Portege 3500 stylus not working in parts of the screen
my stylus on my portege isn't working in parts of the screen the parts change and are sometimes not there.
This happened after replacing the screen but not straight away.
Hello
I agree with previous user and also believe that there must be some hardware problem and it must be checked properly.
Contact service again and explain them what happen exactly. Sorry but I dont believe you can do anything alone.
Similar Messages
-
Dear Sirs,when i use the computer updating my iphone to ios 7.1,suddenly black out.The computer has no power and my iphone does not work and keep display the screen saying the iphone need to connect to itunes. So when i connect my iphone to iTunes, the computer says"itunes has detected an iphone in recovery mode. you must restore this iphone before it can be used with itunes"
So my question is if I click OK(restore the iphone),will i lose all my data and whatsapp??
Thank you for your help and time.
Regards,
hopelessIf you didn't back up the phone to iCloud or iTunes (on your computer) BEFORE attempting the update, the data will be lost.
-
Why does the swiping not work to scroll down the screen
why does the swiping not work to scroll down the screen or swipe from side to side
Thank you for the reply. But can you tell me what this configuration is about and how I should do this?
-
My iphone not work and wrote on the screen to connect itones
now my iphone is 3GS 32GB and not work in which on its screen drwrn a USB Symble to be connect to iTones
and before the charge of battery discharge and switch off when use any applications on the iphoneTry placing your iPhone into recovery mode.
http://support.apple.com/kb/HT1808?viewlocale=en_US&locale=en_US -
My itouch is not working when i touch the screen nothing happens it does not respond
my ipod does not respond when i try to slide to unlock it does nothing like if the thouch part does not work y is this happening?????
Try resetting it:
http://support.apple.com/kb/HT1430
Hope that helps. -
I dropped my iPhone 5S and it landed flat on it's face (it was in a protective case). Since then my touch screen display is not working properly. I have white and grey lines and/or blocks crisscrossing the screen both horizontally and vertically. Screen responds to touch in odd random ways, but rarely does what I am trying to do. Can't call or receive calls because can't dial or answer phone via swipe. Can't text or read incoming texts. All functions seem to be working except that I can't access them because the touch screen is acting up. If I move the phone around it randomly accesses different apps or functions, but I have no control over them once the appear on the screen. Touching screen just causes phone to randomly choose something else to open. What have I damaged?
Shanegang77 wrote:
What have I damaged?
We cannot possibly tell. Obviously some hardware inside. Take it in to an Apple Store. They will offer you the opportunity to swap the phone for $269 in the US. Prices vary by country. -
When I hook up my air to a LCD screen only part of the image on the air is projected. Solution anyone?
Basic troubleshooting steps clearly outlined in the User Guide are restart, reset, restore from backup, restore as new.
If you've gone through ALL the troubleshooting steps and you're still having the problem, then you most likely have a hardware issue and will need to bring your phone to Apple for evaluation. -
On my MacBook Pro, sometimes when I click to close tabs in Safari the button will not work. I have to click on some other part of the screen and then it will. This happens in other programs like Word/Excel for changing font, etc. Solution/Suggestions?
Start up in Safe Mode.
http://support.apple.com/kb/PH4373 -
HT1349 Stylus not working on iPad
Rubber stylus not working on iPad
it could be that the stylus is just bad. I have used cheap rubber ones before and found them to be horrible..
-
my device was not registered as part of the Developers Program and now my devices are not working, i can not restore nor update my devices... any suggestions? i was running my devices on iOS 7 Beta that i downloaded back in August
If you're not a registered developer, it means you've stolen Apple's software. Now you come to an Apple forum and ask for help? You're lucky you're not being prosecuted!
You can receive no help for stolen software here. Enjoy your iBrick. -
Why is my upper part of the screen is not working
my iphone 4 32 giga ios 5.0.1 screen is not 100% working, because the upper part of the screen is not really responding to me ,but the lcd screen is working fine, i cant swipe the notification screen down or use the apps in the top of the screen.
< Email Edited By Host >ok but the question is ,,,,,is my warranty working if i changed the broken screen from another fixing store "not apple " ...the screen looks like the old one but the upper part is not working ,,,and the fixer"not from apple" didnt know whats the problem with the new screen, i bought my iphone less than half year ago ,and if my warranty is still working where is the apple store located in Jordan ?
-
Powerpivot add-in installation issue "Could not find a part of the path"
Hello,
I got a Windows Server 2008R2 terminal server with Office 2010 and Powerpivot installed. I have an issue for some users, not every user get this error. When trying to add the Powerpivot add-in in Excel the following error message is displayed:
Name:
From: file:///C:/Program Files (x86)/Microsoft Analysis Services/AS Excel Client/10/Microsoft.AnalysisServices.Modeler.FieldList.vsto
************** Exception Text **************
System.Deployment.Application.DeploymentDownloadException: Downloading file:///C:/Program Files (x86)/Microsoft Analysis Services/AS Excel Client/10/Microsoft.AnalysisServices.Modeler.FieldList.vsto did not succeed. ---> System.Net.WebException:
Could not find a part of the path 'C:\Program Files (x86)\Microsoft Analysis Services\AS Excel Client\10\Microsoft.AnalysisServices.Modeler.FieldList.vsto'. ---> System.Net.WebException: Could not find a part of the path 'C:\Program Files (x86)\Microsoft
Analysis Services\AS Excel Client\10\Microsoft.AnalysisServices.Modeler.FieldList.vsto'. ---> System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files (x86)\Microsoft Analysis Services\AS Excel Client\10\Microsoft.AnalysisServices.Modeler.FieldList.vsto'.
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy)
at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)
at System.Net.FileWebStream..ctor(FileWebRequest request, String path, FileMode mode, FileAccess access, FileShare sharing, Int32 length, Boolean async)
at System.Net.FileWebResponse..ctor(FileWebRequest request, Uri uri, FileAccess access, Boolean asyncHint)
--- End of inner exception stack trace ---
at System.Net.FileWebResponse..ctor(FileWebRequest request, Uri uri, FileAccess access, Boolean asyncHint)
at System.Net.FileWebRequest.GetResponseCallback(Object state)
--- End of inner exception stack trace ---
at System.Net.FileWebRequest.EndGetResponse(IAsyncResult asyncResult)
at System.Net.FileWebRequest.GetResponse()
at System.Deployment.Application.SystemNetDownloader.DownloadSingleFile(DownloadQueueItem next)
--- End of inner exception stack trace ---
at Microsoft.VisualStudio.Tools.Applications.Deployment.ClickOnceAddInDeploymentManager.GetManifests(TimeSpan timeout)
at Microsoft.VisualStudio.Tools.Applications.Deployment.ClickOnceAddInDeploymentManager.InstallAddIn()
I have checked the path and I found nothing. I could understand the problem if all users got this error but it's online a handfew of users. Other users can add the add-in in Excel without any issue. All the users are in the same domain and they use the one
and only terminal server on the site.
Any advice? I've searched the web but haven't found anything.
Thanks in advance!Guys, I think I solved the
issue:
Symptoms
1. Power Pivot SQL 2012 32-bit installed over the old version without
deinstalling it
2. Installed with a user with administrator rights
3. It worked under the profile with admin rights, it didn't work under the
normal users w/o admin rights and threw this error message: Downloading file.///c:/Program files (x86)/Microsoft analysis services/AS Excel Client/10/Microsoft.AnalysisServices.XLHost.Addin.VSTO
did not succeed.
4. In the admin profile, it went to the path "110": C:/Program
Files (x86)/Microsoft Analysis Services/AS Excel
Client/110/Microsoft.AnalysisServices.Modeler.FieldList.vsto
5. In the normal profile, it went to the - wrong - "10" path:
C:/Program Files (x86)/Microsoft Analysis Services/AS Excel
Client/10/Microsoft.AnalysisServices.Modeler.FieldList.vsto
SOLUTION
1. ADMIN: Installed VSTO 4.0
2. ADMIN: Checked if the .NET Programmability Support was installed - it was -
if not, install it!
3. NORMAL USER: Create a .reg file (Backup your registry before!) and
use it UNDER THE NORMAL USER!!!
Windows Registry Editor Version 5.00
[HKEY_CURRENT_USER\Software\Microsoft\Office\Excel][HKEY_CURRENT_USER\Software\Microsoft\Office\Excel\Addins][HKEY_CURRENT_USER\Software\Microsoft\Office\Excel\Addins\Microsoft.AnalysisServices.Modeler.FieldList]
"Description"="Microsoft SQL Server PowerPivot for Microsoft Excel"
"FriendlyName"="PowerPivot for Excel"
"LoadBehavior"=dword:00000003
"Manifest"="C:\\Program Files\\Microsoft Analysis Services\\AS
Excel Client\\110\\Microsoft.AnalysisServices.XLHost.Addin.vsto|vstolocal"
"CartridgePath"="C:\\Program Files\\Microsoft Analysis
Services\\AS OLEDB\\110\\Cartridges\\"
4. NORMAL USER: Rename the registry key
"HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\User Settings\Microsoft.AnalysisServices.Modeler.FieldList"
into
"HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\User
Settings\Microsoft.AnalysisServices.Modeler.FieldList_old"
5. NORMAL USER: Start up Power Pivot and it should
work now!
Analysis
IMHO the issue lies in the fact, that the Power Pivot
installer creates two problems:
The first issue is that the path to the add-in under
the NORMAL user is simply wrong and points to a wrong location (the
"10" in the path). In the admin profile, where it was originally
installed, it points to the "110" path which is correct.
The second issue is that the installation procedure
somehow needs to create a registry key (the one under point 4 in the solution)
to complete it self and if this key already exists it fails to install and
throws up weird error messages. If you delete or rename this key, it is created
again (exactly in the same way) but then everything works out.
Hope this
helps!
Regards, Reto -
Just repaired cracked iPhone 4 screen and now part of the screen isn't working.
A few days ago, I cracked my iPhone 4's screen pretty badly. I was having absolutely no trouble with the screen after I cracked it, aside from the crack, of course. I just got the screen repaired yesterday and now the bottom left part of the screen sometimes doesn't work. When I'm using the keypad, the following characters are affected:
RDFCX (and sometimes E) 4 ; , } ~
Also, sometimes, when I press that part of the screen, it's as if the phone doesn't recognize my touch. This is affecting scrolling, the ability to move the cursor, and makes it hard for me to unlock my phone because sometimes the bar along the bottom won't slide. However, when I select apps using that portion of the screen on the home screen, it works just fine.
This started yesterday, about 2 hours after I got my screen fixed, then went away on its own a few hours later, and came back this morning.
Does anyone know what this problem is/ what I should do about it? I'm definitely going to go back into the store that fixed my phone and see if they can correct it.
**I did not get my phone fixed at the Apple store, I went to a store called BuyNCell which specializes in repairs of Apple and Blackberry products. I got my screen repaired as well as changed the casing on my phone to white.
Hopefully someone can help explain to me what's going on. Thank you!!
If it really matters, here's what my phone looked like before it was repaired. Yikes!This may sound crazy, but download any free app. This often "shocks" the other apps into working.
-
This does not happen on my laptop computer or on any other program my work computer runs.
That problem can be caused by the Yahoo! Toolbar or the Babylon extension that extents too much downwards and covers the top part of the browser window and thus makes links and buttons in that part of the screen not clickable.
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode -
Dashboard widgets not working. I trash the dashboard .plist and redo all widgets then after a restart. Widget not working again.
Yes hello,
My widgets are not working as well, i looked on forms and it seams that the 10.5 update fix there problems. I also did an archive and install from 10.4... One of the major reasons i purchased the upgrade was to use widgets to clip parts of safari, i'am totaly bummed because all forums i find end with the question un answered. i'am a little bummed becuase there are a couple of things that worked with 10.4 that are not working in 10.5 (like some meg moives not playing.
i do not wish to create a new account because i do not want to reinstall all my software, photoshop, final cut, dvd studio pro.. etc.
i hope to find the fix some how.
I have opened up the console application and when i select widgets load or delete them i see no activity in the console. I'am not familiar with the console app. or command lines.
is there any more info on this matter? is there any support from apple?
Thankyou
Maybe you are looking for
-
Issue with submitting podcast.
I recently submitted my podcast to the itunes store. As far as I know, everything was fine with the RSS feed. I was sent a rejection notice, so I went to look back, and realized that something within the description had come through screwy in the fee
-
HT4910 how do I import a calendar from Outlook?
I would like to import an outlook.com calendar into the iCloud calendar. Can you help me? Thank you! Cheryl
-
Editing a particular row in a table - Web Dynpro Abap
Hi all, My scenario is, I have to fetch contract details from EKPO table when I enter the Purchase Document Number and press SUBMIT button on my interactive form. The details will be displayed in a table. This part is working fine. Then, out of t
-
Hi, is it possible to use a REF cursor as a parameter for a job? I need jobs created with DBMS_SCHEDULER.create_job to process data which has always the same format but comes from different sources. The job must be generic and thus should not know wh
-
Hi,everyone,i'm a beginner of PL/SQL£¬ Who can recommend a pl/sql article to me. Thanks.