Portege M200: How to start the OS installation?

I have a m200 and it is going all over the place i don't think i'm technical enough to fix it, even with extensive help.
I want to to a reset/install but obviously i need a compatible external drive for that which i cant afford.
I want to boot off of an SD card which i heard i could do. Do i just copy the files from the recovery dvd over to the SD card?
Can i get hold of another copy if i have lost mine?

Well, to install the OS on this drive you will need a compatible drive (as mentioned)
Of course the unit supports SD card booting BUT to use it you have to use the Toshiba SD memory Boot Utility which is preinstalled on your image.
This utility will create simply booting files on the SD card to boot into the DOS mode.
Its a similar to a bootable MS-DOS floppy disk.
As you see you cannot use the SD card to install the OS :( unfortunately

Similar Messages

  • How to start the datasocket in VC++ ?

    How to start the data socket in VC++? In my application, i need to link to pc , so in order for me to start running the data socket, is it mean this two pc have to install with measurement studio software? after that, how can i code the server side so that the server pc can get the text file from client's pc?

    Hi,
    The DataSocket server is an executable, so you can just lunch it as any other executable. You can use the system commmand or any other way.
    Once the server is running you can just use the connect method to start up the communication. You don't need measurement studio in the client machine, all you need is to create create an installer that includes the DataSocket component as any other MStudio controls.
    Hope that helps.
    Regards,
    Juan Carlos
    N.I.

  • How to start the netweaver portal to publish the reports

    Hi gurus,
                    could any one body tell me how to start the netweaver portal, I am in the SAP management  console screen.
    I need to publish the SAP 3.5 query reports in to netweaver portal
    PLease help me

    Logon the portal as  system admin
    Create a SAP system, connect to the BW
    then create a BW 3.x query iview  in the Portal Content studio.

  • How to start the IR part in XI

    Hi All,
    How to Start the Design part in XI while Converting the PDF file into Text file using Module Processor?
    Pls let me know.......
    Regards,
    Govindu.

    Govind,
    If you want some changes to be done to the file like mapping etc then you need to have the IR setting done too.
    But if you are going to use XI as an FTP service you need no configuration on the IR except creating the Datatype , message type and message Interfaces .
    Take a look at this blog,
    <a href="/people/shabarish.vijayakumar/blog/2006/04/03/xi-in-the-role-of-a-ftp">XI in the role of FTP</a>
    Regards,
    Bhavesh

  • TS1538 How to starting the  '' Apple mobile device '' on my iphone to connect on itunes?

    How to starting the  '' Apple mobile device '' on my iphone to connect on itunes?

    Refer here:
    How to restart the Apple Mobile Device Service (AMDS) on Windows
    http://support.apple.com/kb/TS1567

  • How to start the Oracle 8i client in redhat 7.2?

    I have installed properly oracle 81 client and server properly.
    I wanna access anothe linux server. But I don't know how to
    start the clent ?..And what are should be done to access the
    remote oracle server?
    Thanks

    apusumit wrote:
    please provide me details steps of start/stop oracle 9i database . we have four nodes .So i would like to know the steps of shutting down database including all nodes & also starting up and any prerequisite?
    Edited by: apusumit on Jun 10, 2011 5:32 AMrefer the link:-
    http://www.puschitz.com/InstallingOracle9iRAC.shtml#StartingAndStoppingOracle9iClusterManager
    also,
    please post the question in
    Forum Home » Grid Computing » Real Application Clusters
    Good Luck.

  • How to start the Message Server?

    Hi,
    I wish to start the J2EE engine and for the same it is mandatory to start the Message Server first.
    In order to start the message server, I run the following command:
    <i><b>D:\usr\sap\J2E\SYS\exe\uc\NTI386>msg_server start
    msg_server=>sapparam(1c): No Profile used.
    msg_server=>sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
    [Thr 7972] Wed Jul 25 23:39:18 2007
    [Thr 7972] *** ERROR => MsSetWorkDir: chdir D:\usr\sap
    D00\work [msntserv.c   170]
    [Thr 7972] *** ERROR => MsSPrvInit: MsSetWorkDir [msntserv.c   87]
    [Thr 7972] *** ERROR => mainU: MsSPrvInit [msxxserv.c   1634]</b></i>
    I gave my best time to search for Profile configuration details. But I could not do that.
    <b>Can  somebody tell me how to start the Message Server?</b>
    regards,
    Anand

    Hi Anand,
    Will be good to know what OS are you using...
    If you're tryng to start an instance use <prompt>: startsap pf=<profile of the system you want to start>
    If you logon as <sid>adm just type startsap
    If for some reason you need to start only the message server try  <prompt>: msg_server start pf=<profile of the system you want to start>
    Regards
    Juan
    Please reward with points if helpful

  • How to start the server. Urgent.

    I mistakenly deleted the icon from the Start menu, to start the SAP IDES server in my laptop. How to start the server from any other path.
    I installed it in E drive (2003 server). Database path is F drive.

    Hi,
    Check the following path
    E:\Program Files\SAP\FrontEnd\SapGui
    Here the actual Logon Pad file would be stored with name "SAPLOGON" or "SAPLGPAD".
    Create another shortcut for above file on your desktop.
    Best regards,
    Prashant

  • How to start the oc4j server

    I install oracle 9ias 9.0.3,but i don't know how to start the oc4j server.
    thanks for any help?

    hi
    Refer "Starting and Stopping OC4J" from
    http://otn.oracle.com/tech/java/oc4j/doc_library/902/A95880_01/html/toc.htm
    hope this helps.
    shrini

  • How can start the free trial of adobe captivate 8

    how can start the free trial of adobe captivate 8

    Hello,
    Welcome to Adobe Forums !
    You may simply download using the link below
    https://www.adobe.com/cfusion/tdrc/index.cfm?product=captivate
    If you need any help while doing this you may Contact Customer Care .
    Thanks
    Himanshu

  • My computer was stolen! How to deactivate the old installation?

    Hey, I need to use my serial number o install the CS6 on the new computer (Mac), because the old one was stolen. How to deactivate the old installation.

    Hello!Thank you for your answer, but still I can not connect with anyone who can help me. Chat is not working, I tried for the past three days. I bought this program together with educational kurs and now I need it to do my study. Could you help me please to activate Adobe Creative Suite 6 on my new computer?With best wishes,Tania.
         Jeff A Wright <[email protected]> schrieb am 20:26 Dienstag, 16.Dezember 2014:
    |
    My computer was stolen! How to deactivate the old installation?
    Jeff A Wright marked hans-g.'s reply on My computer was stolen! How to deactivate the old installation? as helpful. View the full replyMarked as helpful:Hello Tania, please have a look there: http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html >>> Deactivation or sign-out problems >>>I cannot access my previous computer >>> I quote: "... Ask Adobe Support to help you deactivate from a machine you cannot access. .... Have your serial number or Adobe ID ready, and then contact us." See Contact Customer Care  >>> click through and if "open" please use the chat, I had the best experiences. I quote from Adobe's employee Preran: The chat button is activated as soon as there is an agent available to help. Hans-Günter
    Following My computer was stolen! How to deactivate the old installation? in these streams: Inbox
    |

  • Want to install Windows 7 to my Mac with Boot Camp, but my laptop's monitor is broken. How could I start the Windows installation through an HDMI video source?

    Hi everyone,
    I'm trying to start a bootcamp installation of Windows 7 though an external monitor using HDMI. Is there anyway to have the installation screen show up on the external monitor? I get stuck at the beginning of the installation due to not being able to use my laptop's primary screen.
    Thanks for the help!

    Kapil Choubisa wrote:
    when I try complete step 2, it always says "The Installer dick could not be found".
    Unless you have a 2010 Mini Server model, your Mini has a built-in Optical drive (Mac mini (Mid 2010) - Technical Specifications).
    Can you read the Windows Installer media when booted on OSX? Your DVD media may be corrupt.
    If your Optical Drive is functional AND the Windows DVD is readable in OSX Finder, then your installer should work. You will need a USB2  for BC drivers as well.

  • I was wondering if someone could tell me how to start the installation for CS5.5 when downloaded no disk?

    I have lost my Adobe disk and have followed the instructions to download the file now from the Adobe website.  I now have the download but it is doing nothing to start the install process.  I was wondering if someone may be able to help me with where I go from here? 
    I have the icon on the desktop and when I double click it it just opens up to all the files.  There is a Install folder I click on it and nothing happens. I keep getting errors and have no idea what to do now. Help please?
    Thanks!

    Hi Kglad
    what's your os?
    Yosemite 10.10.2
    what file (name and extension) did you download?
    Downloaded from here:
    Download CS5.5 products
    Used the English Mac OS X file 1 of 1
    what program/suite are you trying to install?
    CS5.5 Master Suite
    The file downloaded file.  Asked me to click complete (or something like that ) I did.  It then added the icon to my desk top.  Now it just seems like it needs to start the install but it never launches.  I double click on the file and it opens up the folders in Finder.  I then have options of Deploy, Install, Payload and Packages. I double click on Install and nothing happens.
    I have no idea where to go from here.  The error that keeps telling me to reinstall Indesign etc (what ever Adobe program I click on I get the same) keeps happening.
    We have this problem now because we had to replace the harddrive on the Mac to and upgraded to Yosemite to get some other issues sorted.  Since then we can't do anything with the Adobe programs.

  • How to start the Toshiba Ghost image files from the HDD

    Hello
    Ok this is a tough one but hopefully some tech/wizz can help me out.
    I have all the necessary CD Recovery disc but my Toshiba laptop CDRom has died and i'm looking for replacement at the moment.
    I have managed to copy the image files and all the other info from these CD's onto the laptop hard drive via a network from my desktop cdrom. I did try to use the desktop cdrom to boot the 2.5" laptop drive but it knew it wasnt a toshiba laptop so wouldn't let me recovery.
    However now I have manage to copy all the ghost image files onto the laptop hdd I'm stuck on how to run installation via dos.
    The laptop hdd is formatted and all i have are the following files
    span.bmp
    setenv.bat --------> batch file contains following lines
    @ECHO OFF
    SET GHOSTPAR=
    SET SWN=01237000
    SET EXT=GHO
    SET VOLLABEL=%SWN%
    SET FILENAME=%SWN%.%EXT%
    01237001.GHS------> PART 2 OF IMAGE
    01237000.GHO -----> GHOST IMAGE MAIN
    01237000.CRC
    A folder called G_INST
    which contains 3 extra folders BMP, DOS and TOOLS and span.bmp
    I cant figure out how i can run ghost to extract and recovery my HDD can someone help me :)
    Thanks in advance
    Simon

    Im really skeptical if you will be start the Toshiba ghost image files from the second partition without using the Symantec Norton Ghost software.
    I have created a ghost image of the C partition and placed it on the D partition.
    To recover the C partition I have to start the Ghost Utility and have to use the image file .gho from D partition
    I have googled a little bit and found the useful instruction how to recover the Portege M3500 without using an CD/DVD drive. Maybe this will run also on the Sat A30.
    http://mobilepcwiki.com/mpc/index.php?title=Toshiba/Portege_M3500/FAQ
    By the way: the internal, compatible ODD can be ordered from the ASP in your country!

  • How to stop the impending installation of 8.0.1 upon FF restart?

    I clicked on the install link for FF 8.0.1 on the Mozilla website. I thought it would download an executable file that I could use when I was ready. Instead it started the install process, and is now waiting for me to restart FF to complete the install of 8.0.1. I'm running FF 3.6.24 and I DO not want to install a newer version at this time. I haven't restarted FF and want to know how to eliminate FF 8.0.1 from finishing the install.

    I am not certain about this so try it at your own risk. <br/>(Low risk: It either will stop the update or it will not, and it is possible to reinstall Firefox 3.6.24 without data loss if necessary)
    Rename the Files ''update.mar'' and ''updates.xml'' to something like update.mar.old and updates.xml.old
    File path on Windows XP something like
    C:\Documents and Settings\UserName\Local Settings\Application Data\Mozilla\Firefox\updates
    * your file path may well differ, different OS, and I have custom installs
    * see also http://kb.mozillazine.org/Software_Update
    edit - the above method does at least work stopping a point update. I have just tried it, but have not tried stopping an upgrade from 3.6 to 7

Maybe you are looking for