Portege M800 - Exposed Sensitive Touchkeys does not work

I am owner of the Toshiba Portege M800-105. Everything does its work. After 2 month working on it, my exposed sensitive touchkeys next to the POWER-Button does not work. After I deinstalled the "Vista-Value-Added-Package" everything is working proper. Why? Now my FN-Keys are not working or are diabled. Why?
Before deinstallation the package, the first button next to the power-button had the function to turn off the backlight from the Logo, from the senitive touchkeys an from my touchpad. NOW it turn off the sound!!!! Fairy weired if you aks me. How can I fix my buttons up to factory settings and get FN-Buttons working?
I reinstalled the value added package again, and have the save problem as before: the first two buttons next to the power button does not work!
Unter the Application: Thoshiba Button Support, for the first two buttons there are no Keynames depositd/marked so that I can change there configuration.
FN-Keys works after installation the package, though not the sensitive keys! Please, who can help me?
The Value Added Package has small programs. One of them is the Toshiba Button Support. Whenn I deinstall it everything works. When I install it, nothing works.
Thank you for Help on [email protected]
Message was edited by: Togan_1

Hello guys
The whole thing is really strange. I really dont know what happen on your notebooks. The fact is that those buttons are controlled by software. If I am remembering well it called Button support or Button control and it is part of Value Added Package.
VAP contains several different tools and utilities. When you remove VAP it will be removed the application responsible for FN functionality (Flashcards) and this is the reason why the FN doesnt work anymore.
So, theoretically everything should be OK when you install VAP again. I repeat theoretically. Why you still have this problem I dont know and I dont believe nobody can say for sure. Maybe some registry entries are corrupted now? Who knows?
I presume you dont want to use most radical solution and make clean OS installation again but this can definitely help. With clean preinstalled OS (factory settings) everything will work well again.
At the end I must say that I use Satellite U400 (similar to your Portege) almost 6 months now and all buttons work properly. I still use preinstalled Vista version and I didnt made any changes. It works well.

Similar Messages

  • The Help Link from the Application Pages Does not Work for Peoplesoft Campus Solutions 9.0

    Hi everyone.
    I have a problem, I have been trying to set up the Help Link from the Application Pages for Peoplesoft Campus Solutions 9.0 according to the instructions given in the Document: http://docs.oracle.com/cd/E17566_01/epm91pbr0/eng/psbooks/EnablingtheHelpLinkfromApplicationPages.pdf ,  (referenced in the Doc ID 1289101.1, E-PB: How to Set Up the Context Sensitive Help with Hosted PeopleBooks using Universal Linking).
    I follow the instructions of that document carefully:
    I go to: PeopleTools -> Web Profile -> Web Profile Configuration
        2. Then I choose the Web Profile: "Development".
        3. Then Change the value for the Help URL field by entering the following URL format: http://www.oracle.com/pls/topic/lookup?id=%CONTEXT_ID%&ctx=hrcs90r5 , the ctx parameter selected is the one that correspond to  the Campus Solutions (hrcs90r5) according to the Product Line Code Table (ULinkID) especified in the mentioned document.
        4. Stop the Web Domain and Clear cache.
        5. Start the Web Domain again.
    After setting up the Web Profile Configuration I test the help links, thas is why I click in the Help link in any Peoplesoft CS 9.0 Application Page (modify a person), but the next error message appears: "We're sorry, the topic you requested was not found.".
    I tried many combinations with the ctx parameters URL but it does not work yet. 
    I did the same test, but this time using the Help URL field with a HRMS ctx parameter by entering the following URL format: http://www.oracle.com/pls/topic/lookup?id=%CONTEXT_ID%&ctx=hcm92pbr5 , and It works fine !!!
    According to the previous test you realize that It works with HRMS ctx parameter but not with Campus Solutions 9.0 ctx parameter,  Does anybody know what else can I do ? Am I doing anything wrong or missing? or maybe the Oracle's ctx parameter for Campus Solutions URL It is broken simply.
    Thanks for you help and feedback.

    2799444 - The page you are testing with appears to be a Workforce Administration page. Is that correct?
    The CS PeopleBooks would only work for CS pages, e.g.: try navigating to Main Menu > Campus Community > Personal Information > Add/Update a Person
    Also, you can use multiple ctx parameters:
    E.g.: http://www.oracle.com/pls/topic/lookup?id=%CONTEXT_ID%&ctx=hrcs90r5&ctx=hcm92pbr5&ctx=pt852pbh2
    This way the help would work for the HR related pages like Workforce Administration, Campus Solutions pages like Campus Community and also PeopleTools pages like Web Profile Configuration. Hope this clarifies your question. Thanks!

  • Want to set mailto for google apps;tried editing the gecko...mailto.2.uritemplate as per instructions found on web; set 3 related config values to "true" as per instructions; does not work; tried javascript method without success

    I want to set the mailto app for google apps gmail.
    I tried editing the gecko...mailto.2.uritemplate as per instructions found on web (https://mail.google.com/a/MYDOMAIN/mail/?extsrc=mailto&url=%s.
    Set 3 related config values to "true" as per instructions (network.protocol-handler.expose.mailto ; network.protocol-handler.warn-external.mailto ; AND, third, gecko.handlerService.allowRegisterFromDifferentHost.
    Does not work, no Google Apps in the mailto app spot.
    Tried javascript method in address bar without success:
    javascript:window.navigator.registerProtocolHandler("mailto","https://mail.google.com/a/MYDOMAIN/mail/?extsrc=mailto&url=%s","Google Apps GMail")
    Any light anyone can shed will be appreciated. Cheers, jlf

    Great howto Steve! This further increased my understanding of the MVC patterns used by BC4J.
    Some remarks:
    [*]Select New Business Components...
    This should be 'New Business Components Package', or you won't be able to add business components.
    ename as "Name",
    sal as "Salary"
    from emp
    where empno = ?That should be deptno.
    [*]Select the EditEmpsInDepartment view objectThat should be EmpsInDepartment.
    Greetings,
    Ivo

  • Access to Outlook Anywhere does not work

    Good evening,
    I recently installed an Exchange Server 2013 CAS / MB.
    Until now, the server presented a few errors (mainly in the
    event log) that does not seem to significantly influence functionality.
    This week I published the server on the Internet and verified various malfunctions
    related to the access from outside.
    In particular from outside:
    1 - OWA does not work with Windows integrated authentication, it works with the Forms based authentication;
    2 - Outlook Anywhere does not work from internet.
    I've done a lot of research and testing without success.
    With regard to the first issue (which is not a priority but can relate to second one)
    add that in Firefox I get a first authentication request. If
    I enter credentials it ask again for identical authentication (repeatly), if I cancel it shows a second one that instead allows me access (are slightly different).
    I assume that the first is the integrated Windows application and the second is basic authentication.
    Internet Explorer shows me only the first authentication request and if I cancel shows blank page.
    The problem is
    priority 2:
    Outlook connects without problems on LAN network, the Internet
    seems to download the correct information
    (autodiscover), but then does not connect
    to the server (connection to Microsoft Exchange is unavailable).
    If you manually edit the settings,
    auto-configuration server returns as
    a [email protected]. If I change
    manually the server (and proxy settings
    http), the result does not change.
    - Setting information -
    The server is installed
    in the LAN network and is exposed on the Internet through
    a firewall (Pat on port 443, et al. not 80)
    on a public address.
    The public and private DNS have been configured with a
    host record (A) and two
    CNAME (webmail and autodiscover).
    The internal Outlook clients connect
    with autodiscover and HTTPS /
    NTLM / SSL (Outlook connectivity
    status).
    IMAP, SMTP, POP, ActiveSync function.
    Exchange remote connectivity analizer retrieves Autodiscover information but doesn't pass test for RPC/HTTP access (it discard accesson
    port 443 and try port 80, SPF isn't configured).
    The navigation to the url
    https://proxyexternalURL/rpc/rpcproxy.dll  has the same behaviour like problem 1.
    Test-OutlookConnectivity returns unmanaged error ('WARNING: An unexpected error has occurred and a Watson dump is being generated: Failed to find the probe result for invoke now request id -- and probe workdefinition id --').
    Errors in eventviewer: 5011 - WAS (one time), 139 - MSExchange OWA (some not ripetitive), 3028 - MSExchangeApplicationLogic (every 6 hours), 106 - MSExchange common (many during working hour), 65535 - application (some at nighttime 00.00 - 03.00 a.m.), 1006
    - MSExchangeDiagnostic (every 30 min), 6002 - MSExchange Mid-Tier Storage (about every 5 minutes), 5 - MSExcahnge Workload Management (one time).
    Ask for further information.
    - Cmdlet and Autodiscover output -
    Get-OutlookAnywhere | fl name,*auth*,*ssl*,*host*
    Name                               : Rpc (Default Web site)
    ExternalClientAuthenticationMethod : Basic
    InternalClientAuthenticationMethod : Ntlm
    IISAuthenticationMethods           : {Basic, Ntlm, Negotiate}
    SSLOffloading                      : True
    ExternalClientsRequireSsl          : True
    InternalClientsRequireSsl          : True
    ExternalHostname                   : webmail.name_domain.test
    InternalHostname                   : webmail.name_domain.test
    Get-OutlookProvider | ft -autosize
    Name     Server CertPrincipalName                      TTL
    EXCH            msstd:webmail.name_domain.test         1  
    EXPR             msstd:webmail.name_domain.test         1  
    WEB                                              
         1  
    Get-AutodiscoverVirtualDirectory | fl name,*auth*,*url*
    Name                          : Autodiscover (Default Web site)
    InternalAuthenticationMethods : {Basic, WSSecu.testy, OAuth}
    ExternalAuthenticationMethods : {Basic, WSSecu.testy, OAuth}
    LiveIdNegotiateAuthentication : False
    WSSecu.testyAuthentication      : True
    LiveIdBasicAuthentication     : False
    BasicAuthentication           : True
    DigestAuthentication          : False
    WindowsAuthentication         : False
    OAuthAuthentication           : True
    AdfsAuthentication            : False
    InternalUrl                   :
    ExternalUrl                   :
    Get-MapiVirtualDirectory | fl name,*auth*,*url*
    Name                          : mapi (Default Web site)
    IISAuthenticationMethods      : {Basic, Ntlm, Negotiate}
    InternalAuthenticationMethods : {Basic, Ntlm, Negotiate}
    ExternalAuthenticationMethods : {Basic, Ntlm, Negotiate}
    InternalUrl                   : https://webmail.name_domain.test/mapi
    ExternalUrl                   : https://webmail.name_domain.test/mapi
    Autodiscover.xml
    <?xml version="1.0" encoding="utf-8"?>
    <Autodiscover xmlns="http://schemas.microsoft.com/exchange/autodiscover/responseschema/2006">
      <Response xmlns="http://schemas.microsoft.com/exchange/autodiscover/outlook/responseschema/2006a">
        <User>
          <DisplayName>user</DisplayName>
          <LegacyDN>/o=organization_name/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Recipients/cn=e4c0c18c8f214afbb5152bb08823179d-user</LegacyDN>
          <AutoDiscoverSMTPAddress>user@name_domain.test</AutoDiscoverSMTPAddress>
          <DeploymentId>d60c71c9-3740-404c-a38c-aa24e6105432</DeploymentId>
        </User>
        <Account>
          <AccountType>email</AccountType>
          <Action>settings</Action>
          <MicrosoftOnline>False</MicrosoftOnline>
          <Protocol>
            <Type>EXCH</Type>
            <Server>72036b30-a4d4-4b42-9c39-445bd04c23a6@name_domain.test</Server>
            <ServerDN>/o=organization_name/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=72036b30-a4d4-4b42-9c39-445bd04c23a6@name_domain.test</ServerDN>
            <ServerVersion>73C082C8</ServerVersion>
            <MdbDN>/o=organization_name/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=72036b30-a4d4-4b42-9c39-445bd04c23a6@name_domain.test/cn=Microsoft Private MDB</MdbDN>
            <PublicFolderServer>webmail.name_domain.test</PublicFolderServer>
            <AD>DC2.name_domain.test</AD>
            <ASUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</ASUrl>
            <EwsUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</EwsUrl>
            <EmwsUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</EmwsUrl>
            <EcpUrl>https://webmail.name_domain.test/ecp/</EcpUrl>
            <EcpUrl-um>?rfr=olk&amp;p=customize/voicemail.aspx&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-um>
            <EcpUrl-aggr>?rfr=olk&amp;p=personalsettings/EmailSubscriptions.slab&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-aggr>
            <EcpUrl-mt>PersonalSettings/DeliveryReport.aspx?rfr=olk&amp;exsvurl=1&amp;IsOWA=&lt;IsOWA&gt;&amp;MsgID=&lt;MsgID&gt;&amp;Mbx=&lt;Mbx&gt;&amp;realm=name_domain.test</EcpUrl-mt>
            <EcpUrl-ret>?rfr=olk&amp;p=organize/retentionpolicytags.slab&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-ret>
            <EcpUrl-sms>?rfr=olk&amp;p=sms/textmessaging.slab&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-sms>
            <EcpUrl-publish>customize/calendarpublishing.slab?rfr=olk&amp;exsvurl=1&amp;FldID=&lt;FldID&gt;&amp;realm=name_domain.test</EcpUrl-publish>
            <EcpUrl-photo>PersonalSettings/E.testAccount.aspx?rfr=olk&amp;chgPhoto=1&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-photo>
            <EcpUrl-tm>?rfr=olk&amp;ftr=TeamMailbox&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-tm>
            <EcpUrl-tmCreating>?rfr=olk&amp;ftr=TeamMailboxCreating&amp;SPUrl=&lt;SPUrl&gt;&amp;.testle=&lt;.testle&gt;&amp;SPTMAppUrl=&lt;SPTMAppUrl&gt;&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-tmCreating>
            <EcpUrl-tmE.testing>?rfr=olk&amp;ftr=TeamMailboxE.testing&amp;Id=&lt;Id&gt;&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-tmE.testing>
            <EcpUrl-extinstall>Extension/InstalledExtensions.slab?rfr=olk&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-extinstall>
            <OOFUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</OOFUrl>
            <UMUrl>https://webmail.name_domain.test/EWS/UM2007Legacy.asmx</UMUrl>
            <OABUrl>https://webmail.name_domain.test/OAB/e66d9a4a-6ed2-4512-b72f-522381524dd9/</OABUrl>
            <ServerExclusiveConnect>off</ServerExclusiveConnect>
            <CertPrincipalName>msstd:webmail.name_domain.test</CertPrincipalName>
          </Protocol>
          <Protocol>
            <Type>EXPR</Type>
            <Server>webmail.name_domain.test</Server>
            <SSL>On</SSL>
            <AuthPackage>Basic</AuthPackage>
            <ASUrl>https://webmail.name_domain.test/ews/exchange.asmx</ASUrl>
            <EwsUrl>https://webmail.name_domain.test/ews/exchange.asmx</EwsUrl>
            <EmwsUrl>https://webmail.name_domain.test/ews/exchange.asmx</EmwsUrl>
            <EcpUrl>https://webmail.name_domain.test/ecp/</EcpUrl>
            <EcpUrl-um>?rfr=olk&amp;p=customize/voicemail.aspx&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-um>
            <EcpUrl-aggr>?rfr=olk&amp;p=personalsettings/EmailSubscriptions.slab&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-aggr>
            <EcpUrl-mt>PersonalSettings/DeliveryReport.aspx?rfr=olk&amp;exsvurl=1&amp;IsOWA=&lt;IsOWA&gt;&amp;MsgID=&lt;MsgID&gt;&amp;Mbx=&lt;Mbx&gt;&amp;realm=name_domain.test</EcpUrl-mt>
            <EcpUrl-ret>?rfr=olk&amp;p=organize/retentionpolicytags.slab&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-ret>
            <EcpUrl-sms>?rfr=olk&amp;p=sms/textmessaging.slab&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-sms>
            <EcpUrl-publish>customize/calendarpublishing.slab?rfr=olk&amp;exsvurl=1&amp;FldID=&lt;FldID&gt;&amp;realm=name_domain.test</EcpUrl-publish>
            <EcpUrl-photo>PersonalSettings/E.testAccount.aspx?rfr=olk&amp;chgPhoto=1&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-photo>
            <EcpUrl-tm>?rfr=olk&amp;ftr=TeamMailbox&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-tm>
            <EcpUrl-tmCreating>?rfr=olk&amp;ftr=TeamMailboxCreating&amp;SPUrl=&lt;SPUrl&gt;&amp;.testle=&lt;.testle&gt;&amp;SPTMAppUrl=&lt;SPTMAppUrl&gt;&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-tmCreating>
            <EcpUrl-tmE.testing>?rfr=olk&amp;ftr=TeamMailboxE.testing&amp;Id=&lt;Id&gt;&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-tmE.testing>
            <EcpUrl-extinstall>Extension/InstalledExtensions.slab?rfr=olk&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-extinstall>
            <OOFUrl>https://webmail.name_domain.test/ews/exchange.asmx</OOFUrl>
            <UMUrl>https://webmail.name_domain.test/ews/UM2007Legacy.asmx</UMUrl>
            <OABUrl>https://webmail.name_domain.test/OAB/e66d9a4a-6ed2-4512-b72f-522381524dd9/</OABUrl>
            <ServerExclusiveConnect>on</ServerExclusiveConnect>
            <CertPrincipalName>msstd:webmail.name_domain.test</CertPrincipalName>
            <EwsPartnerUrl>https://webmail.name_domain.test/ews/exchange.asmx</EwsPartnerUrl>
            <GroupingInformation>LAN</GroupingInformation>
          </Protocol>
          <Protocol>
            <Type>WEB</Type>
            <Internal>
              <OWAUrl AuthenticationMethod="Basic, Fba">https://webmail.name_domain.test/</OWAUrl>
              <Protocol>
                <Type>EXCH</Type>
                <ASUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</ASUrl>
              </Protocol>
            </Internal>
            <External>
              <OWAUrl AuthenticationMethod="Basic">https://webmail.name_domain.test/</OWAUrl>
              <Protocol>
                <Type>EXPR</Type>
                <ASUrl>https://webmail.name_domain.test/ews/exchange.asmx</ASUrl>
              </Protocol>
            </External>
          </Protocol>
          <Protocol>
            <Type>EXHTTP</Type>
            <Server>webmail.name_domain.test</Server>
            <SSL>On</SSL>
            <AuthPackage>Ntlm</AuthPackage>
            <ASUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</ASUrl>
            <EwsUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</EwsUrl>
            <EmwsUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</EmwsUrl>
            <EcpUrl>https://webmail.name_domain.test/ecp/</EcpUrl>
            <EcpUrl-um>?rfr=olk&amp;p=customize/voicemail.aspx&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-um>
            <EcpUrl-aggr>?rfr=olk&amp;p=personalsettings/EmailSubscriptions.slab&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-aggr>
            <EcpUrl-mt>PersonalSettings/DeliveryReport.aspx?rfr=olk&amp;exsvurl=1&amp;IsOWA=&lt;IsOWA&gt;&amp;MsgID=&lt;MsgID&gt;&amp;Mbx=&lt;Mbx&gt;&amp;realm=name_domain.test</EcpUrl-mt>
            <EcpUrl-ret>?rfr=olk&amp;p=organize/retentionpolicytags.slab&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-ret>
            <EcpUrl-sms>?rfr=olk&amp;p=sms/textmessaging.slab&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-sms>
            <EcpUrl-publish>customize/calendarpublishing.slab?rfr=olk&amp;exsvurl=1&amp;FldID=&lt;FldID&gt;&amp;realm=name_domain.test</EcpUrl-publish>
            <EcpUrl-photo>PersonalSettings/E.testAccount.aspx?rfr=olk&amp;chgPhoto=1&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-photo>
            <EcpUrl-tm>?rfr=olk&amp;ftr=TeamMailbox&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-tm>
            <EcpUrl-tmCreating>?rfr=olk&amp;ftr=TeamMailboxCreating&amp;SPUrl=&lt;SPUrl&gt;&amp;.testle=&lt;.testle&gt;&amp;SPTMAppUrl=&lt;SPTMAppUrl&gt;&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-tmCreating>
            <EcpUrl-tmE.testing>?rfr=olk&amp;ftr=TeamMailboxE.testing&amp;Id=&lt;Id&gt;&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-tmE.testing>
            <EcpUrl-extinstall>Extension/InstalledExtensions.slab?rfr=olk&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-extinstall>
            <OOFUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</OOFUrl>
            <UMUrl>https://webmail.name_domain.test/EWS/UM2007Legacy.asmx</UMUrl>
            <OABUrl>https://webmail.name_domain.test/OAB/e66d9a4a-6ed2-4512-b72f-522381524dd9/</OABUrl>
            <ServerExclusiveConnect>On</ServerExclusiveConnect>
            <CertPrincipalName>msstd:webmail.name_domain.test</CertPrincipalName>
          </Protocol>
          <Protocol>
            <Type>EXHTTP</Type>
            <Server>webmail.name_domain.test</Server>
            <SSL>On</SSL>
            <AuthPackage>Basic</AuthPackage>
            <ASUrl>https://webmail.name_domain.test/ews/exchange.asmx</ASUrl>
            <EwsUrl>https://webmail.name_domain.test/ews/exchange.asmx</EwsUrl>
            <EmwsUrl>https://webmail.name_domain.test/ews/exchange.asmx</EmwsUrl>
            <EcpUrl>https://webmail.name_domain.test/ecp/</EcpUrl>
            <EcpUrl-um>?rfr=olk&amp;p=customize/voicemail.aspx&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-um>
            <EcpUrl-aggr>?rfr=olk&amp;p=personalsettings/EmailSubscriptions.slab&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-aggr>
            <EcpUrl-mt>PersonalSettings/DeliveryReport.aspx?rfr=olk&amp;exsvurl=1&amp;IsOWA=&lt;IsOWA&gt;&amp;MsgID=&lt;MsgID&gt;&amp;Mbx=&lt;Mbx&gt;&amp;realm=name_domain.test</EcpUrl-mt>
            <EcpUrl-ret>?rfr=olk&amp;p=organize/retentionpolicytags.slab&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-ret>
            <EcpUrl-sms>?rfr=olk&amp;p=sms/textmessaging.slab&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-sms>
            <EcpUrl-publish>customize/calendarpublishing.slab?rfr=olk&amp;exsvurl=1&amp;FldID=&lt;FldID&gt;&amp;realm=name_domain.test</EcpUrl-publish>
            <EcpUrl-photo>PersonalSettings/E.testAccount.aspx?rfr=olk&amp;chgPhoto=1&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-photo>
            <EcpUrl-tm>?rfr=olk&amp;ftr=TeamMailbox&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-tm>
            <EcpUrl-tmCreating>?rfr=olk&amp;ftr=TeamMailboxCreating&amp;SPUrl=&lt;SPUrl&gt;&amp;.testle=&lt;.testle&gt;&amp;SPTMAppUrl=&lt;SPTMAppUrl&gt;&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-tmCreating>
            <EcpUrl-tmE.testing>?rfr=olk&amp;ftr=TeamMailboxE.testing&amp;Id=&lt;Id&gt;&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-tmE.testing>
            <EcpUrl-extinstall>Extension/InstalledExtensions.slab?rfr=olk&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-extinstall>
            <OOFUrl>https://webmail.name_domain.test/ews/exchange.asmx</OOFUrl>
            <UMUrl>https://webmail.name_domain.test/ews/UM2007Legacy.asmx</UMUrl>
            <OABUrl>https://webmail.name_domain.test/OAB/e66d9a4a-6ed2-4512-b72f-522381524dd9/</OABUrl>
            <ServerExclusiveConnect>On</ServerExclusiveConnect>
            <CertPrincipalName>msstd:webmail.name_domain.test</CertPrincipalName>
          </Protocol>
        </Account>
      </Response>
    </Autodiscover>
    Get-OwaVirtualDirectory | fl name,*auth*,*url*
    Name                          : owa (Default Web Site)
    ClientAuthCleanupLevel        : High
    InternalAuthenticationMethods : {Basic, Fba}
    BasicAuthentication           : True
    WindowsAuthentication         : False
    DigestAuthentication          : False
    FormsAuthentication           : True
    LiveIdAuthentication          : False
    AdfsAuthentication            : False
    OAuthAuthentication           : False
    ExternalAuthenticationMethods : {Basic}
    Url                           : {}
    SetPhotoURL                   :
    Exchange2003Url               :
    FailbackUrl                   :
    InternalUrl                   : https://webmail.name_domain.test/
    ExternalUrl                   : https://webmail.name_domain.test/

    Follow the results of the test
    Outlook Anywhere (RPC over HTTP).
    Has been used an account for which
    outlook anywhere works. The account
    for which the outlook anywhere does not work is
    an administrative account and therefore
    can not be used in the test.
    Autodiscovery returns the
    same result for both mailbox.
    I'm testing RPC/HTTP connectivity.
    Testing RPC over HTTP has not been exceeded.
    Test steps
    Microsoft connectivity Analyzer is attempting to test the Autodiscover service for user_test@domain_name.test.
    Test the Autodiscover service has not been exceeded.
    Test steps
    I'm trying to contact the Autodiscover service with each method available.
    I was not able to contact the Autodiscover service with no method.
    Test steps
    I'm trying to test the possible URL for the Autodiscover service https://domain_name.test/AutoDiscover/AutoDiscover.xml
    The test of this potential URL for the Autodiscover service has not been exceeded.
    Test steps
    I'm trying to resolve the host name domain_name. DNS test.
    I was able to resolve the host name.
    IP addresses are returned: xxx.yyy.zzz.www
    I'm testing the TCP port 443 on the host domain_name. tests to check that is open and listening.
    The door has been opened properly.
    I'm testing the validity of your SSL certificate.
    The SSL certificate has not exceeded one or more validation controls.
    Test steps
    Microsoft connectivity Analyzer is attempting to obtain the SSL certificate from the remote server domain_name. test on port 443.
    Microsoft connectivity Analyzer got the remote SSL certificate.
    Remote certificate subject: E = it_staff@domain_name.test, CN = * domain_name. test, OU = it staff, O = domain_name, L = city, S = state, C = test issuer: E = it_staff@domain_name.test, CN = * domain_name. test, OU = it staff, O = domain_name,
    L = city, S = state, C = test.
    I am validating the certificate name.
    I could not validate the certificate name.
    More info about this issue and how to resove it
    The host name domain_name. testing does not match any name found on the certificate and server = it_staff@domain_name.test, CN = * domain_name. test, OU = it staff, O = domain_name, L = city, S = state, C = test.
    I'm trying to test the possible URL for the Autodiscover service https://autodiscover.domain_name.test/AutoDiscover/AutoDiscover.xml
    The test of this potential URL for the Autodiscover service has not been exceeded.
    Test steps
    I'm trying to resolve the host name autodiscover. domain_name. DNS test.
    I was able to resolve the host name.
    IP addresses are returned: xxx.yyy.zzz.kkk
    I'm testing the TCP port 443 on the host autodiscover. domain_name. tests to check that is open and listening.
    The door has been opened properly.
    I'm testing the validity of your SSL certificate.
    The SSL certificate has not exceeded one or more validation controls.
    Test steps
    Microsoft connectivity Analyzer is attempting to obtain the SSL certificate from the remote server autodiscover. domain_name. test on port 443.
    Microsoft connectivity Analyzer got the remote SSL certificate.
    Other details
    Remote certificate subject: CN = webmail. domain_name. test, OU = it staff, O = domain_name, L = city, S = city, C = test issuer: CN = domain_name-DC1-CA, DC = domain_name, DC = test.
    I am validating the certificate name.
    I validated the certificate name.
    Other details
    I found the host name autodiscover. domain_name. test in the voice of the alternative name of the certificate object.
    Elapsed time: 1 ms.
    I am validating the reliability of certificates.
    I was not able to validate the reliability of the certificate.
    Test steps
    Microsoft connectivity Analyzer is attempting to generate certificate chains to a certificate CN = webmail. domain_name. test, OU = it staff, O = domain_name, L = city, S = city, C = test.
    I failed to build a certificate chain for the certificate.
    Other details
    Failed to generate the certificate chain.
    May be missing the required intermediate certificates.
    I'm trying to contact the Autodiscover service using the HTTP redirect method.
    I was not able to contact the Autodiscover service using the HTTP redirect method.
    Test steps
    I'm trying to resolve the host name autodiscover. domain_name. DNS test.
    I was able to resolve the host name.
    IP addresses are returned: xxx.yyy.zzz.kkk
    I'm testing the TCP port 80 on the host autodiscover. domain_name. tests to check that is open and listening.
    The specified port is blocked, is not listening or doesn't produce the expected response.
    More info about this issue and how to resove it
    I encountered a network error while communicating with the remote host.
    I'm trying to
    find the
    SRV DNS record _audiscover._tcp.domain_name.test.
    I failed to find
    the SRV record of the
    Autodiscover service
    in DNS.
    Some clarifications:
    1 - xxx.yyy.zzz.www and xxx.yyy.zzz.kkk
    are two static public addresses
    of which only the latter exposes Exchange services;
    2 - The certificate
    *. Domain_name.test is not related
    to Exchange services;
    3 -I imported the certificate
    of the issuing CA on the standalone test PC to validate the certificate.
    3- The port 80 is not open and are not published SRV records.
    Best regards.

  • F1 Help does not work

    I followed the simple instructions to include F1 help key. The right click "Help" popup works but the F1 key does not work.
    Here's the one liner
    cshmanager_.addComponent(comp,helptopic,true,true);

    Hi Sachin,
    The F1 key events are delivered to the component that has the focus, and unlike some other AWT events they don't bubble up to any parent components. Is it possible that the component you mentioned did not have the focus at the time you pressed F1?
    There is a "Context Sensitive Help" demo that we distribute with Oracle Help for Java. The source for that demo is contained in the help4-demo.jar if you'd like to look at it. Does the context sensitive help work when you run that demo in your environment?

  • The sensitivity/pressure is not working correctly

    The sensitivity/pressure is not working correctly on my ipad 1 with ios4.3.
    Keyboard and Drums(especially snare), does not work properly.
    Please can this be fixed. Several friends have same issue. Alternatively, please have an option to turn off the 'pressure' feature.

    Not sure what to do on the drums, but on the keyboard you can "pinch" the two velocity slider bars together, which fixes the velocity to only one setting. This "pinched pair" can be slid up/down to adjust the single velocity.

  • My keyboard does not work

    i am having trouble with the keyboard but only with some keys. like for example I press the play button and it goes to expose, or i press the volume button and it goes to the desktop. Also my brightness button does not work. please help me.

    Sure! Go to system preferences>keyboard & mouse>keyboard and uncheck the little checkbox that says "use all F1, F2, etc. keys as standard function keys." once you uncheck that box your problem should be fixed.

  • Installed Premiere Pro CS4 but video display does not work?

    I just got my copy of CS$. After installing Premiere I found two things that seem very wrong:
    1) video display does not work, not even the little playback viewer next to improted film clips located on the project / sequence window. Audio works fine.
    2) the UI is way too slow for my big beefy system.
    My pc is a dual boot Vista-32 and XP system with 4GB of memory installed and nvidia geforce 280 graphics board with plenty of GPU power. The CS4 is installed on the Vista-32 partition. My windows XP partition on the same PC with Premiere CS2 works great and real fast.
    Any ideas how to solve this CS4 install issue?
    Ron

    I would like to thank Dan, Hunt, and Haram:
    The problem is now very clear to me. The problem only shows up with video footage imported into PP CS4 encoded with "MS Video 1" codec. So this seems to be a bug. The codec is very clearly called out and supported within various menues but video with this codec just will not play in any monitor or preview window. In addition the entire product looks horrible with respect to performance while PP CS4 trys its best to play the video. Audio will start playing after about 30 seconds. And once in awhile part of video shows up at the wrong magnification before blanking out again.
    My suggestion to the Adobe team: fix the bug and add some sample footage to the next release so new installations can test their systems with known footage.
    My PC is brand new with the following "beefy" components:
    Motherboard
    nForce 790i SLI FTW
    Features:
    3x PCI Express x16 graphics support
    PCI Express 2.0
    NVIDIA SLI-Ready (requires multiple NVIDIA GeForce GPUs)
    DDR3-2000 SLI-Ready memory w/ ERP 2.0 (requires select third party system memory)
    Overclocking tools
    NVIDIA MediaSheild w/ 9 SATA 3 Gb/sec ports
    ESA Certified
    NVIDIA DualNet and FirstPacket Ethernet technology
    Registered
    CPU: Intel Core 2 Quad Q9550
    S-Spec: SLAWQ
    Ver: E36105-001
    Product Code: BX80569Q9550
    Made in Malaysia
    Pack Date: 09/04/08
    Features:
    Freq.: 2.83 GHz
    L2 Cache: 12 MHz Cache
    FSB: 1333 MHz (MT/s)
    Core: 45nm
    Code named: Yorkfield
    Power:95W
    Socket: LGA775
    Cooling: Liquid Cooled
    NVIDIAGeForce GTX 280 SC graphics card
    Features:
    1 GB of onboard memory
    Full Microsoft DirectX 10
    NVIDIA 2-way and 3-way SLI Ready
    NVIDIA PureVideo HD technology
    NVIDIA PhysX Ready
    NVIDI CUDA technology
    PCI Express 2.0 support
    Dual-link HDCP
    OpenGL 2.1 Capaple
    Output: DVI (2 dual-link), HDTV
    Western Digital
    2 WD VelociRaptor 300 GB SATA Hard Drives configured as Raid 0
    Features:
    10,000 RPM, 3 Gb/sec transfer rate
    RAM Memory , Corsair 4 GB (2 x 2 GB) 1333 MHz DDR3
    p/n: TW3X4G1333C9DHX G
    product: CM3X2048-1333C9DHX
    Features:
    XMS3 DHX Dual-Path 'heat xchange'
    2048 x 2 MB
    1333 MHz
    Latency 9-9-9-24-2T
    1.6V ver3.2

  • A2109 tablet autorotate does not work

    The autorotation on my recently purchased tablet A2109 does not work. I look in settings and the auto rotate field is not highlighted, I therefore cannot choose to turn it on.The tablet has the Android jellybean OS and I did update it but to no avail. Can anyone help?
    Thanks
    Solved!
    Go to Solution.

    Dear tdsouza
    Welcome in lenovo forums
    just a clarification , do you mean option Rotate is dimmed in setting 
    Please let me know 
    Thanks
    Alaa
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • For what reason on my tablet with OS Android 4.1 does not work flash on the sites?

    Hi! I recently bought a Google Nexus 7 tablet with Android 4.1 operating system and on my tablet does not work flash sites. Why adobe does not release a new version of flash for android 4.1? Why it was necessary to buy a company Macromedia, if adobe does not want to develop web technology? I think against Adobe can sue for violation of antitrust

    I found this for example:
    http://www.slashgear.com/adobe-no-jelly-bean-flash-flash-player-pulled-altogether-august-1 5-29236404/

  • My flash flayer does not work on my Windows 8 Surface Tablet, it also won't let me see if i already

    My flash flayer does not work on my Windows 8 Surface Tablet, it also won't let me see if i already have it installed...

    1.      Are you getting any error message?
    2.      Which browser are you using?
    3.      Were there any recent changes made on the computer prior to the issue?

  • My flash player does not work on my tablet.

    My flash player does not work on my tablet

    Your tablet uses Android OS.
    There is no more Flash Player for Android and there won't be another. Android is no longer compatible with Flash Player. Playing Flash content is very processor consumptive and it drains your battery, also shortening the life of it. Android (Google) recommends using either "Dolphin" or "Puffin" as your browser if you need to view Flash content with a mobile device running Android. They're both free in the GooglePlay store. These browsers use "server side" rendering to reduce the load on your device.

  • Dynamic image does not work in the template builder plug-in (Apex-BI Intgr)

    Hi all, I posted this problem in the BI Publisher topic but nobody responded maybe this is because mods thought this is an Apex-BI integration issue.
    If I'm in the wrong place, please do warn me.
    The documentation says:
    Direct Insertion
    Insert the jpg, gif, or png image directly in your template.
    ...This works obviously
    URL Reference
    1. Insert a dummy image in your template.
    2. In Microsoft Word's Format Picture dialog box select the Web tab. Enter the following syntax in the Alternative text region to reference the image URL:
    url:{'http://image location'}
    For example, enter: url:{'http://www.oracle.com/images/ora_log.gif'}
    ...This works too when I hardcode an url as url:{'http://www.google.com.tr/images/firefox/mobiledownload.png'}
    Element Reference from XML File
    1. Insert a dummy image in your template.
    2. In Microsoft Word's Format Picture dialog box select the Web tab. Enter the following syntax in the Alternative text region to reference the image URL:
    url:{IMAGE_LOCATION}
    where IMAGE_LOCATION is an element from your XML file that holds the full URL to the image.
    ...This, however, does not work.
    I use Apex' report query tool and My query is like
    select 'http://www.google.com.tr/images/firefox/mobiledownload.png' IMAGE_LOCATION from ... (a single result set for my template)
    the xml data is generated with an IMAGE_LOCATION tag. I load it to word template plug-in. The Url successfully displays in the report if I make it a plain-simple field.
    But when it's in the image format->web->alt text as url:{IMAGE_LOCATION} no image displayed.
    I need to keep this design procedure simple so a simple word user could design a report via using just template builder plug-in. I don't wish to explore the xsl-fo area...yet.
    Could you tell me why I can't get this url:{IMAGE_LOCATION} to work?
    Regards
    PS: My BI version: 10.1.3.4.1

    Hi Oeren,
    your steps seem basically to be correct. I have a tutorial how to do this here (in german)
    http://www.oracle.com/webfolder/technetwork/de/community/apex/tipps/pdf-dyn-images/index.html
    when you see the URL corrently as long as you have it as a plain text field, the XML tag and the
    referencing seem to be OK.
    Here are two thought - the issue might be one of these ...
    How did you insert the dummy image into the word document - did you do it via "insert" or
    via "link to file". "Link to File" does not work - you must choose the simple "insert".
    Another one: Does your BI Server have a connection to the internet - is the proxy server correctly set ..?
    Does this help ..?
    Regards
    -Carsten
    Cloud Computing mit APEX umsetzen. Jetzt!
    http://tinyurl.com/apexcloudde
    SQL und PL/SQL: Tipps, Tricks & Best Practice
    http://sql-plsql-de.blogspot.com

  • I have an event in my calendar that was sent by someone who does not work for the company anymore and I am reminded 2 times a week. How can I remove it?

    I have an event in my calendar that was sent by someone that does not work for the company anymore and I am reminded 2 times a week. How do I delete it?

    Tap on the event to open the event. Click the 'Edit' button in the event bubble, then press the 'Delete Event' button at the bottom of the Edit pop-up. It's a little different for events that come through Microsoft Exchange, you tap the event to bring up bubble and click the 'Details' button, and then press 'Decline' to remove the event.

  • Thanks for responding.  Since I upgraded ITUNES to IOS 6, my IPOD Touch no longer works at all.  I had numerous apps, music and videos on this touch.  It made me restore to factory reset and it still does not work!!! Nothing I do will work on this touch n

    Thanks for responding. Since I upgraded ITUNES to IOS 6, my IPOD Touch no longer works at all. I had numerous apps, music and videos on this touch. It made me restore to factory reset and it still does not work!!! Nothing I do will work on this touch now. I have so much data on this, I don't want to loose or have to restore!
    Can you help me?
    Thanks

    If you restored to factory settings/new iPod and still have the problem that indicates a hardware problem.
    Make an appointment at the Genius Bar of an Apple store..
    Apple Retail Store - Genius Bar

Maybe you are looking for

  • Computer not responding to iphone usb connection

    I get no response from plugging in my iphone 3g. I've tried restarting the computer and the phone many times, still nothing? All software up to date, computer, iphone and itunes.

  • VS 2010 Silverlight project upgraded to VS 2013 - not hitting break point.

    dear Readers, thank you for taking the time to read this posting. we had developed a SL project using VS 2010 and it was successfully upgraded to vs 2013.  after a couple of hiccups, the application compiled and ran successfully.  the SL app is still

  • Tcode mi40

    hello sir, this is my first time using batch input session method for physical inventory i try to use MI40 BUT SYSTEM SHOWING ERROR "Sequential file phyinv39_40 cannot be opened" i m unable to understand  the error please tell me how to follow steps

  • Problem using multiple collections in web gallery

    I have a web gallery in LR5 that I created in LR2. It consists of four collections with individual titles. When I try to include the titles using the right-hand panel in the web module, when I change the title of one collection, all four collection t

  • VNC tool compatibility with WinCE and Windows Embedded Compact 2013 operating systems

    What are all the VNC tools that are compatible with WinCE and Windows Embedded Compact 2013 operating systems or are there any RDP solutions available? I am looking for a common VNC tool which is compatible on both the operating systems?