Portal Theme does not reflect on Identity Management  Iview...

Hi Gurus,
I have a bit of a problem. I've changed the Portal Theme and all seems to be fine except for the fact that the Identity Mgt Iview and Import user iview dont take the custom theme colors. Both have the value "ur" on the stylesheet propertie. Please help, i have looked the theme editor over and over again and i dont know how can i solve this.
regards,
MC

Hi all,
Yeap, I cleared the browser cache, we restarted the server (which released any cache of the portal application)...etc etc and nothing happen. Please help... we dont know what else should we have to do...
Regards,
MC

Similar Messages

  • Error When creating Broadcastings "Portal theme does not fit output format"

    Hi All,
    When i create a Broadcasting Settings i am getting an Error saying "Portal theme does not fit output format", and below is the detailed that we are getting,
    "Diagnosis
    You used separate portal themes to generate PDF or print formats (PS or PCL). The output format that you selected is not appropriate for the portal theme currently set.
    System Response
    The broadcast setting is not consistent and you cannot save or execute it.
    Procedure
    Change the output format or the portal theme correspondingly. (The portal theme is set to the first valid value for the current output format when you display the corresponding tab page).
    Procedure for System Administration
      Notification Number RSRD 640"
    Can anyone help how to resolve this issue?
    Regards,
    Muruganand.K

    Would you have chance to provide me the sollution...
    We are facing the exactly the same error message
    Thanks a lot in advance
    Regards
    Ivan

  • User created in ECC system does not appear in Identity management

    Hi all,
    For the already new built GRC system, I am trying to configure buidling blocks 678: RiskAnalysis and Remediation.
    1- In section 5.2 (5.2     Add Roles to Existing Users in User Management Engine) I have to add roles to the users which were created in ECC system. But in Identity management I could not see those ID's existing.
    2 - I could not see these roles RE_ADMIN and CC_ADMIN in UME
    Could anybody help me moving forward.
    Thanks
    Lakshmi

    Hi,
    > 1- In section 5.2 (5.2     Add Roles to Existing Users in User Management Engine) I have to add roles to the users which were >created in ECC system. But in Identity management I could not see those ID's existing.
    >
    Have you defined Master User Source in RAR ?
    > 2 - I could not see these roles RE_ADMIN and CC_ADMIN in UME
    >
    Initially you have to upload Roles in Identity management. There will be 3 files:
    cc_ume_roles.txt
    ae_ume_roles.txt
    re_ume_roles.txt
    Upload them in identity management then you will get these roles.
    Thanks
    Sunny

  • Updating Flash Player Does Not Reflect In Add-Ons Manager or Plug-In Check

    The add-ons Manager shows I have Flashplayer version 11.3.300.265. The Plug-ins Check shows there is an update, and I downloaded and installed Flash Player version 11.3.300.268. Six times! Each time, the installation shows as successful on the Adobe site, but FF14 does not reflect the new version, and the Plug-in check continues to insist that the version is out of date.
    I had no problems whatsoever updating to the latest Flashplayer version in IE (8). But FF is once again giving me trouble with this.
    In addition, the add-ons manager shows a version of Flash 9.0.45.0, last updated Feb 20, 2007. There's a big red warning that it's out of date. This is in addition to Shockwave Flash (the correct one) and Shockwave for Director (which is current). It's been like this for awhile, and I disabled the antique version of Flash and it does not affect FF or Flashplayer performance.
    I tried deleting my plug-ins database, but I just get all the same info when it is rebuilt. Any suggestions or solutions would be appreciated.

    Such old version are usually located in the plugins folder in the Firefox program folder (C:\Program Files\Mozilla Firefox\).
    You can enable the plugin and verify the path on the about:plugins page.
    You can set the plugin.expose_full_path pref to true on the about:config page to see the full path of plugins on the about:plugins page.
    *http://kb.mozillazine.org/Issues_related_to_plugins#Identifying_installed_plugins
    *http://kb.mozillazine.org/about:plugins
    *http://kb.mozillazine.org/about:config
    It is best not to leave that pref set to true as it exposes that full path to web servers, so reset that pref to false after you are done with the about:plugins page.
    See "Manually uninstalling a plugin":
    *https://support.mozilla.org/kb/Troubleshooting+plugins

  • URGENT: Does ALBPM support RadiantOne Identity Management?

    Hi Expert,
    Please help to answer this question.
    1. Does ALBPM support RadiantOne Identity Management?
    2. What is the standard protocol to configure to RadiantOne?
    3. Any documentation on Identity Management Configuration?
    Thanks

    Hi All,
    SAP support have confirmed the following.
    SAP NetWeaver has some federation capabilities with varying
    support in different components (SAML 1.1) SAML 2 support
    is planned in a future release.
    SAP NetWeaver Identity Management does not have federation
    support on its own. This could be introduced in future releases.
    Does Any one know how SAML 1.1 support Federation capabilities?  Which all sap netweaver platforms have them?

  • Theme does not load completely

    Hi
    The theme does not get loaded completely into the Portal page when we click on the links to the WebDynpro ABAP ( eg. ECC, BW). Also the portal font gets distorted. And this happens 50 % of the time. We have to log back in and try our luck.
    Any ideas why this would happen very often? Please let me know.
    Thanks
    Jay

    Hi Jay ,
    Try clearing your portal navigation cache , browser cache/cookies and then check .
    There is a HTTP Provider cache in visual admin also , try clearing that as well .
    Also , did you modify your themes after which this problem occured ?
    Regards
    Mayank

  • 802.1x accounting does not reflect correct port status

    Hi,
    I've just discovered an issue when trying to use MSFT supplicant and Cisco 802.1x accounting. This makes 802.1x accounting completely unusable.
    Facts:
    1. MSFT supplicant does not send EAPOL-Logoff messages and there's no way to enable this (btw. Aegis client does not send it either, except when disabling interface).
    2. I am doing machine authentication along with domain authentication.
    3. Windows XP SP2 is used with EAP registry hacks applied.
    4. PEAP/MS-CHAPv2 method is used.
    Now when the computer is started it is logged into 802.1x with 'host/machine' account and RADIUS accounting start is sent by the switch. That's fine.
    When a user logs on with its 'domain\user' identity, then EAPOL-Start is sent from the host triggering new EAP message exchange and the user is authenticated correctly. However the switch sends Interim Accounting still using 'host/machine' credentials which is obviously wrong.
    Even more bizarre accounting happens when the user subsequently logs off from the machine. The EAPOL-Start is sent from the host triggering new authentication process for 'host/machine' identity and the host is authenticated ok. The accounting being sent is:
    - first Accounting Stop for 'host/machine' User-Name
    - then strange Interim Accounting with most attributes empty or missing
    256970: Jul 10 15:56:41.211 MET-DST: RADIUS: authenticator 68 CA 1A 46 85 4F F5 95 - 87 B4 84 61 72 85 42 F3
    256971: Jul 10 15:56:41.211 MET-DST: RADIUS: Acct-Session-Id [44] 10 "013F0000"
    256972: Jul 10 15:56:41.211 MET-DST: RADIUS: Vendor, Cisco [26] 34
    256973: Jul 10 15:56:41.211 MET-DST: RADIUS: Cisco AVpair [1] 28 "connect-progress=Auth Open"
    256974: Jul 10 15:56:41.211 MET-DST: RADIUS: Acct-Session-Time [46] 6 0
    256975: Jul 10 15:56:41.211 MET-DST: RADIUS: Acct-Input-Octets [42] 6 0
    256976: Jul 10 15:56:41.211 MET-DST: RADIUS: Acct-Output-Octets [43] 6 0
    256977: Jul 10 15:56:41.211 MET-DST: RADIUS: Acct-Input-Packets [47] 6 0
    256978: Jul 10 15:56:41.211 MET-DST: RADIUS: Acct-Output-Packets [48] 6 0
    256979: Jul 10 15:56:41.211 MET-DST: RADIUS: Acct-Authentic [45] 6 RADIUS [1]
    256980: Jul 10 15:56:41.211 MET-DST: RADIUS: Acct-Status-Type [40] 6 Watchdog [3]
    256981: Jul 10 15:56:41.211 MET-DST: RADIUS: Vendor, Cisco [26] 24
    256982: Jul 10 15:56:41.211 MET-DST: RADIUS: cisco-nas-port [2] 18 "FastEthernet0/11"
    256983: Jul 10 15:56:41.211 MET-DST: RADIUS: NAS-Port [5] 6 50011
    256984: Jul 10 15:56:41.211 MET-DST: RADIUS: NAS-Port-Type [61] 6 Eth [15]
    256985: Jul 10 15:56:41.211 MET-DST: RADIUS: Class [25] 27
    256986: Jul 10 15:56:41.215 MET-DST: RADIUS: 43 41 43 53 3A 30 2F 32 39 32 66 2F 61 38 31 38 [CACS:0/292f/a818]
    256987: Jul 10 15:56:41.215 MET-DST: RADIUS: 30 32 38 2F 35 30 30 31 31 [028/50011]
    256988: Jul 10 15:56:41.215 MET-DST: RADIUS: Service-Type [6] 6 Framed [2]
    256989: Jul 10 15:56:41.215 MET-DST: RADIUS: NAS-IP-Address [4] 6 10.129.128.40
    256990: Jul 10 15:56:41.215 MET-DST: RADIUS: Acct-Delay-Time [41] 6 0
    256991: Jul 10 15:56:41.239 MET-DST: RADIUS: Received from id 1646/238 10.129.128.38:1813, Accounting-response, len 20
    256992: Jul 10 15:56:41.239 MET-DST: RADIUS: authenticator ED 8E 8B 15 28 5F E4 37 - BF A8 F5 9E 10 43 5E A8
    So that the accounting sent from the switch does not reflect current status of the authenticated user on a given port.
    How to deal with this issue? Any ideas?
    thanks,
    robert

    Does your radius proxy-table is populated wrong for EAP- SIM users ?

  • Business area does not reflecting in IT 0001

    Dear Expert,
    I have assign cost center to organization unit, then hire employee through PA40, so position assign into IT0001,
    system pick up the cost center but does not reflecting the business area in infotype 0001.
    i checked with FI consultant, there is proper intergation between cost center and business area.
    Please tell me, how to resolved this issue.
    Many Many Thanks
    Urvashi 

    Hi Urvashi,
    You will get the  Default values for Company code, Personal area, Personal Sub Area and Business Area  because of Account assignment infotype - IT1008 - for your position or Org Unit
    check from PO10 or PO13 and infotype 1008.
    You will have PA value defaulted on IT 0000 screen and others defaulted on IT 0001 screen.
    You can change these values on respective screens. A warning will be issued but you can overwrite them.
    Regards,
    HARANATH

  • Compiled CHM File Does Not Reflect New Project Name

    I have read many of the experts' responses to posts and found them extremely helpful. However, I have not seen one that addresses my issue.
    I have RH HTML Version RH8. I renamed a project via 1) File - Rename Project and 2) Single Source Layouts - Primary Layout - Properties - Output Folder and File Name.
    Two problems are: 1) The Project Folder name still reflects the old project name and 2) The CHM file still reflects the old project name.
    As a result, the output Help that the user sees still has the old project name in the title bar.
    All generated files as well as the RoboHelpHTML Project File were changed to the new project name, just as the RENAME PROJECTS Help says it should. However, the CHM file does not reflect the new project name as it says it should.
    1) Can I change the Folder name that was created when I compiled the Help file to the correct name?
    2) Can I change the FILENAME in the SELECT OUTPUT FOLDER AND FILENAME  window?
    3) Can I / should I rename the TOC and Index filenames from the old project name to the new project name? (Help says that changing the project name does not change these file names and it didn't.) 
    Will any of these actions correct the problem? I appreciate any help you can give. 

    Welcome to our community
    Try File > Project Settings.
    And if that doesn't get it, try the Project Set-up pod, windows and change the Window Caption.
    Cheers... Rick
    Helpful and Handy Links
    RoboHelp Wish Form/Bug Reporting Form
    Begin learning RoboHelp HTML 7, 8 or 9 within the day!
    Adobe Certified RoboHelp HTML Training
    SorcerStone Blog
    RoboHelp eBooks

  • Itunes does not reflect Books purchased

    I have purchased books over a year ago using my iPad 2.  I can't see in Itunes books purchased over a year ago.  When syncing Ipad to ITunes Books library does not reflect the books purchased, Why? Does anyone know?
    Thank you.
    Jaime

    Hey there Fritzme,
    It sounds like you are unable to download book purchases you made over a year ago. If you haven't already, I would check your purchased history with this article to see if you can find them there:
    iTunes Store: See your purchase history and web order numbers
    http://support.apple.com/kb/ht2727
    If you see them there but cannot find them to redownload using the iBooks app, they may have been hidden and can be unhidden using this article:
    iTunes Store: Hiding and unhiding purchases
    http://support.apple.com/kb/ht4919
    If you cannot find it there either, then per the first article you may need to contact the iTunes Store support directly:
    For help with an older purchase, contact iTunes Store support and select Purchases, Billing, and Redemption
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • HT1766 How can I have my contacts back on my phone? some of them does not appear, others are still there ? How can I have them back?

    How can I have my contacts back on my phone? some of them does not appear, others are still there ? How can I have them back?

    Welcome to the Apple Community.
    Try unchecking the tones and syncing, then re-checking them and syncing again.

  • AR Down Payment Invoice Does Not Reflect in BP Master Data...

    We have placed a sales order for a BP. 
    We select payment means and accept the payment
      In the background a AP Down Payment Invoice is created
    When we view the BP master data - the account ballance window does NOT reflect this "down payment"
    If we select the golden arrow at account ballance, uncheck "reconciled transactions" you can see the payment and AP down payment and they clear each other out.
    The problem is that when the final invoice is created it is not obvious that a down payment has been received.  Even if you are simply working at the BP master data window, it is not obvious that a down payment has been received. I belive our process is correct because If you click the TDP box, the payment is listed and will be applied to the final invoice.
    It simply does not alert the user that a payment had been received. 
    What are we doing wrong?????\
    Thank you!
    Edited by: Andrew Bleier on Feb 4, 2009 1:27 AM

    Keith Taylor
    You are right this feature is only available in Version 2007A.  There account posting happen purely due to the pay SAP has been designed and the configuration of GL Accounts.
    To make fundametal change to the core product is very difficult if you explain me your business process exactly as you do, I could think of alternatives.
    Please let know.
    Suda

  • ClickOnce: Reference in the manifest does not match the identity of the downloaded assembly Office.dll

    I have WPF application, which has the excel component reference. I have the deployment issue when i user Office 2007 installed on my server and try to access the application i get Reference in the manifest does not match the identity of the downloaded assembly Office.dll , but when office 2003 is installed there is no issue deplying.
    Below is the detail of the issue.
    PLATFORM VERSION INFO
        Windows             : 5.1.2600.131072 (Win32NT)
        Common Language Runtime     : 2.0.50727.3082
        System.Deployment.dll         : 2.0.50727.3053 (netfxsp.050727-3000)
        mscorwks.dll             : 2.0.50727.3082 (QFE.050727-3000)
        dfshim.dll             : 2.0.50727.3053 (netfxsp.050727-3000)
    SOURCES
        Deployment url            : http://<Server>/VFOLDER/pages.xbap
        Application url            : http://Server/VFOLDER/Application%20Files/pages_1_0_0_3/pages.exe.manifest
    IDENTITIES
        Deployment Identity        : pages.xbap, Version=1.0.0.3, Culture=neutral, PublicKeyToken=70c49c4ca21b317d, processorArchitecture=msil
        Application Identity        : pages.exe, Version=1.0.0.3, Culture=neutral, PublicKeyToken=70c49c4ca21b317d, processorArchitecture=msil, type=win32
    APPLICATION SUMMARY
        * Online only application.
        * Browser-hosted application.
    ERROR SUMMARY
        Below is a summary of the errors, details of these errors are listed later in the log.
        * An exception occurred while downloading the application. Following failure messages were detected:
            + Reference in the manifest does not match the identity of the downloaded assembly Office.dll.
    COMPONENT STORE TRANSACTION FAILURE SUMMARY
        No transaction error was detected.
    WARNINGS
        There were no warnings during this operation.
    OPERATION PROGRESS STATUS
        No phase information is available.
    ERROR DETAILS
        Following errors were detected during this operation.
        * [6/22/2009 5:43:31 PM] System.Deployment.Application.InvalidDeploymentException (RefDefValidation)
            - Reference in the manifest does not match the identity of the downloaded assembly Office.dll.
            - Source: System.Deployment
            - Stack trace:
                at System.Deployment.Application.DownloadManager.ProcessDownloadedFile(Object sender, DownloadEventArgs e)
                at System.Deployment.Application.FileDownloader.DownloadModifiedEventHandler.Invoke(Object sender, DownloadEventArgs e)
                at System.Deployment.Application.FileDownloader.OnModified()
                at System.Deployment.Application.SystemNetDownloader.DownloadSingleFile(DownloadQueueItem next)
                at System.Deployment.Application.SystemNetDownloader.DownloadAllFiles()
                at System.Deployment.Application.FileDownloader.Download(SubscriptionState subState)
                at System.Deployment.Application.DownloadManager.DownloadDependencies(SubscriptionState subState, AssemblyManifest deployManifest, AssemblyManifest appManifest, Uri sourceUriBase, String targetDirectory, String group, IDownloadNotification notification, DownloadOptions options)
                at System.Deployment.Application.DeploymentManager.SynchronizeCore(Boolean blocking)
                at System.Deployment.Application.DeploymentManager.SynchronizeAsyncWorker()
    COMPONENT STORE TRANSACTION DETAILS
        No transaction information is available.
    Any one has faced the problem... any help will be very grateful.
    Thanks in Advance.
    Sunil

    Thanks for the reply Robin, here is some of the observation, hope you can provide some solution from your end.
    1. When Publish my build, in the Manifest file dependentAssembly has two reference to Office.dll one with version 11.0.0.0 and another with version 7.0.3300.0.
    2. In the pages_1_0_0_4 Published folder has one office.dll with version 11.0.5530.0
    3. In the root folder of the virtual directory has one office.dll with version 7.0.9466.0
    Can you please give your thoughts, what exactly wrong with the deployment, i feel its a assembly mismatch.  where in the application files i have set the required assembly. please provide your useful solution.
    Thanks in Advance.
    Sunil

  • Output error:the name of the package "greet" does not reflect the location of this file...

    output error: The name of package 'greet' does not reflect the location of this file. Please change the package definition's name inside this file, or move the file. C:\Documents and Settings\Igal\My Documents\meiran\greet\Greeter.as
    I keep on recieving this output error although my source path is set to C:\Documents and Settings\Igal\My Documents\meiran\greet.
    any suggestions why this happens?

    The classpaths you define in your Flash software tell the compiler where to look when it needs to find a class.  According to your as file, the very top line indicates the Greeter.as file should be at a location specified by the path...
    one-of-your-classpaths\com\example\quickstart\
    So if one of your classpaths is:  C:\Documents and Settings\Igal\My Documents\meiran\greet\
    and you placed the file in the greet folder, then in your AS document you should not have the "com\example\quickstart" and your import statement in the fla should not be using that (should just be... import Greeter;)

  • An installed Theme does not get disabled or even removed from the main body of the browser, only from the header.

    After even uninstalling the all Themes and reverting to Default, the footer continues to display that one particular theme - Celestial. Concomitantly, against that dark background whenever the mouse cursor moves over a line in Gmail, the line turns White. Unreadable and irritating.
    This happened before I updated to Firefox 12 and persists when I have updated to Firefox 13 today.
    Firefox on my other desktop with the same Theme does not have this problem.
    Grateful for any guidance in getting a solution.

    Do you mean that you still see a persona at the bottom part of the browser window?
    See:
    *http://kb.mozillazine.org/Preferences_not_saved
    *https://support.mozilla.org/kb/Preferences+are+not+saved
    You can also remove the personas files (lightweighttheme-header and lightweighttheme-footer) in the Firefox Profile Folder.
    * http://kb.mozillazine.org/Themes (Lightweight theme)
    You can use this button to go to the Firefox profile folder:
    *Help > Troubleshooting Information > Profile Directory: Open Containing Folder

Maybe you are looking for