Portege M200 - SD Format Utility and Boot utility won't work

I can't get either the SD format or the boot utilities to work. Neither of them see the SD card which is a new Panasonic 256MB one. I've uninstalled the utilities and SD drivers and reinstalled them (in the correct order, as far as I can tell) but to no avail.
Has any one any suggestions as to why these won't work?

Smart Card services are not set to automatic but I've resolved the problem in any event. It turns out that the SD host controller driver was incorrect. I had obviously updated it at some stage and that resulted in a Microsoft driver being installed instead of the Toshiba one. Once I installed the correct Toshiba driver and reinstalled the format and boot utilities evrything is now working properly.
But thanks for your suggestion.

Similar Messages

  • I upgraded to Mavericks and now some of my utilities --- such as disk utility and system information no longer work.

    I upgraded to Mavericks and now some of my utilities --- such as disk utility and system information no longer work. I find Disk Utility useful and would like to have it. Doesn't Makericks include

    Boot into your recovery partition (restart, hold down ⌘R until you see the Apple logo), and use Disk Utility to repair your hard drive. Repair permissions too while you're there. OS X: About OS X Recovery
    If that doesn't work, I'd reinstall Mavericks over your current installation.

  • I just updated my Iphone 3G and now it won´t work anymore. It wouldn´t even boot. It was just working for 3 sek. after the installation and now it shut itself down. Any help, please?

    I just updated my Iphone 3G and now it won´t work anymore. It wouldn´t even boot. It was just working for 3 sek. after the installation and now it shut itself down. Any help, please? Thankyou

    I suspect you have a 2G iPod. Those can only go to iOS 4.2.1.
    Identifying iPod models
    iPod touch (3rd generation)
    iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
    The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.
    You also said: "It also will not let me download any music onto it." What happens when you try to sync music to the iPod?

  • I've just updated my iPhone to the new iPhone OS and now it won't work and iTunes won't recognise that it's there.  I've uninstalled iTunes and reinstalled twice and it's not working.  Please help.

    I've just updated my iPhone to the new iPhone OS and now it won't work and iTunes won't recognise that it's there.  I've uninstalled iTunes and reinstalled twice and it's not working.  Please help.

    I have not had wifi since November when I upgraded to the newest IOS version.  I called the Apple help line and they told me some things to do and I tried them all and they worked for a few hours and then wifi shut off again.  I kept doing what they told me and it worked for a couple more days and then I could never turn it on again.  My blue tooth doesn't work either.  I had to actually increase my data usage with AT&T becuase of this.  When I did that in December I went to the Apple store and was told that it is a hardware issue and since my phone is out of warranty I would have to pay for a new phone because they could not fix the issue.  My upgrade isn't up until June 2014 so not only do I have to wait for the upgrade and I am not paying for a new phone but I have to pay $10 plus extra a month on my cell phone bill because I was going over on my Data!!!  I have been beyond upset about this and Apple is not doing anything about this nor did they offer up some way to resolve the issue because obviously it is not just some rare incident if several people are having this issue.  Who knows how many people out there have had this issue and have not said anything about it.  Now there is a newer update that I can't do because it requires wifi in order to download.
    June can not get here fast enough and I may not go back to Iphone after dealing with this for so long with no help from Apple.

  • I am having a big problem. I am not getting notifications from snapchat and only snapchat. I've made sure every notification setting was on and it just won't work. I have also restored my phone and deleted the app and re-downloaded it multiple times. Help

    I am having a big problem. I am not getting notifications from snapchat and only snapchat. I've made sure every notification setting was on and it just won't work. I have also restored my phone and deleted the app and re-downloaded it multiple times. It just wont give me my notifications. Help please.

    Go to Settings > Privacy > Location Services.
    Turn off SnapChat.
    Go to Settings > Notification Center
    Turn off SnapChat.
    Restart the device.
    Go to Settings > Privacy > Location Services.
    Turn on SnapChat.
    Go to Settings > Notification Center
    Turn on SnapChat.
    Test the issue.

  • My game center won't load and shows up blank when I try to open it. I've already tried to close all the apps and restart it and it still won't work. Is their anyway to fix it without restoring it??

    My game center won't load and shows up blank when I try to open it. I've already closed all of my apps and restarted it and it still won't work. Is their anyway to fix it without restoring it and starting over??

    Try:
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - sign out and the sign back into Game Center
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       

  • My microsoft word and excel programs won't work and files won't open.

    After an automatic HP update, my Microsoft Word and Excel programs won't work and my files won't open.  What caused this and what can I do to fix the problem without losing my files?  I have files that are part of my work and I HAVE to have them ASAP.  Please help.
    Thanks in advance.

    Hi
    Please find the steps to resolve your issue.
    Open Installed Updates by clicking the Start button , clicking Control Panel, clicking Programs, and then, under Programs and Features, clicking View installed updates.
    Click the update that you want to remove, and then click Uninstall.  If you are prompted for an administrator password or confirmation, type the password or provide confirmation.
    Or Try this step
    If this does not resolve your issue then you can try a System restore to the date where unit was working fine steps provided below for you.
    Start in search box type System Restore then click on it then select the Date where unit was working fine.
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • TS3212 when installing iTunes on my new laptop a message box appears saying some sort of error has occured and i have to uninstall it then reinstall it again and it still won't work what should i do?

    when installing iTunes on my new laptop a message box appears saying some sort of error has occured and i have to uninstall it then reinstall it again and it still won't work what should i do?

    Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you? If so, does iTunes launch properly now?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • I tried to update my 4s and now it won't work. Is there anything I can do? It's only 6 months old..

    I tried to update my 4s and now it won't work. Is there anything I can do? It's only 6 months old..

    Yes, connect to your computer with the latest version of iTunes installed and restore it. If it doesn't show up in iTunes when you connect it see: http://support.apple.com/kb/HT1808

  • My computer won't let me run the setup.exe file. I am an admin I've run as admin and I've downloaded many times. I just reformatted my computer and now it won't work.

    My computer won't let me run the setup.exe file. I am an admin I've run as admin and I've downloaded many times. I just reformatted my computer and now it won't work.

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430http://support.apple.com/kb/ht1430
    If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808http://support.apple.com/kb/ht1808
     Cheers, Tom

  • HT201210 I tried to update my iphone and now it won't work at all

    I tried to update my iphone and now it won't work at all

    Yes, connect to your computer with the latest version of iTunes installed and restore it. If it doesn't show up in iTunes when you connect it see: http://support.apple.com/kb/HT1808

  • I clicked update for facebook And now my iPod touch 4th gen won't let me download the Facebook app I've turned it on and off like 5 times and it still won't work can you please help me

    I clicked update for facebook And now my iPod touch 4th gen won't let me download the Facebook app I've turned it on and off like 5 times and it still won't work can you please help me

    Seems to be an Apple or FB app problem. Nothing you can do but wait for it to be fixed.

  • Itunes updated and now it won't work.  I unstalled it and reinstalled the older version and it still won't open. Says the itunes library won't work with the older program. Help

    Itunes updated and now it won't work.  I unstalled it and reinstalled the older version and reinstalled a older version and it still won't open.  Says the itunes
    library won't work with the older program.  Please help

    It says it cannot removed the older version of iTunes.
    Doublechecking before proceeding ... what's the precise text of that message, please? (There's a couple of different ones I can think of that you might be getting.)

  • I have Stickies 6.0, I upgraded to 10.6.8 and now it won't work, is there any way to recover my old Stickies info?

    I have Stickies 6.0, I upgraded to 10.6.8 and now it won't work, is there any way to recover my old Stickies info?

    Yes, connect to your computer with the latest version of iTunes installed and restore it. If it doesn't show up in iTunes when you connect it see: http://support.apple.com/kb/HT1808

  • My MacBook and my Monitor won't work together anymore

    Ok i have a macbook i got less than a year ago and for the last 2 months i have been running my old samsung monitor off of a mac mini port to VGA and now it won't work anymore when ever i connect it the monitors light just flashes on and off repeatedly but the screen turns black i have tried adjusting the sizing but it wont work...
    I know its connected cause the screen blinks blue and the windows that are set to open on it still do and i have to drag them over to see them

    Try:
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar
    Unless you purchased the optional AppleCare+ extended warranty,
    Apple will exchange your iPod for a refurbished one for $99 for 16 GB 5G and $149 for the other 4Gs. They do not fix yours.
      Apple - iPod Repair price             

Maybe you are looking for

  • FX differences occured in clearing important

    Hi sap gurus, i make clearing for both customer and vendor line items however i can not find any report or customizing to see FX differences by line item basis or customer basis. do you know any table or customizing showing FX differences by customer

  • ORA-12154 Error

    Hi there, I am having a problem connecting to a database that we have just created on a new server. The connection is fine using SQL*PLus, Enterprise Manager or SQL Developer, but we have an application that connects to this database sitting on the s

  • Generate a Report

    hi Friends, i have three table 1- CREATE TABLE "TRANSACTION_DETAILS" ( "S_NO" NUMBER, "BILL_NO" NUMBER, "BILL_DATE" DATE, "PARTY_NAME" VARCHAR2(1000), "VEHICLE_NO" VARCHAR2(20), "ITEM_NAME" VARCHAR2(500), "DESCRIPTION" VARCHAR2(4000), "QTY" NUMBER, "

  • HT4561 Has anyone had trouble updating from 10.6 install discs to the combo 10.6.8 v1.1 using software update?

    I've been having all manner of issues with my system, seemingly out of the blue. I just had a third party install a new HDD for me, and I used my snow leopard install disc (the one I bought many years ago, right after it launched), and when I tried t

  • I can not change the text in enterie page.

    Please help Ruchi Patel | I.T Associate | Amneal Pharmaceuticals | 131 Chambers Brook Road, Branchburg | NJ, 08876| 908.231.1911 x3838 main | 908.231.1044 fax | [email protected]<mailto:[email protected]>