Portal Upgrade and Bi iviews not working

Dear All,
Initially the portal version was nw2004s sp 12, and it has been upgraded to nw2004s sp18.Now, the BI iviews which are under the migrated content do no work for a preview as well.
It throws the following error when I preview
The initial exception that caused the request to fail was:
Error: Internal error. No esid found.
I did have a look at a relevant note : 1166422 but not to sure how to proceed with this.
Any steps that need to be performed to help resolve this issue would be appreciated.
Regards.

Hi WD4A,
         We have faced the same problem after upgrading our SP Level to 14.You might have created those IVIEWS using a system other than the SAP LOCAL SYSTEM.At the time of creating IVIEWS in EP above SP-14 it supports only SAP LOCALSYSTEM.
Please check the SAP Note - 1140854.
Regards
Indranil
line removed by moderator
Edited by: Michael Nicholls on Feb 3, 2009 5:39 PM

Similar Messages

  • X61t upgrade and auto-rotate not working

    I just bought an x61t off trademe for $50. I've always coveted one because my old x60s was the best thinkpad I've ever owned. This one is solid and underused. I intend to upgrade to win 8 later, and add some more ram and  swap in a SSD. Just use for text input and browsing. 
    My problems are finding a user manual/guide, finding any thinkvantage legacy upgrade and, the biggest problem is auto rotate and tablet interface buttons don't seem to be working. 
    Looking on Lenovo sites hasn't been helpful in finding any of this information or solutions. It may be obsolete and unavailable. 
    can I download button drivers from anywhere? Any other solutions you can help with are appreciated. 

    Hi syrahnose,
    Here's your Hardware Maintenance Manual and here's a Service and Troubleshooting Guide .
    You could also run TVSU and see if it comes up with anything for your tablet.
    There are quite a lot of guides and manuals here .
    Regards,
    Dave
    Edit:  Windows 8 should run fine on your machine. I'm running Windows 8 on a non-tablet x61 and it runs fine.
    T430u, x301, x200T, x61T, x61, x32, x41T, x40, U160, ThinkPad Tablet 1838-22R, Z500 touch, Yoga Tab 2 Windows 8.1, Yoga Tablet 3 Pro
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    If someone helped you today, pay it forward. Help Someone Else!
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • WAP300N upgrading and restore configuration not working...

    Hi,
    We've a WAP300N accespoint and for a couple of months it works well, till last day.
    All connectivity going down, throughput of data slowed down, acces time increased.
    For example, when someone uses his/her laptop to navigate on our server, sometimes the connection resets, or the responstime to get the folder was more than 60 seconds.
    So I did reset the ap and problem was still there.
    So restored it to fabric defaults and then I another issue came there: I want to restore the original configuration file.
    So I navigate to management->restore, I select the .dat file and hit "restore", but sometime my browser shows me "page not found" then or sometimes it jumps to "time out".
    Sometimes the bar goes to 100% and the device restarts, but nothing happens.
    So then I thought, maybe there's an upgrade (our AP has firmware 1.0.00) and yes, 1.0.01.009 is released so I tried an upgrade.
    Same story, different browsers, all I get is sometimes "page not found" and sometimes "time out". 
    Firmware is still 1.0.00...
    Does anyone recognize this kind of problem and know how to solve this? 
    Resetting the AP to factory defaults and then trying to upgrade doesn't work either...
    I used Comodo dragon, google chrome and IE as browser... all browsers results in the same story..
    Hope someone could help me?
    N.B.: The AP has a fixed IP, but with DHCP enabled, it gives the same problem.
    Regards,
    John

    Hi BSAEMS. Since the firmware update was unsuccessful, this link may help you properly perform the process. Once done, I suggest that you press and hold the reset the WAP300N for another 30 seconds and try to set it up again manually without using the saved backup file. To further isolate this matter as well, you may try using a different computer.

  • WRT54GS v2.1 Firmware upgraded and wireless will not work

    Hi Everyone,
    I have a WRT54GS v2.1 wireless g broadband router. I updated the firmware WRT54GSv3_4.71.4.001_fw.bin since that was what the linksys website said i needed. After updating the firmware on the router, my two laptops can see the router but are not able to connect to it. If I connect through the ethernet cord, then I can get online and access the admin page of the router. I have no clue if a setting got messed up or the firmware caused it to go nuts. Please let me know if someone knows anything. 
    Thanks
    Delta

    After you upgrade the firmware you are to reset the router by pressing the reset switch in back for 30 seconds.  When done, power cycle the router.  Now you must reconfigure the routers wireless settings as they are all gone.  Make sure the security settings on the router match your wireless settings.
    Go here for help.

  • Upgraded and Q10 does not work

    I just upgraded my Q10. When prompted to restart the phone, I hit yes.  Took about 1/2 hour to access the screen but i had no functioning Hub nor did the phone work.  The two strengths of the BB. I took the battery out as the phone was getting hot! Now I only have the purple BB logo.  Help!

        Help is here Joyness! Let's get to the bottom of your equipment concerns. I verified this is not a known issue after updating your device. Is there any physical or water damage to your phone? Have you tried removing the battery then reinserting it back to the phone?
    Thank You,
    MichelleL_VZW
    VZW Support
    Follow us on Twitter @VZWSUPPORT

  • Windows 10 upgrade and now wifi not working

    I've upgraded to Windows 10 now my Wifi wont work. I've updated the Wifi driver and still no luck, keep getting an error saying Can't connect to this network. My laptop is a HP Pavilion 15-p261na 15.6" Laptop  

    Sorry I have the same problem, but i don't get the solution "ignore rebooted router"? I don't understand that, could you explain a little bit please?

  • I am on windows 7 and I upgraded to 10.0.2 and now it will not open. I have removed firefox completely and uploaded it again and that did not work. So my latest attempt I removed firefox 10 again and uploaded the beta version and once again nothing.

    I am on windows 7 and I upgraded to the newest verison of firefox and now it will not open. I have removed firefox completely and uploaded it again and that did not work. I then made sure it could get through my firewall and that did not work. So my latest attempt I removed firefox 10 again and uploaded the beta version hoping that would do it and once again nothing. It will not open at all. Please help - is there a live chat or a number to talk to someone at Firefox?

    I think when uninstalling you may also have to choose (tick) to delete the preferences and other personal data like the bookmarks, stored passwords etc. to erase completely. If you are installing afresh, please try right-clicking on the file and '''Run as administrator''' to install. And when uninstalling, please also make sure choose to delete all data and also manually delete any '''Mozilla''', '''Mozilla Firefox''' or '''Firefox''' from %appdata%, %localappdata% and %programfiles%. You can open a location by typing for eg. %appdata% in the '''Run''' box (Windows key + R). You may also have to check the '''VirtualStore''' folder in %localappdata%. Files in the VirtualStore can be problematic. I think a clean installation may help.
    [https://www.mozilla.org/en-US/firefox/new/ Firefox]
    [http://kb.mozillazine.org/Installation_directory Installation Folder]
    [http://kb.mozillazine.org/Profile_folder Profile Folder]
    Please note that using system restore would usually damage the Firefox installation.

  • Office 2010 MUI in Finnish and Save and Send function not working after upgrading to Lync 2013 MUI

    Problem is as follows. Used to have Office 2010, Outlook 2010 and Lync 2010, everything was working. People used it in Finnish and seemly quite a many of them used the Talleta ja lähetä (Save and Send in Finnish) in Office products.
    After upgrading Lync to 2013 version, with Finnish language pack installed with it, the Save and send does not work in Office 2010 if it is used with Finnish as display language. When you try to use it you get a Mapi error and reason is undefined or something,
    hard to say what it is exactly in english as the error message is in finnish. On those machines if the display language is changed back to english the Save and send works as it should.
    Any ideas? 

    The problem was caused by the Language Packs for Lync 2013 or Office 2013. Without them all works.
    And if you want to just unisntall the 2013 lang packs, then you also need to repair install the office 2010 ones to make it work again.

  • Ive just upgraded my late 2009 macbook, and things are not working properly. First of all, when I started the computer first time after installing Mountain Lion, some message advised me that some files were impossible to install.

    Ive just upgraded my late 2009 macbook, and things are not working properly. First of all, when I started the computer first time after installing Mountain Lion, some message advised me that some files were impossible to install. Once I wrote my password, and for now on, everytime I start the session, another window advise me that "Java SE 6" is missing, due that, the computer can't run some "CS5Service Manager". If I try to install it, the download ends with an error. If finally, you skip the istallation, you arrive to the dock, but the menu bar at the top of the screen doesn't show up.
    In addition, my trackpad doesn't works either. I can move the arrow but i can't click anywhere, probably because the option of clicking by touching is disabeled and I can't performance a regular click.
    I'll be very glad if someone know what the heck is happening with my computer. Anyway, I'm going to the genius bar next Saturday. Thx!

    We're sorry.
    We can't find the article you're looking for.
    Please return to the Apple Support homepage.
    Sigh.

  • HT4972 2nd generation ipod touch is pretty much no good anymore?  It is not able to upgrade to iOS5.1 and so will not work with many of the Apps now available in the App store.  Is there any way to find out which apps will work with 2nd generat

    2nd generation ipod touch is pretty much no good anymore?  It is not able to upgrade to iOS5.1 and so will not work with many Apps in the iTunes store?  Is there a way to find out if the App will work before you download?

    Look to the app developer to provide that information when browsing the iTunes Store.
    The iPod Touch still works, so what's your problem with it? It still works with older apps, it still does what it's intended to do.
    If you aren't happy then sell it and buy a new one.

  • Dear all,  After Software Upgrade too iOS 6 , Face Time and iMessage is Not working anymore. E Mail is working. Any Ideal what to do. Kind Regatta from Hamburg Germany

    Dear all,  After Software Upgrade too iOS 6 , Face Time and iMessage is Not working anymore. E Mail is working. Any Ideal what to do. Kind Regards from Hamburg Germany

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
     Cheers, Tom

  • Apple Mail Search and Spotlight do not work for locating email messages after upgrading to Lion 10.8.3.

    Apple Mail Search and Spotlight do not work for locating email messages after upgrading to Lion 10.8.3 on my 27" iMac.
    When searching in Apple Mail, sometimes a get a few results (with many missing), and sometimes no results at all.
    I had absolutely no problems before with Snow Loepard.
    I have reindexed mail and my startup drive. I have followed discussions regarding this matter and tried everything - a waste of time.
    This is VERY serious for me - I have many thousands of messages that I archive and need to reference for work and clients, and now I cannot find them.

    I found out that I needed a $100 mini displayport to dual-link dvi adapter to make my $30" cinema display work with my macbook pro
    http://store.apple.com/us/product/MB571Z/A/mini-displayport-to-dual-link-dvi-ada pter?fnode=51
    When I found out that solved the problem, I took it back because that was too expensive for a stupid adapter, and it still didn't work perfectly.

  • After upgrading my Macbook to Yosemite, the volume icon at the top right is greyed out and sound does not work.

    After upgrading my Macbook to Yosemite, the volume icon at the top right is greyed out and sound does not work.

    Interesting bug. I'm cautiously optimistic this will get rid of the weekly annoyance. The difference is that I bought my laptop back in Feb 2015, so it came with Yosemite. I think the issue may have appeared soon after an OS update not long after I got the thing, though. I was using a sudo command in the Terminal, but that is obviously not a fix.
    I wonder if there is a broken .plist file that may be fixed ...?

  • I ve just upgraded from the 4s to 5s and my iMessage and FaceTime will not work or log in any suggestions

    I ve just upgraded from the 4s to 5s and my iMessage and FaceTime will not work or log in any suggestions

    Hello there, Bromers87.
    It seems that you're having issues with activation of both of these features on your new iPhone 5s. The following Knowledge Base article offers some pointers with issues activating them on your iPhone:
    iOS: Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/ts4268
    If it seems that activation has gone through ok, then the following two articles offer in-depth troubleshooting for each application:
    iOS: Troubleshooting FaceTime
    http://support.apple.com/kb/ts3367
    and
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/ts2755
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • System sleep and shut down not working after upgrade to windows 10

    HiI upgraded my OS from win 8.1 to win 10.After the upgrades the system shutdown and sleep are not working properly.It's like when I shutdown/sleep the system ,the screen shuts down but the power key keeps glowing and also the battery keeps draining.So eachtime I have to foercefully press the power button to shutdown the system. I have updated the display driver . Please someone  suggest, what to do ?

    Hi there ,  Thank you for visiting the HP Support Forums and Welcome! I read your post on the HP Support Forums and seen that you are having issues with your HP Pavilion 15-n260tx Notebook PC and the Sleep/Shut down options. It sounds like you might be having an issue with one of the features of Windows called Hybrid Shutdown that is used for the Fast Startup feature.  Here are a couple of links for you about Fast Startup, Hybrid Shutdown and How to Shut down your Notebook completely. They also have some troubleshooting steps in them.   1. Fast Startup - Turn On or Off in Windows 10.2. Shut Down Computer in Windows 10. If those do not work, I do have some more documentation for you to read and try.  1. Shut down (turn off), sleep, or hibernate your PC - This document is from Microsoft. 2. HP Notebook PCs - Managing Power Options (Windows 8)3. HP PCs - Sleep and Hibernate Issues (Windows 10, 8) Sometimes a BIOS Update will work. You can update all of your drivers by going to the HP Driver's website or by using the HP Support Assistant. On the Driver's page there is not an update for the Windows 10 Column, but there was an update that just came out under Windows 8.1 on Aug 7, 2015 that should work for your Notebook.  Another fix that may work is to Run the Troubleshooter. Please follow this link to run the Windows Update Troubleshooter.   I hope this helps!  Have a great day!

Maybe you are looking for

  • OIM 9.1.0 install connector for "Oracle Database 10g"

    Hello, Is anybody here who succeeded to install the connector for Oracle Database 10g into OIM 9.1.0? If yes please give me a hint Have a nice day!

  • Text messaging Lumia 820

    Hi, I recently used my phone with global roaming. While overseas i cracked my screen.... DOH. Got it replaced (non genuine).... But now i recieve text messages in the home page preview but they dont appear in my inbox. I send messages and other peopl

  • Cannot rearrange Bookmarks Menu items

    Ever since I switched to Lion, I cannot rearrange the sites in my Bookmark Menu. I used to be able to click and drag items to rearrange them. Now when I do that, they stay put for a moment, then revert to their original position. Consequently, I have

  • Updating Pages 09 failing due to "eligible keynote" error

    "An eligible Keynote application was not found in the location /Applications/iWork '09" is the error I'm getting. Before you suggest the following: a.) make sure I have a folder in my applications folder called iWork '09 b.) that it's named exactly t

  • Should i use compression with btrfs, an ssd, and a 1.6 atom processor?

    My netbook has a 60gb ssd with btrfs, is it a good idea to enable compression? My main goal for this net-book is battery life. If i do enable compression only new files are compressed, is there a way to walk over old files and compress them? My curre