Portege R500 - Upgrade procesor and RAM

Can I upgrade proceror and RAM in my R500?
Is possible?? If yes, how procesor can i used?
Robert

hi RoboS,
first of all the modell number is needed to check which hardware is in the machine.
to upgrade ram: easy - there should be a door marked with a ram-symbol on the bottom of the machine. open up and insert more memory
make sure that the system is powerless: remove ac-adapter and battery!
make also sure that the new ram modules meets the specifications.
upgrade the cpu: much more difficult and toshiba dont support this upgrade...
search for your modeltype with a bigger cpu and check if it has a socket (should be), this cpu should go together with your machine...
but remember: double the ram isnt that expensive than upgrade cpu and you have more fun with a bigger amount auf ram than a bit faster cpu....

Similar Messages

Portege R500 upgrade to Win 7 64 bit: touchpad scroll lost and no driver

Dear All,
I have upgraded the OS of my portege R500 to WIndows 7 64 bit and had the following problems:
1. At first the touchpad scroll worked fine (with no driver installed) but then it stopped working .... so I looked for a driver but
2. There are no driver for the touchpad (Alps) that is recognized as a PS compatible mouse
BTW uninstall and reinstall did not work, and I have searched a lot through the web but found no solution.
I have downloaded the drivers for VISTA 64bit, is it safe to use?
Any hints appreciated, thanks.
Simone

Hi
>I have downloaded the drivers for VISTA 64bit, is it safe to use?
Yes, its safe You can try to install touchpad drivers for Vista in worst case you will get a error message that this driver is not compatible or will not work.
But listen dude there are Win 7 Alps and Synaptics touchpad drivers for Win 7.
The drivers have been released for other notebook series.
Check the Satellite L500 area for example
I found Win 7 64bit drivers:
Synaptics v14.0.11.0
Alps Electric v7.x5.303.117
Greets

Qosmio X775-3DV78 upgrades (HDD and RAM)

I am looking to upgrade my laptop, is it possible to add more RAM to this? I see that the max is 8 gigs, anyway to upgrade it to use 2 - 8 gig sticks? Also, I am looking to replace the HDD with a faster SSD, any guides out there on how to do this? Thanks for the help!

Solved: Since this board is so lively and bustling with activity for anyone else with the same quesion, I've upgrade to 16GB ram and a SSD HD. Go to crucial.com and check your sytem for available compatible upgrades.

Macbook upgrade ssd and ram

hello i have macbook early 2011 15 inch can i upgrade the ram from 4 gb to 16 or i can't and which kind of ram can i use like 1333 mhz or 1600 mhz and which ssd work with my macbook i forget say my presser is 2.0

Memory can be:
Maximum Memory
16 GB (Actual) 8 GB (Apple)
Memory Slots
2 - 204-pin PC-10600 (1333 MHz) DDR3 SO-DIMM
You can install any SATA SSD you want and can afford. Visit OWC and DataMem for memory and drives as well as Crucial.com for memory.

UPGRADING PROCESSOR AND RAM

Hello, pls i'm asking to know the possibility of upgrading my processor from AMD A6-3430MX APU with Radeon(tm) HD Graphics to an A10 processor, which will boost the strength of my gaming...is it possible to buy only the A10 processor and replace it on my A6 because the current processor does not support most of my gaming needs while i have enough video graphics memory (1.5gb Radeon). However, i also want to know the amount of maximum RAM the computer can accomodate because currently i have 6gb RAM and i'm thinking of upgrading it to 8gb. Will these changes affect the computer negatively? or what? because i think it the best economical option for me rather than waiting to buy a bigger laptop with a higher processor...Games that require such high specs include upcoming Watchdogs, Need for Speed Rivals, Call of Duty ghost, Upcoming Hitman 6, and so many others...I'm waiting for a feedback

Hello, below are the details of my Laptop...I hope it will serve enough details..Looking forward to hear from you
HP Pavilion dv6-6c01se Entertainment Notebook PC
HP Pavilion dv6 Notebook PC , Serial Number 2CE2102XX4, Product Number A7Q72EA#ABV, Windows 7 Home Premium 64-bit Service Pack 1, AMD A6-3430MX APU with Radeon(tm) HD Graphics, 6GB RAM, System Board 1807 33.58, System BIOS F.1C, Hard Drive 750gb Hitachi HTS547575A9E384 SATA Disk Device,

Upgrade CPU and RAM on Lenovo G480

Hello, I wanted to ask something: can I upgrade my CPU on my lenovo G480? And in case of a positive answer, which CPU's are compatible with it? Also, I bought an 8gb RAM, and installed it on my notebook, and it says that I have 12 GB of ram, but I read somewhere else that I can only have 8 GB of ram on my notebook... this means that what the system says is a lie and thus I still can only use 4gb of ram of the 12 that it shows? Thanks in advance.

Hi Snipercat94,
Welcome to Lenovo Community!
As per the query we understood that you are looking for CPU & memory up-gradation for your Lenovo G480.
Yes, you can up-grade the processor and the list is available in Hardware Maintenance Manual you can check it on page 101.
It is good to know that G480 is detecting 12 GB of RAM, and as per the OS it is showing 4 GB RAM that means you system is having 32bit Operating System, suggest you to install 64bit Operating System.
Hope this helps.
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Upgrade MacBook - Hard Drive and RAM

I want to upgrade my daughter's early 2008 white MacBook - both internal drive and RAM. I know how to install both and have done so before. I have purchased the internal drive, the RAM and a large external drive for Time Machine backups now and for the future. I also want to install Lion. I'm not sure of the sequence... Here is what I propose:
1) format the new external hard drive and then back up the current internal drive using Time Machine.
2) install the new RAM.
3) install the new internal drive.
4) boot up using Snow Leopard DVD. Install OS 10.6
5) upgrade to 10.6.8
6) install Lion.
7) import all of her applications, files, etc. from the Time Machine backup.
8) done?
Is this correct - will all work?
9) back up the new internal drive using Time Machine.
Will step #9 work when I select "Back Up Now" from the Time Machine?
10) If yes, is her itunes account, etc. ready to use? Can she sync iphone as before?
Thanks.

I can make this easier for you:
1) Download and install SuperDuper.
2) Using SuperDuper, make a clone of the current internal drive to the large external.
3) Test the clone by booting to the external drive
4) If good, install the new internal drive.
5) Boot from external, and use SuperDuper in reverse (clone back to new internal).
6) When done, boot the mac normally. Upgrade to Lion, and all should be good.

Lenovo Yoga 11s SSD and RAM Upgrade - Great Results

Picked up a Lenovo Yoga 11s from Best Buy. I chose Best Buy for price, color, and processor. They had a slightly better deal than Lenovo.com. The clementine color looks great. Quality is great. I'm very happy with the purchase. It has the i5 processor, 4GB RAM, 128GB SSD.
I upgraded the SSD and RAM and found the upgrade relatively easy. Here is a basic step by step and results. (note the parts I chose increased the cost by close to $400. I chose these parts based on quality, performance, and power usage. There are cheaper alternatives, but I wanted an upgrade and money was not my concern.)
Upgraded Parts
RAM - Patriot Memory 8GB PC3-12800 1600MHZ CL11 1.35V - Purchased at Newegg, but could have saved a couple dollars on Amazon.
I chose this part based on previous experience with Patriot and the low voltage RAM. A lot of the RAM is higher voltage and I wanted to make sure I reduced heat and power usage. When you look for 1.35V RAM, there are not a lot of options...
MSata SSD Drive - Intel SSD 525 Series 240GB Drive
Intel SSD Page
I purchased through Newegg
I chose the Intel drive based on previous experience with Intel. They cost more, but I've found their performance to be good and reliability good. There is also a good review on this drive on Tomshardware Tomshardware Intel 525 Review. Toms review shows top performing drive and low power. I also looked at many other manufacturers and Intel had the lower power consumption. This means less heat and longer battery life.
Cloning Software
Intel provides a free cloning software from Acronis
My Digital SSD MSata external case
I purchased through Newegg.
Nice quality device. I used this to help in cloning the OEM SSD to the new Intel drive.
T5 Torx Screw Driver
I purchased this from Home Depot T5 Torx Home Depot
I read all the reviews, posts and issues around cloning the Win8 SSD drives. Many people have/had issues. I was prepared for problems. Another reason I chose Intel, as they have migration software that I felt would be top notch.
You need to have the Hardware Manual handy. I read how to remove keyboard and top cover. This is required to upgrade RAM and SSD. It was very easy. Take your time. Note, this is very different than the Yoga 13 youtube video for part removal. I think it's easier. Here is the link to download manual Yoga 11s Hardware Manual.
How to clone your SSD
I expect if you're doing this project you can learn how to use the Intel software for cloning. Read the web, watch their youtube video. Read the manual...
Remove your factory SSD and insert new Intel SSD (note, you must insert Intel drive in notebook for cloning. Do not try and clone on the USB external drive. Intel software will not detect drive properly). Create a bootable version of the Intel software on a USB drive. Install your factory OEM SSD in the external MSata SSD drive. Go to BIOS and set boot to support legacy, no fast boot, boot to USB.
Boot to the Intel Acronis app on the USB drive. Then connect your OEM SSD via second USB port.
Then follow the wizard on Intel's software. Cloning process took less than 5 minutes.
Unplug your USB devices, go to BIOS and set all all your boot settings back to factory UEFI, fast boot etc.
The PC booted to windows second try. The first time it said it has issues and went through a process to repair. It then said it failed. I rebooted again and it went straight to windows. Did all my windows updates and everything is fine.
Performance
Windows Performance Improvement
Memory - Factory score was 5.9 - Patriot Memory is 8.2 *** Nice Improvement
Hard Drive - Factory score was 6.2 - Intel 525 Drive is 8.2 *** Nice Improvement
This pc is crazy fast booting and shutting down. It boots in 7 seconds. Not sure it's really faster than OEM, but I've never seen a pc boot this fast.
Over all performance is fast. I installed Office 2010 pro from a USB drive in under 5 minutes. Web browsing is crazy fast. I'm super impressed with the speed of this pc. Much faster than I expected.
Size, Shape, Weight, color is great. Performance is great. Happy with upgrades and quality of parts. May be my best notebook purchase to date. I don't have any battery life numbers to report yet. Everything is new and I haven't really spent much time off the charger.
Issues I've experienced during this upgrade of parts
I first tried to clone the SSD drive by putting the Intel drive in the USB enclosure first. The intel software would not work as the PC detects the external SSD drive as a SCSI drive and Intel cloning software could not identify the drive as an Intel Sata drive. I called Intel and they had no advice or help. I also tried a few other cloning softwares that ultimately did not work. As a last resort I switched the drives and everything worked great. Lesson learned, swap the drives first and use Intel software to clone.
Factory restore - doesn't work. Not sure why the factory restore is not working on my new Intel drive. Windows works great! All the partitions are there. I suspect I messed up the OEM restore portion of the drive. At one point I thought I had booted to the Intel drive, and tried the restore (I had about 7 failed cloning tries before the final one worked as I outlined above). It went through the restore process and then failed. However, what I later found was that I had actually booted to the OEM drive in the external USB case and I may have corrupted the restore functionality.
I contacted Lenovo Support and explained I could not restore using the 1 key restore. They walked me through some basic troubleshooting and then opted to mail me factory restore disk. I have the disk and will keep them available for when/if I ever need to restore.
Solved!
Go to Solution.

I upgraded from the Yoga 13 to the 11S and am happy to report that the machines are so identical that apparently you can just yank the SSD from one and drop it in the other. I had upgraded my 13" to 240gB SSD + 8gB RAM and simply plopped the two components into the 11S and after about 30 seconds of Windows alerting me that it was 'setting up devices' the machine booted normally and has been working perfectly since!

My Mid 2009 Macbook pro (Just purchased) will not turn on after hard drive change and ram upgrade

So i purchased a mid 2009 Macbook Pro from a guy with 4 gb of ram and 250gb hard drive. It worked perfectly fine when i booted it with his hard drive and ram installed.
I spilled beer in my old computer (late 2009 15" 500gb hard drive and 8gb ram) but took the hard drive to get tested and it worked fine. i later found out it was from a 2010.
Like an idiot i assumed the pro i just purchased would be able to handle the same upgrades that were in my old computer so i threw in the 500gb hard drive (2010) and the 8gb of ram.
The thing booted up fine, just a bit slow which i chalked up to my hard drive sitting unplugged for a long time.
After about 3 minutes it crashed on me. Confused i replaced the 4gb of original ram back into it. (the 8gb ram was pny i bought from ebay so i thought it could be that) It decided not to turn on or show any lights on the front except for the battery meter.
After this i replaced the original hard drive and still NO LUCK!! im really mad because i am in desperate need of the information on my original 500gb hard drive and im afraid i have destroyed 2 computers and about $1K worth of cash out the window.
HELP please enlighten me on what i have done and if the situation can be fixed.

UPDATE: Problem solved with the old hard drive in it, Now the less pressing issue:
Will the computer run my 500gb hard drive with all my information on it? I need to forward a resume and it is on that hard drive.

HI, I HAVE A MacBook Pro 2.3GHz dual-core Intel i5 AND I WAN'T TO UPGRADE THE HARD DRIVE UP TO 750GB AND ALSO THE RAM MEMORY TO 8GB. WHAT SPECIFIC MODEL OF HARD DRIVE AND RAM MEMORY SHOULD I BUY??? THANKS

HI, I HAVE A MacBook Pro 2.3GHz dual-core Intel i5 AND I WAN'T TO UPGRADE THE HARD DRIVE UP TO 750GB AND ALSO THE RAM MEMORY TO 8GB. WHAT SPECIFIC MODEL OF HARD DRIVE AND RAM MEMORY SHOULD I BUY??? THANKS

No need to type in all caps - we HEAR you!
I would take a look at the internal drives offered by both Crucial (click the link "Internal Hard Drives Now Available") and OWC. I would stay away from Western Digital drives as they seem to have problems on a number of Mac models.
You can also shop for RAM at Crucial and OWC - just select the System Scanner tab at the Crucial website to find out which memory is right for your machine.
Good luck,
Clinton

Does it void my warranty to upgrade the hard drive and ram in a MacBook?

Recently a new store in my local mall called Peachmac opened. They do repairs and upgrades. I went there to see about a hard drive and RAM upgrade. They told me if I do it myself, it voids the warranty. I have about 8 months of Apple care left on my Mac and don't want to loose it. My real question is does it void your warranty even though the instruction booklet specifically tells you how to do it? The reason I'm wondering this is because they want $69 an hour plus money for parts. They quoted around $125-$150 (for a 500GB HD and 4GB of RAM). Is this an ok deal? Or should I go for an SSD? I saw Crucial was doing a bundle for a 128GB SSD and 4GB of RAM at my local CompUSA. Which one is a better deal? Thanks!

If you replace the memory, it doesn't void your warranty, but the warranty will be voided if you replace the hard drive

Kernel Power error after Win 7 and RAM upgrade

Hello,
I posted earlier on the subject of win7 and ram upgrades. I did both and it seemed to go fine. I did the ram first ... replaced a 667Mhz 1gb with a 800Mhz 2gb. A couple of days later the computer just shut itself down and restarted. Since then it has done it another 5 times, seemingly at random. Yesterday I decided to spend some time looking into it and found the 'event log'. All the shutdowns are recorded as 'critical'. A search on the web/here showed other occurences of the fault associated with drivers as much as anything.
After I did the win update I did update almost every driver with ones from this site.
Other than the shutdowns the only issues I have which are of very mild concern are the length of time the fingerprint reader takes to be present and that occasionally the cursor is unavailable for about a minute after logging on. When you try and control it it jumps about anywhere but where you want it to go. I rolled back the alps driver and that seems to have sorted the cursor issue.
So, details of the shutdown from the event log are as follows.
Log Name:      System
Source:        Microsoft-Windows-Kernel-Power
Date:          16/01/2011 16:21:31
Event ID:      41
Task Category: (63)
Level:         Critical
Keywords:      (2)
User:          SYSTEM
Computer:      (removed by me)
Description:
The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly."
There's more (I've shown it all below) but it's not that important. When I looked into it I found details of the problem on the microsoft knowledge base. Its described here http://support.microsoft.com/kb/2028504.
I believe I fit into scenario 3 for cause and resolution.
So, it seems that win7 and mixed speed ram may be a problem on some computers ... probably only a tiny number, but it looks like the HP3507 is one of them. I did see somewhere that I could down speed from 667 to 266 which might help with memory compatability but I can't see anywhere on the the insydeH20 bios where to do it. BIOS is version F18 .... upgraded from F15 as part of the Win7/RAM ugrade.
Before I swap back to the 'old' memory I'll see if anybody here can come up with any ideas. It may be that I have to sell off the expensive 2gb memory (ddr2 800mhz 200 pin) for £39.99 from maplin at a bargain price and get 2gb of 667Mhz from somewhere.
The full 'detail' regarding the fault is below.
Bye for now.
Phil
Log Name:      SystemSource:        Microsoft-Windows-Kernel-Power
Date:          16/01/2011 16:21:31
Event ID:      41
Task Category: (63)
Level:         Critical
Keywords:      (2)
User:          SYSTEM
Computer:      (removed by me)
Description:
The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly."
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-Kernel-Power" Guid="{331C3B3A-2005-44C2-AC5E-77220C37D6B4}" />
    <EventID>41</EventID>
    <Version>2</Version>
    <Level>1</Level>
    <Task>63</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000002</Keywords>
    <TimeCreated SystemTime="2011-01-16T16:21:31.187617000Z" />
    <EventRecordID>194889</EventRecordID>
    <Correlation />
    <Execution ProcessID="4" ThreadID="8" />
    <Channel>System</Channel>
    <Computer>Home_Laptop</Computer>
    <Security UserID="S-1-5-18" />
</System>
<EventData>
    <Data Name="BugcheckCode">0</Data>
    <Data Name="BugcheckParameter1">0x0</Data>
    <Data Name="BugcheckParameter2">0x0</Data>
    <Data Name="BugcheckParameter3">0x0</Data>
    <Data Name="BugcheckParameter4">0x0</Data>
    <Data Name="SleepInProgress">false</Data>
    <Data Name="PowerButtonTimestamp">0</Data>
</EventData>
</Event>

Hi DWeiland and Schwede,
Thanks for your replies. Yes I did the runtime engine registry change and also mass compiled the LV7.1 folder and my sourcecode. I still see the problem as I have set the LV adapter as Lv 7.1.1 runtime engine. Now I have changed it to LV7.1 development system. With this setting, it is not giving any error. Thus I don’t see any problem now. The older version of the code had the adapter as the runtime engine for some reason, now I have changed the setting to the development system. I hope that it shouldn’t be a problem.
Thanks again!
Thank you,
Sasi

Portege R500 fan spins up and freezes

Hi
I have a Portege R500 running windows XP. I seem to be having issues with the Fan spinning up really quickly and the Laptop then freezing. It sems to happen mostly when I remove the Cat5 from the nic and turn on the Wireless nic. Toshiba have replaced the Cooling Module for me. I'm not sure if the issue is hardware or software, the issue sometimes happens randomly but as above mostly when removing the Cat5.
Any help would be much appreciated.
Thanks

Hi all.
Thanks for the replies.
I have an image that I use, this image has been installed on 3 or 4 other Porteges and they have been fine. I have reinstalled the OS on this Laptop about 5 times, I have also tried Vista but get the same problem.
Sounds like it could be a Hardware issue then. Has anyone else experienced any issues like this?
I know the Laptops are small and the Airflow doesn't seem that great so it could just be over heating but as I say other machines are fine and the issue occurs mostly when the Wireless NIC is turned on.
Thanks for all the help so far.

I am looking to upgrade my macbook pro 13". I have a new logic board and have searched for the spec on this i.e. hdd size and ram. will my 2009 screen work with a updated graphics card ??

I am looking to upgrade my macbook pro 13". I have a new logic board and have searched for the spec on this i.e. hdd size and ram. will my 2009 screen work with an updated graphics card ??

Sounds just like what was happening with my Alum MB. I took it in and they replaced my battery. It seems to be ok now. I don't know what it is, but my battery was fine before 10.5.6 and the same timeframe of the firmware updates when they came out.
My battery health was jumping around but was fine before all of this happened. Unfortunately at 381 cycles I don't think you have much chance of getting the battery for free. Perhaps you can complain about the battery saying it was fine until 10.5.6 or whatever. Not sure when your computer was made, but perhaps you are eligible for this program: http://www.apple.com/support/macbook_macbookpro/batteryupdate/

Early 2008 Macbook Pro Should I upgrade to 6gb ram and SSD?

In the last few months, I've entered the world of 64-bit computing. I learned that this now means that my Early 2008 Macbook Pro, that has been fantastic and flawless for 6 years, needs an upgrade or replacement. I'm hard-hard stuck on whether I should upgrade it or replace it.
My current configuration is:
Processor 2.4 GHz Intel Core 2 Duo
Memory 4 GB 667 MHz DDR2 SDRAM
Storage 200 GB SATA Disk
I need to run OSX Mavericks and Windows 7 in VMWare or Bootcamp (I don't really like bootcamp).
I am eyeing two upgrades
1) Crucial 4GB Single DDR2 667MHz (PC2-5300) CL5 SODIMM 200-Pin Notebook Memory Module CT51264AC667
http://www.amazon.com/gp/product/B001RB21JY/ref=ox_sc_act_title_2?ie=UTF8&psc=1& smid=ATVPDKIKX0DER
2) Crucial M500 240GB SATA 2.5-Inch 7mm (with 9.5mm adapter) Internal Solid State Drive CT240M500SSD1
http://www.amazon.com/Crucial-2-5-Inch-adapter-Internal-CT240M500SSD1/dp/B00BQ8R M1A/ref=sr_1_10?s=pc&ie=UTF8&qid=1392961391&sr=1-10&keywords=ssd
My question is: Is it worth it for me max out my computer by upgrading again for $250? Will this hold me over for another 2-3 years, or should I look to replace?

Well, I have researched and researched and researched and come to a conclusion. I've compared many brand new replacement computers, and also reviewed my options for upgrading my computer. Upgrading to a new computer altogether, I have come across a few very attractive offers, but they're all in the $800+ price range.
I've decided that OSX Mavericks is my main issue. My early 2008 Macbook Pro was 100% perfectly sufficient for everything I needed it for when using OSX Snow Leopard. After the upgrade, VMWare Fusion runs like a sloth and everything else runs like a slug (maybe a slug that had a 5 hour energy...). Seriously. Just now, I am running Safari and MS Word while copying files to my backup drive. The beachball is all over the place, whereas the CPU is only at 15% use and RAM is at 3.97/4.00. I'm barely using the computer, and it's ridiculously hot and the fans are screaming.
First thing I'm going to do is 'upgrade' back to Snow Leopard to recover my RAM and regain the ability to effectively run my VMWare virtual machine. Then, I'm going to opt for the $100 upgrade to total 6GB of RAM and $150 upgrade to a SSD.

Portege R500 - Upgrade procesor and RAM

Similar Messages

Maybe you are looking for