Portal work protect mode

Hi,
I have implemented the webdynpro workprotect mode . and i am getting the default dialog box when clicking on the links. But i am not getting the dialog box when clicking on the BROWSER CLOSE.
i have kept the portal workprotect mode as STANDARD
Is there are setting i have missed to get the popup..
Thanks,
Raju Bonagiri

Raju,
check this doc
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/8382535d-0d01-0010-dbb5-d3d41dfefd10
Go to system admin -> system config ->service config->Applicaitons ->com.sap.portal.epcf.loader
Change workprotect.mode.default to 2
Restart the config by right clicking on com.sap.portal.epcf.loader . Click Administrate ->restart
Thanks
Bala Duvvuri
Edited by: Bala Duvvuri on May 11, 2009 6:09 AM

Similar Messages

Portal Work Protect mode is not working properly after upgrade to NW 7.4

The portal Work protect mode value is set to '3' ("Choose action in popup on unsaved data")
When we edit a standard ESS java Web Dynpro application and click exit, the portal should show us the Work protect mode popup.
Instead, the portal exits to the overview page and when we try to navigate away from the overview page, it shows the work protect mode window.
This was working fine before upgrade to SAP NW 7.4 SP 5.
Please let me know if anyone have faced this issue before or have an resolution.
Thank you.

Hi Sundar & Rakesh
I've followed Sundar's request in the previous thread we worked on together to provide further assistance here:
** Scenario Summary **
The portal Work protect mode value is set to '3' ("Choose action in popup on unsaved data") When we edit a standard ESS java Web Dynpro application and click exit, the portal should show us the Work protect mode popup. Instead, the portal exits to the overview page and when we try to navigate away from the overview page, it shows the work protect mode window. This was working fine before upgrade to SAP NW 7.4 SP 5.
Ok the first point of reference and analysis here is to check and review: Workprotect mode via the following navigation path:
System Admin-> System Configuration -> Service Configuration -> Under one of the services: Work protect mode property.
Now in terms of this popup kindly ensure the configurations are setup accordingly as per the following document:
http://scn.sap.com/docs/DOC-2513
What is the setting of WDPortalWorkProtectMode.setApplicationDirty ?
Work Protect Mode
http://help.sap.com/saphelp_nw04s/helpdata/en/45/b76f4169e25858e10000000a1550b0/content.htm
Lastly have you attempted to change the property value and restarting the service ?
Restart the config by right clicking on com.sap.portal.epcf.loader. Click Administrate ->restart
Kindly update me as per your findings.
Kind Regards
Troy Cronin - Enterprise Portal Support Engineer.

Setting Work Protect Mode in Portal

Hi ,
Can anyone tell me how to set up the Work Protect Mode in for the portal general settings.
Best Regards
Sid

Hi
Click the personalize option in the masthead of the Portal default framework page. A popup opens and in the detailed navigation of the popup, the last option is work protect mode.
The four option in it are as follows:
Use default portal setting
Protect unsaved data (open page in new window)
Discard unsaved data (open page in same window)
Choose action in popup on unsaved
Save and refresh the browser for the change to take effect.
Regards,
Ganesh N

Customizing the work protect mode

Hi,
I have a problem in customizing the sap providing work protect mode. When I activate the work protect mode, a pop up is coming up and the default radio button selected is to open the unsaved data in a new window. Can you please let me know can we change the default selection by any option like
1. modifing the com.sap.portal.epcf.loader. par file
2. By any configuration. etc..
please help me .
Regards,
Rambabu

I don't think there is a configuration available to change the default selected radio button.
You will need to make the changes in the par file com.sap.portal.epcf.admin.par
u2022 Download the com.sap.portal.epcf.admin.par
u2022 Unzip the com.sap.portal.epcf.admin_core.jar and edit the WorkprotectPopup class
Thanks,
Shanti

Work Protect Mode for IAC/BSP iViews

Does anyone know how I can enable Work Protect Mode for BSP or IAC iViews in the portal?
It works correctly as per the desired mode level for WDP iViews, but when a user makes changes on a form on a BSP/IAC and navigates away from the page, no pop-up appears.
Is some JavaScript required in the BSP to set the page as "dirty" or to subscribe to the Work Protect event handler in the portal, or is there a simpler way to enable this or a similar feature?
Thanks,
Tom

Hello friends,
I have same issue.. I have applied Work Protect Mode to 3.. but it doesn't work for IAC iViews.
Is your issue resolved by any mean..
I cant apply Java script code on every back-end application...
the issue again... is this doesn't come when user directly logs in through ITS. over there user gets the alert. but only when user moves from Portal the work protect mode doesn't.
It became very urgent issue.
I appreciate any help..
Regards
pankhuri

Work Protect Mode Pop up

Hi,
I would like to get the source for the Work Protect Mode pop up that we see in the portal.
Can anyone point out where can I get the actual source code?
Regards
J

Hi Kai,
Thank you for the response...
I am not sure of the location of the text you suggested, but I found that
text is maintained in CL_FPM_CONFIRMATION_REQUEST abap class. this text is divided in to two text 1) This application contains unsaved data which may be lost. and 2) Do you want to continue without saving the changes? And append this is the class constructor.
We can change the text here... But thought changing the text is not a solution for my issue, so I need to address the root cause....
I contacted SAP (raised an OSS message) and working with them on this, as of now we modified our logic in Value Determination BADI and it is working fine 90%
Update: modified Value determination BAdi and V_T77SP_2 table entry to solve this issue!
Thanks,
Pradeep

Work Protect Mode with BSP in EP 6.0 SP14

Hi,
we need to create a BSP application that runs in a EP portal. We have many BSP pages in this application, each requiring a lot of user input.
It would be really helpful to send a reminder to the user once he leaves a page and clicks another entry in the portal menu.
We understand that the "work protect mode" does this trick in NW2004s under certain circumstances (i.e. "dirty flag").
Is there any chance to build this behaviour also in the combination of a ABAP AS 6.40 (for the BSPs)with an EP 6.0 ?
We would appreciate any help on this topic.
Regards
Marcus

Hi,
Does that drop down list change results in a reload of the page with new data on? If so, you should set the variable for confirm to exit after the reload.
If there is no reload involved, the msg shouldn't show up. If lots of pages with drop down which work like this.
Eddy
PS.
Put yourself on the SDN world map (http://sdn.idizaai.be/sdn_world/sdn_world.html) and earn 25 points.
Spread the wor(l)d!

Default setting of the Work Protect Mode property

Hi,
can we set the default work protect mode to a particular value for every user in portal.
Where we would have to make the changes in Portal.
Best Regards
Sid

Hi Sid,
You can set the default work protect mode in the epcfloader service configuration.
Go to System Administration -> System Configuration -> Service Configuration, and edit the epcfloader service configuration.
Change the workprotect.mode.default to the setting you like:
1 = Protect unsaved data by opening a new browser window (standard setting)
2 = Unsaved data is lost
3 = Required behavior can be selected each time the popup appears
If you don't want your users to be able to override this setting in personalization dialog, set workprotect.mode.personalize=off.
See also http://help.sap.com/saphelp_nw04/helpdata/en/37/50fb5066f9db43b3b5d5fc8de0c051/frameset.htm.
Best regards,
Johan

Work Protect Mode for transactional iView...

Hi Experts,
Please help me to understand significance and features of Work Protect mode in portal.
How to implement it.
But main point is, is it possible to implement Work Protect Mode in Transactional iViews, i.e. let say we have created one transactional iView for SU01 tcode, which opens in New Window.
Now if I directly close that window then ideally one popup should come telling the data is not saved.
Also let me know if there is any other way to achieve my requirement.
Appreciate for help.
Regards,
Ravi

Hi Ravi,
Thanks for your response.
Kindly suggest what vaue we should give in this property "workprotect.mode.default".
I was going through one link : [http://help.sap.com/saphelp_erp2004/helpdata/en/37/50fb5066f9db43b3b5d5fc8de0c051/content.htm]
Also are you sure this setting will enable WorkProtectMode for Transactional iView as well.
Regards,
Ravi

Enable Work-Protect-Mode in BEx-WEb

Hello,
I am using integrated planning in the SAP EP 6.
Every time someone clicks on the portal navigation all changes get lost, unless the planning app was saved before.
Is there a way in Bex Web to activate the dirty-flag and the work protected mode? This way the Portal itsself would recoginze changed data and prevent the loss of data.
regards,
Michael Kulhanek

Hello Michael,
just check the OSS 0734861.
enter value "3" for workprotect.mode.default. perhaps this will help.
best regards,
michael

Very Urgent - Implementing Work Protect Mode

Hi,
Did any Web Dynpro expert here implemented Work Protect Mode ? (WD for Java)
Promise to award points.
Thanks.
Ruthie.

Hi Ruthie,
I think that is very much possible in WD for JAVA.
Please go through the following links for more help,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a891e490-0201-0010-fb99-b7e4f5dda2ec
http://help.sap.com/saphelp_nw04/helpdata/en/88/585d420447e054e10000000a155106/frameset.htm
http://sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/2fffe990-0201-0010-aab0-e61c3250bcf3
I hope this helps you.
Best Regards,
Guru.
PS: Reward points for helpfull answers.

FPM and Work Protect Mode

Hi Gurus,
Need your help with an issue I am facing.
I need to implement Work Protection in a custom ESS appl. I read in the forum/ help that FPM itself manages WorkProtection/ Confirm Loss-of-Work for ESS applications.
However, It doesn't prompt for 'saving' data in my case. I am not able to figure out a way to incorporate it?
Any idea how to implement it? I did go through the FPMComponent in xsfpm dc. But, am not sure how to implement it in my application.
Thanks in advance.
Anjana R.

Hi Ayyapparaj, Thanks.
I am on NW04 SP 21. And Work Protect Mode works on the standard ESS applications.
I am not sure how to implement work protection in my application or how to trigger the Standard Work Protect confirmation dialog window.
I created a custom Confirmation window, but the client wants it to be consistent with the standard Work Protect Pop Up.
I did set the isDirty to true and turned on the "Prompt to save work" option on Portal. But, still doesnt work.
Could you please help me with this?
Anjana R.
Edited by: Anjana Raghav on Dec 20, 2007 7:42 AM

IAC and Work Protect Mode

Hi,
I have created a Role in Portal which is calling an IAC (bbpsc02) from SRM box. The problem is that whenever user open this transaction and if he without doing anything navigate to other role, he is getting Work Protect Mode dialog
u201CYour Current page have unsaved data. Please take following actionu2026u201C
Although the user had not done anything on this page but he is still getting this message. The transaction on screen display some text and ask the user to select some options using links. No input field on screen.
Please provide some input on this peculiar problem.
Regards,
Anup Batra

Hi,
If the user clicks a link to start a transaction,then he/she has to complete the transaction or abort that one.
To set the default behaviour for a transaction in the portal, the work protection mode setting is available.
Thanks
Muthukumar

Work Protect Mode in VC

Hi All,
Work protect mode is possible in Visual Application? If so, how can we achieve this functionality?
Kindly clarify.
Thanks,
Sridhar.

Hi Sridhar,
Work protect mode can be achieved by embedding your Visual Composer (WD) application inside a portal page, by creating a WD iView that points to the WD application. In a standalone WD application it's not available.
Regards,
Netanel

Work Protected Mode using WebDynpro application

Hi All,
Can any one provide me document on "Work Protected Mode" using WebDynpro application(Example required in Webdynpro only)
Help will be appricated
Thanks
Anup

Hi Anup,
Check this link: [Here|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8382535d-0d01-0010-dbb5-d3d41dfefd10]
Regards, Suresh KB

Portal work protect mode

Similar Messages

Maybe you are looking for