Portege M400 all drivers and recovery XP needed
Hi folks,
I've just bought a Toshiba Portege M 400 without software.
Is there any bundle of all the frivers you need available?
I've tried to search all the several drivers needed, but installng them made my system collapse.
So, does Toshiba not offer a complete software /driver pack for its notebooks?
Regards,
Matthias
Hey,
All drivers and tools you can download from official Toshiba website:
http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
Furthermore you should check the forum a little bit. You will some interesting threads about correct installation order and other useful tips how to get the most out of your notebook.
Similar Messages
-
Since upgrading to Yosemite on my Mac, photoshop cs5 will only print in bw. I can print in color from Word but not photoshop. I have updated all drivers and cs5. Any suggestions would be appreciated. Thank you!
Since upgrading to Yosemite on my Mac, photoshop cs5 will only print in bw. I can print in color from Word but not photoshop. I have updated all drivers and cs5. Any suggestions would be appreciated. Thank you!
-
Upgrading OS...how to reload all drivers and apps?
I am upgrading my P755-S5395 to Windows 7 Professional. I plan to put in a new drive and install the OS from stretch. Instead of downloading, searching and installing each device driver one-by-one, is there a better way to install all the proper device drivers in one shot?
I seem the Recovery process automatically installing all the drivers, but since I am installing a new OS, how do I get Recovery process only to recover device drivers and applications?
Appreciate any pointers.
JimSatellite P755-S5395
I plan to put in a new drive and install the OS from stretch. Instead of downloading, searching and installing each device driver one-by-one, is there a better way to install all the proper device drivers in one shot?
Absolutely, Jim!
Burn recovery media and restore to the new drive. See the sections Creating recovery DVDs/media, which begins on p. 74, and the section Restoring from recovery DVDs/media on p. 76 of the User's Guide.
Satellite/Satellite Pro P700 Series User’s Guide
Then apply Windows Anytime Upgrade, which takes only a few minutes and leaves all the drivers and utilities intact.
Upgrade to another edition of Windows 7 by using Windows Anytime Upgrade
All the versions of Windows are present in Home editions. It's just a matter of unlocking the additional features.
-Jerry -
Picking and moving Portege M400 causes crash and lockup
I have a new problem with Portege M400 that started a few days ago.
If I pick it up or move it then it will crash or lock up. I'm wondering if anyone has any clue as to what may be causing this and what can be done?
My only guess is to replace the hard drive?
Thanks,
GregIt is a short that happens when the lappie is moved due to the hinge no longer being tightly held to the case.
Took the lappie apart this weekend. Had to do both base and screen as the hinge (obviously) goes into both bits.
1 of 2 things solved the problem for me (maybe both):
1 - Taking it apart and putting it back together again - screws all retightened etc so the hinge moves a lot less now.
2- putting some tape around the wires that are rubbed up against when the hinge moves.
There are 5 wires (3 small, round, 2 large and flat) that go through the hinge.
This guide gets you most of the way in:
http://www.irisvista.com/tech/laptops/Toshiba-Portege-M400/take-apart-tablet-pc-1.htm
and
http://www.irisvista.com/tech/laptops/Toshiba-Portege-M400/remove-lcd-screen-digitizer-1.htm
After following the guides there is a little more to do to get into the hinge, but not too much.
All in all took about 4 hours.
Make sure you record which screws came from where - there are quite a few that look very similar but only fit certain holes.
Enjoy and good luck. -
This is a large format printer used for proofs that I cannot use since upgrading to Mountion Lion, anyone else had printer issues?
Checked RoaringApps App Compatibility Table. These are apps not drivers but..
All I see listed is:
- Epson LFP Remote Panel 3.6.1 and with a ? under Mountain Lion
- Epson Printer Utility 4 8.6.1 and red X indicating non-compatibility with Mountain Lion
- Epson Scan 3.7.5 and a green check mark showing compatibility with Mountain Lion
http://roaringapps.com/apps:table/tags/_e/index_tags/_e
On the Epson Website. Under Drivers and Downloads for the Stylus Pro 7700 with Mountain Lion, it looks like there is:
Drivers:
- Printer Driver v8.63
Utilities:
- Remote Panel 2 Utility v1.30
- Uninstall Center v1.1.0
Firmware:
- Firmware Update version KND14BA
Epson Stylus Pro 7700 Printer - Drivers & Downloads
Did you download and install all of these from the Epson website? -
Satellite Z30-A-1E9 Drivers and Sofware Updates needed
Hello Folks!
I accidently installed a Windows V-Touch server on my Pre-installed windows on the Toshiba Ultra Book. I reinstalled the windows but now all of the drivers are missing. Could someone help me out with the drivers, is there any kind of driver management tool. Also I remember there was a Toshiba utility manager from where software was found and updated via that tool not sure if that was the name of the tool but it was in the tray of windows. From where could I download all the drivers and software so my Toshiba machine could work as good as before?
Cheers,
MartinIs there any kind of driver management tool.
On Toshiba notebooks you can find a preinstalled tool called Toshiba Service Station.
This software notifies you about the driver updates…
But all drivers available for this notebook model can be found on the Toshiba EU driver page
http://www.toshiba.eu/innovation/dow...ivers_bios.jsp
Here you should choose:
Notebook
Satellite
Satellite Z series
Satellite Z30-A
PT248E -
K320 Rescue and Recovery Stuck, need help!!!
Hi everybody!!!
My K320 has stuck when i tried to recovery the system. It show the command line window during the process. But nothing then happen.
Link to picture
Thanks in advance for any suggestion!!!
Moderator note; picture(s) totalling >50K converted to link(s) Forum RulesThanks ortegaluis for your reply.
First time i start the rescue and recovery i though it perform some task, then i leave it run and go to sleep (about 7 hours), when i wake up... there is nothing change, still that screen with the command line window.
@ ortegaluis: i did as you said then the computer restart and nothing change. Can you give me another suggestion?
I tried to install new windows by ISO file i downloaded from this link :http://msft-dnl.digitalrivercontent.net/msvista/pub/X15-65733/X15-65733.iso . The setup was smooth but i could not active windows with the product key printed on the computer label. Can someone show me how to active windows with the product key printed on the body computer? -
Satellite Pro A120: Need all drivers and easyguard for Win 7
Hi!
I have a Toshiba Satellite Pro A120, which I purchased back in 2007 and I am very satisfied with it.
It had Windows Vista Business, but recently I installed Windows 7 and this is where my dilemmas began.
My touch pad doesn't work correctly, its scroll feature doesn't work anymore, to be precised. I installed the latest ALPS touch pad driver, but the problem remains.
Then, when I checked the system, I noticed two devices that are listed and it said that there are no drivers installed for them. I cannot find out which devices are those and where to find the drivers.
Here are they:
1st: ACPI\TOS6208\2&DABA3FF&1 Driver not installed!
2nd: ACPI\TOS620A\2&DABA3FF&1 Driver not installed!
And my third problem is regarding Toshiba's sets of programs and utilities.
My laptop came with Toshiba Easyguard, with theft protection and other Toshiba programs, and now I lost them all. Is there any way I can get them?
I have to say that I have no intention of going back to Windows Vista, so any help would be appreciated.
Thank you all for your answers and help!Hi
In my in my humble opinion the additional touchpad features and other devices dont work correctly because the installed drivers are not designed for Win 7 and possibly are not fully compatible with Win 7.
Who knows if the Win 7 drivers would be released for Sat A120 series we will see
At this time I didnt find special Win 7 drivers for A120.
But if found some Win 7 beta drivers on US page:
http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/home.jsp
Maybe you are lucky man and some drivers would run on your A120. -
10.5.7 Upgrade Deleated ALL Drivers and I can't reinstall them!!!
Help!!! I just upgraded my 2007 MacBook to OS X 10.5.7 and It has deleted all my printer drivers, including the ones I had installed from the CD That came with my Canon Pixima MP470. I have tried reinstalling the drivers from the CD three times now, and I still cannot print. What should I do???
Since I have the same problem, I thought I'd jump in. With the new update 10.5.7 on a MacPro I no longer am able to print to my Canon Pixma MP780. When I try to add it to the list of printers, the "add" window shows it on the list, but doesn't stay open long enough to select it.
Steps I've taken:
Repaired permissions with Disk Utility and Disk Warrior; downloaded driver for the printer and reinstalled 3 times; reset print system 2x; even redownloaded the update from Apple website and reinstalled.
Still no change. Again, the add printer window appears with the MP780 on the list, but doesn't allow me to select it and add.
BTW the MP780 is directly connected to the computer. I have one other printer, connected by airport through an iMac in another room that is recognized and does allow printing from my MacPro.
Help, I need this printer for my home office. -
Backup and Recovery advice needed
I have a database which is used for reporting on multiple customers. Data for each customer is provided on a monthly basis. Each montly dataset is stored in its own tablespace.
For example, customer A's data for Jan, Feb, Mar resides in three separate tablespaces:
tblspc_a_2010_01
tblspc_a_2010_02
tblspc_a_2010_03
The same is true for all other customers:
tblspc_x_2010_01
tblspc_x_2010_02
tblspc_x_2010_03
etc.
I care to only retain three months worth of data. With this way of organizing the data, I can simply drop the tablespaces and datafiles I no longer need.
The tablespaces need to be in read/write mode.
Now I'm trying to find the best backup & recovery method for this scenario. I'm thinking about using RMAN to make a compressed backup of each new tablespace as the data arrives, so that in case I need to recover, I can pick and choose which tablespaces to recover. I also want to be able to restore & recover tablespaces to a new database.
I would like some ideas and suggestions on the best way to go about this.
Thanks,
ChristophIs all the data in this coming from other sources? That is, is it just a copy of data that is in other databases?
Assuming "Yes" I would consider breaking it into two pieces:
1. Data which can be easily and quickly refreshed from other sources.
2. Data which cannot be easily refreshed.
Number 1 does not need much in terms of recovery, perhaps a script.
Number 2 could use RMAN either a cold backup if your service level allows, or archivelog and RMAN so its always available.
I had a similar issue a while back and since all my data comes from other databases I wrote a complete refresh script. The script takes awhile to write but its in portable making recovery less of an issue. I run a full data pump nightly for an extra option. My script refresh 1 table at a time following this format:
1. Drop the table
2. Recreate the table
3. Add indexes
4. Add grants
5. Create or replace synonyms
next table.
Another advantage is you can refresh any table at a moments notice, the reporting tables have far fewer columns than the production version to save space. -
Portege M400: Slimline battery and portfolio case - what's best?
Hi, I can't seem to find a slimline battery (to fit where DVD player is once it's taken out) for the M400 or a nice (leather?!) portfolio sytle case (i.e. a case to provide some protection and allow me to use the PC in laptop or tablet mode without taking the case off).
Can anyone provide me with links or whatever to buy a slimline battery and/or case?
Many thanks,
Tony.Hi
I have found info that those batteries are compatible with your unit:
Battery Pack PA3191U-5BAS
PA3191U-5BRS
Slice Expansion Battery PA3510U-1BAL
PA3510U-1BRL
Please check those part numbers and you will find a right answer. You can order it by Toshiba service partners. The addresses and phone numbers you can find under http://www.csd.toshiba.com/cgi-bin/tais/su/su_gaspLocator.jsp?pf=true
Good luck! -
it normaly last about 3 days for me but now it just randomly says its completely out of power within an hour or so of charging it even if i dont do anything.
Sounds like the batter is on its last legs. I would make an appointmernt ant the Genius Bar of an Apple store. However, first try the following to rule out a softwre problem:
- Reset:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Restore the iPod from backup
- Reset the iPod to factory defaults/new iPod -
Last 4 times I've upgraded FF, I seem to lose more than I gain.... and today I reloaded version 4 only to discover the losses and frustrations remain. Anybody for Chr*m*?
Last 4 times I've upgraded FF, I seem to lose more than I gain.... and today I reloaded version 4 only to discover the losses and frustrations remain. Anybody for Chr*m*?
-
Radeon HD 5770 graphics card works perfectly with my MAC Pro 1,1 and Adobe CS6. However, I upgraded to Adobe CC and Photoshop CC disabled some filters and 3D functionality. The preference panel for Performance/Graphics Card in Photoshop CC is greyed out and inaccessible and shows this message -
"Photoshop detected an error in your display driver. Update or reinstall the driver and check Use Graphics Processor to retry."
I still have Photoshop CS6 installed and it still works perfectly. Anyone else with this issue? Is there a driver update for this compatable with my setup?
OS 10.7.5
Mac Pro 1,1
20gb ram
ATI Radeon HD 5770 Graphics Card
30" Apple Cinema HD displayafter going round with this Adobe was able to find the fix....opened the "show content" folder for the application Photoshop CC (control click on the application folder) and navigate to the sniffer file and rename it by putting a tilda ~ in front of the name..." ~sniffer ", close and open PhotoshopCC...and voila, problem solved... Thankyou Adobe support
-
My set up is Imac + Ipad1 + canon MG8250 printer. Wireless network. airprint in use and functions fine with the Imac. The Ipad initiates printing ok but always faults out with the error 'Printer out of paper' because it tries to use the rear paper tray (special paper ) instead of the paper drawer.
Johnmac@47-
Could the iMac have printed something that required use of the rear tray? That might have reset the printer's default. Look in the printer manual to see if it has a setting to change the default paper tray. (Note that the iMac does not use AirPrint, it uses the printer's native printing language.)
Your problem may be a flaw in the Canon AirPrint implementation. I suggest you report it to Apple at <iPad Feedback>, as well as to Canon. There may be a simple correction that can be made to either the next iOS update or to the Canon printer firmware.
Fred
Maybe you are looking for
-
Join us at 1:00pm Pacific time for a LIVE video tutorial of how to replace a video card and configure video settings! The video features HP experts who work with the products every day! I am an HP employee.
-
Hello, I am new to Indesign and trying to create a documents with a few photos in them. When I photoshop my image in photoshop the image will look fine but when i place it in Indesign it is blurry and choppy. I have checked my setting and everything
-
The Submitter form cannot be validated if I don't fill the fields for each member of team (3). is it means that a team less than 3 persons cannot participate ??
-
Error message / code 50 during installation.
I try to update the Creative Cloud Desktop Version. At 44% download or progress I receive the error code 50 all the time. Had the same problem at the initial installation. After 2 day trying (and what ever) I was able to install. Quite disturbing the
-
Previously when renting a movie I have been able to view it multiple times within the 48 hours, now it seems to disappear after the first viewing, does anyone know why?