Portege A200 wireless on off doesn't work

hello guys someone please help. everytime i switch the wireless button on an error message comes up in a lovely blue screen. DRIVER_IRQL_NOT_LESS_OR_EQUAL
please help. this laptop is nothing but trouble, its well cute though. :)

Well really strange mostly such error message appears because of the hardware problem or because of the critical software malfunction.
If you enable the WLan switch at the notebook side the WLan driver should load.
Im not 100% sure but possible the Wlan driver causes this BSOD.
Try to uninstall the Wlan driver and enable the switch. It would be interesting to know what happens

Similar Messages

  • Error: wireless media transfer doesn't work

    Good day.I have a problem on my Sony z Ultra. It can not make a wireless wi-fi connection with my PC. A few times i have connected my phone with PC wireless, but then it seem to be that I have something spoiled. Now PC tell me that "it isn't possible to coordinate device parameters with this system"What can I do in this situation?

    Hey guysHave you read what the gentlemen above wrote?wireless media transfer doesn't work....not usb cable connection does not work.!!!  I have the same problem.Can you please help me with it? Win7Pro64bit, Sony Experia Z1 compactI follow all the steps as given by the phone, it even says, the devices are pairedbut when I want the devices to connect, it just hangs and then gives me message "It isn't possible to connect to [yourpc]" Can you please give me some troubleshooting steps?What to check, where to look, how it works, links, articles, anything? please Thank you Hugo

  • TS2634 Ipad 3 cover fault - magnetic switch off doesn't work. Anyone found a way to make this work please?

    Ipad 3 cover fault - magnetic switch doesn't work to switch off ipad when cover is closed. Anyone found a way to make this work please?

    Has this problem just cropped up or has it been there all along.
    The iPad 3 requires a Smart Cover with magnet aligned only in a certain way. This was not the case for the previous models of iPads. So some older covers will work with the newer iPads because their magnets just happened to be aligned just right. Other covers will not.

  • Satellite A200-1ZF - FN keys doesn't work in WIn7

    Hello all.
    Did someone had the same problem regarding FN keys on A200-1ZF?
    I've reinstalled the OS, Windows 7, and after installing all drivers, i cannot modify the light of display by pressing FN+F6 or F7.
    Also, doesn't work any option with combination of FN key.
    Does someone know how to resolve that?
    Thank you.

    Hi
    Im not A200 owner but Ive got A210.
    I could get the Fn buttons working under Win 7.
    Firstly in stalled the VAP for Win 7 and then I installed Toshiba Flash Card support utility for Win 7.
    I downloaded both tools from the Toshiba European driver page. I have chosen the tools released for Satellite L500.
    You should try this too.

  • Iphone 5 auto screen-off doesn't work sometimes

    it holds on until you don't touch the screen again. My device has already setted 1 minute time for automatic block but sometimes it doesn't work.
    Anyone with the same problem?

    Same here, 1 time at least that i have notice.
    Btw and i had experience the oposite, example: when i press the home button or on/off button to unblock the screen sometimes i have to press more then 3 to 4 times to appear image and unlock....
    anyone???

  • Touch pad on & off doesn't work

    I have the above notebook pc. Normally I use an usb mouse to navigate my notebook. I remember when first purchased the pc that the Touch Pad on & off light would work when I double tap, and I would connect the usb mouse.Now, when I double tap nothing happens. No light at all. The touch pad it self works fine even when the external mouse is connected.I'm just curious why it stopped coming on..........!

    I have the above notebook pc. Normally I use an usb mouse to navigate my notebook. I remember when first purchased the pc that the Touch Pad on & off light would work when I double tap, and I would connect the usb mouse.Now, when I double tap nothing happens. No light at all. The touch pad it self works fine even when the external mouse is connected.I'm just curious why it stopped coming on..........!

  • HT201412 How can I restart my iphone 4s if the screen 'slide to unlock' or 'slide to power off' doesn't work? Do i have to let the battery run out?

    My daughters 4s has frozen. Displays the 'slide to unlock' message but is unresponsive.
    Online help says resart device but I can't power off as the slide function does not work.
    Any ideas??
    Thanks.

    Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps BEFORE doing the reset.

  • My iphone is connected to wireless but internet doesn't work

    hi,
    my iphone 4s is connected to wireless, but the internet won't work. i know the internet is working, because i'm able to access it from my computers. and this problem is happening at every wireless network i've tried in the last 48 hours. it is connected to all the wireless networks, but is not getting internet. the phone works and i'm able to get texts. but none of the apps the use the internet are working. i do not have a data plan, so i can only access the internet through wireless.
    i have tried all of the following:
    i have restarted my phone.
    i have reset my network settings.
    i have turned off wifi networking in location services.
    still no dice. any other suggestions, short of wiping my entire phone?

    Hi there,
    This just happened to me and was super frustrating!  Thank you for your post and working out how to fix the bug.  I have one question.  After you reset your VPN in settings, did you resort your iPhone on your computer after?  I am just wondering if restoring it now will help stop the bug happening in the future?!?!
    Cheers!

  • Pixma MX432 wireless scanning function doesn't work

    I just purchased a Pixma MX432 multifunction printer. I set it up for wireless connection. The printer portion works fine. When I run the MP Navigator 5.1 to run the scanner, I get an error message: Canon MP Navigator EX has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.
    I have used a Pixma MX 410 since July 2011, and it worked fine wirelessly for both the printer and scanner until about two weeks ago, when the wireless scanner quit working and I got the same message as above. I tried reinstalling the software with no success.
    When the Pixma MX 410 ADF feeder quit working on a manual scanning function, I used my replacement guaranty and bought the Pixma MX 432. I still have the same problem.
    My software is Windows 7.

    Assistance needed, we purchased an PIXMA MX432 today, initially printing via LAN through an AT&T modem from two windows 7 64 bit OS laptops and one Apple Lion OS laptop.  Went to dinner, came back can no longer print, message states that printer is not responding or is offline.  Printer status: ON icon: green light. WIFI icon: blue light, unplugged waited three minutes and plugged back in.  Same status, no print. 

  • XML Datacaching Off doesn't work in IE 7

    In Dreamweaver CS3 (which is running Spry1.4), I tried
    turning off the XML Data caching and set auto-data refresh to say 5
    seconds. I then populated a page with the xml data using the Spry
    Table. I previewed the page in both IE 7 and FF2 (win) and both
    display the xml data in the table correctly. However, I then
    changed the xml data file. Only FF 2 would update the display based
    on the 5 sec interval. IE7 however, did not update the new xml
    data. Looks like either the XML data caching off or the auto-data
    refresh is not working in IE 7.

    Hi,
    This problem was discussed multiple times on this forum. The
    issue appears because the IE tries to be smarter than it should be
    and assume that everything should be cached unless is not said
    specifically "NO". Generally the problem appears when using
    generated XML from a server side script. In this special situation
    not all the headers information the browser expect are sent as they
    are for real XML files.
    Please read the following thread with a detailed answer:
    http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=72&catid=602&threadid =1282073&enterthread=y
    Regards,
    Cristian

  • Equium A200-1VO - touch pad doesn't work but external mouse does

    I had a problem with my hard drive not working this just happened over night so I replaced the hard drive no problem and rebooted the system.
    All is ok but the touch pad will not work.
    I have tried FN+F9 this is ok I have updated the touch pad program still not working.
    Please HELP!!!

    To determine if its an hardware issue or a software issue do the following...
    1) go into bios (f2) and set it to default settings and save
    2) insert toshiba recovery cd and wait till the menu appears
    You should be able to move the mouse inside the recovery GUI, if it doesnt move then try holding function and f9 again.
    If this still doesnt work then your touchpad could be faulty.
    *Note* dont start the wizard to recover vista because it will overwrite your data, just cancel this if the touchpad works under this.
    If not just turn your laptop off and remove the recovery disk.

  • Qosmio X300-15R - Touchpad on/off doesn't work on Windows 7

    Hi
    In the past i have used the Fn+ F9 to stop the touchpad from working (i usualy had a mouse nearby and that works better), now i tried to use it again and it doesn't turn on anymore?
    Only windows 7 (64bits) has been installed since.
    what do i have to do to get the touchpad working again?
    (i've already tried to install the value added package but that gives an error on instal)
    With kind regards
    P.S i am using speedfan to cheak my grafic card temperature because the laptop has been shuting down in the past (never does that with windows 7 though)
    and the temperature of the grafic cards gets over 100 degrees celcius, when plating the biggest games, is that normal?

    Well i stil haven't found a solution to my touchpad nor the temperature and now i've got an other issue.
    While it was working yesterday fine my laptop isn't making anymore sounds all of a sudden, i've done a system recover from last week but it still isn't working.
    Any clue's what to do to make it work again?
    with kind regards
    Edit a driver update for windows7 seems todo the trick.
    i still needa sollution for my touchpad btw. (the red bar above it is glowing red), ain't sure if that means its on though
    Message was edited by: arcan

  • Satellite A200-1UQ - Battery charger doesn't work

    Hi
    I got A200 1UQ and my battery charger doesnt work.
    Btw Im from Turkiye.
    Can I find the original one, if I cant can I use universal battery charger?
    Thanks

    On the Toshiba website you can search for a compatible charger and the part number:
    http://eu.computers.toshiba-europe.com => Peripherals & Services => PC Options & Accessories => PC Options & Accessories Home Page
    If you have the part number you can search with Google for this number. If you cant find something you should contact an authorized service provider. They can order all Toshiba parts.
    I hope I could help you a little bit.

  • Win TV Nova-T + Gigabyte GA-880GA-UD3H = POWER OFF doesn't work

    Umm, self explanatory really.
    I've been using the Win TV Nova-T card for years, first in my old PC running Slackware, then on this new one running Arch with my previous motherboard (some older ASRock). Ever since I upgraded to Gigabyte GA-880GA-UD3H a couple of months ago, the systems wouldn't shutdown. It goes through the shutdown scripts, gets to POWER OFF, HDD 'clicks' and... that's it. I have to press the power button to shut it down completely.
    Now since I was clueless about the cause, and my PC is running 24/7 anyway, I never really got down to fixing it, but yesterday I did a shut down but didn't press power button immediately:
    http://pkrd.ath.cx/100_0272.JPG
    http://pkrd.ath.cx/100_0273.JPG
    The cx88 pointed me to the TV card and removing it does in fact 'fix' the problem.
    Is that a compatibility issue, or maybe I need to adjust something in BIOS (I had a look, but nothing immediate comes to my mind) ?
    Last edited by lukaszan (2011-07-10 08:13:28)

    Quote from: Dr Stu on 30-January-06, 01:27:15
    before trying a new PSU, i would have tried a different type of memory
    ...???...LOL...I linked to YOUR sticky thread...     
    Now, the most common problems we see here in the Forums are those relating to your Power Supply Unit (PSU).

  • Wireless N enabler doesn't work . . .

    hi guys
    just brought a Express N, took awhile to setup but it's working now.
    problem is i can't seem to enable 802.11n on my macbook. Tried update, no luck.
    Can my macbook be 'enable' in the first place?

    Hi, You can only upgrade to 'n' if your macbook is a Core 2 Duo. The Core Duo models cannot be upgraded. Thanks.

Maybe you are looking for