Portege R100: Solution how to restore the unit without using a CD-ROM drive

I have just re-stored my Toshiba R100 after nearly 3 years of owning it without a single format due to the complexities of getting a working bootable CD-ROM drive.
This won't help those of you who have a non booting laptop but if yours is booting I used the following method to re-store my laptop with zero problems.
1. Put the restore CDs into another computer and extract the Ghost image files "01131000.GHO" and "01131000.CRC" from disk 1 and "01131001.GHS" from disk 2.
2. If your laptop has a second partition then transfer these files to a directory on your non windows partition. If not you will have to use partition magic to create one.
3. Create a Norton Ghost boot disk from a retail version of Norton ghost and a Windows 98 Boot disk.
4. Boot the Laptop from the Windows 98 Floppy disk, then swap disks and run Ghost.
5. Select Local>Local Disk>From Image
And select the 01131000.GHO file.
6. Select the only image offered to you, then select the R100?s drive, and finally select the main boot partition.
7. Hit go!
8. Re-boot and follow the windows configuration and you're done.

Hi George.
Thanks for your useful description.
I'm sure it will help other users here in our community.

Similar Messages

How to list the datasources without use a tnsnames.ora file?

Hi,
I want to use the OracleDataSourceEnumerator class of ODP.Net to list the datasources on which the user can connect.
It's work with a tnsnames.ora on the local station, so good.
But I want use the easy connect naming methode so i have edited the sqlnet.ora file with this:
NAMES.DIRECTORY_PATH= (EZCONNECT, TNSNAMES)
then i have deleted the content of the tnsnames.ora
so my code don't work : none datasource is returned by the OracleDataSourceEnumerator
So my question : is it a way to list the datasources without use a tnsnames.ora file?
Edited by: user13499556 on 17 déc. 2010 08:21

You can check
DataConnectionFile.EnumerateDependants method
This post is my own opinion and does not necessarily reflect the opinion or view of Slalom.

How to restore the lost free space on my hard drive ? :(

Hey all ...
One week ago, I tried to Install a game ... but while it was installing ... I Forced quit the installing because my macbook froze . I realized that the free space available on my hard drive is less than what it was before ... about 17 GB were gone
I used the " Clean My Mac " app to remove not used and unwanted files but my hard drive free space still the same
So right now i need the best solution from you guys ... and Im thinking to format my macbook but I dont how :P

Welcome to Apple Discussions
Don't rush to reformat and reinstall just yet, grab a copy of Disc Inventory X and see if you can see the unwanted file(s) that's taking the space with that ?

How to send the email without using server side (Php, java)

How to send the (Run time image or file) Email & Attachment in Flex web application. without using php, java.

Well, at some point your email needs to be handed over to an SMTP server. It's a fair amount of work, but if you want to just send an email you could open a socket to a mail server's SMTP port and follow the SMTP protocols to send your email.
ActionScript sockets: http://help.adobe.com/en_US/ActionScript/3.0_ProgrammingAS3/WS5b3ccc516d4fbf351e63e3d118a9 b90204-7cf7.html
SMTP protocol: http://tools.ietf.org/html/rfc821
-- Tom

How to send the email without using SOST

Hiiiiii Every1,
What i m usiing is SO_NEW_DOCUMENT_SEND_API1 FM to send the email to internet add. as well as SAP User.
The Problem is that i have to go to SOST to send the Pending mails. and send the jobs manually.
Then it works all right.
What i want that i don't wnat to send this jobs/ emails mannually by going to SOST..
Is it possible to do it without using SOST.

hi
i am not sure but give this code a try
REPORT YEMAIL.
TABLES: USR02.
DATA: C(15).
DATA: SENT LIKE SONV-FLAG.
DATA: EMAIL_ID LIKE SOFOLENTI1-OBJECT_ID.
DATA: BEGIN OF EMAIL_DATA.
        INCLUDE STRUCTURE SODOCCHGI1.
DATA: END OF EMAIL_DATA.
DATA: BEGIN OF EMAIL_SEND OCCURS 10.
        INCLUDE STRUCTURE SOMLRECI1.
DATA: END OF EMAIL_SEND.
DATA: BEGIN OF EMAIL_TEXT OCCURS 10.
        INCLUDE STRUCTURE SOLISTI1.
DATA: END OF EMAIL_TEXT.
PARAMETERS: ALL__CLI RADIOBUTTON GROUP RADI.
PARAMETERS: THIS_CLI RADIOBUTTON GROUP RADI.
PARAMETERS: SELECT__ RADIOBUTTON GROUP RADI.
SELECT-OPTIONS SEND_TO FOR C NO INTERVALS.
SELECTION-SCREEN SKIP.
PARAMETERS: SUBJECT(30).
SELECTION-SCREEN SKIP.
SELECTION-SCREEN COMMENT /1(20) TEXT-999.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: L1(84).
SELECTION-SCREEN END OF LINE.SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: L2(84).
SELECTION-SCREEN END OF LINE.SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: L3(84).
SELECTION-SCREEN END OF LINE.SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: L4(84).
SELECTION-SCREEN END OF LINE.SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: L5(84).
SELECTION-SCREEN END OF LINE.SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: L6(84).
SELECTION-SCREEN END OF LINE.SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: L7(84).
SELECTION-SCREEN END OF LINE.SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: L8(84).
SELECTION-SCREEN END OF LINE.SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: L9(84).
SELECTION-SCREEN END OF LINE.
EMAIL_TEXT-LINE = L1.
APPEND EMAIL_TEXT.
EMAIL_TEXT-LINE = L2.
APPEND EMAIL_TEXT.
EMAIL_TEXT-LINE = L3.
APPEND EMAIL_TEXT.
EMAIL_TEXT-LINE = L4.
APPEND EMAIL_TEXT.
EMAIL_TEXT-LINE = L5.
APPEND EMAIL_TEXT.
EMAIL_TEXT-LINE = L6.
APPEND EMAIL_TEXT.
EMAIL_TEXT-LINE = L7.
APPEND EMAIL_TEXT.
EMAIL_TEXT-LINE = L8.
APPEND EMAIL_TEXT.
EMAIL_TEXT-LINE = L9.
APPEND EMAIL_TEXT.
EMAIL_DATA-OBJ_NAME = 'MESSAGE'.
EMAIL_DATA-OBJ_DESCR = SUBJECT.
EMAIL_DATA-OBJ_LANGU = 'E'.
EMAIL_DATA-SENSITIVTY = 'P'.
EMAIL_DATA-OBJ_PRIO = '1'.
EMAIL_DATA-NO_CHANGE = 'X'.
EMAIL_DATA-PRIORITY = '1'.
BREAK-POINT.
IF SELECT__ = 'X'.
LOOP AT SEND_TO.
    EMAIL_SEND-RECEIVER = SEND_TO-LOW.
    EMAIL_SEND-REC_TYPE = 'U'.
    EMAIL_SEND-EXPRESS = 'X'.
    APPEND EMAIL_SEND.
ENDLOOP.
ELSEIF THIS_CLI = 'X'.
SELECT * FROM USR02.
    IF USR02-USTYP = 'A' AND USR02-BNAME NE 'SAP*'
    AND USR02-BNAME NE 'DDIC'.
      EMAIL_SEND-RECEIVER = USR02-BNAME.
      EMAIL_SEND-REC_TYPE = 'U'.
      EMAIL_SEND-EXPRESS = 'X'.
      APPEND EMAIL_SEND.
    ENDIF.
ENDSELECT.
ELSEIF ALL__CLI = 'X'.
SELECT * FROM USR02 CLIENT SPECIFIED.
    IF USR02-USTYP = 'A' AND USR02-BNAME NE 'SAP*'
    AND USR02-BNAME NE 'DDIC'.
      EMAIL_SEND-RECEIVER = USR02-BNAME.
      EMAIL_SEND-REC_TYPE = 'U'.
      EMAIL_SEND-EXPRESS = 'X'.
      APPEND EMAIL_SEND.
    ENDIF.
ENDSELECT.
ENDIF.
BREAK-POINT.
EXIT.
CALL FUNCTION 'SO_NEW_DOCUMENT_SEND_API1'
     EXPORTING
          DOCUMENT_DATA              = EMAIL_DATA
          DOCUMENT_TYPE              = 'RAW'
          PUT_IN_OUTBOX              = 'X'
     IMPORTING
          SENT_TO_ALL                = SENT
          NEW_OBJECT_ID              = EMAIL_ID
     TABLES
          OBJECT_CONTENT             = EMAIL_TEXT
          RECEIVERS                  = EMAIL_SEND
     EXCEPTIONS
          TOO_MANY_RECEIVERS         = 1
          DOCUMENT_NOT_SENT          = 2
          DOCUMENT_TYPE_NOT_EXIST    = 3
          OPERATION_NO_AUTHORIZATION = 4
          PARAMETER_ERROR            = 5
          X_ERROR                    = 6
          ENQUEUE_ERROR              = 7
          OTHERS                     = 8.
regs
Arun

How to setup the WRT350N to use a USB NTFS Drive for backup storage?

My network consists of a WRT350N Router/AP/NAS (with a 500GB NTFS formatted USB drive), a Windows Vista Ultimate Desktop (wired connection), a Windows Pro SP2 Desktop (wired connection) and a Windows Pro SP2 Laptop (wireless connection).
Does anyone know what settings to use for the WRT350N and how to setup each of the computers to allow me to use the WRT350N for Backup file Storage?
For example: Can I/should I enable and use the ftp server functions? Can I just use the guest user account for all logins; etc.? Do I have to reformat the USB Drive to FAT32?
Any help would be appreciated!

Here is the clue to your question.
1.If you have formatted your Disk with the help of your computer it will be better if you reformat it with the "Erase" button
available on the Storage Tab of the Linksys
router's Setup page.
2.After that You need to make sure that you have
public IP address as your WAN IP on the status of the router to setup a FTP server.
3.You can use guest account for all your users but
please make sure that you select guest as group
while creating user.

How to upload the file without using java components?

Hello,
I need to upload the file using JSP, but I don't want to use java componets(such as
jspsmart).
Who can tell me how to realize it? This issue is very important to me,
thanks all in advance!

make you're own servlet using the multipartrequest from o'reilly.
easy and simple, no jspsmart, only 1 jar file and some descent programming.
I use it like that...

How to restore ipod touch without using itunes

Did a software update for my ipod touch and now my ipod is stuck on the connect to itunes screen and itunes and my computer don't recognze the device. I can get it into recovery mode and see it under devices on my computer but it won't install the drivers that are needed for the ipod. I have done every possible step in the troubleshooting guides. I keep getting the same error message saying that the device driver software was not successfully installed. itunes won't recognize the ipod, under my computer does not dispaly ipod as connected, I can view that it is in recovery mode under the devices and printers but the drivers will not install by following the steps on apple support. Any advice will be much appreciated. Please don't just give me a link to some support section on apple because I have tried them all. I am using windows 7 professional and have updated to the latest version of itunes.

Sounds like you might want to take a look at this article: http://support.apple.com/kb/TS1538
It has a lot of steps that can help you deal with why your device isn't showing up within iTunes, but does show in recovery mode.

How to reset the iphone without using restriction passcode, how to reset the iphone without using restriction passcode

The phone is showing restriction passcode on, but i have not set it and even after 15 attempts i could not get what this passcode is. I want to reset my phone as i have forget the Apple ID password and unable to reset again. please help

Are you saying that not only do you not know the restrictions passcode, you also don't know the Apple ID/Password that was originally used to activate this phone?
If so, you won't be able to do anything with that phone but look at it, & Apple can't/won't help you with this.

How to restore the original copy of OS.

The hard disk of my notebook got damaged and now I have installed new hard disk but since I didnt had any backup the windows 8.1 OS also got lost. Now I have installed trial version, can anyone let me know how to restore the original copy of OS.

If you did not make your Recovery Media set call HP Support to order one.
If you live in the US/CA, contact HP info Here.
If you live in another part of the world, start here>>Contact HP
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

How to calculate the unit for RATE?

Hey All,
I am not sure if there is something standard for this or not.
I am calculating the 'Rate' by using 'Value/Amount' and 'Quantity' as follows -
Rate == Value / Quantity
I need to calculate the unit for the rate as below -
Rate unit == Value unit (Currency) / Quantity unit (Base_uom)
(for example -
if value is 1000 USD and quantity is 10 TO then Rate should come out as 100 USD / TO)
Could anyone please suggest how to calculate the unit in this case?
Many Thanks!
Tanu

Hi,
Go through the below link it may give some idea
http://help.sap.com/saphelp_nw04/Helpdata/EN/19/1d7abc80ca4817a72009998cdeebe0/content.htm
Regards,
Marasa.

How to restore the contacts from iPad 2 to iPhone 5? I lost some of my contacts after deleting a closed email account; however I have them all in my iPad!

How to restore the contacts from iPad 2 to iPhone 5? I lost some of my contacts after deleting a closed email account; however I have them all in my iPad!

Do you see those in www.icloud.com? Yes- sign in to icloud on the phone.
No- how did you get those to the ipad?

I forgot my passcode for the ipad and i can't connect to iTunes because it keeps giving me error message that i have to unlcok the ipad first... any advice on how to restore the ipad or unlock it?

i forgot my passcode for the ipad and i can't connect to iTunes because it keeps giving me error message that i have to unlcok the ipad first... any advice on how to restore the ipad or unlock it?

You have to restore the device within iTunes. You want to use the same computer that you always sync with so that you can restore your app data and settings. You can restore with any other computer, but you will lose everything on the iPad.
This will tell you how to restore
http://support.apple.com/kb/HT1414
You will probably need to use recovery mode
http://support.apple.com/kb/ht4097

HT4061 how to restore the iphone 4 when you get a restore message error (-1)?

how to restore the iphone 4 when you get a restore message error (-1)?

If the iPhone was jailbroken, you get this error due to baseband mismatch. No help for such iPhones here in this forum.
if not, Restore on another computer. If error persists it is hardware failure.

How to restore the appearance of this message? "Requested an encrypted connection to a page [...] Probability of read data [...] [Optional] Always warn me before [...]" Is disabled by default and now I have it shut off permanently.

Hello!
I have a problem, because when the message appeared:
(original)
"Zabezpieczenia
Zażądano połączenia szyfrowanego ze stroną, która zawiera elementy niezaszyfrowane.
Prawdopodobieństwo odczytania przesyłanych danych przez osoby trzecie jest duże.
[Opcja] Zawsze ostrzegaj przed nawiazaniem połączenia szyfrowanego ze stroną zawierającą elementy niezaszyfrowane."
(in translation)
"Security
Requested an encrypted connection to a page that contains the elements unencrypted.
Probability of read data transmitted by third parties is large.
[Optional] Always warn me before you make an encrypted connection to the page containing the unencrypted parts."
option "Always warn ..." is disabled by default and by chance it shut off permanently.
How to restore the appearance of this message?
Sincerely,
Jadwiga Zabagło

Hello!
I have a problem, because when the message appeared:
(original)
"Zabezpieczenia
Zażądano połączenia szyfrowanego ze stroną, która zawiera elementy niezaszyfrowane.
Prawdopodobieństwo odczytania przesyłanych danych przez osoby trzecie jest duże.
[Opcja] Zawsze ostrzegaj przed nawiazaniem połączenia szyfrowanego ze stroną zawierającą elementy niezaszyfrowane."
(in translation)
"Security
Requested an encrypted connection to a page that contains the elements unencrypted.
Probability of read data transmitted by third parties is large.
[Optional] Always warn me before you make an encrypted connection to the page containing the unencrypted parts."
option "Always warn ..." is disabled by default and by chance it shut off permanently.
How to restore the appearance of this message?
Sincerely,
Jadwiga Zabagło

Portege R100: Solution how to restore the unit without using a CD-ROM drive

Similar Messages

Maybe you are looking for