Portege R600 - SD Cards detected but can't browse or format

Hi
I have problem on my Portege R600-10U (Windows 7 Ultimate) with SD card reader. When I put SD card in to the slot it is detected by the system but I can not brows it nor I can do format.
I did installation of RICOH_Media_Driver_v2.07.01.00 from Toshiba support site but when I check driver for SD card reader it is showing some default generic driver from Microsoft.
Also I am not sure if that is important, but I can see sd reader on the list of devices only when I put card in to the card reader.
I even tried to do manual installation of driver by selecting extracted content of carc-20091103162555.zip (RICOH_Media_Driver_v2.07.01.00 folder) but windows didn't found any appropriate inf files in it.
Am I missing something, are there any prerequisite before I do installation of card reader driver or maybe card reader it self is not working properly.
Many thanks in advance,
Igor

I am trying to use Kingston class 4 SDHC with 4GB capacity. A far as I know r600 should be able to read it without any problem. Card it self is ok since I use it in my camera.
I don't have any warnings on device list with or without Ricoh media driver installed. When you check SD Host Adapters, you can see SDA Standard Compliant SD Host Controller and driver provider is Microsoft.
Problem is I am not sure where to look in order to see if Ricoh drivers are used and not some Microsoft default driver.
Cheers

Similar Messages

I plug my ipod into my computer itunes pops up with error message "Ipod detected but can't be identified properly" suggests I unplug and try again or uninstall itunes and reinstall nothing works. What should i do?

I plug my ipod into my computer itunes pops up with error message "Ipod detected but can't be identified properly" suggests I unplug and try again or uninstall itunes and reinstall nothing works. What should i do?

summarizing:
iPod nano (what version iOS BEFORE update?)
downloaded music
updated iPod to iOS 8.1.2
Windows 7 PC
plug-in iPod to PC
error message from iTunes on the PC "Ipod detected but can't be identified properly" ⬅[quoted from your original post] (+ suggested troubleshooting steps)
un-plug > re-plug iPod (how many times?)
iTunes un-installed from PC (?)
iTunes RE-installed to PC (?)
error message repeats(?)
searched "Ipod detected but can't be identified properly" site:support.apple.com with ZERO results - pretty strange that the support site wouldn;t know an iTunes generated error message (?) EDIT - had an "aha! moment when using a fresh Google search page and 'suggested' CANNOT
then "Ipod detected but can't be identified properly" site:discussions.apple.com had ONE result = Can't connect to iTunes with ipod touch (-50 error) - NO REPLIES
CANNOT instead of can't [ tsk tsk ]
iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support
follow all the instructions in order and let us know

I entered my credit card number but can't convert. Why???

I entered my credit card number but can't convert. Why???

the security code is on the back of your card underneath your signature

Geonei-A Detected but Can't Clean Up

Quarantine Manager indicates a threat on my Macintosh: Geonei-A.
However the "Clean Up Threat" button in Sohos is greyed out and not clickable.
The "lock" icon in the lower left of the Quarantine Manager ("Click the lock to make changes.") can not be unlocked. The "Action Available" message in the window states: The threat could not be cleaned up without authentication.
It can be cleaned up if you authenticate as an administrator."
Sorry but I don't know how to authenticate as an administrator. Any help would be appreciated. Thanks.

Quit the program, and open Sophos Anti-Virus from the Applications window in Finder. Then try and authenticate again - clicking the padlock will prompt for the same password you enter when installing software and unlock System Preference panels.
I'd recommend looking at the path and see if it mentions a Time Machine backup, email attachment, or is blank. Depending on where the item is SAV may have been able to 'read' the file and detect it, but can't access the folder to delete.

Ipad has been detected, but can't be ID properly

Ipad has been detacted by itunes, but can't be ID properly.

Are you Windows? Try disconnecting the device and reconnecting. Use a different USB port and make sure you are using a port on the computer - not a port on a hub.

HT3204 An ipod has been detected but can not be idenified

Help Needed....I have an issue with my iPod/iTunes. When I plug it in, iTunes pops up a message that says "An iPod has been detected but cannot be identified properly.". We have followed all the troubleshooting directions with no luck. Anybody?

We have followed all the troubleshooting directions with no luck.
Doublechecking. Have you tried a complete uninstall of both iTunes and all the other related software components and then a reinstall? If not, try the instructions from the following document:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

What are PC cards and where can I browse the choices?

I see that my PowerBook has a PC slot, but what kinds of cards go in there? What are the options? Where can I browse the choices?

I would be interested in the answer to this too.

Nokia 5800 connected to WLAN but can't browse the ...

wassup! peeps.
recently I can't browse the web or use any free messaging apps such as Nimbuzz on my nokia 5800 (fw version 21.0) finland made, but clearly indicates that it's connected to WLAN...the ones I used before (in my home & @ my work).
I noticed it started when I was waiting for a video in youtube to finish buffering, then halfway to it it suddenly went back to my main screen. when i tried again, same thing happens. then i try to log-in to facebook or any website... first it will give the impression that its connecting but then, juz a couple of seconds or less, it willl suddenly revert back to my phone home screen.
this started a couple of weeks back, and now the bluetooth too is f***ed-up!
because my laptop can't see it, while yesterday it can.
it seems that mines the first one with this kind of problem bcoz i can't find any forum discussing this issue.
anyone who can help will be worshiped forever...thanx!
Solved!
Go to Solution.

You could also try to clean privacy data inside the browser, and reset your device by taking out the battery for a couple of min and set it back again.
Last resort: Soft reset it by dialling *#7370# (this will delete contacts, messages and everything else on C, so make a backup using PC suite) and do a format of the memorycard. - Then you start out with a fresh device.

Wifi ipad2 can connect to wifi hotspot but can't browsing with wifi so what should i do?

sometimes ago i can browsing the internet with wifi, but now i can not browsing with my wifi.( wifi hotspot is the same not change) .
anyone can help me ?

Normally i compare to my friend samsang mobile me and my friend both are same place his mobile receiving signal 3point (signal range) but my iphone5s received only 1point(signal range)
You are posting in the Time Capsule area.. do you have a time capsule?
If not the question is better to ask in the iphone discussion area.
We cannot really make much comment on the iphone here as it is an area we specialise in Time Capsule problems.
If your phone is so poor compared to the samsung it sounds like you are using a non-apple router. Certainly the apple routers can have issues but there are some troubleshooting steps you can do.
Reset the TC (used for time capsule from now on) to factory, and use all short names, no spaces and pure alphanumeric. Set different names for 2.4ghz and 5ghz.
So TC name = TC
2.4ghz name = TC24ghz
5ghz name = TC5ghz
Use only wpa2 personal security with 10-20 character pure alphanumeric password.
Now test by manually setting channels, 11, 6, 1 in that order for 5ghz.
36, 40, 44 and 149 or greater for 5ghz.
Force the phone to join 2.4ghz rather than 5ghz for the best range.

WRT54G Can ping to outside world but can't browse internet.

I have a WRT54G wireless router. The wireless is working fine as I can communicate with the router admin area via a web browser. I can also send and receive packets by pinging a site - like www.google.com. The router is connected to a cable modem. If I plug my laptop directly to this modem (by-passing the router) I can browse the web no problem.
I have a network cable connecting the modem and router. If I unplug this cable the 'internet' light on the router goes out (indicating that it can sense the modem), when I plug it back in it goes on again. So everything seems fine. Only I can't browse the web or send and receive email through the router.
I have tried resetting the router to the defaults - all to no avail. It was working fine, then last weekend - without touching any settings, something changed and we were unable to browse as usual???
Any ideas? Thanks, Michael

If you are using Zone Alarm, right click on the ZA icon in the system tray (lower right corner of screen) and then click "Shutdown ZoneAlarm", and see if this fixes your problem. If this does not work, try the following with Zone Alarm: Open the ZAISS control center, go to Privacy, then temporarily turn off Ad Blocking and Cookie Control, and see if that fixes your problem.
If you are using Noton Internet Security with the Add-on Pack, be sure to turn off the Pop-up Blocker, and the Ad blocker. Some users have reported that they needed to uninstall the entire Norton Add-on Pack.
If you have neither, check what firewall or Internet security you have on your PC, Disable it and try accessing the Internet.Also adjust your IE browser settings.
Open an Internet Explorer browser page >>> Tools >>> Internet Options- On "General" Click on "Use Blank" button. Click on "Delete Cookies" and click on ok of the confirmation box. Click on "Delete Files" and check the option "Delete All Offline Contents" and click Ok- Click on "Clear History" as well. Then go to "Connections" Select "Never Dial a Connection". Click on the "LAN Settings button". Uncheck all the boxes
here and click Ok- Go to "Advanced". Click on the restore defaults button below and then click on Apply and then Ok.Close the IE and Reopen it again, Check if you have internet.

Hi, I recently got an iPad. I want to purchase software but I was prompted for a security code due to the fact that I am purchasing on a new device. I entered all my credit card details but can't even recall having a security code.

Please help. Because I wanted to purchase apps on my iPad after I have only used my credit card detail on my iPhone, I was requested to also enter some security code. I cannot recall what it is and now I cannot purchase any apps. I entered anything in the hope that some assistance to choose a new one will pop up but nothing. What can I do?

the security code is on the back of your card underneath your signature

SD card detected but not assigned a device

I have a Dell XPS 14 notebook which comes with a SD card slot. I plug in my SanDisk 8GB card from my camera and the following shows up in dmesg:
[821605.639247] mmc1: cannot verify signal voltage switch
[821605.750637] mmc1: new ultra high speed SDR50 SDHC card at address e624
And that's it. The card is not assigned to any device. lsmod seems to indicate that I have the required modules loaded:
± % lsmod | egrep 'mmc|sdhci|sd'
sd_mod 31361 3
rtsx_pci_sdmmc 13911 0
scsi_mod 132250 4 usb_storage,libata,sd_mod,sr_mod
sdhci_pci 12604 0
sdhci 28820 1 sdhci_pci
mmc_core 95465 3 sdhci,rtsx_pci_sdmmc,sdhci_pci
rtsx_pci 32305 2 rtsx_pci_ms,rtsx_pci_sdmmc
lspci also shows the SD card controller:
03:00.1 SD Host controller: Realtek Semiconductor Co., Ltd. RTS5209 PCI Express Card Reader (rev 01)
But fdisk -l just shows my hard drive
± % fdisk -l
Disk /dev/sda: 465.8 GiB, 500107862016 bytes, 976773168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Disk identifier: 0FBC37E2-A97E-4040-996C-F290C0C9CF0A
Device Start End Size Type
/dev/sda1 2048 1050623 512M EFI System
/dev/sda2 1050624 976773134 465.3G Linux filesystem
Anything else I need to do to get the SD card assigned to a device so I can mount it.

It's considered a removable drive. I have a USB card reader that if I insert it after the computer has been booted it gives me a little trouble, but having it inserted on booting it wants to put the device in a different order.

Satelite M300-D4316 - wireless network detected but can't connect

Previously I could use wireless LAN on my laptop but last week since I registered a bluetooth connection, wireless connection doesn't function anymore.
It can still detect wireless network around me; I fail every time when I try to connect, & it asks me to diagnose the problem & says something like 'signal is too weak'.
I'm pretty sure that it's not the problem of the wireless service- all my friends can connect to it!
What should I do?

Maybe the Wireless LAN was toggled off?
Try pressing Fn+F8 to toggle the Wireless Devices.
Also ensure the Wireless Switch is turned on at the front/side of the notebook.

Airport card working but can't connect to internet

hi all,
airport card (just plain airport card) is working and is connected to a verizon fios router. signal very strong. just can't connect to internet via safari, camino or firefox. running 10.3.9 os. i've rebooted twice to no avail.
altho, i can connect on my g4 powerbook using the same router.
why isn't the g4 flat panel imac connecting? any ideas?

In the Network system preference panel, is the wireless component
selected and in the list of items in the configuration the Mac sees?
You can drag the item(s) into preferred order of use, if there is more
than one, ie: dialup modem, ethernet connection, airport base.
If both computers have a similar operating system, it may be an
idea to look carefully into each, and not change anything in the
one which appears to work correctly; to look for differences.
Does the wireless router provide support for 802.11/b as well
as wi-fi 802.11/g? The older airport card runs on the older spec.

The answer has been found for "ipod nano has been detected but can not be identified properly."

After MULTIPLE ATTEMPTS of troubleshooting this problem (for days) another poster fixed her problem in a discussion she had started. It immdeiately fixed mine too. Instead of only uninstalling iTunes, uninstall EVERY Apple program on your computer. Go to Control Panel/Add-Remove programs. In the list of programs, click the "Publisher" column at the top to sort by publisher name. Then uninstall ALL of the Apple programs, including Bonjour, Application Support, Apple Applcation Support, etc. (They will all come back when you reinstall iTunes.)
Restart your computer, then reinstall iTunes. Like magic my Nano was repsonding like the good old days. It is happily staying connected and charging right now.
Please pass it on!

I have tried everythng on the help page on apple
Doublechecking. Have you also tried a complete uninstall of both iTunes and all the other related software components and then a reinstall? If not, try the instructions from the following document:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

Portege R600 - SD Cards detected but can't browse or format

Similar Messages

Maybe you are looking for