Portege R600-Q10 and Port Replicator II

Hello! I have a small problem....I had Toshiba Porteble R500 and PRII but now I can't find this laptop in my country.
So I'm thinking about Toshiba Porteble R600-Q10 but i can't find does it work on PRII.
I know that PRIII is OK but I dont wonna buy new Port Replicator.....
Matt

I am afraid with this notebook model you can use slim port replicator III onlu.
Check it HERE .
http://laptops.toshiba.com/accessory/PA3681U-1PRP

Similar Messages

SP M10 and port Replicator

Hi !
Have a SP M10 and port replicator and before it switched the screen res. by it self. In the port replicator = 1200*xxxx, outside port replicator = 1600*xxxx. Now it don't switch bu it self. What need i do to make it work again. Hope you understand my question.
/Rob

Hi Rob
It is always very strange if someone write now it not works. Usually there must be some reason for this. Did you make anything or change some settings?
If nothing can help, try to reinstall Toshiba Mobile Extension utility.

Portege R600 / A600 and Dual Screen Output

Hi,
Could you tell me if it is possible to output to dual screens on the R600 or A600 with any of the Toshiba docking solutions?
I have been told it is possible however I was told today by Tosh sales that it is not possible to do. I'd like to do away with my home pc and office pc and just roam between the two with a notebook. However I do use an extended desktop on two screens and would need this to work.
Any advice on this?
Thanks,
Paul

Not sure if you mean two screens plus the laptop screen or two including the laptop, but If it's any help, I use a Slim Port Replicator with my R500 running Vista and have a second monitor plugged into its DVI output. The two screens work fine as an extended desktop.
I also find it useful to install Ultramon (http://www.realtimesoft.com/ultramon/). This adds a task bar to the second monitor.

X300: External Monitors and port replicator

The X300 looks really good, but when not traveling I'd be using it with a 24" 1920x1200 monitor.
A couple questions I can't see to find answers for:
1) Is the X300 capable of driving that resolution for an external monitor?
2) Assuming a good answer to #1, it seems like the new USB-based docking station has an resolution of 1440x or 1400x. Can the replicator be used, but skip using the video out and, instead, just use the video out from the X300?
Using the port replicator may not make sense that way since I might as well just plug everything in manually, but wanted to ask.
Thanks in advance for any help/clarity around this.

ed, it's an obvious question with a not-so-obvious answer. the specs actually come from intel's published info on the X3100 integrated graphics. for whatever reason lenovo doesn't list their systems' output capabilities in easily-accessible documentation. not even the X300 topseller announcement letter mentions display output. i've never understood this as it would clear up many customers' questions and uncertainties.
this makes a thinkpad's ability to output high resolution is a perpetually-confusing topic. to help put things in perspective, it takes only 12MB of video memory to drive 2048x1536 @ 32-bit and only 9MB to drive 1920x1200 @ 32-bit. the X300 with its ability to use up to 384MB of shared system memory can easily drive two displays simultaneously within the VGA limitations on each port; 2048x1536 on-board and 1400x1050 via the port replicator.
update: fixed typo.
Message Edited by erik on 05-05-2008 02:19 AM
ThinkStation C20
ThinkPad X1C · X220 · X60T · s30 · 600

T61 and port replicator with 2 monitors

I have a T61, 6460-66U, connected to a port replicator. My laptop stays closed and out of sight. I have a Y connector going from the analog video port to each of the LCD monitors. The displays work, but they are clones of each other. I want one to be the main monitor and the other to be the extended desktop. The video card in this T61 is a Nvidia Quadtro NVS 140M. Please help!

Guybak, welcome to the forum,
I'm not sure it will work with a Y connector. I've never tried it so you are more than welcome to prove me wrong
What will work is attaching one screen to the VGA and the other to the DVI on the Mini-Dock. You can then create a profile in Presentation Director where you must disable the ThinkPad screen in order for it to work. I decribed it in this thread, but unfortunately the member never came back to say it worked for them, I must presume yes.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Cannot connect 2 external monitors via port replicator using Portege Z30-16U

Hi All
I need hell I just moved from a other laptop to the Portege Z30-16U, I have spent hours trying to connect my 2 external monitors to my Hi-Speed Port replicator III 120W but my laptop will only see one monitor.
I have been using 2 external monitors with my laptop for yrs as I do a lot or reading and I do not want to use only one and the laptop screen.
I have tried VGA cables and mix of a VGA and a HDMI but nothing is working.
Can anyone tell me how I can connect and view 2 external monitors with this laptop and port replicator, I cannot believe it is not possible it would make no sense that Toshiba would be so technilogically behind other laptop manufacturers.
Thanks
Liga

Hi
I am not familliar with the Portreplicator of Z30, but the general behaviour of the dual-displayconnector replicators is that 1 can be used.
Not 2 simultaneously.
I may be wrong and you should easily be able to check this - use only 1 at a time.
First one, then the other.
If both works when used alone, then my suspicion is right.
Hope this helps!
BR TOm

Portege R600-11B - Cannot install Adobe Acrobat 9 - ActiveX issue

I have recently purchased a Portege R600-11B and have been trying to install Adobe Acrobat 9 on it by downloading from the Adobe site.
I have spent several unsuccessful hours talking to Adobe to try and resolve this issue.
They have concluded that my laptop is not compatible with the software.
This is not the case as this laptop exceed the systems specification required in all aspects.
The problem appears to be that it will not run ActiveX even after all firewalls and virus software in disabled - I don't really know what to do - does anyone have any suggestions please?

>They have concluded that my laptop is not compatible with the software.
Thats simply nonsense
The Adobe Acrobat Reader is a small application and can be installed on nearly all computers and systems So thats definitely not a reason why you are not able to install this software.
If this issue is related to the ActiveX then you could change this in your internet browser settings.
For example using the IE7 you could change this here:
Tools->Internet Options->Zones->{zone}->ActiveX controls and plug-ins->Allow previously unused ActiveX controls to run without prompt
You could also try to clean the OS and the registry because the issue could be related to the faulty registry entries.
For this I would recommend using the CCleaner free tool.
Last but not least its always advisable to check the support homepage of the software manufacturers. Here you can find some docs about installation issues with the Adobe Acrobat Reader.
http://www.adobe.com/support/reader/
Check it out!

Tecra S1 shuts down when using Port Replicator III

Hi,
Ive got a problem with a Tecra S1 Notebook and Port Replicator III. When I dock the Notebook onto the station, it turns immediately off. It doesnt matter if Im in Windows or not. The same Notebook works in a Port Replicator II without any problems. My first thought was, that the Replicator III may be damaged, but I testet it with another Tecra S1 and it worked! Can somebody help me with this???
Thx a lot!
Mathis

Hi,
is all responsible Toshiba software for the Port Replicator III installed in a right way or do you use it with the "old" versions from the Port Replicator II?
Try to update the software, tools and drivers from toshiba homepage! Then I think it should work!
Bye

Need Advanced Port Replicator III drivers to use it with my Portege M300

Hi,
I have a Portege M300 with an Advanced Port Replicator III. I've had to reinstall the operating system and now can't find any drivers for the port replicator.
Can anyone help me out? I'm running Win XP
thanks

Hi
I assume you need drivers for the XP OS. Am I right???
On the Toshiba driver page you will find all necessary drivers and utilities for Portg M300.
There you will find also the installation instruction document. This document shows the right installation order.
You should simply download all drivers and follow the installation order. Thats all

Is Advanced Port Replicator III plus compatible with Portege R200

I just ordered a new Portege R200 and the above port-replicator... however, I note that the R200 isn't listed in the supported notebooks list for that replicator! Can anyone confirm if I have made a mistake and need to change the order?
Will

I have visited the Options & Accessories area on the Toshiba European site and as you already said the Portg R200 is not listed in the list of compatible notebooks.
So I presume the Advanced Port Replicator III plus (PA3474E-1PRP) does not support the Protg R series.

Portege R500 - Slim port Replicator II: Dual Monitor DVI & RGB together

Is it possible to use a dual monitor setup on a slim port replicator II if I connect one monitor to the DVI-port and the other to the RGB-port?
I have a Toshiba Portege R500 notebook.
TIA

Hi
I didnt find any information regarding the Advanced Port Replicator II but I found some info about Advanced Port Replicator III and the simultaneous usage of RGB & DVI ports
So the point is that this is possible *BUT ONLY* if notebook system unit _itself also support_ RGB & DVI simultaneous usage.
regards

Portege R500: Which port replicator with DVI could be compatible

Hi,
Does anyone know which port replicator with DVI supports the portege R500 notebook.
When I look at the product and it's accessories no one of the port replicators lists the portege R500 as a supported notebook.
Perhaps there is not one as of now?

Hi
I also used the Toshiba Options & Accessories website for the searching and I found these parts:
- Dynadock - Universal USB Docking Station with Video (DVI) Phase 2 PA3542E-2PRP
- Slim Port Replicator 2 PA3603E-1PRP
- USB 2.0 Port Replicator II (Ethernet / EU Version) PX1173E-1PRP
If you need more details about these single devices then google simply for these part numbers.
Bye

Portege R700-14J - Compatible with Express Port Replicator II?

Today I received my TOSHIBA Express Port Replicator II (PA3680E-1PRP) to be used with my TOSHIBA Portege R700-14J (PT311E-023006DU). I seem to be unable to fit the notebook easily into the docking station.
Please let me knwo whether this port replicator docking station is *the right model* for the Portege R700-14J.
Thank you
Bert van Loon

Hi mostlymedia,
I have a little bit searched using Google and I found that Port Replicator II is compatible with Portg M750 and Tecra A/M/R/S Series but no information about Portege R700 :(
In my opinion you should ask the ASP in your country if its the correct part or not before you do something wrong.

Portege R930-1D0 + High speed port replicator II - dual monitor support

Hi
Running a Portege R930-1d0 through High speed port replicatior II.
Is it possible to output to dual displays?
Thanks

>So if I connect one monitor via VGA and another via display port I should get output to both monitors?
Well, usually it should be possible to use two external monitor simultaneously.
But Im not quite sure about the VGA/Display port combination because the VGA port supports analogue signal and the HDMI / Display port supports digital output.
However, it worth a check
Otherwise you could try to connect one monitor directly to the notebook and the other to port replicator.

Does Portege R700 support new high speed Port Replicator 2 PA3916E-1PRC

Will the new high speed Port Replicator 2 fit my R700?
It lists it as only compatible with the R830 series.
However the old R700 replicator works with the R830, so i kind of figured the new slimline effort would work with the R700 as well??
Anyone tried/know this?
Old one: PA3838D-1PRP
New one: PA3916E-1PRC
cheers
Ben

Hi
I found an info about Toshiba Hi-Speed Port Replicator II on the Toshiba Canada website:
http://www.toshiba.ca/web/product.grp?lg=en&section=1&group=2&product=11250
The Toshiba Hi-Speed Port Replicator II is compatible with:
Tecra R700, R940, R950, Portege R830, R930
Notes:
1. Speeds may vary
2. Ports supported may vary with notebook model; When notebook is connected to port replicator, it is recommended not to use the ports on the notebook
3. Dual VGA and HDMI display capability depends on notebook model
4. Gigabit Ethernet support only if notebook supports it

Portege R600-Q10 and Port Replicator II

Similar Messages

Maybe you are looking for