Portege R700 - fonts in main window of AuthenTec Truesuite has changed

Hello,
I have pre-installed on my Toshiba Portege R700 AuthenTec Truesuite version 3.0.1.149. After couple of days of good performance the font from the main window has changed becoming impossible to read. Probably I change some settings in Windows and also this font changed because for sure I did not change anything in your application. Having in mind that my OS is Windows XP Professional, SP3, pelse be so kind and help me with a solution to revert to standard fonts.
I have deinstalled application, cleaned registries, reinstalled application from software package downloaded from Toshiba site,
thank you,
Best regards,
Cristian

Can you please tell me which language do you use?
The whole story is somehow strange. I use Toshiba notebooks almost 10 years, have installed different stuff numerous times but I never saw something like this.

Similar Messages

Portege R700 - fonts in main Window has changed

Hello,
I have pre-installed on my Toshiba Portege R700 AuthenTec Truesuite version 3.0.1.149. After couple of days of good performance the font from the main window has changed becoming impossible to read. Probably I change some settings in Windows and also this font changed because for sure I did not change anything in your application. Having in mind that my OS is Windows XP Professional, SP3, pelse be so kind and help me with a solution to revert to standard fonts.
thank you,
Best regards,
Cristian

Hi
I assume you are speaking about the fonts in the Internet Explorer window.
Right?
Please check the option View in the menubar. Zoom should be set to 100% and Textsize should be set to medium.
Furthermore you can check the settings in control panel -> display -> Appearance tab
There you will find option called Font size. In my case its set to Normal.
Try it out.

The font on my internet browser and mail has changed. How do I change it back to a standard font?

The font on my internet browser and mail has changed. How do I change it back to a standard font?

Assuming you're using Safari, with Safari running open Safari's Preferences (Preferences in the Safari menu). Go to the Appearance tab, and set the ones you want.
Assuming you're using Mail, open Mail's Preferences (Preferences in the Mail menu). Go to the Fonts & Colors tab, and set the ones you want.

Portege R700-17Z - Upgrading to Windows 7 64bit

Hi,
I currently have a Toshiba Portege R700-17Z.
I want to increase the amount of RAM from 2GB to 8GB, and as a result I want to run Windows 64 bit. I was planning on running a clean reinstall, but is 64 bit Windows built into this machine? Or will I need a separate disk?
If I need a separate disk, any ideas on how to do this without an optical drive?
Many thanks!

At first info about RAM upgrade: You are right. You can upgrade your Portege up to 8GB and compatible 4GB modules have part number PA3677U-1M4G.
According notebook specification your Portege was delivered with WIN7 32BIT PROFESSIONAL but it is supported for Win7 64bit. 64bit drivers and Toshiba specific tools and utilities can be downloaded from Toshiba download page.
What is your decision now? If you need some assistance with OS installation let us know.

Mavericks After Upgrading to 10.9.2 the font size in the address/seach bar has changed to be small.

After upgrading to Mavericks 10.9.2 the text in the address/seach bar on Safari is a lot smaller. This is not a screen resolution issue. The fonts in Finder are larger than they were before anoying fix for this would also be nice. It is also not a screen resolution issue.
I really do not know what Apple are doing with quality control with Mavericks. The 3 month GMAIL problems have not been fixed with this upgrade and you also have a lot of font size changes accross you whole machine, within mail, finder and safari.
Any help appreciated.
Mark
Message to Apple:
Mavericks reminds me of all the old problems I had with Windows before I moved to Mac. Prior to Mavericks upgrades would not change screen resolutions, Font sizes etc. The GMAIL issue has not been fixed.
It is inconceivable to me that you could release this product which does not support basic mail functionality for one of the largest email services on the internet ie. GMAIL and then take 3-4 months and still not fixed with the 10.9.2 upgrade. What are you guys doing. The loss of productivity for people is beyond comprehension.
Can we please get a fix for GMAIL in Mavericks that actually works.

avjebs wrote:
I got this e-mail from WD a few days ago:
Dear WD Registered Customer,
UPDATE: November 1st, 2013
As a valued WD customer we want to make you aware of new reports of Western Digital and other external HDD products experiencing data loss when updating to Apple's OS X Mavericks (10.9). WD is urgently investigating these reports and the possible connection to the WD Drive Manager, WD Raid Manager and WD SmartWare software applications. Until the issue is understood and the cause identified, WD strongly urges our customers to uninstall these software applications before updating to OS X Mavericks (10.9), or delay upgrading. If you have already upgraded to Mavericks, WD recommends that you remove these applications and restart your computer. If you have already upgraded to Mavericks and are experiencing difficulty in accessing your external hard drive, please do not save anything to the drive, disconnect the drive from your computer, and contact Western Digital Customer Service at http://support.wd.com/country/ for further assistance.
The WD Drive Manager, WD Raid Manager, and WD SmartWare software applications are not new and have been available from WD for many years. However, solely as a precaution WD has removed these applications from our website as we investigate this issue.
Sincerely,
Western Digital
THIS is very disturbing news from WD.

Has there been updates to transcription support in a PS 4 Windows Update? Behaviour has changed...

I utilise PowerShell transcription support heavily in my PS scripts. Essentially I utilise transcription as a replacement to having a logging framework - all logging is performed via Write-Host, Write-Verbose and Write-Debug calls, and then logged to file
via a call to Start-Transcript at the start of script execution.
Transcription support in PS versions prior to 5 is limited in that it is hard coded in the Start-Transcript and Stop-Transcript commands to throw an exception if the host is not an instance of Microsoft.PowerShell.ConsoleHost. Also, to make it even more difficult,
Stop-Transcript throws an error when there is no active transcript; but there is no way to detect if there is. Therefore, I use reflection to get the ConsoleHost.IsTranscribing internal property value to determine whether to call Stop-Transcript at script
completion. This logic has worked fine for PS versions 2, 3 and 4. However, more recently I believe a Windows Update patch has changed the way the transcription works. It appears that PS 4 now supports transcription functionality that I thought was PS 5 (CTP)
specific - nested transcription sessions (i.e. you can now continually call Start-Transcript and it will create more sessions, rather than throw an error when there is an active session). Also, the internals of how transcription is managed must have
changed because the IsTranscribing property no longer returns the correct value. I am unsure if there is now a "supported" way of checking for this rather than hacking into the internals of the host. This change results in my script creating multiple
transcription sessions as it does not know there is already transcription started.
Does anyone know if there has been any updates in PS 4 for the transcription functionality? Or any other details regarding this?
Cheers

Hi Anna,
Thanks for the response. Can you make sense of the info below? Transcription appears completely broken
on the build on my machine, which I have not installed any PS CTP on. I am worried a hotfix such as KB3000850 which has also caused me the grief here:
https://social.technet.microsoft.com/Forums/windowsserver/en-US/eaa4a532-5ff5-4a2f-89ce-7e72c71a8fb7/powershell-30-stuck-in-infinite-loop-resolving-members-internally-is-this-a-ps-bug?forum=winserverpowershell
https://connect.microsoft.com/PowerShell/feedback/details/1045858/add-member-cmdlet-invokes-scriptproperty-members-when-adding-new-member
...has been installed via Windows Update. I am running Windows 8.1 and all latest updates applied as at 23 April.
My $PSVersionTable is the same as yours except for "BuildVersion" 6.3.9600.17400. I can also call Start-Transcript continually and it will keep creating sessions. Once I do this all sessions receive data once I
enter more commands in the console (i.e. each file is getting the same data). This is the behaviour I would have expected in PS 5 with the transcription updates, but not in a PS 4 update.
NOTE: In addition to this, the data being fed into the transcription file is NOT the same format as the standard transcription format. The transcription file contains different data and
is not a true reflection of what is on the console). The following data is being output to the transcription file after each command:
CurrentMatchIndex              ReplacementIndex             ReplacementLength CompletionMatches
                           -1
0                             8 {System.Management.Automat...
In addition to that (I haven't had a chance to look into this in detail), but the log files that are being generated by the PS module I have written are now containing a heap of contents that appear to be generated each time an exception
is thrown (even if it has been caught?)
"PS>TerminatingError(Invoke-Expression): xxxxxxx" and
"PS>TerminatingError(): "The pipeline has been stopped.""
messages, but no host, verbose, or debug data (i.e. terminating error details only, which I have never seen in the transcript file before). That's correct -
the transcription file doesn't contain any of the data it used to, just error info that did not used to be in there!!
Please assist urgently, this is a critical issue for me.

Portege R700 - Need drivers for Windows 7 32bit

Hi there
I have the new R700 that I am developing a Windows 7 Enterprise build for and I cannot find the driver files or correct install programs for the 32bit version of the TOSHIBA Fingerprint Utility. I found the download for the R700 on the US site, and while this installs, it does not have the 32bit driver for the Fingerprint Scanner in the R700. Can someone either direct me to the correct download, or post the x86 download on the NZ site?
BTW - the x64 download works fine if I install Windows 7 Ent x64 and install it.
Model number = PT311A-00J00Q
Component = Authen Tec Inc. AES1660
PCI Device ID = USB\VID_08FF&PID_168B
Thanks

Yeah I checked the European site too, and it had the exact same files as the US site. The AUS\NZ sites have nothing except a BIOS update (as you saw), and the x86 TFPU from the US and UK sites does not work - it does not have the correct PCI\VEN device id in the driver inf file.
In the meantime, while I was fiddling with the x64 build I noticed the x64 driver package has an x86 folder, and in there is the correct driver for the x86 build - which is just bizzare in my opinion. Why put the x86 driver in the x64 download package?
So I installed that on the Win 7 x86 build, and viola - the drivers are installed and everything works.
Now my problem is that I cannot silently install the TFPU without it rebooting. If you just run the setup, it installs then prompts for a reboot. If you use the /silent install switch it reboots automatically. Are there any other install switches I can use before I repackage this app to work correctly?
Thanks

Portege R700 - Enrolling Fingerprints on Windows 7

I have been having issues trying to get the Fingerprint Utility to work on my new test laptop. I have created a new SCCM build and associated task sequence which includes the utility.
However when I launch the Fingerprint Utility for the first time the finger prompt pops up which I can't bypass to register any finger prints?
I am using the version 1.0.2.32 on Windows 7.
Any help greatly appreciated.

Did you read fingerprint setup details in the user manual mate?
In use, the fingerprint authentification system will use the same username and password as defined within the windows OS. If no windows password has been configured, you must do this before starting the fingerprint registration process.
Click on Start -> All Programs -> Toshiba Utilities -> Toshiba Fingerprint Utility of click on icon in the taskbar.
The enroll screen is displayed. Enter the current account password on the windows password field. If no windows password has been configured, you will be asked to configure the logon password. Then click next.
Click the non-enrolled finger icon above the finger you want to register and then click next
The note go enrollment operation screen is displayed. Conform the message and then click next.
Then the scanning practice screen is displayed. You are able to practice swiping (three times) your fingers to ensure you use the correct method. When you finished, click next.
Swipe three times with the same finger. If succeeds, message will appear. Then click OK
Further details you will find in user manual page 82

I read the info on TBird opening messages in tabs. I set it to open in main window, but it hasn't changed. Is there another solution?

I could not understand the info on the action of tabs. I followed instructions to set "open in existing window" but messages still show up in tabs along the top. I have trouble finding my inbox. Thank you, Martha

If you select Open in an Existing Message window, the first message that you double click to open will always open an new window. If you leave that window open and double click a second message it will open the new message in the existing message window.
If you select Open in a New Window, every message that you double click will open a new window. If you do not close the windows after reading the messages you will be right where you are when you neglect to close the tab after reading the messages. You will have every message that you have read open in a tab and the Inbox tab gets pushed off the screen.
'''Close the tab or window after reading the message.'''
If you have lots of tabs open you can '''right click''' one of them and select '''Close Other Tabs''' and then use the x on the last tab to close it.
This will also close the tab with the Lightning calendar in it so you will need to reopen that.
Have you tried using the Message Pane to read the messages and not open them at all? F8 will toggle the Message Pane on and off.

Upgraded to Firefox 5. Bookmark window and selection process has changed -Scrolling response is too sensitive

Upgraded to Firefox 5. Bookmark folder content display and selection process is now different than last version. It is difficult to scroll down my bookmark files, as the v5 now INSTANTLY opens a file if you ever-so-slightly slow down as you approach the file you want to open.
Please supply new instructions for bookmark selection - Or fix it.
I will switch browsers while waiting for fix (Is it possible to go back to previous V of Firefox?)
Computer - MacBook - 2010 version
OSX 10.5.8

I have this same problem on my MacBook Pro. I'm disturbed that suitable quality control was not conducted before an upgrade was deployed that created this problem with a very fundamental function of the browser.

Smartforms-To change table display(in main window) dynamically

Hi,
In Smartforms - Main Window - Table
I have to change the Record display dynamically,
like Ex - I have sale order display at item level, First SO has three item, Second SO has ten item.
So, at run time - I want First SO on First page & Second SO on Second page.
(Similar like - PROTECT - ENDPROTECT in script)
How can I do this in Smart forms?
Regards,
Ashlesha

Hi Ashlesha,
              The protect and endprotect command in sapscript doesn't work with smartforms.
              The usage of protect and endprotect can be brought about in Smarrtforms is by using a folder node and checking the 'PROTECT' checkbox, everything in that folder will be page protected.
               This is actually called 'Page Protection'.
Best Regards,
Shree Tejus.

How to change the default window size display font size on Lync 2013 main window?

Hi champs,
Just a simple non-technical question: How to change the default window size display font size on Lync 2013 main window on Windows 7 desktop?
Thanks,

Hi,
Did you mean change the Lync: Change the Default Font and Color of Instant Messages just as Edwin said above?
If not, as I know, there is no natural way to change it.
If yes, on the latest version of Lync 2013 client, there is a new option “IM” on Lync client “Options” list. And you need to change the default Font and Color of IM in the interface of “IM”.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

I open iWeb but the main window doesn't open/appear on screen. The little windows like the inspector and font windows appear. Can anyone help?

I open iWeb but the main window doesn't open/appear on screen. The little windows like the inspector and font windows appear. Can anyone help?

Try the following:
1 - delete the iWeb preference file, com.apple.iWeb.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete iWeb's cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iWeb folder (Snow Leopard and Earlier).
3 - launch iWeb and try again.
NOTE: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
OT

Smartforms-Dynamic Change of Font Size in main window

Hi Friends,
How shall I be able to change dynamically the font size in main window of smartform. If the records are more in main window then the layout comes in 2 pages but if less in 1 page. So I want to decrease the font if the records are more to assign it in 1 page.
Eg : I can print only 10 lines in 1 page of main window, but if the records exceed 10 lines it is going to next page, so I want to shrink the font size to maintain the layout in 1 page.
Thanks & Regards,
Somen
Edited by: Das_SAP on Jun 23, 2009 7:59 AM

Hi,
SmartForms does not offer the option to set some characteristics at runtime. You must work with conditions in your form.
First find out how many records you have in your table
DESCRIBE TABLE mytable RECORDS sy-tfill.
You create 2 texts nodes with the text to be output and assign the font and font size to them. Obviouly, one node will have a big font size and the other one a normal font size but both contain the same information and same variables.
You can now work with an alternative. If the condition (there are many records for a secondpage) is true, assign text node with normal font size to option TRUE and the other text node to FALSE.
Optionally, every text node has folder CONDITIONS, where you can say
SY-TFILL > 10 lines <-- for text node with normal font size
SY-TFILL <= 10 lines <-- for text node with big font size

Steam main window font issue

hello everyone,i have some problem with steam，in steam main window ,the Chinese fonts does not display correctly,i have install all the microsoft-fonts and the wqy-zenhei font as the wiki said.
but it still not work for me.
here is the image:
http://ww2.sinaimg.cn/large/6d31b5b4gw1 … 0icjum.jpg
moderator edit: Welcome to the forums. The image is too large. Please use thumbnails. See Forum Etiquette: Pasting Pictures and Code. Thanks. --fsckd
Last edited by fsckd (2014-01-29 13:49:11)

Hi,
Dont delete the text elements, Instead comments the lines below the text element.
/E SHIPMENT_HEADER
/E SHIPMENT_DET
Regards
Praveen

Portege R700 - fonts in main window of AuthenTec Truesuite has changed

Similar Messages

Maybe you are looking for