Portal using Webdynpro for ABAP

Hi Gurus!
    I am using one portal using 'Webdynpro For ABAP'. It contains Contextual Panel as well as ViewUIContainer. Contextual Panel contains all the reqd options available for user; while ViewUIContainer contains diff views as requested.
   Now, I'm trying to make a copy of that Webdynpro with some other name. What happens is --
Application is not there and when I try to make one - it says
"Interface View Does Not Exists."
Further, when I try to make an Interface View with the new name - it says
"Interface View Does Not Exists."
   Therefore, what I could conclude about the case is -- may be Interface View is default to certain Webdynpro components/interface. Hence, my question is how can I make use of same webdynpro application with some other name. This requirement arises due to the fact that we have to add some more functionalities to that and I dont want to play with the efforts made so far.
Kumar Saurav.

Issue Resolved.
Kumar Saurav.

Similar Messages

Do we need to be in unicode to use webdynpro for abap in ECC6 ?

Hello,
we study migration to SAPR3 46C SR2 to ECC6.
a question is: Do we need to be in unicode to use webdynpro for abap in ECC6 ?
Our SAPR3 are in non unicode
thanks

The problem, if you backend system is not unicode, can be, that user with the browser accessing the Webdynpro page, can enter data of any codepage (because browser is Unicode), the data will then be stored with a wrong codepage in the system and will be destroyed.
Additionally all successor versions of ERP will be Unicode only.
And on top of that, if you plan to use Java components (such as a portal), the backend must be Unicode (see Note 975768 - Deprecation of Java features with non-Unicode Backend).
Markus

How to create interactive forms using Webdynpro for ABAP

Hi All,
I have worked on Webdynpro for ABAP, and now I want to start creating adobe interactive forms using Webdynpro for ABAP. Please provide me with basic examples to start.
Also Please provide me introduction as how interactive forms are related to ISR senarios.
Thanks in Advance.
Phani

Hi Varun!,
Can you please send me also the above said step by step tutorial on [email protected]
and can you please also guide me any configurations to be done on Sneak Preview SP12 before developing the interactive forms.
Thank you in advance.
regards
Ravi

Simple application using WebDynpro for ABAP

Hi All,
I want to Build a simple application using WebDynpro for ABAP..
Thank you,
Karan

Hi Mr.Karan,
Pls Go through the link [Application|http://****************/Tutorials/WebDynproABAP/SimpleApplication/SimpleApp1.htm]..
Let me know if need any help...
Thank you,
Srini.S

Insert,update and delete data in a table using webdynpro for abap

Dear All,
I have a requirement to create a table allowing the user to add rows in it and update a row as well as delete a row from that table.To do this I guess I have to make use of ALV.But using ALV I am not able to enter data to a table where as I can make a column editable delete a row etc. please guide me to perform these operations(insert,update and delete) on table.
Thanks,
Reddy.

Hi Sridhar,
By using ALV you can do all insert delete etc things. if you want to edit i mean you can yenter data in ALV.
Check this...
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3133474a-0801-0010-d692-81827814a5a1
Editing alv in web dynpro
editing rows in alv reports
Re: editing rows and columns in alv reports in webdynpro abap
Cheers,
Kris.

Settings Portal eventing - WebDynpro for Abap iView communication

To connect two WD4A's using portal eventing; what work is to be done inside the portal environment.
All manuals on SDN provide information action to be done within WD4A, Do we need to configure/set values in the Portal environment at al...

Hi Marco,
Check the url:
[help.sap.com - Client-Side Eventing|http://help.sap.com/saphelp_nw70/helpdata/EN/ce/3e98408d953154e10000000a1550b0/frameset.htm]
Best regards,
G. Leurs

Dropdown in table element using webDynpro for ABAP

Hi All,
My requirement is:
i have a dropdown in table ui element . before i do a bind_table with context , my dropdown should be loaded.
how to do this ??
pls help me with sample code.
thanks,
Hema.

Hi Hema Sundar,
You just need to create an Attribute in your context node and bind it to the
SelectedKey property of the dropdown.
Populate the value of the attribute when you are fetching data to fill in
your internal table.
Also If you want to populate data into the dropdown on your own
you can refer to the below code
data:
    lr_node type ref to if_wd_context_node,
    lr_node_info type ref to if_wd_context_node_info,
    lt_nv type wdr_context_attr_value_list,
    ls_nv type wdr_context_attr_value.
lr_node = wd_context->get_child_node( if_componentcontroller=>wdctx_element ).
lr_node_info = lr_node->get_node_info( ).
build lt_nv ...
lr_node_info->set_attribute_value_set(
      name = 'ATTRIBUTE'
      value_set = lt_nv ).
Hope this helps.
Regards,
Ismail.

Offline Interactive PDF Forms Using EMail with WebDynpro for ABAP

These is a tutorial on implementing Offline Interactive PDF Forms using Email to both send out and receive the form back using WebDynpro for Java.
Is it possible to implement the same using WebDynpro for ABAP, specifically receiving the forms via email server.
Regards,
Mark

Hi Mark,
Check this out :
https://www.sdn.sap.com/irj/sdn/interactiveforms-elearning
Go to section :
Send, Receive, and Process Interactive Forms via Email in SAP NetWeaver Application Server ABAP (RIG session 4A)
and for the ABAP WebDynpro :
SAP Interactive Forms by Adobe in Web Dynpro for ABAP (Session 3A) .
I managed to make it work in my internal sytem.
Goodluck.
Cheers,
Danny

Webdynpro for abap and single sign on

I have developed application using webdynpro for abap and it is working fine. The problem is we can not get sso working . i.e. even though we configure SSO but still getting the screen asking to login into
sap web application server again
This is the 1st wda we have developed and not sure whether we can apply SSO with wda as it is find with webdynpro for Java. The basis team has gone thru all the configurations and could not understand why it did not work.
Thank you in advance.

Thank you for your quick response.
1. Is the portal certificate added to Backend ? - yes
2. Is the Backend and Portal in Same Domain ? - yes
3. Are you accessing the Portal using FQDN ? - No, we use web dispatcher to redirect. But the same result if we access Portal using FQDN.

Webdynpro for ABAP call non-SAP webservice

Hi,
We have a WAS 7.0 ABAP only, Can we use webdynpro for ABAP to call a Notes's webservice or Weblogic's webservice.
Where can I get the document link?
Edited by: Jeff Lien on Jan 8, 2008 10:47 AM
Edited by: Jeff Lien on Jan 8, 2008 10:49 AM

Hi this will help u.
Web Dynpro ABAP
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/db22242d-0701-0010-28a2-aeaa1fefd706
Hope that the following also helps you.
Web Dynpro for ABAP (WD4A, WDA) is the SAP standard UI technology for developing Web
applications in the ABAP environment. It consists of a runtime environment and a graphical
development environment with special Web Dynpro tools that are integrated in the ABAP
Workbench (SE80).
Web Dynpro offers the following advantages for application developers:
The use of declarative and graphical tools significantly reduces the implementation
effort
Web Dynpro supports a structured design process
Strict separation between layout and business data
Reuse and better maintainability by using components
The layout and navigation is easily changed using the Web Dynpro tools
Stateful applications are supported that is, if the page is changed and the required
data remains intact so that you can access it at any time throughout the entire
application context.
Note that stateless applications are not possible.
Automatic data transport using data binding
Automatic input check
Automatic operation of the Web Dynpro application using the keyboard
User interface accessibility is supported
Full integration in the reliable ABAP development environment
Web Dynpro Architecture
Definition
Web Dynpro is the SAP NetWeaver programming model for user interfaces (UIs).
The Web Dynpro model is based on the Model View Controller paradigm, and has the
following features that build on the classic dynpro model:
Clear separation of business logic and display logic
Uniform metamodel for all types of user interfaces
Execution on a number of client platforms.
Extensive platform independence of interfaces
Structure
Metamodel Concept
Web Dynpro provides support for developing Web representation of a business application.
You use specific tools to describe the properties of a Web Dynpro application in the form of
Web Dynpro metadata. The necessary source code is then generated automatically and
executed at runtime. In addition to the events offered by the framework, you can also define
your own events for a Web Dynpro application. However, the event handling must always be
programmed in separate source code areas which are executed automatically when the event
is triggered at runtime.
In Web Dynpro, each user interface is always made up of the same basic elements. These
elements of the metamodel can be statically declared using Web Dynpro tools.
It is also possible to implement elements of the metamodel at runtime and to change them or
reintegrate them at runtime. Using these implementations, you can make any changes or
enhancements to a user interface that has been created by declarative methods by
generating new interface structures at runtime.
This means that you can combine declarative processes and the implementation of source
code.
Graphical Development Tools
To support this declarative concept, both the SAP NetWeaver Developer Studio and the
ABAP Workbench contain a range of Web Dynpro tools. You can therefore generate a large
proportion of a Web Dynpro application using the tools provided, without having to create your
own source code. This applies to the following parts of the application:
Data flow between the front end and back end
Layout of the user interface
Properties of user interface elements
The Web Dynpro tools enable you to create source text areas manually within generated
source texts. These areas are not changed if the source code is regenerated.
Separation of Business and Application Logic
Using Web Dynpro enables a clear separation of business logic and display logic. A Web
Dynpro application runs on the front end and has local or remote access to the back end
system via a service. This means that the display logic is contained in the Web Dynpro
application, while the business logic and the persistence of the business objects run in the
back end system. The following options are currently available for connecting Web Dynpro
applications and the back-end system:
An interface generated using adaptive RFC, through which BAPIs of an SAP system
can be called
An interface for calling Web services
A self-generated interface
The source code required for connecting the Web Dynpro application can be generated
from a UML definition of the Web Dynpro interface. A UML definition can be imported
into the Web Dynpro tools as an XML file.
Conversion of the Model-View-Controller
Conversion of the Model-View-Controller Programming Model
Every Web Dynpro application is structured according to the Model View Controller
programming model:
The model forms the interface to the back end system and thus enables the
Web Dynpro application access to data.
The view is responsible for the representation of the data in the browser.
The controller lies between the view and the model. The controller formats
the model data to be displayed in the view, processes the user entries made by the
user, and returns them to the model.
/people/thomas.jung/blog/2006/06/20/web-dynpro-abap-demonstration-videos
http://help.sap.com/saphelp_nw04s/helpdata/en/77/3545415ea6f523e10000000a155106/frameset.htm
with regards,
Hema.
pls give points if helpful.

Webdynpro for ABAP - interactive Adobe form - drop down lists not working

Hi all,
I'm trying to create an interactive form for a client using webdynpro for ABAP and I've viewed the demo "Create SAP Interactive Forms by Adobe with Web Dynpro for ABAP" by Thomas Jung, but when I implement it the form following similar steps the form is not interactive.
In the properties of the "InterativeForm", I've tried clicking the "enabled" flag both on and off. I've also tried setting the "displayType" property to both "ActiveX" and "Native". But none of this worked.
I though my problem might be with Adobe reader so I switched from 8.0 back to 7.0 but this didn't make any difference either.
The system we are using is NW04s WAS 700. Any hints would be greatly appreciated!
Thanks,
-tom

Thanks for the suggestion Dezso. I've downloaded a newer version of ACF as indicated by the OSS note and installed it. I'm still having the same issue.
My basic question is what options should I be using in the form and on the InteractiveForm component? It looks like because of the evolution of the product there are multiple options available. I recall reading somewhere that as of a certain SP level we should have ZCI (zero client install) available. The would be our preference. It will be a support nightmare if each user needed a manual download of ACF.exe installed.
Should I click the "enabled" flag on the InteractiveForm object? When I create the form should I use the "Native" drop down list or the one from the "Active X" tab? I would like to use the "List Box" control on the form as well but it is only available in the "Standard" tab. So does that mean I can't get the selections from a "List Box"?
Thanks,-tom

E-mails with Interactive Forms by WebDynpro for ABAP

Hello,
I plan to use WebDynpro for ABAP and Adobe Interactive Forms.
I want to send e-mails with PDF files which are created by Interactive Forms.
Please let me know
- How to send e-mails by WebDynpro for ABAP
- How to attach PDF files.
Best regards,
Koji

Thanks,
I checked WDR_TEST_MAILT, but I want to know is
how to send e-mails using ABAP method because
in my case addresses and some data are stored add-on tables, and extract them on e-mails.
Regards,
Koji

Accessing knowledge management documents using webdynpro for java

Dear all,
iam having some documnets in KNLOWLEDGE MANAGEMENT documents folder in portal using webdynpro for java clicking on a link means perner(employee no) i should get that perpicular employee number documents.
examples documents are stored like this in knowledege management folder 20016319.pdf , 20016397.pdf , 20016398.
how to access those employee using webdynpro for java for perticular employee number if i want 20016319
Send me the code for above requirement and where i have to wrirte that code exactly
Regards

Dear Kishore,
To get the Employee ID you have to create a Adaptive RFC Model (call BAPI) which will return you the employee pernr, for this
1. Create a model using : BAPI_EMPLOYEE_GETDATA
2. Get User ID using the code
public java.lang.String getUserID( )
    //@@begin getUserID()
     String userID = new String();
          try
                // getting Logged in userid
               IWDClientUser myUser = WDClientUser.getCurrentUser();
               userID = myUser.toString().substring(19).trim();
               StringTokenizer filterdUID = new StringTokenizer(userID,")");
               userID = filterdUID.nextToken();
          catch (WDUMException e)
               e.printStackTrace();
               return userID;
    //@@end
3. Execute the BAPI
public java.lang.String getEmployeeID( java.lang.String userID )
    //@@begin getEmployeeID()
     String employeeID = new String();
          Bapi_Employee_Getdata_Input employeeData = new Bapi_Employee_Getdata_Input();
          Bapi_Employee_Getdata_Output outData = new Bapi_Employee_Getdata_Output();
          Bapip0105B comm = new Bapip0105B();
          com.sap.aii.proxy.framework.core.AbstractList list = new Bapip0105B.Bapip0105B_List();
          list.add(comm);
          employeeData.setUserid(userID);
          Calendar cal = Calendar.getInstance(Locale.UK);
          Date date = new Date(cal.getTimeInMillis());
          employeeData.setDate(date);
          employeeData.setAuthority_Check("");
          employeeData.setCommunication(list);
          outData.addCommunication(comm);
          wdContext.nodeBapi_Employee_Getdata_Input().bind(employeeData);
          wdContext.nodeOutput_BAPI().bind(outData);
        try
               wdContext.nodeBapi_Employee_Getdata_Input().currentBapi_Employee_Getdata_InputElement().modelObject().execute();
               wdContext.nodeOutput_BAPI().invalidate();
        catch (WDDynamicRFCExecuteException e) {printMsg("Failed to Obtain Employee Data");
             e.printStackTrace();
        employeeID = wdContext.nodeBapi_Employee_Getdata_Input().nodeOutput_BAPI().nodeOrg_Assignment().currentOrg_AssignmentElement().getPerno();
        return employeeID;
    //@@end
Hope it Helps!!
Warm Regards
Upendra Agrawal

Follow-up webdynpro for abap using portal theme nw2004s, sp12

Hello,
I wanted to get a follow up to this thread,
Re: webdynpro for abap using portal theme nw2004s, sp12
We are having a problem with the way reports developed in Web Dynpro for ABAP displayed in the portal (the pop-ups and dropdowns look out of wack). The issue appears when we wrap the reports into portal themes (either standard or custom). As per the thread (the link for which I posted above), the suggestion was to apply WDFORCEEXTERNALSTYLESHEET parameter to the WDP, however our system doesn't have this parameter in the system, but it seems like I can create my own parameter. Can some on give me all of the properties assigned to WDFORCEEXTERNALSTYLESHEET in table WDY_APP_PROP_DEF.
Thank you

Hi Brad, I was trying to apply the note 1033496 but our ABAP servers does not have the WDFORCEEXTERNALSTYLESHEET parameter available in WDY_APP_PROP_DEF table. All other notes are not applicable to our issue.
The portal is NW2004s SP12, the ABAP server is NW2004 SP11
Regards.
Message was edited by:
Aleks Ozerov

Webdynpro for ABAP and Portal Integration

Hi Experts,
we created a WebDynpro for ABAP application for portal. The application will modify/update few fields in backend sap HR table PA0006 (infotype 6) . The end user (portal user) should be able to update his data in backend with the iview created on this application.
I have below two questions in my mind.
1. Do we need portal eventing for this? It's a single iview in portal which will fetch and update his data through this WebDynpro for ABAP application.
2. It is for 10 countries of almost 1000 users (with same userid in portal and backend). How can I make sure that the enduser updates and fetch his records only. The SSO is already set up between Portal and Sap ECC system. Do I need to again pass the enduser portal id to the sap in coding to fetch and update the data or sso will take care of itself.
Thanks
Ajay

1. Do we need portal eventing for this? It's a single iview in portal which will fetch and update his data through this WebDynpro for ABAP application.
Answer: If you use, for exemple ITS to access this Webdympro, you will not need any action on portal for sure. Actually you will just need actions on portal, if you want to make some customization on portal side. If you want just show the Webdympro how it is, your action are all on backend..
2. It is for 10 countries of almost 1000 users (with same userid in portal and backend). How can I make sure that the enduser updates and fetch his records only. The SSO is already set up between Portal and Sap ECC system. Do I need to again pass the enduser portal id to the sap in coding to fetch and update the data or sso will take care of itself.
If you access via ITS, te custome will acess the backend with the user you have set on the SSO or user-mapping. The portal there is nothing to do in this regards, you must just take care of this on backend.
Please evaluating the answer you are contributing for the SDN keep growing.
Edited by: Fabio Sarmento on Sep 19, 2011 2:41 PM

Portal using Webdynpro for ABAP

Similar Messages

Maybe you are looking for