolved, but I have found a different and better methodology. I have been able to import my ditamap directly into RoboHelp which uses the DITA Open Toolkit in the background. The reason I didn't do that before was that I needed access to my context-sensitive help elements. I have since discovered that I can create an alias text file myself instead of relying on DITA2Go to create it for me. It's a pain to create, but once it's done I can reuse it everytime I import my ditamap into RH by copying it into the project folder. I can then continue using RH as usual and the CSH works from our application.
So in summary - I don't know why search wasn't created before. However, if you want CSH using DITA and RH, there is another option.

Since 2.2.1 upgrade, force quit doesn't work after an application freezes

Sorry if this was posted before, but I couldn't find a post that matched my issue.
Has anyone else noticed that since upgrading to 2.2.1 on the 3G, if an application freezes, force quit doesn't work. I have to do a hard reset inorder to get the OS to respond again. Even tried to just hold the power button to do a power off and it doesn't respond.
Any advice? Tried restoring to 2.2.1 many times didn't help.

Thanks for the response. I have done a many restores as "new iphone" and reinstalled apps. I normally get freezes when I'm in a twitter type application and using the "mini/lite safari browser" within the twitter app.
When the phone doesn't freeze, I can force quit apps at will. It's only after a freeze (when I need force quit the most) does it not work....
I would make a Genius Bar appointment but I can't recreate it at will.

Mail search doesn't work well after changing mail file to another drive

Hi, I need some help making the search in mail work for Mountain Lion. After I changed the mail folder to a new drive, SSD, creating an alias, everything works fine for mail except the search. When I search most of the times I get back emails that I received before doing the change.
I already tried at rebuilding the mailboxes, and also I erased the Envelop index files, and they rebuilt themselves, and still the search is not working properly for the emails I have received since I changed the mail files to the new drive.
Other than that the mail program is working well and as I work a lot with search I am experiencing a loss of productivity.
I wouldn't like to revert it to the old drive, as the new drive is SSD and goes much faster for the big size of my mail fines.
Thank you for your help !
Javier

Apple doesn’t routinely monitor the discussions. These are mostly user to user discussions.
Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Feedback
Or you can use your Apple ID to register with this site and go the Apple BugReporter. Supposedly you will get an answer if you submit feedback.
Feedback via Apple Developer

Help with fuzzy search (doesn't work if change order of certain 2 letters)

Hi,
need some help with fuzzy search. It's pretty simple - we use fuzzy search on varchar2 columns that contain first name and last_name. The problem is that i don't really understand why it can't find name in some cases.
Say i want to search for 'Taekpaul'. Then
where CONTAINS(first_name,'fuzzy(TAEKPAUL)',1) > 0 - works
where CONTAINS(first_name,'fuzzy(TAEKPALU)',1) > 0 - works (changed order of the 2 last letters)
where CONTAINS(first_name,'fuzzy(TEAKPAUL)',1) > 0 - doesn't work, finds 'Tejpaul' that is completely unrelated (changed 2nd, 3rd order)
How can i make it find 'Taekpaul' even if i search for TEAKPAUL? Is it related to index? Like Text index should be created with some different parameters?
Thanks!
Edited by: Maitreya2 on Mar 3, 2010 2:08 PM

Thanks, adding '!' worked :)
Do you know where i can read more about '!' and other special characters? I think i didn't see anything like that here: http://download.oracle.com/docs/cd/B14117_01/text.101/b10730/cqoper.htm#BABBJGFJ
I also started using JARO_WINKLER_SIMILARITY function that is actually better i think for what i do. But it's very buggy - sometimes Oracle crashes and kills connection when you try to use it.
Ahha, it's here: http://download.oracle.com/docs/cd/B19306_01/text.102/b14218/cqspcl.htm
So, ! is soundex. Whatever it means..
Edited by: Maitreya2 on Mar 5, 2010 12:14 PM

Catalog Search doesn't work for Catalog type BI EE

Hi, All!
Just noticed an issue with catalog search functionality in BI Publisher application: If BI Publisher uses BI EE catalog type, then search never returns results, always says nothing was found. But when i change catalog type to Filesystem and restart Publisher, then search works fine and finds needed reports.
Tested this on 11.1.1.5 and 11.1.1.6. Can someone confirm this behavior? Or maybe this is known issue and you can advice some fix/workaround? Would be much appreciated, thanks!

Hi,
I can able to reproduce the same in my environment.
Oracle BI Publisher - File system - Search option working fine.
Oracle BI EE - catalog - Search option not working always showing "did not match any documents".
Rgds
Aarvi.

Finder search doesn't work

Hi there,
on my system (Mac Pro, Tiger, 10.4.11) the search function in the finder doesn't work anymore.
I tried almost everything: Onyx, all the mdutil stuff for re-indexing, everything worked fine but it doesn't solve the problem. Spotlight itsself also workes properly but I need the search function in the finder due to another program (Snapper) I'm working with, so alternatives like EasyFind are also no solution for me.
When I enter a search and start it, it never finishes (in the right bottom corner always the turning circle and the message "searching"). Doesn't depend on which harddrive or in which folder I am searching.
Any suggestions??
Thanks a lot!
Benjamin

Verified the drive with Disk Utility to ensure there aren't directory issues?
Try starting in Safe Mode. Does it work in SM? How about after a reboot?:
[Mac OS X: Starting up in Safe Mode|http://docs.info.apple.com/article.html?artnum=107393]
[What is Safe Boot, Safe Mode? (Mac OS X)|http://docs.info.apple.com/article.html?artnum=107392]
[Safe Boot takes longer than normal startup|http://docs.info.apple.com/article.html?artnum=107394]
[Mac OS X 10.4, 10.5- Computer shuts down during Safe Boot|http://support.apple.com/kb/TA24054]
Safe boot mode runs a directory check command similar to that used by Disk Utility's repair. In Tiger it ignores some stored information (cache) that is normally read that speeds up the boot process, and it moves some other caches to the trash. It also uses only System fonts and disables all Startup Items, third party items, and any Login Items.

UNC search doesn't work?

One thing that I have noticed since the Developer Preview is that I am no longer able to type a UNC path into the search bar under the start menu. Doesn't work if I'm going \\servername\sharename\filename.ext and it doesn't work if I go driveletter:\filename.ext.
That isn't just on mapped network locations - that doesn't even work if you want to go to c:\users.
How many people actually go through Windows Explorer to navigate to locations? Not me. This would be a deal breaker for me.
Is there a fix? A hidden option that for some reason is not set by default like EVERY other iteration of Windows? Bueller?

Hi,
Based on my test, UNC path really doesn't work in Search Box. Up to now, I doesn't find any solution with this problem, hope it could be fixed in the future.
On the other hand, opening a file which locate on specific local drive through Search Box should be work. Such as when I want to open a test.txt file on C drive through Search Box, when I type C:\test.txt, the txt file could be opened successfully.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Portal Search doesn't work in Portal Applications forum.

Similar Messages

Maybe you are looking for