Portal shows different amount of data for different users

hi
please give me why this is happening...
when the user logs into the GUI he can see the whole screen containing 10 inputfields but in the portal one user is able to see the whole of the page while the ohter is able to see only the first 7 input screen.....
why is this happening...
is it related to some undocumented check over the content or it is a problem of how the system was defined over portal landscape in system administation....
reply asap. points assured for helpful answer

Hii .....am a student and am interested in learning SAP BASIS . Can any body forward me the documents for SAP BASIS.
Thanks

Similar Messages

MB5B showing diff data for diff users

Dear All,
At my client side in standard report MB5B for one user data for particular material is coming while for another user
it is showing no data.
I have checked authorization object in SU53 but it is having no problem.
Roles,parameters and profiles are correct in both.
Also i have checked all materials in MB5B for both users and found the materials which are having nil stock in current
date are not showing data for that user while for other user it is showing data.
What could be the reason and what changes are required in user profiles??
Thanks,
Naren

Thanks Ajit....in category it was not tick..
Naren

Can you limit the amount of data accessed per user on an AirPort Extreme?

Can you limit the amount of data accessed per user on an AirPort Extreme?

Your question was whether the AirPort Extreme is able to establish data limits per user.
If you add another router that has this type of capability or install software on another router, then you will be able to establish data limits for each user. The AirPort Extreme will have no control over this.

Is there any object in labview that contains a list of data for the user to select (selection one at a time) or add a new data?

Is there any object in labview that contains a list of data for the user to select (selection one at a time) or add a new data?

List and table controls -> listbox..is that what you are thinking of?
The listbox presents the user with a list of options, and you can set it to only accept one selection at a time...Adding new data to the list can not be done directly by the user but if you make e.g. a text control and a button you can programatically insert new objects described in the text box when the button is pressed...(see example).
If you need more than one column you have the multicolumn listbox. If you want the users to write new entries directly yu can use a table and read selected cells using it's selection start property to read what cell has been selected.
MTO
Attachments:
Listbox_example.vi ‏34 KB

After a quiz can you show the questions and answers for the user to review from passing the quiz

After taking a quiz, is there a way to show the questions and answers for the user to review from passing the quiz.
And the ones who has failed the quiz would be directed to the first slide again to take the quiz over.
Thanks

Rod
I see that information about adding the review quiz button but on that last slide where it shows results, I want it jump back to slide 1 but it jumps to the first question of the slide. Is there a way around that?

Save persistents data for all users

Hi
The persistent datas are save for one specified user, the user logged in into the system (e.g. Windows).
Is it possible to save persistent data for ALL users?
If yes how?
Thanks
Hans

Hi Hans
IMO it might be a bit tricky. As you know - Persistence objects are stored in databases. I presume you're not asking about document database. Second database is stored in SavedData file which is located in per user data directory. I.E. on mac in ~/Library/Caches/Adobe Indesign/Version 6.0/en_US/Indesign SavedData
Probably you need to create your own implementation of persistence or take a look on relations between file system and IDataBase interface.
Regards
Bartek

Appointments are showing off by one hour for Yahoo users

Ok, I know there have been a few responses to this, but none seem to fit the exact issue I am having, so I'm going to ask again.
I have two users in particular, one on Outlook 2010 and one on Outlook 2013. They have hosted Exchange, and the Exchange server is 2007. The Exchange host provider is located in the Central Time Zone. Computers for my users are all set to correctly to Eastern
Time Zone. Windows 7 and 8.1 machines with all updates installed are what the users are using. I also logged into the hosted OWA option and set the time zone to EST there as well.
When I send an invite from Outlook 2010 user to another Exchange server, meeting time in the email invite BEFORE accepting shows the correct time zone for that user, and stays correct when accepting. When I send an invite to Gmail, again, shows
correct time before and after accepting. When I send to a Yahoo account, it shows the time one hour behind before accepting - essentially shows the CST time. Once I accept the meeting in Yahoo, it shows the correct time in the Yahoo calendar, but the email
with the invite still shows the wrong time, one hour earlier. And obviously if the user doesn't accept the invite but just uses it as a guide, they will show up one hour earlier.
Is this an issue for Yahoo, or Exchange 2007? It might be possible to move my client from Exchange 2007 to 2010 or 2013, but I don't want to do that if it won't fix the problem.

Should be an issue with the time zone settings on all Outlook clients involved.
Has Gmail/Yahoo account mentioned here been configured into Outlook clients?
If you are using Outlook 2010 you need to use a time zone with the correct DST settings for your location. If your location does not observe DST, do not choose a time zone that does then deselect the option to automatically update for daylight saving time.
You need to use a time zone that does not observe DST.
http://www.slipstick.com/outlook/calendar/meeting-requests-and-appointments-are-off-by-one-hour/
Kapaal

What is the MAX amount of DATA for JDBC?

Hello,
Did anybody had any expericence with how jdbc works with large amount of data SAY
> 1/2 GIG or more?
Any help apprecieated
Thanks.
Paul

Always depends on the driver implementation. Each
driver/database combination deals with massiveamounts
of data in a single transaction differently. Canyou
be more specific? In general Most Drivers of
commercial grade quality and/or shipped with the
top
5
RDBMS have pretty solid implementations limitedsoley
by network bandwidth to carry this info. A good
developer however will not rely on the driver to
manage this much info and will develop a scheme
to
minimize the impact of such large data transferson
an
unsuspecting database or client.
LThis is what I thought. I just need moreinformation
if for example I have a JAVA process which feedsdata
from RDMBS and the amount of data the processreceives
SAY 2GIG My guess this all get in "ResultSet"object
and thus all feeds in VM( memory) so I have to
designing my process SUCH that it takes only asmall
sample of data and iterate this until I get all the
information from my query. Ex.
select * from test where data between 1 and 2000000;I
have to brake this down by "DAYS"
so my code will be something like
for (int i=0 ;i<2000000 ;i++) {
String select=null;
select="select * from test where data="+i+;
do( something else)
Am I close far? Is there another way that may beJDBC
driver handless this behind scenes?
Well personally I think you should be structuring your
SQL better than that. Making 2000000 calls over a
network in a for loop is suicidal..and lets not forget
how something like that will block your application.
First you can do something like "select * from test
where data <= 2000000" in one shot. Now you get the
whole set and you can scroll through and do your
operation ( of course this is slow too, but its much
better than running the query 2000000 times ).
the other thing you have to consider is : is it
necessary to really block during an operation like
this? Can it be done in another thread? a daemon
process even? Some service which can be polled for
results when needed?
This is a tricky example and I'd be interested to know
more about what you are trying to do.
When you were talking about large data I was under the
impression of something like a blob, clob, or any sort
of single query with 2gb of data in the result.
Can you break up your query? Doing things in batch in
an alternative thread can yield to other processes
perhaps?
Loh, and also: Can the Database itself take care of this business? Stored Procedures and Internal Functions are all built to handle massive amounts of data with minimal impact. Can you leverage the technology within the Database to accomplish your goal? Sometimes a well written procedure can save you tons of work in your business logic tier.
The right tools for the right job..
L

Management Portal unavailable - "cannot load management data for this resource type"

Noticing that with the exception of virtual machines, every resource type in the (non preview) Azure Management Portal is showing a sad pink icon and the help text "cannot load management data for this resource type."
So that's a near total portal outage for us. Anybody else experiencing this?
I've attempted to open a ticket with developer support but I'm not sure if that's the right channel.
Brian

Hi Brian,
Thanks for your posting!
From Dashboard shown (http://azure.microsoft.com/en-us/status/#history), Currently, the Azure portal works fine in every regions.
So I suggest you can submit a tick via this channel:
http://www.windowsazure.com/en-us/support/contact/
Also, you can click your right-top account name and select the "Microsoft Support" item to create free ticket.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

TS3992 My Icloud back up shows huge amount of data stored from back up yet listed as incomplete. Unable to access data. Is data lost

My ICloud backup shows a huge amount of data stored, yet it is listed as incomplete backup. I am unable to access the backed up data. Is the data lost?
Thank you in advance for your assistance.

Unfortunately, if an iCloud backup is incomplete you can't access any of the data in it. The only way to access anything in the backup is to restore the entire backup, which can't be done if it is incomplete.

Invalid Subject error showing different user name

I am getting an Invalid Subject error when some of my users attempt to login. It doesn't happen to all users and sometimes the users we have been seeing the problem with are able to successfully login. The weird part is that we print out what user is attempting to login (by retrieving the subject) but the error message we get back is for a different user... what could be getting confused so that it is using the subject from another user even though we know we had the correct subject returned ?
I have searched the forum and some people have had similar problems when servers/domains/JMS queues did not have unique names. I verified everything we run is uniquely named. We are running WL9. Here is an example error from our logs:
< login():Username:exampleUser Principals:[exampleUser, group1] >
<Warning> <RMI> <machine> <server4> <RuntimeException thrown by rmi server: weblogic.jndi.internal.AdminRoleBasedDispatchServerRef@9, implementation: 'weblogic.jndi.internal.RootNamingNode@5429f96c' oid: '9', implementationClassName: 'weblogic.jndi.internal.RootNamingNode'
java.lang.SecurityException: Security:090398 Invalid Subject: principals=[differentUser, group1].
java.lang.SecurityException: Security:090398 Invalid Subject: principals=[differentUser, group1]
at weblogic.security.service.SecurityServiceManager.seal(Unknown Source)
     at weblogic.security.service.SecurityServiceManager.getSealedSubjectFromWire(Unknown Source)
     at weblogic.rjvm.MsgAbbrevInputStream.getSubject(MsgAbbrevInputStream.java:316)
     at weblogic.rmi.internal.BasicServerRef.acceptRequest(BasicServerRef.java:850)
     at weblogic.rmi.internal.BasicServerRef.dispatch(BasicServerRef.java:314)
     at weblogic.rmi.cluster.ClusterableServerRef.dispatch(ClusterableServerRef.java:236)
     at weblogic.rjvm.RJVMImpl.dispatchRequest(RJVMImpl.java:1084)
     at weblogic.rjvm.RJVMImpl.dispatch(RJVMImpl.java:1001)
     at weblogic.rjvm.ConnectionManagerServer.handleRJVM(ConnectionManagerServer.java:240)
     at weblogic.rjvm.ConnectionManager.dispatch(ConnectionManager.java:877)
     at weblogic.rjvm.MsgAbbrevJVMConnection.dispatch(MsgAbbrevJVMConnection.java:446)
     at weblogic.rjvm.t3.MuxableSocketT3.dispatch(MuxableSocketT3.java:368)
     at weblogic.socket.AbstractMuxableSocket.dispatch(AbstractMuxableSocket.java:383)
     at weblogic.socket.SocketMuxer.readReadySocketOnce(SocketMuxer.java:872)
     at weblogic.socket.SocketMuxer.readReadySocket(SocketMuxer.java:818)
     at weblogic.socket.DevPollSocketMuxer.processSockets(DevPollSocketMuxer.java:120)
     at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
     at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117) >

Did some one get answer for this?
Please let me know.

SEM-BPS how to load additional data for special users at runtime?

Let´s assume you have a transactional info cube which contains SD Data from the source system.
If you want to show additional data, let´s say the attributes of the sold materials which can be read in the table MARA of the source system (provided you use R/3, etc.)
and you only want to show this data for a small amount of users, which need to see it, then i wonder how to do this.
am i right, that i can use the exit functions to init key figures, i.e. i could write some code which connects to the source system over RFC, downloads the data at runtime and presents it at the users excel sheet????
moreover, is it necessary to extend the existing cube, just to achieve this aim?
Message was edited by: Gideon Lenz

Hello Gideon,
there's no need to program anything. You can display any attribute in planning layouts. In your case you would extract the master data from material from SAP R/3 (MARA) into BW. The setup the layout to show the required attribute(s) in the layout in BPS.
If the attribute is relevant only for a specific user group, just give them access to this "special" layout (create a planning folder or web interface for this group).
Regards
Marc
SAP NetWeaver RIG

ALV report shows fixed number of columns for a user ?

Hello,
I have an issue wherein I have created an ABAP ALV grid display in a WD ABAP application and hosted it onto portal. Now, all the users can see the correct number of columns for the report which are determined dynamically. But just for one user, irrespective of which report she launches it shows her only 4 columns.
Can anybody suggest why this kind of behavior.
Appreciate your help.
Regards,
Samta.

Hi,
Right, click the button "manage layout" or "save layout" and remove any default user settings...
added: didn't read carefully sorry ;)... better check user settings in SU01 if no ALV parameter is used.
Kr,
m.
Edited by: Manu D'Haeyer on Oct 21, 2011 8:53 PM

MSS PCR form not pulling data for a user

Hi All,
On Organizational/Position Change Form(on Portal) one of the user don't see the data in the dropdowns in this form.
But for other users it is working just fine. The user not able to see the data in drop down can access other PCR's.
I was wondering if there is a way we can test the form for the same user in the backend. If we can test him in the backend and the values are being populated for this user then there is a Portal problem.
Can you please tell me how can we test this form for this user in the backend.
Thanks in Advance,
Joe

hi ,
You can put external breakpoint in the BADI method and try debugging it by opening adobe form from
portal.
thanks ,
sahiba

Regd : How to find Validity date for a user in central user system

Hi Experts;
I want to get the list of users with profile SAP_ALL with following details like validity ,user type ,user name ,user id..
I can get through SUIM for each individual systems.Its very difficult to login to each system ,generate the report.So I prefered to go for Central system
But if I use central user system I have no option to find validity and user type for the system ( SUIM - > Cross system application )
I have also tried to the table USRO2 ( which gives only the list of users in the central system )
So is there any possible ways to find the Users with profile SAP _ALL with validity date in the central user system. So that I can easily generate it as one report instead of logging to each and every system
Regards
Sanjeev.S

Hi Ruchit
Thanks for your reply. I want to find the validity date of all users having SAP_ALL
profile of all child system connected through central user system .So it is possible
to do that in Centrals System by executing the report?
If I execute that report in Central user system will it give the details of all child
system connected to central system
I think it will give only the result of Central system and not the child system connected to Central system.Please clarify me.
I can execute the report by logging to each child system ,but it takes very long hours for me since there are many system in my landscape.
Awaiting for your reply.'
Thanks
Sanjeev.S

Restrict data for a user profile

Hi,
I've made a jsp application where i implemented a users profiles for the screens, so i defined that user x can access to the jsp y in insert mode but can't access in remove mode.
But now i need to implement a second profile that restrict the data that the user can see, like a Portuguese user can only see Portuguese citys and i don't know what is the best way of doing this, i'm using a BC4J.
Any ideias
thanks in advanced
rjc

Hi,
Not exactly sure the exact details of what you are trying to achieve, but when the user logs in you can create a session variable that can be retrieved during the user's session. You implement this by using:
session.setAttribute(String attrname, String attr)
Then you can retrieve the attribute at a later time. So on your jsp page (I'm not sure of your table structure) you can do something similar to this:
<%String whereclause = "Country=" + session.getAttribute("Country");%>
<jbo:ViewObject id="CityView" whereclause="<%=whereclause%>">
Hope this helps....
A
Hi,
I've made a jsp application where i implemented a users profiles for the screens, so i defined that user x can access to the jsp y in insert mode but can't access in remove mode.
But now i need to implement a second profile that restrict the data that the user can see, like a Portuguese user can only see Portuguese citys and i don't know what is the best way of doing this, i'm using a BC4J.
Any ideias
thanks in advanced
rjc

Portal shows different amount of data for different users

Similar Messages

Maybe you are looking for