Portege M750 - Change from 32-bit to 64-bit

I have just purchased a Portege M750 laptop which came preinstalled with Vista Business 32bit and seperate XP tablet on a recovery disc.
I am looking to resinstall with 64bit Vista business, then install the XP as part of a dual boot system to take full advantage of the 4GB already installed and further memory expansion in the future.
My question is this: Although the Toshiba drivers download page does not specifically list a Vista 64 bit OS, has anyone carried out a similar OS change on a portege/or different laptop and had any incompatabilty with the 32bit drivers and applications? If so, which drivers/features were problematic afterwards.
Does the "Toshiba" folder in the C:\ directory of laptop contain all the drivers and setup files required or would these all have to be downloaded from the website.
Thanks

Thanks for your replies.
I had called Toshiba UK and was told pretty much the same thing. They don't support 64bit and they didn't believe the 32bit drivers would work.
After a search on the internet, I came across a forum for tablet PC's, http://forum.tabletpcreview.com/ and found that although Toshiba europe doesn't support 64bit operating systems, Toshiba america does. www.toshiba.com. They also fully support all other Toshiba laptops and all windows operating systems in case anyone is needing drivers for Windows 7 or XP 64 bit.
I downloaded all of the drivers and applications from there and only had one or two conflicts afterwards with things not working. Most of these were sorted by going to manufactuers website. Webcam seems to be the only thing not working now but it might just need a full reinstallation of all the webcam driver/application software to fix...haven't quite had time to look at it yet.
I am surprised however that there isn't continuity with Toshiba offering the same driver/machine support across all the world regions. It's maybe something they'd look at sorting out in the future.
Anyways...off now to enjoy my new laptop.

Similar Messages

I want to install my photoshop 5.0 limited edition but the pc displays i should check if it is a 32 or 64 bit application. i changed my windows os from xp to win7 64 bit (i think that is the problem) how can i run my photoshop on this system?

i want to install my photoshop 5.0 limited edition but the pc displays i should check if it is a 32 or 64 bit application. i changed my windows os from xp to win7 64 bit (i think that is the problem) how can i install and run my photoshop 5.0 le on this system?

Kglad Creative Suite 2 is only applicable to individuals affected by the activation server shut down. A complete list of affected software titles can be found at Activation server shut down for Creative Suite 2, Acrobat 7, and Macromedia products.

IMAQdx Grab changing my images from 16 bit to 8 bit?

I have a labview application that I am trying to use with 16 bit images. It is currently running and working with 8 bit images. I though that if I changed the image type from 8 bit to 16 bit and changed the settings on my camera from 8 bit to 1 using MAX that the program would run the same but with 16 bit images instead. However, even when I do this the camera only captures 8 bit images and then the application fails because of an incompatible image type error because all the settings are set to 16 bit images. I set a few probes and realized that very early in my application all my images are 8 bit even when the camera is set to a 16 bit setting. Also the resolution of my images is different than what the camera is set to. I think that the culprit is IMAQdx Grab because I was reading in the help that if the image type does not match the video format of the camera then IMAQdx Grab changes the image type to a suitable format. How can I make it so IMAQdx Grab wont change the image type? I am fairly new with LabView so this might be something simple or not. Thank you.

Hi Optical Intern,
It sound to me that you are having problems with getting the camera file to do what you want. My guess is that you are not saving the attributes in Measurement and Automation (MAX) when you change them. If you are saving them then I would try and set the attributes programmatically in your VI. This should force it to what you want within the program. Let me know how it goes.
Adam H
National Instruments
Applications Engineer

Is my Adobe CC for photographers license still valid if I change from Windows 32 bit to 64 bit?

I've bought a license for Adobe CC for photographers (costs 10$ a month), and now going to upgrading my operating system from Windows 7 32 bit to 64 bit. I know that there is a 64 bit version for Photoshop, don't know about Bridge. So, is my license still valid if I upgrade, or do I have to buy a new CC program for photographers for the 64 bit version of Photoshop??
TIA

Good to know information :
You can install and activate Creative Cloud subscription Apps on 2 computers. (Either on Mac or Windows as per your choice) .
Either it may be 32 bit or 64 bit , it does not matters, the subscription will be counted based of number of activation done as per Machine ID's.
Before , you upgrade the computer to 64 bit, better to Sign out from Creative Cloud desktop application.
If the Machine ID changes just in case , it will be counted as 2'nd activation.
Sign in, Sign out | Creative Cloud desktop app
Even though, if you had exceeded Maximum activation limit(Already activated on 2 computers) , still you can reset the activation count to Zero, so that you can again activate CC subscription on any of 2 computers as per your choice.

Changing from 64 bit to 32 bit

How can I change my Vista from 64 bit to 32 bit so I can use Adobe flash player?

Here is the place to start for flash player support:
http://www.adobe.com/support/flashplayer/
Best,
Michelle

How to change Macbook pro MD101Hn/a from 32 bit to 64 bit?

How to change Macbook pro MD101Hn/a from 32 bit to 64 bit?
Adobe softwares needs 64bit softwares to install and access........

Please read this:
http://support.apple.com/kb/ht3696
Ciao.

HT3696 How its' possible to change from 32 bit to 64 bit Processor for MacMini?

How its' possible to change from 32 bit to 64 bit Processor for MacMini? Mini?

You probably have a Core Solo or Core Duo model. You can upgrade the CPU to a 64-bit Core 2 Duo in the T7200-T7600 family.
iFixit and OWC provide easy-to-follow, step-by-step guides. It's a delicate procedure, but not overly difficult. I'm all thumbs, and I have done it twice.
Cheers!

Satellite C660 - How to change from 32 bit to 64 bit operating system?

Can some one please tell me how to change from a 32 bit to a 64 bit operating system for my Toshiba Satellite C660 Notebook?
No cds came with my notebook so I can't restore.
I installed the 32 bit when setting up by mistake and would now like to change.
Thanks in advance

>No cds came with my notebook so I can't restore.
In user manual you could find a info that recovery disk needs to be created using preinstalled software called Toshiba Recovery Media (disk) Creator
>I installed the 32 bit when setting up by mistake and would now like to change.
The Toshiba image of some notebook models contains the Win 7 32bit and 64bit system.
Not sure if your image supports both versions so cannot say for sure if you would be able to switch to 64bit but try this:
http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm
During HDD recovery procedure you should be asked what version you want to chooseof course if both versions would be available so check thisotherwise you will need to purchase an 64bit version.

How to change from 32 bit to 64 bit

I downloaded Slingplayer and they suggested to change to Firefox and then change from 32 bts to 64 for better performance for watching movies on dishonline

>No cds came with my notebook so I can't restore.
In user manual you could find a info that recovery disk needs to be created using preinstalled software called Toshiba Recovery Media (disk) Creator
>I installed the 32 bit when setting up by mistake and would now like to change.
The Toshiba image of some notebook models contains the Win 7 32bit and 64bit system.
Not sure if your image supports both versions so cannot say for sure if you would be able to switch to 64bit but try this:
http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm
During HDD recovery procedure you should be asked what version you want to chooseof course if both versions would be available so check thisotherwise you will need to purchase an 64bit version.

Changed from 32 to 64 bit pc

I have changed from 32 bit pc to 64 bit and can't open my previous catalogue, I get an error message saying catalogue might be open and used with another programme (which it isn't) or I might need permissions..............any Idea's.

Look in the folder alongside your catalogue. If there is a file named <catalogue name>.lock, delete that file and try again to run LR.
Hal

Changing from 32bit to 64 bit Creative Cloud version

Since 3 month I have a licence for Photoshop ceative cloud. No I decided to change from 32bit Labtop to 64bit Labtop because to be faster for the adobe applications.
How can I install the new 64 bit version on the new Labtop with the existing licence agreement?
Best regards
Egon

The same may which you have installed on your 32 bit computer.
Creative Cloud desktop will detect and install the correct version on your computer.
You can download the products from
Explore Adobe desktop apps | Adobe Creative Cloud

"Invalid Binary" error on app. Apple's reason is "Missing 64-bit support" due to changes from Feb 1st 2015

Hello
Can anyone help me with an "Invalid Binary" error on my app.
Apple's response is:
Dear developer,
We have discovered one or more issues with your recent submission for "DPS Notes". To process your submission, the following issues must be corrected:
Missing 64-bit support - Beginning on February 1, 2015 new iOS apps submitted to the App Store must include 64-bit support and be built with the iOS 8 SDK. Beginning June 1, 2015 app updates will also need to follow the same requirements. To enable 64-bit in your project, we recommend using the default Xcode build setting of “Standard architectures” to build a single binary with both 32-bit and 64-bit code.
Once these issues have been corrected, use Xcode or Application Loader to upload a new binary to iTunes Connect. Choose the new binary on the app’s Details page in My Apps on iTunes Connect, and click Submit for Review.
Regards,
The App Store team
Can someone from the Adobe DPS team let me know how I can recreate the .ipa file so that it will meet Apple's requirements.
They seem to have moved the goalposts since I created the original .ipa file in December. I thought I'd submitted it, just went back through iTunes Connect to check info as I hadn't heard anything from them, then hit this brick wall. Any help offered would be much appreciated.
Thanks
Rebecca

Hi
I've Updated App Builder, gone back to the DPS App Builder portal, regenerated new zip and ipa files and downloaded them.
I clicked the Application Loader 3.0 link, downloaded the latest Appication Version, clicked on the "Deliver your App" button, and submitted the newly built App that was built using 32.4.2 version. (All the app icons were listed as "stored on server" so I presume they are all ok). The .zip file appeared to 'deliver' to Apple successfully. I've tried to resubmit it but get ta "Redundant Binary Upload. There already exists a binary upload with build version..." error message, so presume the orginal binary upload was successful. I have no idea how I can get this app from the "prepare for submission", to "in review". The last time I thought I'd submitted this app I got as far as the "waiting for review" status, and no further.
At the moment I don't have a"+" button in the Build section - as mentioned on page 66 of Adobe's Step_by_step_guide_to_dps_se.pdf.
So I can't add the new .zip file to the iTunes Connect > My Apps portal in the Build section of the Versions tab.
I have put a support email into Apple, but don't expect a reply any day soon.
The problem with starting all the way back through the App wizard is that I really want to use all the same App Name, Bundle ID, and details etc.
Do you mean, going back to the Folio Producer Panel, and building a whole new App?
This process certainly isn't for the faint-hearted!
HELP!

T61p with Windows XP - how to change this from 32 bit to 64 bit?

I am in urgent need to have my T61p converted from 32 bit to 64 bit. I am currently using windows xp professional 2002 sp2. Would someone let me know how to do this? Thanks a million. Carlee

Hi there,
Well, if you have Windows XP 64, then it's a matter of making a choice of running both side-by-side or dumping one for the other. If you don't have 64-bit, then you'll need to procure yourself the 64-bit version of the OS. It's not a matter of simply "activating" something, or installing a patch of some sort.
The 64-bit version uses a different set of core files that are incompatible with the 32-bit XP altogether, it's not a simple upgrade as all the drivers will require re-installation as well (applies not only to the OS, but to all peripherals that you have as well).
Hope this helps

Change from 32 bit to 64 bit - Linux

Hi All,
Does anyone could help me to find any info about change my Solution Manager/Oracle 9 32 bit to 64 bit?
I looked in Service Marketplace but didn´t find any info ...
thanks a lot!!
Daniela

Check notes 940811, 192822
then this thread:
32 bit to 64 bit upgrade

Upgrading Solaris 10 from 32-bit to 64-bit in a VirtualBox VM

Hello,
I am running 32-bit Sol 10 u5 x86 as a guest in a Sun VirtualBox (Vbox) virtual machine on a 32-bit WinXP host with 64-bit VT-capable Xeon processors, and am considering upgrading Solaris 10 to 64-bit using the latest version of Vbox (2.0.0). After installing WinXP Professional x64 and the 64-bit version of Vbox, will I have to completely re-install Sol 10 to get it to run in 64-bit, or is there some way to get it to 64-bit without a re-install? The Vbox forums suggested that I post this question on a Solaris forum, as they don't know the answer.
They apparently also do not know if Windows XP x64 is a compatible host OS on which to run 64-bit guests. They list only Vista, Linux, and OpenSolaris as supported 64-bit host OSs. Has anyone used WinXP x64 as a host for Vbox 64-bit guests? Due to policy, Vista is not available to me on my system/network.
Thank you...

The x86 installer will place both 32-bit and 64-bit code on the disk.
The loader fired by GRUB will attempt to detect the proper hardware and launch the correct kernel.
Other portions of the upgrade could conceivably cause a problem, but having the CPUs go from 32-bit only to 64-bit capable shouldn't be an issue. You don't have to make any changes.
Darren

Portege M750 - Change from 32-bit to 64-bit

Similar Messages

Maybe you are looking for