Portege M750 - PCI controller software not installed on Windows 7 64bit
Hi, had an upgraded SSD for my machine so decided to do a fresh install of Windows 7 64bit and now I have and error saying PCI controller software is not installed, tried windows update no luck - any ideas please?
Thanks, Peter
OK cool advice - thanks it is from Intel and is
0x2A44 Chip Number: Mobile 4 Series Chipset
Chip Description: Intel Management Engine Interface
Notes: ftp://ftp.vaio-link.com/PUB/VAIO/ORIGINAL/ME DRIVER INTEL 4.0A _ 4.0.0.1105.ZIP
Downloaded, installed and working - thanks for the quick advice!
Peter
Similar Messages
-
Ethernet controller driver not installing after Windows Server 2008 installation on Cisco UCS blade
I am using MDT 2010 to deploy Windows Server 2008 to a Cisco UCS B200 blade. The OS and hotfixes install with no problem. The system reboots and attempts to connect to the deployment share to continue with the task sequence and I receive an error stating
"A connection to the deployment share could not be made. The following networking device did not have a driver installed. PCI\VEN_1137&DEV_0043&SUBSYS_00481137&REV_A2"
The driver in question is the driver for the Ethernet controller for the UCS blade. More specifically, it is the network driver for the Palo card in the UCS Chassis. When I Ignore or Abort the install, I am able to manually install the driver and restart the
task sequence. The build then completes successfully with no further issue. I just cannot seem to automate the driver install. Has anyone dealt with this type of issue?Vik and stealthfield - thank you for your responses.
I was preparing a script to manually move the driver into the c:\windows\inf location when I had to stop to create a new task sequence for a different build. It was while building this task sequence that I found the soulution to the problem.
In the Post Install -> Inject Drivers step of the Task Sequence, I noticed that it was executing a command of type "Inject Drivers" with a selection profile of "All Drivers" and "Install only matching drivers
from the selection profile" selected.
I changed this to run a command of type "Run Command Line" and specified that it execute "%Scriptroot%\ZTIdrivers.wsf". I noticed that this was selected in one of my other builds that was working properly, so I thought I'd
give it a try. - IT WORKED.
So to sum up, the solution was to change the type of command being executed in the "Post Install -> Inject Drivers" step of the task sequence. After this change, the machine came up and continued the task sequence with no further issues.
Thanks again for the responses - They were helpful and I do appreciate it. -
Pci data acquisition and signal processing controller -Device software not installed
My pc shows me ,the driver software for pci data acquisition and signal processing controller is not installed on my Device manager.
Please suggest me a suitable solution.No its not working , Give me an alternate solution.
-
I tried to install in my Sony Vaio Laptop - Model Name SVF15218SGW Serial No 54****************954. After installation of itunes, when i am trying to connect error message is showing as follows -
"This iphone cannot be used because the required software not installed. Run the itunes installer to remove the itunes, then install the 64bit version of itunes".
i already installed 64bit version. but not connecting my iphone with itunes
PLEASE HELP.!!!!
<Personal Information Edited by Host>Hello Negaz
When you uninstalled iTunes, did you uninstall it by using the article below or just uninstalled iTunes? The best practice is to remove not only iTunes, but also other associating software in the order that the first article give. If that does not work, then check out the second article for more troubleshooting options for connecting your iPhone to your computer.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/ht1923
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Regards,
-Norm G. -
Satellite C660d-14G: network controller is not installed
Hi.
I installed windows 7 on my toshiba,
I have problem with the wireless driver.
I downloaded all availible drivers on the site, but there is no change.
In the device manager write that the network controller is not installed.Hi
> network controller is not installed.
Network controller could be Lan card or Wlan card.
Are you sure that you need to install the Wlan driver?
As far as I know the notebook has been equipped with the Atheros AR9285 802.11bgn Wlan card.
The LAN card is 10/100 Base-TX Realtek 8105E-GR
By the way: The latest Wlan drivers can be downloaded here:
http://aps2.toshiba-tro.de/wlan/?page=downloads -
Hi!
I tried to install SAP NetWeaver 7.1 with Oracle 10 under Windows Server 2003 64bit in english fully updated. But I ran into two problems which prevented the SAP installation to finish : first once all the oracles updates were installed, the oracle wintows service would not start; second sapinst never managed to find the oracle installation and always answered "Oracle Software not installed".
For this installation I downloaded all the installation files from the SAP download center like this :
- On http://service.sap.com/swdc in the left frame : download/installation and upgrades/entry by application group
- then in the center frame : SAP NetWeaver/SAP NetWeaver/SAP NETWEAVER CE 7.1/Installation/Windows Server/Oracle/
- I added everything to the Download basket but "Oracle 10.2.0.2.0 Patch for AIX 64bit" and "Oracle 10.2.0.2.0 Patch for Solaris 64bit"
- then I took the last patch for Oracle 10 on the SAP download center :
- on http://service.sap.com/swcenter-3pmain in the left frame : Oracle/Oracle 64-bit/Oracle 10.2.0 64bit/Oracle 10.2.0.2/NT_x86_64
- I added the last patch to the download basket
Then I followed this installation steps :
installation of the last jdk : jdk-6u3-windows-i586-p.exe
installation of Oracle 10.2.0.1 with : Oracle10.2.0.1-51031678\NT\I386\sapserver.cmd
installation of the last update for oracle 10.2.0.2 with : DVD_ORACLE_10.2.0.2_Patches_WIN_AIX_SOL\NT\I386\setup.exe
=> I had a problem with the installation of the patch chich detected the wrong version of windows so I forced it with : OPATCH_PLATFORM_ID=233 (I checked it before, it should really be the right one)
installation of the last patch of oracle :
- definition of ORACLE_HOME and addition of opatch to the PATH
- execution of "opatch apply" in the folder Oracle-10202_Patch16_MSWINX86-64-6397030\
===> *PB* : the installation of this patch enables the oracle windows service which won't run and doesn't send any errors (just timeout). I didn't find any help on this one. When I tried to start sqlplus in console, I got errors about DLLs not found but they exists in the bin directory of oracle and are in the PATH...
installation of NetWeaver 7.1 with SAP NetWeaver CE 7.1 SP3 for Oracle - 51032969\DATA_UNITS\CE71_03_IM_WIN_X86_64_ORA\sapinst.exe
- normal installation + JavaEE + CompEnv
- Media Browser - RDBMS Client Oracle : Oracle 10.2 Client - 51033272\OCL_WINDOWS_I386\LABEL.ASC
===> *PB* : at this point of the sap installation, I got an error "Oracle Software not installed" without any details. I didn't find any help on that either. It seems to come from a registry key missing...
After that, I uninstalled (with removal of the right keys in the registry to have something clean (<a href="http://download.oracle.com/docs/cd/B19306_01/install.102/b14316/deinstall.htm">url</a>)) Oracle many times and tried different installation steps : without the patches, with the patches but without the update (doesn't work), with the patch 15, with the patch 16. In each cases Oracle service wasn't working if a patch was installed. And in each cases the sap installation never detected an Oracle installation. This installation steps are very reproductibles and are problemful.
Could anybody have some pointers or help on that one ?
Thanks in advance,
FlorianHello Friends,
I tried the AMD64 based Installation Source to install Oracle 10g. and It works.
I also applied sufficient patches (AMD64/x86_64 based) to Oracle, as required. It worked fine, without giving that "Platform not compatible" error, as it was giving me before.
Now,I have got that , my machine was expecting x86_64 based Installation of Oracle .
I was little bit confused between x86, x64, x84_64, I386,etc..etc..terms...
Thanks to Markus and other friends.
The problem was due to mix installation of 32bit + 64bit Oracle Software & Patches. Previously, i installed i386 based Oracle, which is 32 bit version. Then i tried AMD64 based Installation source of Oracle RDBMS. It workes.
Previously, I was applying x86_64 based Oracle patches 16 & 17 on 32-bit Oracle version, thats why definitely it was giving error of "Platform not compatible", because it was expecting 64Bit Oracle version to implement that patch.
But, now, i successfully applied these two required Oracle 10.0.2.0 patches(16 & 17),on this 64Bit Oracle. (AMD64 based Installation source).
Then, I had run SAPInst of Installation Master (Win_x86_64) and started the Installation again. I also gave Oracle RDBMS Client Source location (x86_64 based). Then, also provided other required parameters. Now, the SAPInst worked fine, without that "Oracle Software not Installed" error.
And, Ultimately I successfully installed the SAP NetWeaver CE 7.1 on 64Bit Oracle 10g Database Software. Right now, the Server is working fine, without Errors.
Thanks Again..... -
WAE 674 Disk based software not installed.
Hi,
Have an WAE 674 with 4.4.3c installed, with problem.
Using WCCP and I am able to logon to the device.
Have this msg and in in the CM it is down.
System Initialization Finished.
Disk based software not installed.
Some applications may not run correctly!
Any sugestion?
I have reload still problem.
Regards Jan RockstedtWhat steps did you take to resolve the issue? I have the same issue on WAVE 594 running 4.4.5.
I get the error message when I telnet into device. -
software not installed correctly to communicate with ipod/iphone. please install again
Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.) -
Software not installed correctly to communicate with ipod -Tryed evrything
Hello i am geting the "Software not installed correctly to communicate with ipod" error. I tryed everything on http://docs.info.apple.com/article.html?artnum=93716 nothing worked. I need help for a fix. I was having error 2095 before then i fixed it. Now im having this problem
Ipod: 30 gig video
Computer: HP a1112nItunes ver: 6.0.2.23
that rules out one set of possibilities.
okay, we'd better check on the following two possibilities then. (the second one has shown up in itunes 6.0.0.18, 6.0.1.3 and 6.0.4.2, so it's a live possibility with a 6.0.2.23.)
The Tick 247: iTunes not recognizing your nano? Here's a possible solution!
markinmadison: Re: "The software required for communicating with the iPod is not installed..."
love, b -
Ipod software not installed itunes
when i run itunes i get the error message software not installed...
I can't seem to find the answer to this problem however i remember two posts that solved it
one told how to remove tunes thuroughly
the other used Start..Run to close a few things that itunes and the ipod used.
I need an answer and am onedering if anybody could find one of these two posts or give me an answer of their ownIts ok i found it
-
Hp officejet 6100 eprinter will not install on windows 7 64bit
I've tried everything. Cannot install software for brand new hp officejet 6100 eprinter. No using disc, not wireless, not usb, not downloading software not troubleshooting in windows nothing what so ever. It's been weeks and weeks, just can not use this printer in anyway on HP Pavilion dv7-3060us Entertainment Notebook PC
Serial Number: [edited by Moderator]
Product Number: VM237UA
Can't attach screen print of error messages here.
install does not finish: A fatal error occurred preventing product use. Click "Cancel" to cancel install.
MSIExec command: /i "C:"\HP_ePrint\Setup\Core\SIPM_64\HpTcpMon65.msi"/qn REBOOT=ReallySuppress
Path: <empty>
Return code: 1603
Troubleshooting HP printer software installation
We are sorry that our printer software encountered an error while installing.
Your printer software did not install successfully. You may have seen an error similar to one of the following:
"Device setup failed to complete"
"Unknown device"
A red X displays after connecting the USB cable
On the following screens, you will find troubleshooting solutions that our support agents have found to be the most helpful to resolve install errors. If the first solution does not solve the problem, continue trying the remaining solutions until the issue is resolved. Also, this troubleshooter includes buttons to make certain steps easier. If a button doesn't work or you would like to do the steps yourself, you can view the manual steps by expanding the hidden text below any button.
To begin troubleshooting, click Begin USB Troubleshooting, below.
Uninstall the HP software, run Microsoft Fix it, disable startup services, and reinstall the software
This solution consists of multiple steps. Make sure you complete each step before continuing to the next one.
Uninstall the HP software
Even if the HP software installation failed, some components might have partially installed on your computer. Follow these steps to remove them.
Disconnect the USB cable from both your printer and computer (if it is currently connected).
Click here to open the list of currently installed programs.
+ Button didn't work? Click here for instructions.
Point to or tap the upper-right corner of the screen to open the Charms bar, and then click or tap the Search icon.
Type control panel in the Search (Windows 8.1) or Search Apps (Windows 8) box.
Click or tap the Control Panel icon.
The Control Panel window opens.
Under Programs, click Uninstall a program.
On the taskbar, click the Windows icon, and then click Control Panel.
The Control Panel window opens.
Under Programs, click Uninstall a program.
On the taskbar, click Start, and then click Control Panel.
The Control Panel window opens.
Double-click Add or Remove Programs.
In the list of installed programs, click your HP printer name, and then click UninstallChange/Remove.
Follow the onscreen instructions to complete the software removal.
Caution
If the uninstaller asks you to remove shared files, click No. Other programs that use these files might not work if you delete the files.
You may be prompted to restart your computer.
Note
After the restart, this troubleshooter will open and return to this page automatically.
Click Next Step below to continue with the next step in the solution.
Uninstall the HP software, run Microsoft Fix it, disable startup services, and reinstall the software Run the Microsoft Fix it troubleshooter to reset the registry entries
Sometimes the uninstall does not completely remove the software. Microsoft provides an automated fix for this problem on their web site. Follow these instructions.
Click here to open the Microsoft support solution:
If you like, review the information on the Microsoft web page.
We recommend that you click Run now in the Microsoft Fix it section to fix the problem.
Follow the onscreen instructions in the Microsoft wizard:
On the Are you having a problem installing or uninstalling a program? screen, click Uninstalling.
On the Select the program you want to uninstall screen, scroll through the list of programs and choose the entry for your HP printer series, and then click Next.
When the Microsoft wizard completes, you will be prompted to restart your computer. Click Yes to restart.
Note
After the restart, this troubleshooter should open and return to this page automatically. If it does not open by itself, open it manually after the restart.
Click Next Step below to continue.
Uninstall the HP software, run Microsoft Fix it, disable startup services, and reinstall the software Disable startup services
Windows allows many programs and processes to run immediately upon startup. These programs may be preventing you from installing the HP software. These directions explain how to disable these programs and processes temporarily so that you can install the printer software.
Click here to open the System Configuration Utility dialog box. (It may take up to a minute for this to open.)
+ Button didn't work? Click here for instructions.
Point to or tap the upper-right corner of the screen to open the Charms bar, and then click or tap the Search icon.
Type msconfig in the Search Apps box.
Click or tap msconfig.
On the taskbar, click the Windows icon.
Type msconfig in the Search programs and files dialog box, and then press Enter.
On the taskbar, click the Windows icon, and then click Run.
Type msconfig in the Run dialog box, and then click OK.
On the taskbar, click Start, and then click Run.
Type msconfig in the Run dialog box, and then click OK.
Check to see if Normal Startup or Selective Startup is currently selected. If Normal Startup is selected, follow the indicated steps, below. If Selective Startup is selected, follow those steps instead.
Note
Follow the appropriate instructions for your startup type. You only need to follow one set of instructions, not both.
To disable a Normal Startup
To disable a Selective Startup
Select Selective Startup, and then clear the Load Startup Items check box.
Click the Services tab, and then select the Hide All Microsoft Services check box at the bottom of the screen.
Click Disable All.
Click the Startup tab, click Open Task Manager, and make a list of the items that are selected.
You will need this list to reset your computer startup items later.
Click the General tab, and then clear the Load Startup Items check box.
Click the Services tab, and then select the Hide All Microsoft Services check box at the bottom of the screen.
Make a list of the items that are selected.
You will need this list to reset your computer startup items later.
Click Disable All.
Click Apply, and then click OKClose.
A new window displays. Click Restart to continue.
Note
After the restart, this troubleshooter will open and return to this page automatically.
Upon restarting your computer, the System Configuration Utility window may display. If it does, select the Don't show this message... check box, and then click OK.
Click Next Step below to continue with the next step in the solution.
Uninstall the HP software, run Microsoft Fix it, disable startup services, and reinstall the software Reinstall the HP software
Now that your system is updated, try installing the HP software again.
Turn your printer on.
If you are using a USB connection, disconnect the USB cable from both your printer and computer (if it is currently connected).
Reinstall the software using the CD that came with the printer, or download and install the latest version of the software for your printer from the HP web site (recommended):
Click here to go to the HP Printer Install Wizard download page.
Follow the directions to download and run the HP Printer Install Wizard.
Follow the onscreen instructions to download the printer software for your version of Windows.
The HP Printer Install Wizard downloads and starts the software installation.
Note
A full Windows 8 or Windows 8.1 printer software install may not be available for all products. Click here to find out if a Windows 8 or Windows 8.1 download is available for your printer.
Follow the onscreen instructions, making sure to proceed all the way through the installation without canceling or exiting any screen.
Note
Do not connect the USB cable until you are prompted, or an install error may occur. Also, if your software is still not finding your printer over the USB connection, review the following USB tips.
+ USB tips
Ensure that your USB cable is no more than 5 meters (16.4 feet) in length. (For best results, use a cable that is less than 2 meters (6 feet) in length.)
Try connecting the USB cable to a different USB connector on the computer. (For example, if you plugged the cable into a front USB port, try plugging it into a port in the back.)
If the USB cable is connected to a USB hub or a docking station for a laptop, it could cause the installation to fail. Even if you believe that your USB hub works fine, try connecting the USB cable directly to the computer during the device installation (when prompted). You can always move it back to the USB hub later.
If you need to use a USB hub, use one that is externally powered instead of using a non-powered hub.
When the installation completes, try using your printer.
Turn your printer on.
If you are using a USB connection, disconnect the USB cable from both your printer and computer (if it is currently connected).
Reinstall the software using the CD that came with the printer, or download and install the latest version of the software for your printer from the HP web site (recommended):
Click here to go to the HP Support & Drivers web page.
Select the option to download drivers and software, and then type the name of your printer in the search box.
For example, type HP Photosmart B211.
Follow the prompts and make selections to display the software and drivers for your printer.
When prompted, select the appropriate version of Windows, to view the driver download and CD ordering options.
Tip
If you're not sure whether your operating system is 32-bit or 64-bit, click the Is the Windows version on my computer 32-bit or 64-bit? link on the page for help.
If given a choice, select the full feature software and drivers link.
This option may appear in an area labeled Drivers.
When prompted, click Save, and download the software to your desktop or a folder where you can easily find it.
Start the HP software installation by running the install program that you downloaded.
Follow the onscreen instructions, making sure to proceed all the way through the installation without canceling or exiting any screen.
Note
Some printer models require a USB connection during the install. If you are prompted by the software, connect the USB cable. Do not connect the USB cable until you are prompted, or an install error may occur. Also, if your software is still not finding your printer over the USB connection, review the following tips.
+ USB tips
Ensure that your USB cable is no more than 5 meters (16.4 feet) in length. (For best results, use a cable that is less than 2 meters (6 feet) in length.)
Try connecting the USB cable to a different USB connector on the computer. (For example, if you plugged the cable into a front USB port, try plugging it into a port in the back.)
If the USB cable is connected to a USB hub or a docking station for a laptop, it could cause the installation to fail. Even if you believe that your USB hub works fine, try connecting the USB cable directly to the computer during the device installation (when prompted). You can always move it back to the USB hub later.
If you need to use a USB hub, use one that is externally powered instead of using a non-powered hub.
When the installation completes, try using your printer.
Whether or not you installed the software successfully, make sure you follow the instructions in the next step to enable your startup software, or your computer may not function in the way you expect. Click here or click Next Step below to continue.
Uninstall the HP software, run Microsoft Fix it, disable startup services, and reinstall the software Enable startup services
If you disabled startup services earlier, make sure you follow these steps to enable them again or your computer may not function in the way you expect.
Click here to open the System Configuration Utility dialog box. (It may take up to a minute for this to open.)
+ Button didn't work? Click here for instructions.
Point to or tap the upper-right corner of the screen to open the Charms bar, and then click or tap the Search icon.
Type msconfig in the Search Apps box.
Click or tap msconfig.
On the taskbar, click the Windows icon.
Type msconfig in the Search programs and files dialog box, and then press Enter.
On the taskbar, click the Windows icon, and then click Run.
Type msconfig in the Run dialog box, and then click OK.
On the taskbar, click Start, and then click Run.
Type msconfig in the Run dialog box, and then click OK.
If you disabled a Normal Startup, follow the indicated steps, below. If you disabled a Selective Startup, follow those steps instead.
Note
Follow the appropriate instructions for your startup type. You only need to follow one set of instructions, not both.
To enable a Normal Startup
To enable a Selective Startup
Select Normal Startup.
Click the Startup tab, click Open Task Manager, and then selectenable every item from the list you made in a previous step.
Click the Services tab, and then select the Hide All Microsoft Services check box at the bottom of the screen.
On the Services tab, select every item from the list you made in step A.
Click Apply, and then click OKClose.
A new window displays, prompting you to restart.
Note
After the restart, this troubleshooter should open and return to this page automatically. If it does not open by itself, open it manually after the restart.
Try using your printer again.
If you successfully installed your HP printer, you're done! You can delete this troubleshooter if you'd like.
If the install was not yet successful, click here for further assistance.
Home Begin USB Troubleshooting>
Further Assistance Exit Start Over
Give us feedbackclose
Give us feedback
Select your answer, and then click the button that appears to send us your results.
Did this solution solve your problem?
Yes, it solved my problem No, it did not solve my problem I want to give HP more feedback. Take me to a short online survey to provide additional comments on how to improve this solution.
Exit without giving feedback
close
close
Confirm Exitclose
Exit Troubleshooter?
YesNo
For Further Assistanceclose
For Further Assistance
Visit HP Support Forums and connect with HP users to get insights, tips, and answers to questions about your product. Follow the link below to view the forums.*
Click here to go to the online HP Support Forums.
If you are still unable to install the HP software, please contact HP support.*
Click here to find HP contact information for your country/region.
* Support options and availability vary by product, country/region, and language.
OKHi @prdstudio3 ,
Thank you for visiting the HP Support Forums. The Serial Number needed to be removed from your Post. This is From our Rules of Participation:
Protect privacy - yours and others'. Don't share anything about yourself that you would not want to see on a road-side billboard. Don't post contact or other personal information-your own or anyone else's-or any content that you receive in one-to-one communications without the author's consent. For example, don’t post your computer’s serial # or contact information publicly, and do not allow someone you don’t know to remotely take control of your computer.
If you need people to contact you directly, either ask them to send you a private message or subscribe to the thread so you will be notified when there are replies. You may also click on your name anywhere in the forum and you will be taken to your profile page, where you can find a list of threads you have participated in.
Sharing personal email addresses, telephone numbers, and last names is not allowed for your safety. If you have any questions feel free to send me a private message in reply.
Thank you
George
I work for HP -
Itunes will not install on windows 7 home
Any one had this issue
Itunes will not install on windows 7 homeGo to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (Later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
Should you get the error iTunes.exe - Entry Point Not Found after the above reinstall then copy QTMovieWin.dll from:
C:\Program Files (x86)\Common Files\Apple\Apple Application Support
and paste into:
C:\Program Files (x86)\iTunes
The above paths would be for a 64-bit machine. Hopefully the same fix with the " (x86)" omitted would work on 32-bit systems with the same error.
tt2 -
Hp officejet pro 8610e driver will not install in windows 8.1
the Hp drivers will not install from disc or online download.
Hi @aggie62,
Welcome to the HP Forums!
I understand that your HP Officejet pro 8610 driver will not install on Windows 8.1. I am happy to help!
A few questions for starters:
What happens when you try to install the driver?
Do you see any error messages?
How is your printer connected? Wireless, Ethernet, or USB?
Are you able to make copies with your printer?
In the meantime, please try the following:
Uninstall the software. Uninstalling the Printer Software.
Clean boot the computer. How to perform a clean boot in Windows.
Disable any antivirus programs. How to Disable Antivirus in Windows 8?
Disable any firewall programs. Windows Firewall from start to finish.
Create a new user account. Managing User Accounts and Logins (Windows 8).
Re-install using the HP Printer Install Wizard for Windows .
Hope to hear from you soon!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping! -
ICloud Control Panel 2.1 will not install on Windows 7 x64
iCloud Control Panel 2.1 will not install on Windows 7 x64. If I try the to run the install from the Apple Software Updater it the iCloud 2.1 crashes and I get a message that suggests I do a download only and they run it locally. I do that and the install i.e. the exe file just seems to never start even if I try to "Run as Admin"
I go int o task manager and there is no instance of the install running.
What is the issue/work around to this?
Thx to all for help.
MichaelI didn't try creating a new user profile. Not sure I completely understand what you're suggesting. I dont't want a new/different profile. I just want to be able to install the update.
-
MultiMedia Center for Think Offerings for Windows XP and 2000 -- will not install on Windows 7
MultiMedia Center for Think Offerings for Windows XP and 2000 -- will not install on Windows 7 in compatibility mode or any other way. I receive error " can not open \device\memory" and then " This program can not run on his hardware.
Thinkcenter E series 8291-ETU --- upgraded from XP to Windows 7 yesterday.
Any ideas on how to get this product installed in Windows 7 ?I recently did a clean install of Win7 Ult on my X61 7676A24, and this is the only Lenovo software that I could not find a Win 7 solution for. However,
1. I was able to load WinDVD8 upgrade (from Lenovo's Win7 information page) after first loading the WinDVD5 version that was the last good release for Vista.
2. The Multimedia Center for Think Offerings is basically Roxio's suite for writing cd/dvd's, drag to disc and so on.
Since I could not load this anyway, I was forced to try out Win7's inbuilt cd/dvd writing - it works perfectly well. Even better, Win7 natively supports an excellent ISO burning tool. So, I think if you explore these inbuilt tools, you can probably live without the Mul Cent for Think Off.
TP600E > T41 > X61 > X201T > X220 i7 IPS 8GB 160GB SSD
Maybe you are looking for
-
How can I transfer music from my new Macbook Air to my old one
I can't transfer music from my new Macbook Air to the new one. I have,however, transfered music from my old one to the new one. What am I doing wrong?
-
Ordering by third person of copy of an order of an ibook ? is it possible?
Dear aal of you, dear Aple support, could you let me know if with the nr of an order (comes in the package of the book) would it be possible to order a copy (paid by the one who ordered, without the creator knowing of it ?) thanks for your answer kin
-
Total newbie trying to get started.
I have a domain name and am going to sign up with a web hosting company. If I purchase Contribute, can I use it to design a new web site or is Contribute only used to edit existing web pages? TIA
-
How do i update itunes on ipad2
how do i update itunes on ipad2?
-
can anyone help me on this forum? ive been on several forums and followed instructions and nothing has changed, ill try to explain my problem. ive got the n80 and been using pc suite ok with it untill i upgraded the firmware to v4.623.0.41 now the ca