Portege M200 - CD/DVD drive issue - error Code 39

I have a problem. I would like to perform a system recovery on my m200 tablet.
I have an external dvd drive (as the m200 does not have a built in drive), and the correct recovery disc.
However, due to a problem that occured some time ago, there is a problem with the driver (+Windows cannot load the device driver for this hardware.
The driver may be corrupted or missing. (Code 39)+), and so i cannot run the recovery.
If anybody knows a way that I can repair the driver, or another way to perform a system recovery, it would be extremely helpful!
A solution to one or both problems would be great.
Thank you very much!

Hi buddy
I think you try to boot from external driver which is not fully supported.
Please search in this forum for similar threads regarding the Protg M200 and booting from external CD/DVD drive.
I searched and found this:
The M200 supports the Recovery via BIOS (pressing "C") with USB 2.0 and PCMCIA cards (16bit and Cardbus 32bit).
Following drives and Controllers (USB, PCMCIA) are compatible:
a) Toshiba, PA3352E-SCD2, USB2.0 CD-RW/DVD-Rom Drive
b) Toshiba, PA3402E-1DV2, Rev.501, USB2.0 DVD Super Multi Drive
c) Toshiba, PX1055E-1NST with a PC Card (16bit), Cable II, PCMCIA,
d) Toshiba, PX1055E-1NST with a CardBus, Cable II, CARD BUS
You could be not able to recover the notebook using other external drives.

Similar Messages

  • Re: Cd/DVD drive issue - error code 39 on Satellite P series

    Hi,
    This is my first request for help.
    My CD/DVD drive is no longer recognized and when I go to Device Manager and click on CD/DVD I am informed that the file cdrom.sys is there but cannot be loaded.
    An error number 39 is reported.
    Any advice would be greatly appreciated but please keep it simple to one line actions if possible.

    Of course you can get some advices ;)
    I think you would find it faster if you would search in the forum firstly but I will try to help you too.
    There error code 39 is very common issue and can be solved easy;
    Check this MS knowledge base article:
    http://support.microsoft.com/kb/314060/en-us
    So firstly remove the CD/DVD drive from the device manager.
    Then access the registry using the regedit command and remove the Upperfilters and Lowerfilters values completely from the following registry key:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
    Reboot the notebook and wait till the CD/DVD drive was installed again.
    Thats it. ;)

  • Equium L300 - CD/DVD drive issue - error Code 39

    *Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)*
    This message is appearing in the device manager under CD/DVD ROM Drives for my laptop and is not running any cd's/dvd's.
    I don't know much about my operating system or laptop in general other than that it's a Toshiba Equium L300 running on Vista Home Premium
    Can anyone help me with this problem please?

    Hey guys,
    Thanks for the help and advice but after deleting the mentioned registry keys the problem still seems to be there, no cd/dvd is available and in the device manager the CD/DVDW SD-L622A ATA Device is still showing the same error
    *Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)*
    What else can I do are there other options?
    I tried a system restore but it couldn't do that.

  • Portege 4000 CD/DVD drive issues

    Afternoon,
    Has anyone experienced problems with the CD/DVD drive on the 4000 failing? If so had any luck in getting them to work again?
    Thanks
    Andy.

    Hi Andy
    Can you be more specific about your problem please? Which OS is running on your unit? Is the device recognized in device manager?
    Give us please more information about your problem with CD/DVD device.
    Bye

  • DVD Burn fails (Error code 0x80020022), newish drive, just applied updates

    Hello,
    when i try to burn a data dvd with a variety of files from finder on my power mac g5 it thinks a while and then fails with the message:
    Burning the disc failed because communication to the disc drive failed (Error code 0x80020022)
    I just downloaded the latest OS updates last night.
    Disc utility showed permissions problems in some files on my boot drive including in a darwin folder but they repaired fine.
    Two weeks ago apple replaced my superdrive and i hadn't tried burning a dvd since then, but cds did and do burn fine.
    This computer is under warrantee but in case the latest software updates caused this, or if someone has an easy fix that would allow me to save the trip to the store for analysis and potential couple day wait...
    i'm all ears!
    Thanks, Will
    Software overview
    System Version: Mac OS X Server 10.4.8 (8L127)
    Kernel Version: Darwin 8.8.0
    SONY DVD RW DW-U21A:
    Firmware Revision: AADB
    Interconnect: ATAPI
    Burn Support: Yes (Apple Shipped/Supported)
    Cache: 2048 KB
    Reads DVD: Yes
    CD-Write: -R, -RW
    DVD-Write: -R, -RW, +R, +RW
    Burn Underrun Protection CD: Yes
    Burn Underrun Protection DVD: Yes
    Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
    Media: No
    hardware
    Machine Name: Power Mac G5
    Machine Model: PowerMac7,3
    CPU Type: PowerPC G5 (2.2)
    Number Of CPUs: 2
    CPU Speed: 2 GHz
    L2 Cache (per CPU): 512 KB
    Memory: 2 GB
    Bus Speed: 1 GHz
    Boot ROM Version: 5.1.8f7
    Machine Name: Power Mac G5
    Machine Model: PowerMac7,3
    CPU Type: PowerPC G5 (2.2)
    Number Of CPUs: 2
    CPU Speed: 2 GHz
    L2 Cache (per CPU): 512 KB
    Memory: 2 GB
    Bus Speed: 1 GHz
    Boot ROM Version: 5.1.8f7
    Power Mac G5   Mac OS X (10.4.8)  

    Thank you for your help!
    At one point in the last few days i did run out of disk space on one drive, but i think i had 5Gig free on the short drive when i was trying it earlier, and i have upped that to 30.
    My spindled HP DV-16Xs worked on the drive i had before pretty darn well.. I've tried a bunch of unlabeled ones, i've also tried burning at 1x, and i went out and bought some jewel cased verbatim dvd-r 16Xs, same problem.
    I will take one more shot at finding the best media using that website, get some 8Xs if i can find them, before hauling it into apple.
    without the dvd burner it's hard to backup very well, I was planning to get a external hard drive next month.

  • My Mac OS X 10.4.11 will not write DVDs and gets error code 0x80020022, what is wrong?

    My Mac OS X 10.4.11 will not write DVDs and gets error code 0x80020022, what is wrong?

    That code is not really useful since it just means it can't write DVD's (or probably CD's).  The only thing you can do is first to try a different brand of DVD's, higher quality.  You could also try burning at a slower speed.
    Based on the fact that you are using an OSX that's no long supported, there's probably not much you can do to correct this issue if it is software related.  You may also have a failing Super Drive, another consequence of an older Mac.

  • HP LaserJet Pro M1536dnf Multifunction Printer (unable to add print driver hpfax1, error code 87)

    Hi, my printer HP LaserJet Pro M1536dnf Mfp, suddenly didnt work so i remove the printer, and downloaded a new driver  http://support.hp.com/us-en/drivers/selfservice/HP-LaserJet-Pro-M1536-Multifunction-Printer-series/3974271/model/3974278#Z7_3054ICK0KGTE30AQO5O3KA30R1 once dowloaded, i run it and uninstall the printer, restart my pc, and proceed to installing. but in the process of installing a error occurr, saying that "Unable to add printer, error code 87", and that " HP Toolbox FX has encountered an error and can not recover. once i click ok. it tells me to restart my pc and reinstall it again. i did it for 8x, and still with the same error. please help really need a help right now. as my boss is going to kill me

    Hey , Welcome to the HP Support Forums!
    I understand that you're getting the error 'Unable to add print driver hpfax1, error code 87' when installing your HP LaserJet Pro M1536dnf Multifunction Printer on your Windows 7 computer. I would like to assist you today with resolving this install issue. Thank you for including all of the troubleshooting steps that you have completed prior to reaching out for support. At this time I am going to walk you through some additional software and driver troubleshooting steps. Please follow all of the steps below.  If you're using your HP Laserjet through a USB Cable connection, please disconnect that cable now.  Step one: Remove Driver: 1. Click on your Start menu 2. Select Control Panel 3. Select Programs and Features 4. When Programs and Features opens a list of programs installed on your computer will populate. Click on the 'Installed ON' tab at the top to change the date so the recently installed items show at the top. This will make it easier to manually locate the three HP Laserjet items you need to uninstall.  5. Next, look for the HP LJ M1530 MFP Series HP Scan, HPLaserJetHelp_LearnCenter, and HP LaserJet Professional M1530 MFP Series. If you see any 3 of these, or all 3 of these items, please click on them and select Uninstall.   Once you have confirmed that those three items have been uninstalled, please close Programs and Features and proceed to the next step.   Step 2: Clear Temp Files:  Click on your Start menuIn the 'search programs and files' box located right above Start after you click on it, type %temp% and hit enter on your keyboardWhen the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will now highlight.Select the 'delete' button on your keyboard. The Temp folder contains temporary internet files. No actual files or folders on your computer will be affected by deleting the Temp files. Should a Temp file still be used than you will automatically get the pop up to 'skip' that item.Close the Temp folder once it is emptiedRight click the Recycling Bin on your desktop and select Empty Recycling BinPlease proceed to the next step.    Step 3: Download Installer Package:  Please click here to download the Full Feature Installer package. Once the download is complete, click on the download to allow it to 'Run'An extraction should now automatically occur. Once the extraction is complete an installer window will open. Please close the installation window.  You do not want to run the installation at this time.   Step 4: Run Scrubber:  To ensure that no trace of the HP Software and Driver package remain on your computer, I am going to have you run a Scrubber built into the installer package for your printer.  Click on your Start menuIn the 'search programs and files' box located right above Start after you click on it, type %temp% and hit enter on your keyboardWhen the Temp folder opens locate the 7z folder. Click on this folder to open it. This is the HP Laserjet Installer Click on the Utilities folder under the 7z folderDouble left click on Scrubber. It is an application which should launch the HP Uninstaller. Please follow the onscreen prompts to complete the uninstaller.    Once the uninstall has completed please proceed to the next step. Be sure to Restart your computer if the uninstall process prompts you to.    Step 5: Check Print Server Properties:  Click on your Start menuClick on Devices and PrintersIn the Devices and Printers window look for your HP Laserjet. If you see it listed please right click on it and choose 'Delete' or 'Remove Device'. Next, click on any device listed under 'Printers and Faxes' once just to highlight itClick Print Server Properties at the top of the windowClick on the Drivers tabLook for your HP Laserjet driver. If you see it click on it and click Remove at the bottomClick Remove Driver OnlySelect OKSelect Apply and OK on the Print Server Properties windowClose Devices and Printers. Please proceed to the next step.  Step 6: Run Disk Cleanup Utility: Click on your Start menuSelect All ProgramsSelect AccessoriesSelect System ToolsSelect Disk Cleanup Run a Disk Cleanup on the C DriveWhen prompted, check Downloaded Program files, Temporary Internet Files, Recycle Bin, Temporary Files, and Thumbnails Once the Disk Cleanup is complete, please proceed to the next step.    Step 7: Run CCLeaner:  To ensure that there are no malicious files on your computer or Registry conflicts on your computer I am going to have you run a CCLeaner before we install your printer. Please click here to download the CCLeaner Tool. Once the website opens select the link at the top for 'Free Download'. Once the download is complete please complete the Scan. Should multiple malicious files be found you may need to run the Scan multiple times to remove all malicious files. Once your system comes back as clean, please proceed to the last step.    Step 8: Install Device:  Please click here to download the Full Feature Installer package for your HP LaserjetOnce the download is complete please allow the download to RunPlease follow the onscreen prompts to install your HP LaserjetIf using a USB Cable connection please do not plug in the USB Cable until the installer window prompts you to  Once the installation has completed successfully please test your machine to confirm that everything is functioning properly. Please respond to this post with the result of your troubleshooting. I look forward to hearing from you. Good luck!

  • With PRE 8 when I try toExport & burn a DVD, I get error code 150:30

    With PRE 8 when I try to Export & burn a DVD, I get error code 150:30
    What is wrong?
    Thanks, Tom
    My Laptop is
    Dell Studio 17 Laptop PCS17HN
    Windows 7 Home Premium
    Processor Intel® Core™ i7-720QM Quad Core Processor 1.6GHz
    6GB, DDR3, 1333MHz, 2 DIMM
    (2) 500 GB Dual SATA Hard Drive (7200rpm) - lots space available
    1GB ATI Mobility Radeon™ HD 4650v + TV Tuner
    17.3” HD+ (900p) Bright LED Display with TrueLife™ and Camera/Facial Recognition SW
    Dell Wireless 365 Bluetooth Internal (2.1) [$20.00]
    8X DVD+/-RW Dual Layer Drive8X DVD+/-RW Dual Layer Drive
    + Roxio Easy CD & DVD Burning - Enhanced Burn/Authoring
    Soundblaster X-Fi Hi Def Audio - Software Enabled

    Please work through the troubleshooting steps in the FAQs to the right of this forum.
    http://forums.adobe.com/thread/415318?tstart=30
    If you'll tell us in as much detail as possible the results of each step, we'll likely be able to diagnose your problem and recommend solutions.

  • I am trying to burn a CD and keep getting this error message: Burning disc failed because communication to the disc drive failed. (error code 0x80020022)  Any suggestions??

    Burning disc failed because communication to the disc drive failed. (error code 0x80020022)  Any suggestions??

    Sadly, that error has umpteen causes, sometimes the drive is going out, sometimes it's bad media, sometimes a slower burn works, & rarely a Cleaning Disc helps.
    Bad File names can even cause it...
    http://www.bbqiguana.com/2010/02/macos-x-error-0x80020022-trying-to-burn-dvds/

  • ITunes 7.3 failed back up data DVD burn had error code 261(0x00000105).

    Just bought a bunch of new songs and went to back them up in iTunes 7.3 and I keep getting error code 261(0x00000105).
    Any ideas? Did not have this problem in prior versions. Brner works fine with other programs.
    Thanks!
    Home Brew   Windows XP Pro  

    Keep getting the same error as well. Run cd/dvd diagnostics and it should tell you... "The last failed data CD or DVD burn had error code 261(0x00000105)".

  • ITunes for 64bit Windows 7 Driver/CD/DVD/Drive Issues-

    Hi There
    I am sure that there are many many users out there suffering the same frustration as me in regard to ITunes just not working properly with Windoews 7 (64Bit).
    I have been trying to solve the mystery of "ITunes for Windows Registry Settings Warning When Opening Itunes.
    I have tried all the recommended actions to correct this problem without any success and I do mean ALL.
    Below is a screen shot of my registry, can anyone see anything wrong with it?
    In the meantime (Last four months) I have stopped using ITunes and instead have used Digital 7, this will be my very last attempt to get ITunes working properly, failure will mean consigning ITunes to the same place as any other Software that does not do wshat it says on the can.
    I hope someone can help.

    That's good that it is in device manager, but what about in Computer with the rest of the drivers?
    Also, are the drives listed in Computer and device manager or just device manager?
    I want to verify if the symptoms are present for a particular software issue before looking at other issues.  I really doubt it is a driver issue at this point.  If it was, then I suspect the issue would be present from day one. 
    It could be that the lens has dust buildup preventing it from working properly.  They do make CD cleaning kits that have a special CD designed to clean the laser as it passes over the lens.  If you happen to have one of these, or access to one, I recommend trying this step to make sure it isn't as simple as dust buildup interfering with the laser. 
    It could also be hardware failure, but I would like to try a few other steps before coming to that conclusion. 
    It may be worth reviewing this document as it covers a lot of the most common issues behind DVD drive issues. Feel free to skip any steps you have already tried. 
    Let me know what happens. 
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • I still have Cd/DVD drive issues

    The CD is ejected after a short while and never mounted. I have cleaned the optics of the CD drive and reset my PRAM.
    Has anybody discovered a complete solution for this problem.

    That's good that it is in device manager, but what about in Computer with the rest of the drivers?
    Also, are the drives listed in Computer and device manager or just device manager?
    I want to verify if the symptoms are present for a particular software issue before looking at other issues.  I really doubt it is a driver issue at this point.  If it was, then I suspect the issue would be present from day one. 
    It could be that the lens has dust buildup preventing it from working properly.  They do make CD cleaning kits that have a special CD designed to clean the laser as it passes over the lens.  If you happen to have one of these, or access to one, I recommend trying this step to make sure it isn't as simple as dust buildup interfering with the laser. 
    It could also be hardware failure, but I would like to try a few other steps before coming to that conclusion. 
    It may be worth reviewing this document as it covers a lot of the most common issues behind DVD drive issues. Feel free to skip any steps you have already tried. 
    Let me know what happens. 
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Oracle ODBC Driver Specifc Error Codes

    Dear All,
    I'm currently working in a migration assignment.I'm looking for a Technical document which consists error codes specific to Oracle ODBC Driver(ver.9.00.11.00).Any help in this regard will be appreciated.
    Thanks & Regards,
    Sam

    There shouldn't be any Oracle ODBC Driver specific error codes. When you're talking about ODBC and error codes, there are two possibilities-
    1) You're looking at the SQLState return codes. These are part of an ISO standard (they're more than happy to sell you a copy) and are documented in the ODBC Programmer's Reference from Microsoft as well as most decent ODBC guides.
    2) You're looking at the Oracle specific error codes that are returned as the error text in ODBC. These (potentially) depend on the version of the database you're connecting to, rather than the version of the client software you have, and are covered in Oracle's error message manual available at tahiti.oracle.com
    Justin

  • I have burned CDs before from 2gb to 7gb using different types of discs. Now I get this error message Apple error The disc can't be burned because communication between the computer and the disc drive failed (error code 0x80020022). What should I do

    I have burned CDs before from 2gb to 7gb using different types of discs. Now I get this error message Apple error The disc can't be burned because communication between the computer and the disc drive failed (error code 0x80020022). What should I do

    Reset the SMC, as per > Resetting the System Management Controller (SMC)
    1. Shut down the computer.
    2. Unplug the computer's power cord.
    3. Wait fifteen seconds.
    4. Attach the computer's power cord.
    5. Wait five seconds, then press the power button to turn on the computer.
    Then zap the PRAM/NVRAM as per > About NVRAM and PRAM
    1. Shut down the computer.
    2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    3. Turn on the computer.
    4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    5. Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    6. Release the keys.
    Then retry the Disc Drive.

  • Any solution to DVD drive issue post Lion install yet?

    Any solution to DVD drive issue post Lion install yet?

    Since installing Lion no DVDs are being read by the superdrive, this is a problem that has been highlighted by quite a lot of people.
    CDs are being read fine.
    After inserting the DVD there is some noise, sounds like it is trying to pickup the DVD then spits it back out.
    Previous posts from other people:
    http://www.mac-forums.com/forums/os-x-operating-system/245917-heads-up-lion-supe rdrive-fake-glitch-possibly.html
    https://discussions.apple.com/thread/3199297?start=15&tstart=0

Maybe you are looking for