Portege 3110CT: How to install the Win XP or Win 2000?

I have old Portege 3110CT. Additionally I have floppy drive (which works fine) and CD-ROM F-TO-TCD-24L (PCMCI).
What I was going to do was to install Windows 2000. There is no posibility to boot install CD so I created start disks (x4).
After 4th disk booted I found the message that system is unable to find CDROM drive...
So I am asking you is there any way to install Windows 2000 or XP on that hardware ?
I wonder how?

yes, it is possible to install w2000 ( I won't advise to install XP, it will run too slow on a 3110 )
You need the proper drivers for your pcmcia-CD-drive and copy them to a dos-bootdisk
start-up with the bootdisk and go to your CD-drive with the W2000-CD in it
then type cd\i386 and start winnt.exe in that directory, it will install W2000 without problems.
because the DOS-envirement won't recognize a NTFS-partition, your harddisk must be formatted fat32.
in this earlier discussion you will find all the information you need about dos-diskettes, CD-drivers etc.... : http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=19232&messageID=70382

Similar Messages

  • How to install the Win XP on my notebook

    I have purchased a Satellite notebook, which came with Vista installed and a couple of discs to "rollback" to XP if I so desired.
    I find Vista to be an absolute dog of a product, so I inserted my XP disc and waited.
    Turns out there is no autorun file on the CD, and no obvious choice of a file to run at all.
    Can anyone explain how to return my notebook to the XP operating system?

    First of all it would be really useful to know what notebook you have.
    Secondly Im asking myself if you have read some threads here in the forum regarding the Win XP installation before you crated this posting
    Im not quite sure what the problem could be but Ive got an assumption.
    Its possible that you didnt boot up from the Win XP disk. You said you have insered it and waited
    The disk should be inserted and the notebook should be OFF.
    Then power up the notebook and boot up from the bootable disk
    The other possibility could be that you didnt install the SATA drivers (which are necessary for all newer notebooks) and therefore the Win XP cannot recognize the HDD and cannot go through the full setup.
    I recommend checking and reading some treads here in the forum regarding the SATA driver and Intel Storage Manger.

  • How to install the plug-in for SQLServer 2000

    Hello, All,
    I am installing Oracle Migration workbench (10.1.0.4.0), want to migration data from SQL Server 2000 to Oracle. I downloaded omwb.zip file and sqlserver2k.zip plug-in. I put the plug-in in “plugins” folder during the installation, renamed it as SQLSERVER2K.JAR, and unzip it there, the unzip process generated two folders: META-INF and Oracle. There is a MANIFEST.MF file in META-INF folder, and in oracle folder, several small folders folder with a lot of .class files. I started the OMWB.BAT file in bin folder, I still get the error information: “No okugubs are installed. Please install…. “.
    I tried many times, including rebooted the machine and restarted the OMWB.bat ifle, but still got the same error message. It should be a simple problem, but I just can't install OMWB becasue of the plug-ins problem.
    Could anyone who installed the OMWB before and know how to solved the plug-in problems help me?
    I am thinking: do I need to put all of the .class files in the folders into the “plugins” folder directly?
    Thank you very much for your help.

    you should
    1- Download Omwb.zip & MySQL4.zip from Migration WorkBench WebSite
    2- Unzip Omwb.zip (suppose it is unziped in C:\omwb)
    3- Copy MySQL4.zip to C:\omwb\plugins and rename to MySQL4.jar
    4- Execute C:\omwb\omwb.bat for WorkBench
    Good Luck
    S.Ahmad Pourreza Ahmadi From IRAN

  • I lost my photoshop cs5 instaler but ihave the serial number, how ican instal the program again

    I lost my photoshop cs5 instaler but ihave the serial number, how ican instal the program again

    Downloadable installation files available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  5.7.1| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5.5, 5 | 1
    Contribute:  CS5 | CS4, CS3 | 3,2
    FrameMaker:  12, 11, 10, 9, 8, 7.2
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • How to install the JDI  and what re the prerequisites

    Hi All,
    Anybody tell me ,
    AS iam new to the SAP NetWeaver
    How to install the JDI,
    I have got one document in  sdn . It has given the prerequisite as.
    Complete installation of DI (CMS, DTR, and CBS) on SAP J2EE Engine
    Should i install all the above component?  or any one of the components, if need to be, can u anbody tell me how to install , where i will get the help.
    How i need to setup the JDI.
    We are working on Webdynpro, and VC, some of the portal components development.
    Installing the DTR alone is enough to move forward, or JDI is required to  setup?
    Please repsond me.
    Regards
    Vijay

    Hi Krishna thanks for the reply,
    Our Current  Portal Version is
    NetWeaver 2004s SP 11.
    My question, should we need to install all these following components before we setup the JDI.
    Complete installation of DI (CMS, DTR, and CBS) on SAP J2EE Engine.
    or
    As per your reply , my understanding is , By installing the JDI , i will be getting all the above components.
    BCZ in that document it is gving clearly that, the above components are prerequisites for installing the JDI.
    Can u tell me where i will get that service packs in the service market place.
    Regards
    Vijay

  • How to install the Remote Desktop Services role on a Windows 2012 R2 Server

    Hello,
    I am a bit confused on how to install the RDP role on a 2012 R2 server. I have a two server domain and would like to make the second member server an RDP server to host applications (Word, Excel, a medical software, etc.) where users from their windows
    7 desktop will use the Remote Desktop Connection to connect to the server, create a session and do their work. When installing the role, I am prompted with two options:
    1- Role-based or feature based installation
    2- Remote Desktop services installation
    I see the RDP install option in both cases.
    1- Which one do I use?
    2- What role services do I install? (Connection broker, Gateway, Licensing, Session Host, Virtualization host and Web access). I think I need the first four only.
    3- When installing software after RDP, I use the Change user /install and Change user /execute commands. What happens to the software that is already installed? Can remote
    users use those?
    Any help will be very much appreciated.
    Thank You,
    Victor.

    TP,
    Thank you for your response. I added the RD Licensing thru the Role-based option.
    Also opened the local group policy thru gpedit.msc and added the server name and the licensing mode type to Computer Configuration -> Administrative Templates -> Windows Components -> Remote Desktop Services -> Remote Desktop Session
    Host -> Licensing
    Use the specified RD license servers = NameOfMyServer
    Set the Remote Desktop licensing mode = TypeOfMyLicense (Per User in my case)
    Thank you again,
    Victor

  • How to install The Soundblaster Audigy SE in Windows 7 RC?

    :How to install The Soundblaster Audigy SE in Windows 7 RC?Y Two days ago I bought a Soundblaster Audigy SE-retail soundcard. I have a dual boot PC with Windows XP-SP3 and Windows 7 RC. The installation of the soundcard?in Windows XP was easy, no problems, good sound.
    But how to install in Windows 7 RC ?
    I have the installation and applications CD with XP and Vista drivers and I have the driver-download from Creative.com SB24PCDRV LB 0 - 04 - 0090.
    Windows 7 tells me "No device for audio output is installed". Windows automaticly?installed a driver, but that doesn't work. (code 39). The driver download from?creative does not install new drivers and when I try it manually Windows tells me "The best driver is already installed"
    When I uninstall?the driver that Windows installed and try to install the downloaded?creative driver for Windows 7, the driver will not install, and Windows message is something like "?no audio device is installed on this computer"
    What to do ? A computer without sound is nothing...
    Thanks,
    Arie

    >Re: How to install The Soundblaster Audigy SE in Windows 7 RC?% Meocene is 00% on the money. Dan K.'s pack is the best. I have used the pack on four different systems with AUDIGY LS and SE cards that I bought cheaply (all four on Ebay for $40). The package has worked under XP, Vista, and Windows 7 very well.
    I have friends that play Left4Dead and they have been immensely pleased when playing the games in their flats with or without headphones, as compared to their old "onboard RE--t-k" sound.
    The package also works well on a Gateway or HP machine when disabling onboard audio first then installing the Audigy and installing drivers and apps for the first time. Gi've up on using your old CDs, you will only run into a mountain of trouble trying to "Auto-Update" all that with the newest patches.

  • I just bought a new computer and want to load in photoshop from the old one.  I have CS5.  Since CS5 was an upgrade I installed CS4 first, but now I can't figure out how to install the CS5 upgrade.  Any advice?

    How do I transfer photoshop from one computer to another?  I have CS5.  Since CS5 was an upgrade I installed CS4 first, but now I cannot figure out how to install the CS5 upgrade.  Any advice?

    karen2179 wrote:
    If you are able to use adobe products on two computer do I really need to deactivate or uninstall CS4?
    No, but it may help the chances of a successful installation.
    karen2179 wrote:
      Just as an aside - I have been getting messages on here from Adobe Admin saying that CS5 cannot be reinstalled because everything is now in the cloud and that for $350 I can buy CS6 to install on my new computer.  What?  Am I getting spammed on Adobe's site here?
    Where did you see that?

  • How to install the SAPRouter service on a Windows 2003 Server?

    Hi, can someone please either provide me with the instructions or point me to a URL or a SAP note that describes how to install the SAPRouter service on a Windows 2003 32-bit server?
    This is fairly urgent so your assistance here would be much appreciated.
    Many thanks
    Sharon

    I tried this and I get the following error...
    'ntscmgr' is not recognized as an internal or external command, operable program or batch file.
    Any further suggestions?
    S

  • Hi, can anyone please tell me how to install the Nik collection into Adobe Photoshop CC 2014.2.1

    Hi, can anyone please tell me how to install the Nik collection into Adobe Photoshop CC 2014.2.1 ?

    Glad I could help. Thanks for letting me know I did.
    Gene

  • How to install the camera raw plug in?

    how to install the camera raw plug in?

    Hi Andreaid,
    An easy way is to go to Help>Updates in whatever program you have that includes camera raw like Photoshop or Bridge.
    Thanks,
    - Dave

  • How to install the windows7 agent and monitor the same machine

    Hi ,
    I have installed OMS on Oracle Linux 5.7-64 bit machine. Now I am able monitor the OIM which is installed on Linux. I have some of oracle applications (domains) on windows7 machine. I want monitor the same. On em, agent deployment page I am not able to see the windows agents.
    Can you please guide me how to install the agent on windows and monitor the same?
    OEM version: 11.1.0.1
    Thanks in advance
    Regards,
    Kishore Tummeti

    If you just need to install some agents on Windows the best (imho) option is not to use the push option because getting Cygwin to run can take hours (if at all).
    Here you find a good instruction how to install the agent by hand: http://www.peasland.net/?p=122
    Sometimes the –silent mentioned in step 4b needs not to be put as second argument but as last argument.
    Eric

  • How to install the oracle lite mobile server?

    hi,every one!
    I follow the wizard of the oracle lite mobile server,then
    pop the window let me input the "host name""port"and "net server name",I have install oracle 9i,and establish a database named "oradb",establish an server named"oradb",the service can be listened and the port is "1521",but in the installation when i input the up numbers, it
    tells me that "invalid server name",how can i do?
    somebody that do me a favor tell me how to install the oracle 9i lite mobile server,it must be preciated!

    Andy,
    It sounds like you are not properly connecting to the back end Oracle instance when Lite attempts to install the Mobile Server Repository.
    Before attempting a re-install, why don't you try connecting to the same instance using SQL/Plus with the a connect string specifying hostname:1521:SID. If you are not able to connect you need to determine why.
    TNX,
    Phil

  • How to install the same copy of creative suite on the second computer?

    Basically I am using a Macbook Pro and upgraded my hard disk. A
    After I have recovered the data using time machine, I was unable to access my CS6 applications, which all became trial version. So I would like to know how to install the same copy of creative suite on the new drive.

    Transferring does not usually work - you need to install using installation files, the same way you originally installed the program(s).
    Download and Installation Help -
    https://helpx.adobe.com/download-install.html

  • How to install the Sample Apps in Hyperion Financial Management 11.1.2.2?

    Hi,
    Could please anybody tell me how to install the Sample Applications in Hyperion Financial Management 11.1.2.2?
    The following is written in the Administration guide:
    If you did not install the sample files, you can obtain them by reinstalling Financial Management
    and selecting the Sample Applications component.
    I cannot find the “Sample Applications component” among components during installation process.
    There are only “Financial Management ADM driver”, “Financial Management Web Application” and “Financial Management: services”.
    Hope this helps,
    Thank you,
    Vadim

    After you install the sample application, all of the application extracts can be found under the below location.
    Oracle_Home\Middleware\EPMSystem11R1\products\FinancialManagement\Sample Apps and Starter Kits\Sample Apps

Maybe you are looking for