Portal UWL Slow Loading

Hi All,
I'm experiencing a long wait time to load the UWL in my portal (longer than usual). It shows the Loading icon and does not show any workflow items. It took a long time to load the items and sometimes it never does. (shows loading icon for a long period of time)
The following has been performed but with no results.
1. Service Reset and Reboot
2. Checked and confirmed that Network connectivity is not the root cause
Product Version: SAP NETWEAVER 7.0 (2004S)
Could there be any alternatives that I could look into?
Appreciate your advice.

Hi Bryan,
Is it only the UWL that you believe is slowing down or the portal on the whole?
However, you can have a look at these links for enhancing the performance.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d164c5ee-0901-0010-4fbf-d0856b5c8a84
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b601a14c-0601-0010-909c-ddc7ae0a1071
Points are welcome if handy!
Regards,
Sandeep Tudumu

Similar Messages

  • I just updated my RAM and I keep getting a crash report. I have a 21.5 Inch mid 2010 imac. I also am experiencing slow load times and when I try to open Final Cut it says that quartz extreme is not compatible and that I have no VRAM even though I do.

    I just updated my RAM (replaced the two 2 gig cards with two Corsair 8 gig cards) and I keep getting a crash report. I have a 21.5 Inch mid 2010 imac. I also am experiencing slow load times with Photoshop and when I try to open Final Cut it says that quartz extreme is not compatible and that I have no VRAM even though I do.
    Here is the crash report:
    Interval Since Last Panic Report:  5426204 sec
    Panics Since Last Report:          2
    Anonymous UUID:                    2DD57DDB-BB42-5614-395A-CA6225BDAFD9
    Wed Mar 20 11:36:53 2013
    panic(cpu 0 caller 0xffffff801aa43d8e): "a freed zone element has been modified in zone: maps"@/SourceCache/xnu/xnu-2050.18.24/osfmk/kern/zalloc.c:219
    Backtrace (CPU 0), Frame : Return Address
    0xffffff81eb0eb950 : 0xffffff801aa1d626
    0xffffff81eb0eb9c0 : 0xffffff801aa43d8e
    0xffffff81eb0eba00 : 0xffffff801aa435d2
    0xffffff81eb0ebae0 : 0xffffff801aa663f7
    0xffffff81eb0ebb20 : 0xffffff801aa67398
    0xffffff81eb0ebc70 : 0xffffff801aa6887c
    0xffffff81eb0ebd20 : 0xffffff801ad5b8fe
    0xffffff81eb0ebf50 : 0xffffff801ade182a
    0xffffff81eb0ebfb0 : 0xffffff801aaced33
    BSD process name corresponding to current thread: launchd
    Mac OS version:
    Not yet set
    Kernel version:
    Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
    Kernel UUID: 69A5853F-375A-3EF4-9247-478FD0247333
    Kernel slide:     0x000000001a800000
    Kernel text base: 0xffffff801aa00000
    System model name: iMac11,2 (Mac-F2238AC8)
    System uptime in nanoseconds: 1070542822
    last loaded kext at 707348380: com.apple.driver.AppleIRController    320.15 (addr 0xffffff7f9c53e000, size 28672)
    loaded kexts:
    at.obdev.nke.LittleSnitch    3908
    com.apple.driver.AppleIRController    320.15
    com.apple.driver.AppleUSBCardReader    3.1.0
    com.apple.driver.AppleFileSystemDriver    3.0.1
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
    com.apple.BootCache    34
    com.apple.iokit.SCSITaskUserClient    3.5.1
    com.apple.driver.XsanFilter    404
    com.apple.iokit.IOAHCIBlockStorage    2.2.2
    com.apple.driver.AppleUSBHub    5.2.5
    com.apple.driver.AppleFWOHCI    4.9.6
    com.apple.driver.AirPort.Atheros40    600.70.23
    com.apple.driver.AppleUSBEHCI    5.4.0
    com.apple.driver.AppleAHCIPort    2.4.1
    com.apple.iokit.AppleBCM5701Ethernet    3.2.5b3
    com.apple.driver.AppleUSBUHCI    5.2.5
    com.apple.driver.AppleEFINVRAM    1.6.1
    com.apple.driver.AppleACPIButtons    1.6
    com.apple.driver.AppleRTC    1.5
    com.apple.driver.AppleHPET    1.7
    com.apple.driver.AppleSMBIOS    1.9
    com.apple.driver.AppleACPIEC    1.6
    com.apple.driver.AppleAPIC    1.6
    com.apple.driver.AppleIntelCPUPowerManagementClient    196.0.0
    com.apple.nke.applicationfirewall    4.0.39
    com.apple.security.quarantine    2
    com.apple.driver.AppleIntelCPUPowerManagement    196.0.0
    com.apple.iokit.IOUSBHIDDriver    5.2.5
    com.apple.iokit.IOSCSIBlockCommandsDevice    3.5.1
    com.apple.iokit.IOUSBMassStorageClass    3.5.0
    com.apple.driver.AppleUSBMergeNub    5.2.5
    com.apple.driver.AppleUSBComposite    5.2.5
    com.apple.iokit.IOSCSIMultimediaCommandsDevice    3.5.1
    com.apple.iokit.IOBDStorageFamily    1.7
    com.apple.iokit.IODVDStorageFamily    1.7.1
    com.apple.iokit.IOCDStorageFamily    1.7.1
    com.apple.iokit.IOAHCISerialATAPI    2.5.0
    com.apple.iokit.IOSCSIArchitectureModelFamily    3.5.1
    com.apple.iokit.IOUSBUserClient    5.2.5
    com.apple.iokit.IOFireWireFamily    4.5.5
    com.apple.iokit.IO80211Family    500.15
    com.apple.iokit.IOAHCIFamily    2.2.1
    com.apple.iokit.IOEthernetAVBController    1.0.2b1
    com.apple.iokit.IONetworkingFamily    3.0
    com.apple.iokit.IOUSBFamily    5.4.0
    com.apple.driver.AppleEFIRuntime    1.6.1
    com.apple.iokit.IOHIDFamily    1.8.0
    com.apple.iokit.IOSMBusFamily    1.1
    com.apple.security.sandbox    220
    com.apple.kext.AppleMatch    1.0.0d1
    com.apple.security.TMSafetyNet    7
    com.apple.driver.DiskImages    344
    com.apple.iokit.IOStorageFamily    1.8
    com.apple.driver.AppleKeyStore    28.21
    com.apple.driver.AppleACPIPlatform    1.6
    com.apple.iokit.IOPCIFamily    2.7.2
    com.apple.iokit.IOACPIFamily    1.4
    com.apple.kec.corecrypto    1.0
    Model: iMac11,2, BootROM IM112.0057.B00, 2 processors, Intel Core i3, 3.2 GHz, 16 GB, SMC 1.64f5
    Graphics: ATI Radeon HD 5670, ATI Radeon HD 5670, PCIe, 512 MB
    Memory Module: BANK 0/DIMM1, 8 GB, DDR3, 1333 MHz, 0x029E, 0x434D5341384758334D314131333333433920
    Memory Module: BANK 1/DIMM1, 8 GB, DDR3, 1333 MHz, 0x029E, 0x434D5341384758334D314131333333433920
    AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.70.23-P2P
    Bluetooth: Version 4.0.9f33 10885, 2 service, 18 devices, 0 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: ST31000528AS, 1 TB
    Serial ATA Device: HL-DT-STDVDRW  GA32N
    USB Device: hub_device, 0x0424  (SMSC), 0x2514, 0xfd100000 / 2
    USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 4
    USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd110000 / 3
    USB Device: hub_device, 0x0424  (SMSC), 0x2514, 0xfa100000 / 2
    USB Device: BRCM2046 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0xfa110000 / 4
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0xfa111000 / 6
    USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa120000 / 3

    There have been a few reports on here where Corsair RAM seems to have caused users a lot of grief with crashes.
    The recommendation on here, mostly, is to only buy RAM from macsales.com or crucial.com as they guarantee their modules will work and offer a no quibble lifetime guarantee.
    I'd put the original RAM back in, return the Corsair chips for a refund and re-order from one of those two companies.
    http://eshop.macsales.com/shop/apple/memory/iMac
    http://www.crucial.com/

  • Slow load times on AU sites?

    is anyone still experiencing slow load times on AU sites, apparently this is resolved but I just emptied my cache and checked load times on half dozen sites. Still very slow!

    I just loaded http://www.prettypollution.com.au/ and it took 17sec.
    Got similar time for http://www.designexperts.com.au/ as well. So, although not very fast it's much better than what you’re seeing. Could be something in the node you’re being routed through.

  • Boot message: problem with hard drive detected. Slow loading of windows 7

    Good Day
    I am having a problem with my hard drive, everytime it boots these days it starts with a message: Warning: a problem with the hard drive has been detected, followed by an extremely slow loading of windows. then once in windows it gives me Anothet message
    the messsage says hard drive failure imminent you should back up you data etc.
    My specs are:
    Intel core 2 duo e8400 3.0 ghz
    4 gig ddr3 transcend
    1 tb seagate 7200.12
    giga byte nvidia 9800 gt 1 gig ddr3
    Please help lots of data.

    Another option:
    Take your hard drive out and slave it into another KNOWN WORKING PC.
    Back-up your data immediately. Slow boot usually indicates that the drive is going to die. (Check your warranty!)
    Then, run "chkdsk /r" from the host PC to check the failing drive. (It is good to match OSes if you can.)
    MCSE: 6771498

  • IMac - Slow load and wifi problems

    I have lion installed on my macbook pro and on my iMac. My macbook pro works GREAT...no problems. My iMac - I am ready to toss out a window. Here are the problems:
    INCREDIBLY slow boot up time - 5-10 minutes from off - 5-8 minutes from sleep
    The hard drive is constantly working. I can have nothing open and it sounds like the hard drive is constantly spinning
    Half the time my wifi hardware is not found on boot up and I have to reboot with slow load times - sometimes taking 20 minutes before I can get logged in to a 'working' computer
    A lot of my programs have become slow. Safari can be slow responsive but others that are not apple that have done 'lion updates'
    I have my activity monitor running and nothing seems to be hogging resources. My iMac specs are:
    2.8 intel core i5
    12 gb ram
    2 TB hard drive with about 1tb free
    I ran the lion update that came out and it did not seem to do much for me.
    Anyone have a solution? Anyone tried a clean format and did this work? Lion works great on my laptop and I just need it to work on my main computer as well.
    Reba

    i think part of the boot up time issue is the amount of windows you happen to have open when you put it to sleep
    other is lion upgrade slows it down due to this auto save function
    my wifi is also spotty and acts like it can't find itself at times
    and this is a brand new imac

  • Upgraded to FF4 sites were slow loading or not loading at all - then I discovered it downloads if I keep moving the cursor. If I stop moving the cursor the downloading stops or slows to a crawl again.

    Upgraded to FF4 sites were slow loading or not loading at all - then I discovered it downloads if I keep moving the cursor. If I stop moving the cursor the downloading stops or slows to a crawl again. What do I do so no need to keep having to move cursor?THE DOWNLOADING ICON STOPS MOVING UNLESS I KEEP MOVING THE CURSOR AROUND.

    Clear Cookies & Cache
    * https://support.mozilla.com/en-US/kb/Template:clearCookiesCache
    Clear the Network Cache
    * https://support.mozilla.com/en-US/kb/How%20to%20clear%20the%20cache#w_clear-the-cache
    Troubleshooting extensions and themes
    * https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
    Check and tell if its working.

  • How to add 1 more column in standard portal UWL and map the values.

    Hi
    I have one issue/requirement, please help me out on that also.
    In portal UWL, i want to add one more column TICKET ID COLUMN, and ticket id value I  will be putting as work item ID of abap Workflow, so whenever  approver opens his portal UWL, in first column i want to show ticket ID say 00012345, so how to add this ticket ID column in standard portal UWL and how to put/map  value of work item in that column.
    My idea behind this is, when ever say employee wants to know the status about his ticket ID, he can simply ask his manager regarding the ticket status by referring to that ticket ID which manager can easily find in his portal UWL in that extra TICKET ID COLUMN .
    Do I have to change anything in SAP inbox also ? Do i have to add 1 more colum in sap R/3 inbox also ? and will adding 1 more colum in sap inbox (R/3 inbox), will create automatically one more ticket ID colum in portal UWL also ?
    please let me know , as i do not want to add 1 extra column in R/3 inbox, just i want in portal UWL extra ticket ID column should come and i want to put workitem ID generated at the start of workflow, in that colum in portal UWL
    please help me on this.
    Thanks...
    Edited by: User Satyam on May 29, 2011 6:16 AM

    Hi Satyam,
    These are called custom attributes.  Here is a powerpoint that may be able to assist you with the documentation that the other poster gave you too.
    Always remember too when you make a change on the backend R/3 side, you must reregister your UWL connector.  And yes, the column must be available on the backend R/3 side.  We can't create on the fly columns in the UWL, that have no reference to the backend system in this case.
    Beth Maben
    EP - Senior Support Consultant II
    AGS Primary Support
    Global Support Centre Ireland
    Please see the UWL Wiki @
    https://www.sdn.sap.com/irj/scn/wiki?path=/display/bpx/uwl+faq  ***

  • Emails not comming in Portal UWL

    Hi All,
    I am facing problem in Portal UWL . some mails those are generated by FM is comming in SAP Inbox . but its not comming in Portal UWL.
    Can any body help me in this regards.
    your help will highly appreciated.
    Regards
    Rashmi

    Hi Rashmi,
    Please check..
    Have you configured the UWL with your System.
    If yes then please check.
    1. You have created the system over portal.please check if it passes all the tests.
    2. register the system with UWL.please check if the system is registered or not by checking the xml file created or not.
    3. please refresh the cache.
    Hope it will work.
    Regrads
    Narendra

  • Notifications in Portal UWL and external email Id

    When we run the workflow, the Tasks showup in the Universal worklist but the notifications don't (even though they appear in R3 Business workplace). Is this correct? DO we need to do some settings to take care of this. We also need to send the notifications to the employee's external internet email Id. But this too is not working. I have checked SCOT. everything is fine.
    Note: for the external email, I have not done any special task/setting in the workflow. The notification is being sent to an agent(position). and for the employee occupying this position I have specified the external email in infotype 105. Do I need to do any thing else?
    For my client, I need the workflow FYI notifications to go to:
    1. Their Universal worklist in the portal and
    2. their external internet email Id.
    Could anyone please guide me how to go about this?

    >
    Vikrant wrote:
    > Thanks for the response Vijay.
    >
    > Two clarifications here:
    >
    > 1. SCOT has been properly configured at my end. Test mails are going to external email Id. Have checked it. But in my workflow step -  mail notification, I have set the RECIPIENT TYPE as Organizational Object and then further set it as a particular Position in my Org structure.
    >
    > Instead I need to set the recipient type as Email address. Is It?
    > Is this what you meant by "type id as 'U' "? Or did you mean I should make use of USER instead of POSITION as the recipient type?
    You need to set up the forwarding email address in SO36 for every user and also tick the 'Also place in Inbox' box, to use in SendMail step, choose type as G and the user id with US prefix as the recipient, this will send it to both external email and UWL( to UWL only after step 2 below).
    >
    > 2. For the notifications to reach the Portal UWL (universal worklist) I need to get SONIC software installed? Is this free? Is it a plug-in? where to look for it? with SAP?
    SONIC is short for SAP Office Notification Connector, you can search for it on scn itself.

  • Substitution in portal UWL

    Hi
    I had a question around the portal UWL, and I've tried SDN, SAP Help, Google, and still can't find a definitive answer; so I'm hoping someone here can help.
    We run EP6 with an ECC5 backend, and our users are allowed to manage substitution via the portal universal worklist. One of our users (let's call them user A) has created a substitution rule for All Tasks, and set the nominee to Receive My Tasks. They have given this access to User B.
    They have then created another rule and set the same attributes (so All Tasks, and set the nominee to Receive My Tasks), but set the substitute to User C. After that, they've done the same again, but to a third substitute (User D).
    So, in total, they now have three rules but with three different substitutes. Does anyone know if this is supported? i.e. can you have multiple substitutes if you set them to receieve All Tasks?
    The reason I ask is that if I look at the table HRUS_D2 in the ECC backend for User A, only one of the subsitutes will have an "X" in substitution active. My thinking is that the rule can only be active for one of the subtitutes at any one time, so it'll switch it on for however logs in to the portal first that day - or something along those lines.
    Any thoughts?

    Thanks for the prompt reply.
    I don't have a screen shot of the rules, will need to get one sent over, but the user tells me this is how they were set up.
    The issue has been raised by one of the substitutes, as sometimes they see that the subsitution is active in the portal UWL (they see a message along the lines of "Working on tasks for User A"), and other times it's not there (even though there are tasks currently open for User A). I've run the funciton module RH_SUBSTITUTES_LIST_NEW for User A to look at the substitutions as of today, and it says:
    User A                  Substitution Profile                     Substitute Status         Assigned as of                    Assigned until
      User B                   General substitution                 Deactivated                     10.02.2010                        Unlimited
      User C                   General substitution                 Activated                        28.09.2009                        Unlimited
      User D                   General substitution                 Deactivated                     10.02.2010                        Unlimited
    It's a strange one!

  • How could i display yahoo mail in Portal UWL

    Hi,
    Can any one tell me how can i diaplay my yahoo mail in Portal UWL any connector is avilable to connect Portal to yahoo server.
    thanks in advance
    Chitta

    Hi Chittya,
    You can crate a URL iview by selecting the URL Iview template while creating a new iview. Pass the URL of your internet address in the URL Iview wizard. For more information on how to create and use URL Iviews check  <a href="http://help.sap.com/saphelp_nw70/helpdata/en/4c/eee2bedf3b4082b14a933e5ee63472/frameset.htm">this</a> helpful link.
    Regards,
    Ankit
    Reward points if helpful.

  • Slow loading on website

    I am new to Quicktime Pro, but have found it very easy to use with great quality results endoding my FC files for the web. My problem is that when a user clicks to open my video sample, the file has a very slow load time. Some specifics:
    input file: 1.8 GB file exported from FCE as uncompressed 8-bit
    output file: in QTPro - encoded with H.264, 15 fps, 100 key frame, 800 kbps, set for streaming (fast start), 640X480, deinterlacing checked. file size 8 MB.
    As I said, the quality is great (except that the deinterlacing filter doesn't seem to do anything), but the playback outpaces the load very quickly. It takes almost 2-3 minutes for the file to be ready to start automatically. I've been told that an 800 kbps file should load in a few seconds.
    Is there anything you could tell me to enhance the load time? I'm wondering if I'm missing a simple step since QT has been so easy to start to use.
    Thanks so much for your help!! Jo

    Nothing at all wrong with your QuickTime file but your html code at http://aftglow.com/ directly links to it rather than calling the quickTime browser plug-in.
    That may be the source of your troubles. You need to use special html page code for QuickTime:
    http://developer.apple.com/internet/ieembedprep.html

  • Website slow loading

    So I am having a problem with one website that I frequent. It it much slower loading than other websites I visit. The progress bar seems to freeze for several seconds. Sometimes if I hit the x then the reload symbol the page loads right away. I have asked other people, it is a forum site, if they have had problems lately and nobody has experienced the slow loading problem I have. One person suggested clearing the history which I did. That didn't work so I researched the web and found a suggestion to delete the cache from the library and also clear history. I did that as well and nothing has improved. It only happens on this one site and has only started happening in the last two maybe three weeks.
    Any suggestions on what else I could try? I do not want to use another browser to see if it works in another browser. It used to work fine but doesn't now. Just looking for other things I could try to resolve the issue.

    Start up in Recovery mode. In the OS X Utilities screen, select Get Help Online. A clean copy of Safari will launch. No plugins, such as Flash, will be available. While in Recovery, you'll have no access to your saved bookmarks or passwords, so make a note of those before you begin, if they're needed for the test.
    Test. After testing, restart as usual and post the results.

  • Slow loading website

    So I just finished my website but it loads piece by piece and
    a slower than I would have liked. is there anyway to improve this
    that would not require me redoing it all over? The site is here:
    http://www.martinpaulphotography.com/index.html
    thanks,
    Martin.

    A couple of things:
    (1) If the music is in your flash file, you can delay it a
    few frames. Too much in the first frame slows loading. You might
    consider adding a volume X button for those that want to browse w/
    sound.
    (2) Optimize the images of your page. There are a lot of them
    which is one of the reasons for the slow load.
    Is that your musical composition? If not, you should post
    your use with permission on the front page to oblige the author's
    permission. If you don't have that....lose the music. Be careful
    here, especially with professional sites.
    -Lokey

  • Do I have DNS problems? Slow loading or no access ...

    Hi all,
    Most of the time my broadband seems to play nicely however I seem to have painfully slow loading or non-loading websites with annoying regularity. It is not all sites and the problem seems rather selective.
    Sites that I know are up (such as bbc.co.uk) are sometimes impossible to load. A speed test shows somewhere between 2Mb and 7.5Mb (yeah, I know - contention in my area is a real issue).
    If I VPN out to a proxy server then everything works just fine.
    Does anyone know if this is a BT DNS issue?
    Thanks!

    Thanks for the reply.
    I changed my DNS to 8.8.8.8 but still no joy - pick a random page and some work, some don't. My smart TV is decidedly dumb and nothing will stream. Give it a few hours and it is usually fine.
    I am also randomly getting the message that "You're seeing this page becasue BT parental controls is active and you are attemtping to connect to a DNS outside of our network" which I am not...
    [sigh]

Maybe you are looking for