Portege R700 - original recovery image re-installation failed
Hello
I have a Toshiba Portege R700 for years.
As i already have some trouble, i did a reinstallation few years ago, from recovery partition. Directly.
But, few days ago, i had some issues with my portege.
HDD seems to be broken as it make some noise and was really, really, really, ..., really slow.
So, after making some data backup during hours and hours (remember, it was really, ..., really slow), i lauch a complete re-installation from "recovery partition". It seems to be good, but .. never finished the process, with same HDD noise, and again slow HDD I/O.
OK, my own diadnostic: change HDD.
This done, and using the Toshiba recovery DVD just bought (yes impossible to find the earlied burn DVD), i have ... the same issue. The recovery process does not end even if 'im waiting for days ...
And i have the same HDD noise. With the new one!!
So having a MSDN licence, i installed a Win7 Pro 32bits, but not the Toshiba one.
And it's running for days without any issue!
But i have to reinstall all drivers, and software delivered by Toshiba.
Obviouly i will prefer to find what is the exact issue with this Portege, and reinstall the Toshiba version of Windows 7 Pro.
So, if someonre read the story until, the question is: ANY IDEA?
How to make a HW diagnostic? How to identify the exact problem?
Thanks for your help.
Jol
Hi Dr Lamp.
Remember that i
- did a successfull recovery from recovery partition few years ago
- tried 2 recovery recently
try 1, from recovery with initial HDD.
I'm not REALLY sure, but i think that the recovery failled during step "recovery image installation from copied data step 50/52"
I'm not sure.
As it take hours during this step, if it go to the next step or not, as i let it run for hours and hours (yes, i'm persistent)
try 2, from original Toshiba DVD i ordered (35)
I'm sure it fail during an additionnal step you forgot.
Because after "installed OS will be prepared for usage", which configure a lot of things using numerous reboot, there is the final step which is "first launch of win7"
Note that not the exact term, but is something like that.
Thanks for your help
Jol
Similar Messages
-
Portege R700-15L - recovery disc needed
Hello all
I have huge problem with my laptop. My hard drive was damaged, of course, I forgot to create a recovery disc on DVD, and now I lost it.
In this situation, from where I have to get a new one. Whether it is at all possible.
Thanks in advance for any help.
SzulborCheck please https://backupmedia.toshiba.eu/landing.aspx
There you can order recovery disc if they are still available. -
Adobe Premeire Pro Installation Failed - Application Manager Corrupted. Please help!
Hello all,
I just recently purchased a subscription license for Adobe Premeire Pro CS6, and tried to download it following the instructions in the confirmation e-mail. After installing the application manager and downloading, extracting, and installing the program, I received the error message seen in the image below, "Installation Failed - Adobe Application Manager is corrupted and must be reinstalled".
So of course I googled it, and found that this was a pretty common problem, and found one site that recommended re-installing the AAM with the following link:
http://helpx.adobe.com/creative-cloud/kb/download-error-403-launching-aam.html
So I did that too. In addition to restarting my computer, and also tried to download the program directly bypassing the AAM following the instructions on this page:
http://prodesigntools.com/adobe-cs6-direct-download-links.html
All of which was unsuccesful. I've got a video for my Mom's 60th birthday that I HAVE to complete this weekend, and Adobe's support is closed on the weekends. I didn't think installing something from a company like Adobe would be this difficult. Makes me wish I had a Mac. Can anyone PLEASE help me get Premeire (and Encore) downloaded and installed?
Any help would be hugely appreciated. Thanks,
Erik
(Some basic tech info: Windows 7 Home Premium x64, Mozilla Firefox, and a beast of a gaming rig that should be able to handle a simple Adobe installation)Hi Jeff,
I am experiencing the same exact problem and am unable to resolve it. I've called Tier 1 support (Indian Call Center), and went through all the steps that I have already done myself (as outlined above) with no luck. I'm still getting the corruption error.
I am using Parallels Workstation Extreme and it is being installed on a Virtual Machine. The "Extreme" part of Parallels Workstation allows me to assign a discrete graphics card to the VM. This is uing Intel's vt-d technology for Directed IO. You mentioned above that you had fired up an instance of Windows 7 64-bit and it worked just fine. But for some reason, I am unable to duplicate the same success. The case is now being escalated to "higher" support. Here is my setup:
- Parallels Workstation Extreme VM - Windows 7 64-bit
- Subscription to Creative Cloud
- Clean Install does not work
- Not a part of any domain, just workgroup
- Home PC, so it connects directly to a router and then to Cox (ISP)
- Has direct assignment of a Network card, meaning the network card is not a bridged connection (the VM gets it's own NIC)
- User account is already Administrator, but tried to "Run as administratot" with no luck.
- After install on the clean Windows didn't work, tried using the Adobe Cleanup Tool - doesn't work either
- Disabled all start up programs from msconfig - doesn't work
- Verified that the (.exe) does work, but coping the same (.exe) to another computer and it works.
I would really appreciate any advice that you may have!
Thanks Jeff!
Here is what I am seeing from the log:
02/24/13 20:50:36:197 | [INFO] | | UPDATER | CORE | | | | 3296 | >>> Adobe Updater Log Begin >>>
02/24/13 20:50:36:197 | [INFO] | | UPDATER | CORE | | | | 3296 | UpdaterCoreImpl::InitLogFile : Application Version 7.0.0.42
02/24/13 20:50:36:197 | [INFO] | | UPDATER | CORE | | | | 3296 | UpdaterCoreImpl::InitLogFile : cmdline option --> -logFile = C:\Users\Administrator\AppData\Local\Adobe\AAMUpdater\1.0\aamu.log
02/24/13 20:50:36:197 | [INFO] | | UPDATER | CORE | | | | 3296 | UpdaterCoreImpl::InitLogFile : cmdline option --> -logLevel = 2
02/24/13 20:50:36:197 | [INFO] | | UPDATER | CORE | | | | 3296 | Stepped into << UCInitialize >> call
02/24/13 20:50:36:214 | [INFO] | | UPDATER | CORE | | | | 3296 | UpdateTracker::CheckSignature(): Missing CSUTracker.xml. Checking if it is updater's first run..
02/24/13 20:50:36:260 | [INFO] | | UPDATER | CORE | | | | 3296 | UCInitialize : AAM is launched via CCM.
02/24/13 20:50:36:261 | [INFO] | | UPDATER | CORE | | | | 3296 | Stepped into << UCSetUpdateEnginePath >> call
02/24/13 20:50:36:303 | [INFO] | | UPDATER | CORE | | | | 3296 | UCSetUpdateEnginePath : WARNING - Update engine executable signature is not valid = C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\core\..\CCM\..\UWA\Adobe Application Manager (Updater).exe
02/24/13 20:50:36:303 | [INFO] | | UPDATER | CORE | | | | 3296 | Returning from << UCSetUpdateEnginePath >> call error = 26 retVal = 0
02/24/13 20:50:36:303 | [INFO] | | UPDATER | CORE | | | | 3296 | UCInitialize: Failed to set update engine path
02/24/13 20:50:36:303 | [INFO] | | UPDATER | CORE | | | | 3296 | Returning from << UCInitialize >> call error = 26 retVal = 1
02/24/13 20:51:34:421 | [INFO] | | UPDATER | CORE | | | | 1392 | >>> Adobe Updater Log Begin >>>
02/24/13 20:51:34:422 | [INFO] | | UPDATER | CORE | | | | 1392 | UpdaterCoreImpl::InitLogFile : Application Version 7.0.0.42
02/24/13 20:51:34:422 | [INFO] | | UPDATER | CORE | | | | 1392 | UpdaterCoreImpl::InitLogFile : cmdline option --> -logFile = C:\Users\Administrator\AppData\Local\Adobe\AAMUpdater\1.0\aamu.log
02/24/13 20:51:34:422 | [INFO] | | UPDATER | CORE | | | | 1392 | UpdaterCoreImpl::InitLogFile : cmdline option --> -logLevel = 2
02/24/13 20:51:34:422 | [INFO] | | UPDATER | CORE | | | | 1392 | Stepped into << UCInitialize >> call
02/24/13 20:51:34:445 | [INFO] | | UPDATER | CORE | | | | 1392 | UCInitialize : AAM is launched via CCM.
02/24/13 20:51:34:446 | [INFO] | | UPDATER | CORE | | | | 1392 | Stepped into << UCSetUpdateEnginePath >> call
02/24/13 20:51:34:496 | [INFO] | | UPDATER | CORE | | | | 1392 | UCSetUpdateEnginePath : WARNING - Update engine executable signature is not valid = C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\core\..\CCM\..\UWA\Adobe Application Manager (Updater).exe
02/24/13 20:51:34:496 | [INFO] | | UPDATER | CORE | | | | 1392 | Returning from << UCSetUpdateEnginePath >> call error = 26 retVal = 0
02/24/13 20:51:34:496 | [INFO] | | UPDATER | CORE | | | | 1392 | UCInitialize: Failed to set update engine path
02/24/13 20:51:34:496 | [INFO] | | UPDATER | CORE | | | | 1392 | Returning from << UCInitialize >> call error = 26 retVal = 1 -
just got a Nikon D610 and CS5 for Mac can't open the images -- message says installed version of camera raw doesn't support the camera. Downloaded the Raw 6.2 update for Mac, but installation failed. Now what?
The D610 didn't get out-of-the-box RAW support until Photoshop CC.
You can either upgrade to CC or use the DNG Converter to convert and open your DNGs in CS5. -
Yoga 13 Original Factory Image OneKey Recovery
Hello,
I have a Yoga 13 that I have modified quite a bit. I have repartitioned the drive, installed a clean version of windows and deleted the recovery image. I may have to send it in for repair (I am begininng to recieve phantom touch screen issues) and I want to bring everything back to 100% full factory settings.
I am still able to boot into onekey recovery, but it cannot find the original factory image (which makes sense). My question is two-fold:
1. Does anyone have a clean recovery file that I could use on my own computer to restore everything to factory settings? I am assuming that I can use another Yoga's image to do so.
2. If I am able to restore everything will it go so far as to repartition my main drive and get rid of any boot record changes I made? (These were done when I was dual-booting linux).
Thank you in advance for your help; Hopefully I am not totally mistaken in my reasoning/hopes/dreams.Hello all -
There are a few other threads on this topic with an abysmal response rate and very little useful help. I am going to post on this one more time in hopes that there is actually some kind of manual instructions that I could follow that would help ensure that my computer is not now permanently crippled. My story:
* Had one of the old Yoga's with the bad partition structure, and thus ran out of room on C:
* Ran the hotfix - it took 2 hours instead of 10 minutes and was completely stalled out so I killed it
* Tried to run a second time, and the partition structure had already been altered
* I ended up with a new, resized D: drive, another random unnamed drive, and a bunch of unallocated space
* After $30 for a third party application, I was able to allocate the unused space to C:
I believe that the process stopped before all relevant files could be transfered to the right partitions.
Incedentally, now when I boot, I get an alert that the Intel Smart Start-up doesn't work
OKR doesn't work - just the the error that the system can't do a back-up
Does anyone have a clue where are the files are supposed to end up after the Hotfix so I can get them to where they need to be to get all of this working again.
Would really appreciate all help. M.
Moderator Note; subject edited; post merged in -
GE60 2PE mSata failed / lost recovery image drive
Hey guys,
My laptop froze yesterday while I was using Windows 8.1 Upon restart it went straight to bios and I saw a message saying media not found or something to that effect. I would like to just reinstall a factory recovery image. Would there be s...If I just use afterburner to achieve the same overclock as the gaming app offers the boosts in gpu-z are correct except for the oc boost. So the default clock shows 1140/1280 in gpu-z
Then the GPU clock when OCing shows
MSI core overclock or gaming mod... -
Lion Server Recovery image is broken
I had purchased a new Mac mini Lion Server for my office. Normally I am a Linux server guy, but wanted everything to be 100% Apple for continuity. On first plugin, the server worked just fine. After I spent time learning it and it's settings and configs, I decided that I wanted to start fresh. So I used the recovery console to download the boot image from Apple and recover my Lion Server from scratch.
Upon a successful installation, I found that the Wiki and the Profile managers failed to operate. After a long story and chasing each individual error around Google, I decided to retry a new image again. So again I downloaded the recovery image and started over. Upon restart I found the same errors. For the longest time I assumed it was a sheeting that I was messing up and causing it. It had something the do with the Postgres database.
After 5 reinstalls I still had not a fully functioning server.
I had configured a MacBook air to remote manage the server by copying the server app to it. The Air also had Lion on it. I decided to try an experiment and installed Lion fromUSB instead, made from the Mac air. The installation went flawless. I then copied the server app over to my Mac mini server to complete the server functions. It also installed flawlessly. I had not touched a single setting on the new OS and the server functioned perfect.
My only diagnosis has to be that the original net install recovery image which is passed out from Apple's remote servers, is that particular image is broken. If you have conducted a server recovery from booting using apple's recovery system, and are having massive Postgres problems, failed wiki and profile manager issues, then consider that you have downloaded a bad image and create a new install from a local DVD instead.
Today my server runs perfect and has ever since I installed locally.Thanks and sorry for the super late reply! At the end I had to get a wifi router to get it restore! Since the mini came with Lion server, it won't let me use the thumb drive to install. I can see it if I press option on start up, but when I chose it, it gave me a "no entry" icon
Anyway, since the office needed a wifi router anyway, so ......... yeah thanks! -
Problem: “Installer failed to initialize. Please download Adobe Support Advisor to detect the problem”
Background: Windows 8 became corrupt and I had to perform a full Windows Recovery (the “Remove everything and reinstall Windows” type).
Current Situation: I am a Senior in College, have Summer finals this week, my Senior project due, I am behind on my job design work, and I am going crazy because I can’t find anything/anyone to help me.
Set Up: Lenovo Y410P, Windows 8.1, CS 5.5 Design Standard Student-Teacher Edition (Yes, I have the media and product code/license key, as I purchased a valid copy in my university student store).
Here’s what I have done over and over again for the last SIX WEEKS!
1. Attempts to install from the original install DVD result in the following error, “Installer failed to initialize. Please download Adobe Support Advisor to detect the problem”
2. [I click] Get “Adobe Support Advisor”
3. [I see mssg] The Adobe Support Advisor has been discontinued.. The tool has been replaced with [unnamed/unlinked] improved installation support mechanisms…
4. [I Run] “AdobeCreativeCloudCleanerTool” (see results below)
Note: I cannot run Windows Uninstall because, following Windows Restore, Windows doesn’t recognize that CS5.5 has been installed. I do still see the following folders in Windows explorer, but Adobe Support says "don't attempt to manually remove folders";
C:\Program Files (x86)\Common Files\Adobe\
\Adobe
\Adobe PCD
\Adobe Photoshop CS5.1
\Adobe Application Manager
\Adobe CerativeCloudCleaner Tool
\backup…
[Contents of] Adobe Creative Cloud Cleaner Tool .txt
[Fri Jul 11 22:50:30 2014] ---------------------------------------------------------
[Mon Aug 04 22:58:11 2014] ---------------------------------------------------------
[Mon Aug 04 22:58:11 2014] *=*=*=*=*=*=*=*=* :: Start Session :: *=*=*=*=*=*=*=*=*=*
[Mon Aug 04 22:58:11 2014] ---------------------------------------------------------
[Mon Aug 04 22:58:11 2014] Win OS Version: 6.2
[Mon Aug 04 22:58:11 2014] Cleaner Tool version : 2.0.0.0
[Mon Aug 04 22:58:11 2014] Cleanup source directory : C:\Program Files (x86)\Common Files\Adobe\AdobeCreativeCloudCleanerTool
[Mon Aug 04 22:58:11 2014] [AdobeProgramFiles] : C:\Program Files (x86)\Adobe
[Mon Aug 04 22:58:11 2014] [AdobeProgramFiles_x64] : C:\Program Files\Adobe
[Mon Aug 04 22:58:11 2014] [AdobeCommon] : C:\Program Files (x86)\Common Files\Adobe
[Mon Aug 04 22:58:11 2014] [AdobeCommon_x64] : C:\Program Files\Common Files\Adobe
[Mon Aug 04 22:58:11 2014] [UserRoamingAppData] : C:\Users\Kaylene\AppData\Roaming
[Mon Aug 04 22:58:11 2014] [UserLocalAppData] : C:\Users\Kaylene\AppData\Local
[Mon Aug 04 22:58:11 2014] [StartMenu] : C:\ProgramData\Microsoft\Windows\Start Menu\Programs
[Mon Aug 04 22:58:11 2014] [System32Folder] : C:\WINDOWS\system32
[Mon Aug 04 22:58:11 2014] [SharedApplicationData] : C:\ProgramData
[Mon Aug 04 22:58:32 2014] ---------------------------------------------------------
[Mon Aug 04 22:58:32 2014] *=*=*=*=*=*=*=*=* :: Start Session :: *=*=*=*=*=*=*=*=*=*
[Mon Aug 04 22:58:32 2014] ---------------------------------------------------------
[Mon Aug 04 22:58:32 2014] Win OS Version: 6.2
[Mon Aug 04 22:58:32 2014] Cleaner Tool version : 2.0.0.0
[Mon Aug 04 22:58:32 2014] Cleanup source directory : C:\Program Files (x86)\Common Files\Adobe\AdobeCreativeCloudCleanerTool
[Mon Aug 04 22:58:32 2014] [AdobeProgramFiles] : C:\Program Files (x86)\Adobe
[Mon Aug 04 22:58:32 2014] [AdobeProgramFiles_x64] : C:\Program Files\Adobe
[Mon Aug 04 22:58:32 2014] [AdobeCommon] : C:\Program Files (x86)\Common Files\Adobe
[Mon Aug 04 22:58:32 2014] [AdobeCommon_x64] : C:\Program Files\Common Files\Adobe
[Mon Aug 04 22:58:32 2014] [UserRoamingAppData] : C:\Users\Kaylene\AppData\Roaming
[Mon Aug 04 22:58:32 2014] [UserLocalAppData] : C:\Users\Kaylene\AppData\Local
[Mon Aug 04 22:58:32 2014] [StartMenu] : C:\ProgramData\Microsoft\Windows\Start Menu\Programs
[Mon Aug 04 22:58:32 2014] [System32Folder] : C:\WINDOWS\system32
[Mon Aug 04 22:58:32 2014] [SharedApplicationData] : C:\ProgramData
[Mon Aug 04 22:58:45 2014] Language selected: English
[Mon Aug 04 22:58:45 2014] Displaying the Adobe End User License Agreement
Gen_WWCombined-en_US-20121017_1230
[Mon Aug 04 22:58:45 2014] Please enter (y) for Yes or (n) for No. ... >>
[Mon Aug 04 22:59:12 2014] Choose from one of the following options to clean up :
[Mon Aug 04 22:59:12 2014] 1. All
[Mon Aug 04 22:59:12 2014] 2. Adobe Flash Player 10.2
[Mon Aug 04 22:59:12 2014] 3. Creative Cloud 2014 , Creative Cloud & CS6 Products
[Mon Aug 04 22:59:12 2014] 4. Creative Cloud 2014 only
[Mon Aug 04 22:59:12 2014] 5. Creative Cloud only
[Mon Aug 04 22:59:12 2014] 6. CS6 only
[Mon Aug 04 22:59:12 2014] 7. CS5-CS5.5-CS6
[Mon Aug 04 22:59:12 2014] 8. CS5-CS5.5
[Mon Aug 04 22:59:12 2014] 9. CS3, CS4
[Mon Aug 04 22:59:12 2014] 10. Adobe Id credentials
[Mon Aug 04 22:59:12 2014] 11. Quit
[Mon Aug 04 22:59:12 2014] Choice :>
[Mon Aug 04 22:59:32 2014] User selected: CS5-CS5.5
[Mon Aug 04 22:59:32 2014] Executed the command : call copy /Y "C:\Program Files (x86)\Common Files\Adobe\caps\pdb.db" "C:\Program Files (x86)\Common Files\Adobe\backup20140804T225932\pdb.db"
[Mon Aug 04 22:59:32 2014] Executed the command : call copy /Y "C:\Program Files (x86)\Common Files\Adobe\caps\Media_db.db" "C:\Program Files (x86)\Common Files\Adobe\backup20140804T225932\Media_db.db"
[Mon Aug 04 22:59:32 2014] DB does not exist at: C:\Program Files (x86)\Common Files\Adobe\caps\pdb.db
[Mon Aug 04 22:59:32 2014] DB does not exist at: C:\Program Files (x86)\Common Files\Adobe\caps\Media_db.db
[Mon Aug 04 22:59:32 2014] List of products installed on this machine
[Mon Aug 04 22:59:32 2014] Listing products for cleanup:
[Mon Aug 04 22:59:32 2014] Please enter the option number of the product you wish to remove; enter (q) to quit ... >>
[Mon Aug 04 22:59:50 2014] response 1
[Mon Aug 04 22:59:50 2014] Are you sure you want to clean all the listed products and associated files?
[Mon Aug 04 22:59:50 2014] Type (y) to confirm and remove or (n) to quit ... >>
[Mon Aug 04 22:59:55 2014] Please wait for Adobe Creative Cloud Cleaner Tool to finish........
[Mon Aug 04 22:59:55 2014] User selected: 'Clean All'
[Mon Aug 04 22:59:55 2014] *-*-*-*-*-*-* Start removing product : ALL *-*-*-*-*-*-*
[Mon Aug 04 22:59:55 2014] *-*-*-*-*-*-* Finished removing product : ALL *-*-*-*-*-*-*
[Mon Aug 04 22:59:55 2014] Action : Created the C:\Program Files (x86)\Common Files\Adobe\backup20140804T225932 folder as backup of PDB and MediaDB for this session.
[Mon Aug 04 22:59:55 2014] LOG FILE SAVED TO: C:\Users\Kaylene\AppData\Local\Temp\Adobe Creative Cloud Cleaner Tool.log
[Mon Aug 04 22:59:55 2014] Adobe Creative Cloud Cleaner Tool completed successfully
[Mon Aug 04 22:59:55 2014]
[Mon Aug 04 22:59:55 2014] *-*-*-*-*-*- ::START:: - SUMMARY OF Warnings -*-*-*-*-*-*
[Mon Aug 04 22:59:32 2014] DB does not exist at: C:\Program Files (x86)\Common Files\Adobe\caps\pdb.db
[Mon Aug 04 22:59:32 2014] DB does not exist at: C:\Program Files (x86)\Common Files\Adobe\caps\Media_db.db
[Mon Aug 04 22:59:55 2014] *-*-*-*-*-*- :: END :: - SUMMARY OF Warnings -*-*-*-*-*-*
[Mon Aug 04 22:59:55 2014] ---------------------------------------------------------
[Mon Aug 04 22:59:55 2014] *=*=*=*=*=*=*=*=* :: End Session :: *=*=*=*=*=*=*=*=*=*=*
[Mon Aug 04 22:59:55 2014] ---------------------------------------------------------\Users\[user name]\AppData\Local\Temp\ PDApp .log file contents (Here it is, not sure what to do with it, do you?)...
8/4/2014 22:47:03 [INFO] Setup - Build Version - 2.0.242.0
8/4/2014 22:47:03 [INFO] Setup - Logging Level verbosity Set to 4
8/4/2014 22:47:03 [INFO] Setup - Start Adobe Setup
8/4/2014 22:47:03 [INFO] Setup - TimeLog: Bootstrapper Start
8/4/2014 22:47:03 [INFO] Setup - TimeLog: Start initial checks
8/4/2014 22:47:04 [INFO] Setup - Dictionary Path: E:\Adobe CS5_5\resources\Dictionary\en_US\stringTable.zdct
8/4/2014 22:47:06 [INFO] PIM - Trying to access xml at path:E:\Adobe CS5_5\resources\setup.xml
8/4/2014 22:47:07 [INFO] PIM - XML is valid
8/4/2014 22:47:07 [WARN] PIM - Failed to find Node
8/4/2014 22:47:07 [INFO] Setup - Found 3 packages in setup manifest
8/4/2014 22:47:07 [INFO] PIM - Build Version - 2.0.242.0
8/4/2014 22:47:07 [INFO] PIM - Logging Level verbosity Set to 4
8/4/2014 22:47:07 [INFO] Utilities - Folder does not exist
8/4/2014 22:47:07 [INFO] PIM - Build Version - 2.0.242.0
8/4/2014 22:47:07 [INFO] PIM - Logging Level verbosity Set to 4
8/4/2014 22:47:07 [INFO] PIM - CREATE PIM Instance ...
8/4/2014 22:47:08 [INFO] Utilities - File does not exist
8/4/2014 22:47:08 [INFO] Utilities - File does not exist
8/4/2014 22:47:08 [INFO] PIM - trying to createOrUpdatePIMDbSchema.
8/4/2014 22:47:09 [INFO] PIM - SUCCESS Created Tables.
8/4/2014 22:47:09 [INFO] PIM - PIM Database is Up To Date.
8/4/2014 22:47:09 [INFO] PIM - Updater Inventory location:E:\Adobe CS5_5\resources\updaterinventory.dll
8/4/2014 22:47:09 [INFO] PIM - trying to createOrUpdatePIMDbSchema.
8/4/2014 22:47:09 [INFO] PIM - Current db schema version on machine 1.
8/4/2014 22:47:09 [INFO] PIM - Current db schema version to install 1.
8/4/2014 22:47:09 [INFO] PIM - PIM DB Schema is up to date. Current schema version is 1.
8/4/2014 22:47:09 [INFO] PIM - PIM Database is Up To Date.
8/4/2014 22:47:09 [INFO] PIM - Trying to access xml at path:E:\Adobe CS5_5\packages\core\PDApp.pimx
8/4/2014 22:47:09 [INFO] PIM - XML is valid
8/4/2014 22:47:09 [WARN] PIM - Failed to find Node
8/4/2014 22:47:10 [INFO] PIM - PackageCheck: Package id E09D47A9-4501-43C1-A50B-E264DB5E498D is a old Package, new is installed on the system. Size required: 924792
8/4/2014 22:47:10 [INFO] PIM - Trying to access xml at path:E:\Adobe CS5_5\packages\UWA\UWA.pimx
8/4/2014 22:47:10 [INFO] PIM - XML is valid
8/4/2014 22:47:10 [WARN] PIM - Failed to find Node
8/4/2014 22:47:10 [INFO] PIM - PackageCheck: Package id CC1D48BA-E659-42D4-9511-F208F19C3EDC is a old Package, new is installed on the system. Size required: 2335009
8/4/2014 22:47:10 [INFO] PIM - Trying to access xml at path:E:\Adobe CS5_5\packages\DWA\DWA.pimx
8/4/2014 22:47:10 [INFO] PIM - XML is valid
8/4/2014 22:47:10 [WARN] PIM - Failed to find Node
8/4/2014 22:47:10 [INFO] PIM - PackageCheck: Package id 4F576A64-1680-4E79-B4A2-CFAC1A841C06 is a old Package, new is installed on the system. Size required: 3525373
8/4/2014 22:47:10 [INFO] PIM - Trying to access xml at path:E:\Adobe CS5_5\packages\LWA\LWA.pimx
8/4/2014 22:47:11 [INFO] PIM - XML is valid
8/4/2014 22:47:11 [WARN] PIM - Failed to find Node
8/4/2014 22:47:11 [INFO] PIM - PackageCheck: Package id D2E20EE6-5E36-40A4-8CB2-EC0C2E0B6912 is a old Package, new is installed on the system. Size required: 6359429
8/4/2014 22:47:11 [INFO] PIM - PackageCheck: Extra Package id CEF79D2D-B768-4000-890A-749307FC1A88 found in ACF. Size required: 2716397
8/4/2014 22:47:11 [INFO] PIM - PackageCheck: Extra Package id CF544A33-B3C5-41EB-9A35-FF71EF87BD9D found in ACF. Size required: 237125
8/4/2014 22:47:11 [INFO] PIM - PackageCheck: Extra Package id E4D5C1B1-86EE-4912-BC83-DCF49C6DA758 found in ACF. Size required: 5275810
8/4/2014 22:47:11 [INFO] PIM - PackageCheck: Extra Package id 678DA613-34E3-4532-B6D4-E2C1D3D44A22 found in ACF. Size required: 6006309
8/4/2014 22:47:11 [INFO] PIM - PackageCheck: Extra Package id EC6B3460-5E27-4FD6-80F5-1EA03E45A6DA found in ACF. Size required: 5110
8/4/2014 22:47:11 [INFO] PIM - pim_haveEnoughDiskSpaceToInstallPackages reqSize ... 30123889
8/4/2014 22:47:11 [INFO] Setup - TimeLog: End initial checks
8/4/2014 22:47:11 [INFO] Setup - TimeLog: Begin Installing
8/4/2014 22:47:11 [INFO] Setup - Start Installing core package - E:\Adobe CS5_5\packages\core\PDApp.pimx
8/4/2014 22:47:11 [INFO] PIM - START installPackage at file E:\Adobe CS5_5\packages\core\PDApp.pimx
8/4/2014 22:47:11 [INFO] PIM - Trying to access xml at path:E:\Adobe CS5_5\packages\core\PDApp.pimx
8/4/2014 22:47:11 [INFO] PIM - XML is valid
8/4/2014 22:47:11 [WARN] PIM - Failed to find Node
8/4/2014 22:47:11 [INFO] PIM - srcPath :C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\/core/ destPath :C:\Users\Kaylene\AppData\Local\Adobe\OOBE\PDApp/core/
8/4/2014 22:47:11 [INFO] PIM - Function :copyPrimitive
8/4/2014 22:47:11 [INFO] Setup - Finished Installing core package - E:\Adobe CS5_5\packages\core\PDApp.pimx, Return status: 0
8/4/2014 22:47:11 [INFO] Setup - Start Installing package - E:\Adobe CS5_5\packages\UWA\UWA.pimx
8/4/2014 22:47:11 [INFO] PIM - START installPackage at file E:\Adobe CS5_5\packages\UWA\UWA.pimx
8/4/2014 22:47:11 [INFO] PIM - Trying to access xml at path:E:\Adobe CS5_5\packages\UWA\UWA.pimx
8/4/2014 22:47:11 [INFO] PIM - XML is valid
8/4/2014 22:47:11 [WARN] PIM - Failed to find Node
8/4/2014 22:47:11 [INFO] PIM - srcPath :C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\/UWA/ destPath :C:\Users\Kaylene\AppData\Local\Adobe\OOBE\PDApp/UWA/
8/4/2014 22:47:11 [INFO] PIM - Function :copyPrimitive
8/4/2014 22:47:12 [INFO] Setup - Finished Installing package - E:\Adobe CS5_5\packages\UWA\UWA.pimx
8/4/2014 22:47:12 [INFO] Setup - Start Installing package - E:\Adobe CS5_5\packages\DWA\DWA.pimx
8/4/2014 22:47:12 [INFO] PIM - START installPackage at file E:\Adobe CS5_5\packages\DWA\DWA.pimx
8/4/2014 22:47:12 [INFO] PIM - Trying to access xml at path:E:\Adobe CS5_5\packages\DWA\DWA.pimx
8/4/2014 22:47:12 [INFO] PIM - XML is valid
8/4/2014 22:47:12 [WARN] PIM - Failed to find Node
8/4/2014 22:47:12 [INFO] PIM - srcPath :C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\/DWA/ destPath :C:\Users\Kaylene\AppData\Local\Adobe\OOBE\PDApp/DWA/
8/4/2014 22:47:12 [INFO] PIM - Function :copyPrimitive
8/4/2014 22:47:12 [INFO] Setup - Finished Installing package - E:\Adobe CS5_5\packages\DWA\DWA.pimx
8/4/2014 22:47:12 [INFO] Setup - Start Installing package - E:\Adobe CS5_5\packages\LWA\LWA.pimx
8/4/2014 22:47:12 [INFO] PIM - START installPackage at file E:\Adobe CS5_5\packages\LWA\LWA.pimx
8/4/2014 22:47:12 [INFO] PIM - Trying to access xml at path:E:\Adobe CS5_5\packages\LWA\LWA.pimx
8/4/2014 22:47:12 [INFO] PIM - XML is valid
8/4/2014 22:47:12 [WARN] PIM - Failed to find Node
8/4/2014 22:47:12 [INFO] PIM - srcPath :C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\/LWA/ destPath :C:\Users\Kaylene\AppData\Local\Adobe\OOBE\PDApp/LWA/
8/4/2014 22:47:12 [INFO] PIM - Function :copyPrimitive
8/4/2014 22:47:14 [INFO] Setup - Finished Installing package - E:\Adobe CS5_5\packages\LWA\LWA.pimx
8/4/2014 22:47:14 [INFO] PIM - srcPath :C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\/P7/ destPath :C:\Users\Kaylene\AppData\Local\Adobe\OOBE\PDApp/P7/
8/4/2014 22:47:14 [INFO] PIM - Function :copyPrimitive
8/4/2014 22:47:16 [INFO] PIM - srcPath :C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\/D6/ destPath :C:\Users\Kaylene\AppData\Local\Adobe\OOBE\PDApp/D6/
8/4/2014 22:47:16 [INFO] PIM - Function :copyPrimitive
8/4/2014 22:47:16 [INFO] PIM - srcPath :C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\/DECore/ destPath :C:\Users\Kaylene\AppData\Local\Adobe\OOBE\PDApp/DECore/
8/4/2014 22:47:16 [INFO] PIM - Function :copyPrimitive
8/4/2014 22:47:17 [INFO] PIM - srcPath :C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\/P6/ destPath :C:\Users\Kaylene\AppData\Local\Adobe\OOBE\PDApp/P6/
8/4/2014 22:47:17 [INFO] PIM - Function :copyPrimitive
8/4/2014 22:47:19 [INFO] PIM - srcPath :C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\/IPC/ destPath :C:\Users\Kaylene\AppData\Local\Adobe\OOBE\PDApp/IPC/
8/4/2014 22:47:19 [INFO] PIM - Function :copyPrimitive
8/4/2014 22:47:19 [INFO] Utilities - File does not exist
8/4/2014 22:47:20 [INFO] Setup - TimeLog: End Installing. Now launching PDApp
8/4/2014 22:47:21 [FATAL] Setup - Adobe Application Manager executable does not exist at the location: C:\Users\Kaylene\AppData\Local\Adobe\OOBE\PDApp\core\PDApp.exe
8/4/2014 22:47:21 [FATAL] Setup - Unable to launch PDApp. File missing
8/4/2014 22:57:44 [INFO] PIM - PIMSqlite closeDB status 0
8/4/2014 22:57:44 [INFO] PIM - PIMSqlite closeDB status 0
8/4/2014 22:57:44 [INFO] PIM - FREE PIM Instance ...
8/4/2014 22:57:44 [INFO] Setup - cleanUSF: Deleting Path C:\Users\Kaylene\AppData\Local\Adobe\OOBE\PDApp
8/4/2014 22:57:44 [INFO] Setup - Setting current directory to C:\Users\Kaylene\AppData\Local\Adobe\OOBE
8/4/2014 22:57:44 [ERROR] Setup - Error in deleting folder C:\Users\Kaylene\AppData\Local\Adobe. Error Code:145
8/4/2014 22:57:44 [INFO] Setup - End Adobe Setup. Exit code: 1 -
Hi all ~ I have problem on installing SQL 2005: please have a look on the following log:
=== Verbose logging started: 2/23/2015 10:59:24 Build type: SHIP UNICODE 4.05.6002.00 Calling process: C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\setup.exe ===
MSI (c) (FC:98) [10:59:24:019]: Resetting cached policy values
MSI (c) (FC:98) [10:59:24:019]: Machine policy value 'Debug' is 0
MSI (c) (FC:98) [10:59:24:019]: ******* RunEngine:
******* Product: {90A40409-6000-11D3-8CFE-0150048383C9}
******* Action:
******* CommandLine: **********
MSI (c) (FC:98) [10:59:24:020]: Client-side and UI is none or basic: Running entire install on the server.
MSI (c) (FC:98) [10:59:24:020]: Grabbed execution mutex.
MSI (c) (FC:98) [10:59:24:022]: Cloaking enabled.
MSI (c) (FC:98) [10:59:24:022]: Attempting to enable all disabled privileges before calling Install on Server
MSI (c) (FC:98) [10:59:24:022]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (EC:B8) [10:59:24:030]: Running installation inside multi-package transaction {90A40409-6000-11D3-8CFE-0150048383C9}
MSI (s) (EC:B8) [10:59:24:030]: Grabbed execution mutex.
MSI (s) (EC:5C) [10:59:24:032]: Resetting cached policy values
MSI (s) (EC:5C) [10:59:24:032]: Machine policy value 'Debug' is 0
MSI (s) (EC:5C) [10:59:24:032]: ******* RunEngine:
******* Product: {90A40409-6000-11D3-8CFE-0150048383C9}
******* Action:
******* CommandLine: **********
MSI (s) (EC:5C) [10:59:24:032]: Machine policy value 'DisableUserInstalls' is 0
MSI (s) (EC:5C) [10:59:24:038]: SRSetRestorePoint skipped for this transaction.
MSI (s) (EC:5C) [10:59:24:039]: End dialog not enabled
MSI (s) (EC:5C) [10:59:24:039]: Original package ==> C:\WINDOWS\Installer\180ca.msi
MSI (s) (EC:5C) [10:59:24:039]: Package we're running from ==> C:\WINDOWS\Installer\180ca.msi
MSI (s) (EC:5C) [10:59:24:043]: APPCOMPAT: looking for appcompat database entry with ProductCode '{90A40409-6000-11D3-8CFE-0150048383C9}'.
MSI (s) (EC:5C) [10:59:24:043]: APPCOMPAT: no matching ProductCode found in database.
MSI (s) (EC:5C) [10:59:24:050]: MSCOREE already loaded, using loaded copy
MSI (s) (EC:5C) [10:59:24:054]: Opening existing patch 'C:\WINDOWS\Installer\57492f7.msp'.
MSI (s) (EC:5C) [10:59:24:054]: Note: 1: 2203 2: C:\WINDOWS\Installer\57492f7.msp 3: -2147287038
MSI (s) (EC:5C) [10:59:24:054]: Couldn't find local patch 'C:\WINDOWS\Installer\57492f7.msp'. Looking for it at its source.
MSI (s) (EC:5C) [10:59:24:054]: Resolving Patch source.
MSI (s) (EC:5C) [10:59:24:054]: User policy value 'SearchOrder' is 'nmu'
MSI (s) (EC:5C) [10:59:24:054]: User policy value 'DisableMedia' is 0
MSI (s) (EC:5C) [10:59:24:054]: Machine policy value 'AllowLockdownMedia' is 0
MSI (s) (EC:5C) [10:59:24:054]: SOURCEMGMT: Media enabled only if package is safe.
MSI (s) (EC:5C) [10:59:24:054]: SOURCEMGMT: Looking for sourcelist for product {34E1EB8F-BDB2-475C-BD80-A86217C41B4D}
MSI (s) (EC:5C) [10:59:24:054]: SOURCEMGMT: Adding {34E1EB8F-BDB2-475C-BD80-A86217C41B4D}; to potential sourcelist list (pcode;disk;relpath).
MSI (s) (EC:5C) [10:59:24:055]: SOURCEMGMT: Now checking product {34E1EB8F-BDB2-475C-BD80-A86217C41B4D}
MSI (s) (EC:5C) [10:59:24:055]: SOURCEMGMT: Media is enabled for product.
MSI (s) (EC:5C) [10:59:24:055]: SOURCEMGMT: Attempting to use LastUsedSource from source list.
MSI (s) (EC:5C) [10:59:24:055]: SOURCEMGMT: Processing net source list.
MSI (s) (EC:5C) [10:59:24:055]: Note: 1: 1402 2: UNKNOWN\Net 3: 2
MSI (s) (EC:5C) [10:59:24:055]: Note: 1: 1706 2: -2147483647 3: OWC11SP3.MSP
MSI (s) (EC:5C) [10:59:24:055]: SOURCEMGMT: Processing media source list.
MSI (s) (EC:5C) [10:59:25:063]: SOURCEMGMT: Resolved source to: 'OWC11SP3.MSP'
MSI (s) (EC:5C) [10:59:51:327]: Note: 1: 1314 2: OWC11SP3.MSP
MSI (s) (EC:5C) [10:59:51:327]: Unable to create a temp copy of patch 'OWC11SP3.MSP'.
MSI (s) (EC:5C) [10:59:51:327]: Searching provided command line patches for patch code {34E1EB8F-BDB2-475C-BD80-A86217C41B4D}
MSI (s) (EC:5C) [10:59:51:329]: Note: 1: 1708
MSI (s) (EC:5C) [10:59:51:329]: Product: Microsoft Office 2003 Web Components -- Installation failed.
MSI (s) (EC:5C) [10:59:51:330]: Windows Installer installed the product. Product Name: Microsoft Office 2003 Web Components. Product Version: 11.0.6558.0. Product Language: 1033. Installation success or error status: 1635.
MSI (s) (EC:5C) [10:59:51:332]: MainEngineThread is returning 1635
MSI (s) (EC:B8) [10:59:51:332]: No System Restore sequence number for this installation.
This update package could not be opened. Verify that the update package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer update package.
C:\WINDOWS\Installer\180ca.msi
MSI (s) (EC:B8) [10:59:51:333]: User policy value 'DisableRollback' is 0
MSI (s) (EC:B8) [10:59:51:333]: Machine policy value 'DisableRollback' is 0
MSI (s) (EC:B8) [10:59:51:333]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (EC:B8) [10:59:51:334]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (EC:B8) [10:59:51:334]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (EC:B8) [10:59:51:335]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2
MSI (s) (EC:B8) [10:59:51:335]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2
MSI (s) (EC:B8) [10:59:51:335]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (EC:B8) [10:59:51:335]: Restoring environment variables
MSI (c) (FC:98) [10:59:51:337]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (FC:98) [10:59:51:337]: MainEngineThread is returning 1635
=== Verbose logging stopped: 2/23/2015 10:59:51 ===
Please help helpthis problem solved, i replace back the .msi to the windows\installer, now i have another probelm::
=== Verbose logging started: 2/23/2015 14:02:33 Build type: SHIP UNICODE 4.05.6002.00 Calling process: C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\setup.exe ===
MSI (c) (44:50) [14:02:33:615]: Resetting cached policy values
MSI (c) (44:50) [14:02:33:615]: Machine policy value 'Debug' is 0
MSI (c) (44:50) [14:02:33:615]: ******* RunEngine:
******* Product: {E46A76D1-9FB9-4770-BA24-3975EF4D120A}
******* Action:
******* CommandLine: **********
MSI (c) (44:50) [14:02:33:616]: Client-side and UI is none or basic: Running entire install on the server.
MSI (c) (44:50) [14:02:33:616]: Grabbed execution mutex.
MSI (c) (44:50) [14:02:33:618]: Cloaking enabled.
MSI (c) (44:50) [14:02:33:618]: Attempting to enable all disabled privileges before calling Install on Server
MSI (c) (44:50) [14:02:33:619]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (B8:9C) [14:02:33:626]: Running installation inside multi-package transaction {E46A76D1-9FB9-4770-BA24-3975EF4D120A}
MSI (s) (B8:9C) [14:02:33:626]: Grabbed execution mutex.
MSI (s) (B8:64) [14:02:33:626]: Resetting cached policy values
MSI (s) (B8:64) [14:02:33:626]: Machine policy value 'Debug' is 0
MSI (s) (B8:64) [14:02:33:626]: ******* RunEngine:
******* Product: {E46A76D1-9FB9-4770-BA24-3975EF4D120A}
******* Action:
******* CommandLine: **********
MSI (s) (B8:64) [14:02:33:626]: Machine policy value 'DisableUserInstalls' is 0
MSI (s) (B8:64) [14:02:33:632]: SRSetRestorePoint skipped for this transaction.
MSI (s) (B8:64) [14:02:33:632]: End dialog not enabled
MSI (s) (B8:64) [14:02:33:633]: Original package ==> C:\WINDOWS\Installer\23e28752.msi
MSI (s) (B8:64) [14:02:33:633]: Package we're running from ==> C:\WINDOWS\Installer\23e28752.msi
MSI (s) (B8:64) [14:02:33:637]: APPCOMPAT: looking for appcompat database entry with ProductCode '{E46A76D1-9FB9-4770-BA24-3975EF4D120A}'.
MSI (s) (B8:64) [14:02:33:637]: APPCOMPAT: no matching ProductCode found in database.
MSI (s) (B8:64) [14:02:33:644]: MSCOREE already loaded, using loaded copy
MSI (s) (B8:64) [14:02:33:648]: Machine policy value 'DisablePatch' is 0
MSI (s) (B8:64) [14:02:33:648]: Machine policy value 'AllowLockdownPatch' is 0
MSI (s) (B8:64) [14:02:33:648]: Machine policy value 'DisableLUAPatching' is 0
MSI (s) (B8:64) [14:02:33:648]: Machine policy value 'DisableFlyWeightPatching' is 0
MSI (s) (B8:64) [14:02:33:649]: APPCOMPAT: looking for appcompat database entry with ProductCode '{E46A76D1-9FB9-4770-BA24-3975EF4D120A}'.
MSI (s) (B8:64) [14:02:33:649]: APPCOMPAT: no matching ProductCode found in database.
MSI (s) (B8:64) [14:02:33:649]: Transforms are not secure.
MSI (s) (B8:64) [14:02:33:650]: PROPERTY CHANGE: Adding MsiLogFileLocation property. Its value is 'C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0018_SV53749_MSXML6_1.log'.
MSI (s) (B8:64) [14:02:33:650]: Command Line: STPSETUPTHREADID=1484 STPSETUPPROCESSID=9540 EXTERNALCONTROL=1 ADDLOCAL=ALL SKIPPENDINGREBOOTCHECK=1 APPGUID={FFFA78A7-BD51-4255-8470-C4D4A85B49F5} REBOOT=ReallySuppress CURRENTDIRECTORY=C:\Program Files\Microsoft
SQL Server\90\Setup Bootstrap CLIENTUILEVEL=3 MSICLIENTUSESEXTERNALUI=1 CLIENTPROCESSID=9540
MSI (s) (B8:64) [14:02:33:650]: PROPERTY CHANGE: Adding PackageCode property. Its value is '{EE6525FC-1729-4E76-A8C1-12C756BA0AD0}'.
MSI (s) (B8:64) [14:02:33:650]: Product Code passed to Engine.Initialize: '{E46A76D1-9FB9-4770-BA24-3975EF4D120A}'
MSI (s) (B8:64) [14:02:33:650]: Product Code from property table before transforms: '{E46A76D1-9FB9-4770-BA24-3975EF4D120A}'
MSI (s) (B8:64) [14:02:33:650]: Product Code from property table after transforms: '{E46A76D1-9FB9-4770-BA24-3975EF4D120A}'
MSI (s) (B8:64) [14:02:33:650]: Product registered: entering maintenance mode
MSI (s) (B8:64) [14:02:33:650]: Product {E46A76D1-9FB9-4770-BA24-3975EF4D120A} is admin assigned: LocalSystem owns the publish key.
MSI (s) (B8:64) [14:02:33:650]: Product {E46A76D1-9FB9-4770-BA24-3975EF4D120A} is managed.
MSI (s) (B8:64) [14:02:33:650]: MSI_LUA: Credential prompt not required, user is an admin
MSI (s) (B8:64) [14:02:33:650]: PROPERTY CHANGE: Adding ProductState property. Its value is '5'.
MSI (s) (B8:64) [14:02:33:650]: PROPERTY CHANGE: Adding ProductToBeRegistered property. Its value is '1'.
MSI (s) (B8:64) [14:02:33:651]: Package name retrieved from configuration data: 'msxml6.msi'
MSI (s) (B8:64) [14:02:33:651]: Determined that existing product (either this product or the product being upgraded with a patch) is installed per-machine.
MSI (s) (B8:64) [14:02:33:654]: Note: 1: 2262 2: AdminProperties 3: -2147287038
MSI (s) (B8:64) [14:02:33:654]: Machine policy value 'DisableMsi' is 1
MSI (s) (B8:64) [14:02:33:654]: Machine policy value 'AlwaysInstallElevated' is 0
MSI (s) (B8:64) [14:02:33:654]: User policy value 'AlwaysInstallElevated' is 0
MSI (s) (B8:64) [14:02:33:654]: Product {E46A76D1-9FB9-4770-BA24-3975EF4D120A} is admin assigned: LocalSystem owns the publish key.
MSI (s) (B8:64) [14:02:33:654]: Product {E46A76D1-9FB9-4770-BA24-3975EF4D120A} is managed.
MSI (s) (B8:64) [14:02:33:654]: Running product '{E46A76D1-9FB9-4770-BA24-3975EF4D120A}' with elevated privileges: Product is assigned.
MSI (s) (B8:64) [14:02:33:654]: PROPERTY CHANGE: Adding STPSETUPTHREADID property. Its value is '1484'.
MSI (s) (B8:64) [14:02:33:654]: PROPERTY CHANGE: Adding STPSETUPPROCESSID property. Its value is '9540'.
MSI (s) (B8:64) [14:02:33:654]: PROPERTY CHANGE: Adding EXTERNALCONTROL property. Its value is '1'.
MSI (s) (B8:64) [14:02:33:654]: PROPERTY CHANGE: Adding ADDLOCAL property. Its value is 'ALL'.
MSI (s) (B8:64) [14:02:33:654]: PROPERTY CHANGE: Adding SKIPPENDINGREBOOTCHECK property. Its value is '1'.
MSI (s) (B8:64) [14:02:33:654]: PROPERTY CHANGE: Adding APPGUID property. Its value is '{FFFA78A7-BD51-4255-8470-C4D4A85B49F5}'.
MSI (s) (B8:64) [14:02:33:654]: PROPERTY CHANGE: Adding REBOOT property. Its value is 'ReallySuppress'.
MSI (s) (B8:64) [14:02:33:655]: PROPERTY CHANGE: Adding CURRENTDIRECTORY property. Its value is 'C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap'.
MSI (s) (B8:64) [14:02:33:655]: PROPERTY CHANGE: Adding CLIENTUILEVEL property. Its value is '3'.
MSI (s) (B8:64) [14:02:33:655]: PROPERTY CHANGE: Adding MSICLIENTUSESEXTERNALUI property. Its value is '1'.
MSI (s) (B8:64) [14:02:33:655]: PROPERTY CHANGE: Adding CLIENTPROCESSID property. Its value is '9540'.
MSI (s) (B8:64) [14:02:33:655]: Machine policy value 'DisableAutomaticApplicationShutdown' is 0
MSI (s) (B8:64) [14:02:33:655]: PROPERTY CHANGE: Adding MsiRestartManagerSessionKey property. Its value is '2bacf19a1da7c4438b188852d7df058c'.
MSI (s) (B8:64) [14:02:33:655]: RESTART MANAGER: Session opened.
MSI (s) (B8:64) [14:02:33:655]: TRANSFORMS property is now:
MSI (s) (B8:64) [14:02:33:655]: PROPERTY CHANGE: Adding PRODUCTLANGUAGE property. Its value is '1033'.
MSI (s) (B8:64) [14:02:33:655]: PROPERTY CHANGE: Adding VersionDatabase property. Its value is '300'.
MSI (s) (B8:64) [14:02:33:658]: SHELL32::SHGetFolderPath returned: C:\Users\Administrator\AppData\Roaming
MSI (s) (B8:64) [14:02:33:660]: SHELL32::SHGetFolderPath returned: C:\Users\Administrator\Favorites
MSI (s) (B8:64) [14:02:33:662]: SHELL32::SHGetFolderPath returned: C:\Users\Administrator\AppData\Roaming\Microsoft\Windows\Network Shortcuts
MSI (s) (B8:64) [14:02:33:663]: SHELL32::SHGetFolderPath returned: C:\Users\Administrator\Documents
MSI (s) (B8:64) [14:02:33:665]: SHELL32::SHGetFolderPath returned: C:\Users\Administrator\AppData\Roaming\Microsoft\Windows\Printer Shortcuts
MSI (s) (B8:64) [14:02:33:667]: SHELL32::SHGetFolderPath returned: C:\Users\Administrator\AppData\Roaming\Microsoft\Windows\Recent
MSI (s) (B8:64) [14:02:33:668]: SHELL32::SHGetFolderPath returned: C:\Users\Administrator\AppData\Roaming\Microsoft\Windows\SendTo
MSI (s) (B8:64) [14:02:33:671]: SHELL32::SHGetFolderPath returned: C:\Users\Administrator\AppData\Roaming\Microsoft\Windows\Templates
MSI (s) (B8:64) [14:02:33:671]: SHELL32::SHGetFolderPath returned: C:\ProgramData
MSI (s) (B8:64) [14:02:33:673]: SHELL32::SHGetFolderPath returned: C:\Users\Administrator\AppData\Local
MSI (s) (B8:64) [14:02:33:675]: SHELL32::SHGetFolderPath returned: C:\Users\Administrator\Pictures
MSI (s) (B8:64) [14:02:33:679]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative Tools
MSI (s) (B8:64) [14:02:33:681]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup
MSI (s) (B8:64) [14:02:33:682]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs
MSI (s) (B8:64) [14:02:33:685]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu
MSI (s) (B8:64) [14:02:33:687]: SHELL32::SHGetFolderPath returned: C:\Users\Public\Desktop
MSI (s) (B8:64) [14:02:33:691]: SHELL32::SHGetFolderPath returned: C:\Users\Administrator\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Administrative Tools
MSI (s) (B8:64) [14:02:33:693]: SHELL32::SHGetFolderPath returned: C:\Users\Administrator\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup
MSI (s) (B8:64) [14:02:33:695]: SHELL32::SHGetFolderPath returned: C:\Users\Administrator\AppData\Roaming\Microsoft\Windows\Start Menu\Programs
MSI (s) (B8:64) [14:02:33:697]: SHELL32::SHGetFolderPath returned: C:\Users\Administrator\AppData\Roaming\Microsoft\Windows\Start Menu
MSI (s) (B8:64) [14:02:33:698]: SHELL32::SHGetFolderPath returned: C:\Users\Administrator\Desktop
MSI (s) (B8:64) [14:02:33:701]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Templates
MSI (s) (B8:64) [14:02:33:701]: SHELL32::SHGetFolderPath returned: C:\Windows\Fonts
MSI (s) (B8:64) [14:02:33:702]: Note: 1: 2898 2: MS Sans Serif 3: MS Sans Serif 4: 0 5: 16
MSI (s) (B8:64) [14:02:33:711]: MSI_LUA: Setting MsiRunningElevated property to 1 because the install is already running elevated.
MSI (s) (B8:64) [14:02:33:711]: PROPERTY CHANGE: Adding MsiRunningElevated property. Its value is '1'.
MSI (s) (B8:64) [14:02:33:711]: PROPERTY CHANGE: Adding Privileged property. Its value is '1'.
MSI (s) (B8:64) [14:02:33:711]: PROPERTY CHANGE: Adding USERNAME property. Its value is 'Sun Life'.
MSI (s) (B8:64) [14:02:33:711]: PROPERTY CHANGE: Adding COMPANYNAME property. Its value is 'Sun Life Hong Kong Limited'.
MSI (s) (B8:64) [14:02:33:711]: PROPERTY CHANGE: Adding Installed property. Its value is '00:00:00'.
MSI (s) (B8:64) [14:02:33:711]: PROPERTY CHANGE: Adding DATABASE property. Its value is 'C:\WINDOWS\Installer\23e28752.msi'.
MSI (s) (B8:64) [14:02:33:711]: PROPERTY CHANGE: Adding OriginalDatabase property. Its value is 'C:\WINDOWS\Installer\23e28752.msi'.
MSI (s) (B8:64) [14:02:33:711]: Machine policy value 'MsiDisableEmbeddedUI' is 0
MSI (s) (B8:64) [14:02:33:711]: EEUI - Disabling MsiEmbeddedUI due to existing external or embedded UI
MSI (s) (B8:64) [14:02:33:711]: EEUI - Disabling MsiEmbeddedUI for service because it's not a quiet/basic install
MSI (s) (B8:64) [14:02:33:712]: Note: 1: 2205 2: 3: PatchPackage
MSI (s) (B8:64) [14:02:33:712]: Machine policy value 'DisableRollback' is 0
MSI (s) (B8:64) [14:02:33:712]: User policy value 'DisableRollback' is 0
MSI (s) (B8:64) [14:02:33:712]: PROPERTY CHANGE: Adding UILevel property. Its value is '2'.
=== Logging started: 2/23/2015 14:02:33 ===
MSI (s) (B8:64) [14:02:33:713]: PROPERTY CHANGE: Adding Preselected property. Its value is '1'.
MSI (s) (B8:64) [14:02:33:713]: PROPERTY CHANGE: Adding ACTION property. Its value is 'INSTALL'.
MSI (s) (B8:64) [14:02:33:713]: Doing action: INSTALL
Action start 14:02:33: INSTALL.
MSI (s) (B8:64) [14:02:33:717]: Running ExecuteSequence
MSI (s) (B8:64) [14:02:33:717]: Doing action: SkipInstallCA
MSI (s) (B8:64) [14:02:33:720]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'SkipInstallCA'
MSI (s) (B8:B8) [14:02:33:730]: Invoking remote custom action. DLL: C:\Windows\Installer\MSI92BC.tmp, Entrypoint: SkipInstall
MSI (s) (B8:B0) [14:02:33:730]: Generating random cookie.
MSI (s) (B8:B0) [14:02:33:743]: Created Custom Action Server with PID 8820 (0x2274).
MSI (s) (B8:20) [14:02:33:788]: Running as a service.
MSI (s) (B8:20) [14:02:33:791]: Hello, I'm your 32bit Impersonated custom action server.
Action start 14:02:33: SkipInstallCA.
This package is not supported on this operating system.
Action ended 14:02:33: SkipInstallCA. Return value 3.
Action ended 14:02:33: INSTALL. Return value 3.
Property(S): ProductCode = {E46A76D1-9FB9-4770-BA24-3975EF4D120A}
Property(S): Manufacturer = Microsoft Corporation
Property(S): ProductVersion = 6.20.2016.0
Property(S): ProductLanguage = 1033
Property(S): UpgradeCode = {1B117BA7-5BC1-419E-820E-7D4F3F412C7B}
Property(S): ARPPRODUCTICON = ARPIco
Property(S): PIDTemplate = 53934<````=````=````=````=`````>@@@@@
Property(S): PROMPTROLLBACKCOST = P
Property(S): DiskPrompt = [1]
Property(S): INSTALLLEVEL = 100
Property(S): ALLUSERS = 1
Property(S): InstallMode = Typical
Property(S): ErrorIcon = ErrorIco
Property(S): SuccessIcon = SuccessIco
Property(S): WarningIcon = WarningIco
Property(S): LicenseIcon = LicenseIco
Property(S): SetupIcon = SetupIco
Property(S): CompleteIcon = CompleteIco
Property(S): CustomIcon = CustomIco
Property(S): RepairIcon = RepairIco
Property(S): RemoveIcon = RemoveIco
Property(S): ModifyIcon = ModifyIco
Property(S): NewIcon = NewIco
Property(S): UpIcon = UpIco
Property(S): DialogBanner = BannerBmp
Property(S): WelcomeBmp = WelcomeBmp
Property(S): ApplicationUsers = AllUsers
Property(S): Details = 0
Property(S): AgreeToLicense = No
Property(S): _IsMaintenance = Reinstall
Property(S): _IsMaintenance2 = Modify
Property(S): ReinstallModeText = omus
Property(S): Display_IsBitmapDlg = 1
Property(S): Interrupted = 0
Property(S): ProductID = none
Property(S): ISENABLEDWUSFINISHDIALOG = 1
Property(S): SQLServerText1 = 0
Property(S): SQLServerVersionText1 = 0
Property(S): SQLServerVersionText2 = 0
Property(S): SQLServerVersionText3 = 0
Property(S): CA_ERRORCOUNT = 0
Property(S): CA_WARNINGCOUNT = 0
Property(S): CA_SUCCESSCOUNT = 0
Property(S): MINIMUMOS = true
Property(S): UI_SHOWCOPYRIGHT = yes
Property(S): ShowUserRegistrationDlg = 1
Property(S): ErrorDialog = ErrorDlg
Property(S): DefaultUIFont = Tahoma8
Property(S): VersionNT = 600
Property(S): ARPHELPLINK = http://support.microsoft.com/kb/2758696
Property(S): SecureCustomProperties = NEWERFOUND.72DE5BCD_5CB0_4335_B118_AB4C4DA70AE1;OLDERFOUND.72DE5BCD_5CB0_4335_B118_AB4C4DA70AE1;OLDERFOUND2.72DE5BCD_5CB0_4335_B118_AB4C4DA70AE1
Property(S): DesktopFolder = C:\Users\Public\Desktop\
Property(S): ProgramFilesFolder = C:\Program Files\
Property(S): ButtonTextStyle = {\ButtonTextStyle}
Property(S): DlgTextStyle = {\DlgTextStyle}
Property(S): DlgTextStyleB = {\DlgTextStyleB}
Property(S): DlgTitleStyle = {\DlgTitleStyle}
Property(S): DlgTitleStyleB = {\DlgTitleStyleB}
Property(S): FixedStyle = {\FixedStyle}
Property(S): Installed = 00:00:00
Property(S): COMPANYNAME = Sun Life Hong Kong Limited
Property(S): USERNAME = Sun Life
Property(S): DialogTitleSetup = Setup
Property(S): DialogTitlePatch = Patch
Property(S): DialogTitleUpgrade = Upgrade
Property(S): Text_ArrowLeft = <
Property(S): Text_ArrowRight = >
Property(S): ButtonText_Next = Next
Property(S): ButtonText_Next_Hot = &Next
Property(S): ButtonText_Cancel = Cancel
Property(S): ButtonText_Cancel_Hot = &Cancel
Property(S): ButtonText_Back = Back
Property(S): ButtonText_Back_Hot = &Back
Property(S): ButtonText_Finish = Finish
Property(S): ButtonText_Finish_Hot = &Finish
Property(S): ButtonText_Update = Update >
Property(S): ButtonText_Update_Hot = &Update >
Property(S): ButtonText_Ok = OK
Property(S): ButtonText_Ok_Hot = &OK
Property(S): ButtonText_Yes = Yes
Property(S): ButtonText_Yes_Hot = &Yes
Property(S): ButtonText_No = No
Property(S): ButtonText_No_Hot = &No
Property(S): ButtonText_Abort = Abort
Property(S): ButtonText_Abort_Hot = &Abort
Property(S): ButtonText_Ignore = Ignore
Property(S): ButtonText_Ignore_Hot = &Ignore
Property(S): ButtonText_Retry = Retry
Property(S): ButtonText_Retry_Hot = &Retry
Property(S): ButtonText_Change = Change...
Property(S): ButtonText_Change_Hot = &Change...
Property(S): ButtonText_Help = Help
Property(S): ButtonText_Help_Hot = &Help
Property(S): ButtonText_Install = Install
Property(S): ButtonText_Install_Hot = &Install
Property(S): ButtonText_Exit = Exit
Property(S): ButtonText_Exit_Hot = &Exit
Property(S): ButtonText_Remove = Remove
Property(S): ButtonText_Remove_Hot = &Remove
Property(S): ButtonText_Space = Space
Property(S): ButtonText_Space_Hot = &Space
Property(S): ButtonText_Browse = Browse...
Property(S): ButtonText_Browse_Hot = Bro&wse...
Property(S): ButtonText_DiskCost = Disk Cost...
Property(S): ButtonText_DiskCost_Hot = &Disk Cost...
Property(S): LabelText_Status = Status
Property(S): LabelText_SerialNumber = &Serial Number:
Property(S): LabelText_UserName = &User Name
Property(S): LabelText_PersonName = Name
Property(S): LabelText_PersonOrganization = Company
Property(S): LabelText_InstallTo = Install to
Property(S): LabelText_Modify = &Modify
Property(S): LabelText_Repair = Re&pair
Property(S): LabelText_Remove = &Remove
Property(S): LabelText_Complete = &Complete
Property(S): LabelText_Custom = Cu&stom
Property(S): LabelText_NetworkLocation = &Network location:
Property(S): LabelText_LookIn = &Look in
Property(S): LabelText_FolderName = &Folder name
Property(S): LabelText_FeatureDescription = Feature description
Property(S): LabelText_CopyFilesFrom = Copy Files from
Property(S): LabelText_InstallFor = Install this application for
Property(S): HeadText_AdminWelcome = Welcome to the Install Wizard for
Property(S): HeadText_InstallWelcome = Welcome to the Install Wizard for
Property(S): HeadText_WelcomePatch = Welcome to the Patch for
Property(S): HeadText_SetupWelcome = Welcome to the
Property(S): HeadText_SetupWelcome2 = Setup
Property(S): HeadText_ResumeInstall = Resuming the Install Wizard for
Property(S): HeadText_SetupInterrupted = Setup Interrupted
Property(S): HeadText_LicenseAgreement = License Agreement
Property(S): HeadText_FeatureSelection = Feature Selection
Property(S): HeadText_NetworkLocation = Network Location
Property(S): HeadText_ProgramMaintenance = Program Maintenance
Property(S): HeadText_DiskSpaceRequirements = Disk Space Requirements
Property(S): HeadText_FilesInUse = Files in Use
Property(S): HeadText_DatabaseFolder = Database Folder
Property(S): HeadText_RegistrationInformation = Registration Information
Property(S): HeadText_CompletingSetup = Completing the
Property(S): HeadText_CompletingSetup2 = Setup
Property(S): HeadText_InstallingProduct = Installing
Property(S): HeadText_UninstallProduct = Uninstalling
Property(S): HeadText_ChangeDestinationFolder = Change Current Destination Folder
Property(S): HeadText_ReadyInstall = Ready to Install the Program
Property(S): HeadText_ReadyRepair = Ready to Repair the Program
Property(S): HeadText_ReadyModify = Ready to Modify the Program
Property(S): HeadText_RemoveProgram = Remove the Program
Property(S): HeadText_OutOfDiskSpace = Out of Disk Space
Property(S): DescText_FilesInUse = Some files that need to be updated are currently in use.
Property(S): DescText_RegistrationInformation = The following information will personalize your installation.
Property(S): DescText_ServerImage = Setup will create a server image of
Property(S): DescText_ServerImage2 = at a specified network location. To continue, click Next.
Property(S): DescText_InstallModifyRemove = Setup helps you install, modify or remove
Property(S): DescText_InstallModifyRemove2 = . To continue, click Next.
Property(S): DescText_PatchInstall = The Install Wizard will install the Patch for
Property(S): DescText_PatchInstall2 = on your computer. To continue, click Update.
Property(S): DescText_WizardComplete = The Install Wizard will complete the installation of
Property(S): DescText_WizardComplete2 = on your computer. To continue, click Next.
Property(S): DescText_CompleteSuspended = The Install Wizard will complete the suspended installation of
Property(S): DescText_CompleteSuspended2 = on your computer. To continue, click Next.
Property(S): DescText_SuccessfulInstallation = Setup has installed
Property(S): DescText_SuccessfulInstallation2 = successfully. Click Finish to exit.
Property(S): DescText_SuccessfulRemove = Setup has removed
Property(S): DescText_SuccessfulRemove2 = successfully. Click Finish to exit.
Property(S): DescText_SuccessfulRepair = Setup has repaired
Property(S): DescText_SuccessfulRepair2 = successfully. Click Finish to exit.
Property(S): DescText_SuccessfulModify = Setup has modified
Property(S): DescText_SuccessfulModify2 = successfully. Click Finish to exit.
Property(S): DescText_SetupInterrupted = Setup was interrupted before
Property(S): DescText_SetupInterrupted2 = could be completely installed.
Property(S): DescText_PreparingSetup = Setup is preparing the Install Wizard which will guide you through the program setup process. Please wait.
Property(S): DescText_FeatureSelection = Select the program features you want installed.
Property(S): DescText_ProgramFeaturesInstall = The program features you selected are being installed.
Property(S): DescText_ProgramFeaturesUninstall = The program features you selected are being uninstalled.
Property(S): DescText_ReadLicense = Please read the following license agreement carefully.
Property(S): DescText_SpecifyNetworkLocation = Specify a network location for the server image of the product.
Property(S): DescText_BrowseDestination = Browse to the destination folder.
Property(S): DescText_ModifyRepairRemove = Repair or remove the program.
Property(S): DescText_ReadyInstallation = Setup is ready to begin installation.
Property(S): DescText_ChosenRemove = You have chosen to remove the program from your system.
Property(S): DescText_DiskSpaceRequirements = The disk space required for the installation of the selected features.
Property(S): DescText_DiskExceedsAvailable = Disk space required for the installation exceeds available disk space.
Property(S): Text_ReRunSetup = Your system has not been modified. To complete installation at another time, please run setup again.
Property(S): Text_FinishExit = Click Finish to exit Setup.
Property(S): Text_RestoreState = You can either keep any existing installed elements on your system to continue this installation at a later time or you can restore your system to its original state prior to the installation.
Property(S): Text_RestoreClick = Click Restore or Continue Later to exit Setup.
Property(S): Text_InstallWait = Please wait while the Install Wizard installs
Property(S): Text_InstallWait2 = . This may take several minutes.
Property(S): Text_UninstallWaitText = Please wait while the Install Wizard uninstalls
Property(S): Text_UninstallWaitText2 = . This may take several minutes.
Property(S): Text_UninstallWait = Please wait while the Install Wizard uninstalls
Property(S): Text_UninstallWait2 = . This may take several minutes.
Property(S): Text_ProgressDone = Progress done
Property(S): Text_Copyright = WARNING: This program is protected by copyright law and international treaties.
Property(S): Text_BeginInstallation = Click Install to begin the installation.
Property(S): Text_ReviewChange = If you want to review or change any of your installation settings, click Back. Click Cancel to exit Setup.
Property(S): Text_AlterFeatureInstall = Click an icon in the following list to change how a feature is installed.
Property(S): Text_ConfirmExit = The installation is not yet complete. Are you sure you want to exit?
Property(S): Text_FeatureSelectionDescription = This feature requires 4 MB on your hard drive.
Property(S): Text_EnterNetworkLocation = Enter the network location or click Change to browse to a location. Click Install to create a server image of
Property(S): Text_EnterNetworkLocation2 = at the specified network location or click Cancel to exit Setup.
Property(S): Text_SelectDifferentDrive = The highlighted volumes do not have enough disk space available for the currently selected features. You can remove files from the highlighted volumes, choose to install less features onto local drives, or select different
destination drives.
Property(S): Text_RepairInstallationErrors = Repair installation errors in the program. This option fixes missing or corrupt files, shortcuts, and registry entries.
Property(S): Text_RemoveFromComputer = Remove
Property(S): Text_RemoveFromComputer2 = from your computer.
Property(S): Text_UsingFilesRetry = The following applications are using files that need to be updated by this setup. Close these applications and click Retry to continue.
Property(S): Text_ClickRemove = Click Remove to remove
Property(S): Text_ClickRemove2 = from your computer. After removal, this program will no longer be available for use.
Property(S): Text_ReviewChangeBack = If you want to review or change any settings, click Back.
Property(S): Text_AllUsers = &Anyone who uses this computer (all users)
Property(S): Text_OnlyMe = Only for &me ([USERNAME])
Property(S): Text_NotAcceptTerms = I &do not accept the terms in the license agreement
Property(S): Text_AcceptTerms = I &accept the terms in the license agreement
Property(S): Text_RegInfoNameAndOrg = Enter your name and the name of your organization in the fields below.
Property(S): Text_RegInfoOrg = Enter the name of your organization in the field below.
Property(S): Upgrade_Confirmation = A lower version of this product has been detected on your system. Would you like to upgrade your existing installation?
Property(S): AdminMessage = Setup requires user to be in the administrator group in order to continue the installation process. Setup is aborting as the current user is not in the administrator group.
Property(S): SupportedOSMessage = Installation of this product failed because it is not supported on this operating system. For information on supported configurations, see the product documentation.
Property(S): ShortCutText = MSXML 6 Service Pack 2 (KB2758696)
Property(S): DialogTitle = MSXML 6 Service Pack 2 (KB2758696) Setup
Property(S): ProductName = MSXML 6 Service Pack 2 (KB2758696)
Property(S): ShortName = MSXML 6 Service Pack 2 (KB2758696)
Property(S): WrongPackage = This MSXML6 Service Pack 2 (KB2758696) package is not supported on the current processor type.
Property(S): DialogPatchTitle = MSXML 6 Service Pack 2 (KB2758696) Patch
Property(S): SystemFolder = C:\Windows\system32\
Property(S): WdSfpCaMainModId.41646F16_4E6C_4E96_BF1B_772105414B9D = 86F857F6_A743_463D_B2FE_98CB5F727E09
Property(S): AppGuidRegKey = Wdsfpca_Uninstall_RegKey.86F857F6_A743_463D_B2FE_98CB5F727E09
Property(S): MsiLogFileLocation = C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0018_SV53749_MSXML6_1.log
Property(S): PackageCode = {EE6525FC-1729-4E76-A8C1-12C756BA0AD0}
Property(S): ProductState = 5
Property(S): ProductToBeRegistered = 1
Property(S): STPSETUPTHREADID = 1484
Property(S): STPSETUPPROCESSID = 9540
Property(S): EXTERNALCONTROL = 1
Property(S): ADDLOCAL = ALL
Property(S): SKIPPENDINGREBOOTCHECK = 1
Property(S): APPGUID = {FFFA78A7-BD51-4255-8470-C4D4A85B49F5}
Property(S): REBOOT = ReallySuppress
Property(S): CURRENTDIRECTORY = C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap
Property(S): CLIENTUILEVEL = 3
Property(S): MSICLIENTUSESEXTERNALUI = 1
Property(S): CLIENTPROCESSID = 9540
Property(S): MsiRestartManagerSessionKey = 2bacf19a1da7c4438b188852d7df058c
Property(S): PRODUCTLANGUAGE = 1033
Property(S): VersionDatabase = 300
Property(S): VersionMsi = 4.05
Property(S): WindowsBuild = 6002
Property(S): ServicePackLevel = 2
Property(S): ServicePackLevelMinor = 0
Property(S): MsiNTProductType = 3
Property(S): WindowsFolder = C:\Windows\
Property(S): WindowsVolume = C:\
Property(S): System16Folder = C:\Windows\system\
Property(S): RemoteAdminTS = 1
Property(S): TempFolder = C:\Users\ADMINI~1\AppData\Local\Temp\
Property(S): CommonFilesFolder = C:\Program Files\Common Files\
Property(S): AppDataFolder = C:\Users\Administrator\AppData\Roaming\
Property(S): FavoritesFolder = C:\Users\Administrator\Favorites\
Property(S): NetHoodFolder = C:\Users\Administrator\AppData\Roaming\Microsoft\Windows\Network Shortcuts\
Property(S): PersonalFolder = C:\Users\Administrator\Documents\
Property(S): PrintHoodFolder = C:\Users\Administrator\AppData\Roaming\Microsoft\Windows\Printer Shortcuts\
Property(S): RecentFolder = C:\Users\Administrator\AppData\Roaming\Microsoft\Windows\Recent\
Property(S): SendToFolder = C:\Users\Administrator\AppData\Roaming\Microsoft\Windows\SendTo\
Property(S): TemplateFolder = C:\ProgramData\Microsoft\Windows\Templates\
Property(S): CommonAppDataFolder = C:\ProgramData\
Property(S): LocalAppDataFolder = C:\Users\Administrator\AppData\Local\
Property(S): MyPicturesFolder = C:\Users\Administrator\Pictures\
Property(S): AdminToolsFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative Tools\
Property(S): StartupFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup\
Property(S): ProgramMenuFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\
Property(S): StartMenuFolder = C:\ProgramData\Microsoft\Windows\Start Menu\
Property(S): FontsFolder = C:\Windows\Fonts\
Property(S): GPTSupport = 1
Property(S): OLEAdvtSupport = 1
Property(S): ShellAdvtSupport = 1
Property(S): Intel = 6
Property(S): PhysicalMemory = 2047
Property(S): VirtualMemory = 2390
Property(S): AdminUser = 1
Property(S): LogonUser = Administrator
Property(S): UserSID = S-1-5-21-752955860-2970973076-2057269693-500
Property(S): UserLanguageID = 1033
Property(S): ComputerName = SV53749
Property(S): SystemLanguageID = 1033
Property(S): ScreenX = 1024
Property(S): ScreenY = 768
Property(S): CaptionHeight = 19
Property(S): BorderTop = 1
Property(S): BorderSide = 1
Property(S): TextHeight = 16
Property(S): TextInternalLeading = 3
Property(S): ColorBits = 32
Property(S): TTCSupport = 1
Property(S): Time = 14:02:33
Property(S): Date = 2/23/2015
Property(S): MsiNetAssemblySupport = 2.0.50727.4016
Property(S): MsiWin32AssemblySupport = 6.0.6001.18000
Property(S): RedirectedDllSupport = 2
Property(S): MsiRunningElevated = 1
Property(S): Privileged = 1
Property(S): DATABASE = C:\WINDOWS\Installer\23e28752.msi
Property(S): OriginalDatabase = C:\WINDOWS\Installer\23e28752.msi
Property(S): UILevel = 2
Property(S): Preselected = 1
Property(S): ACTION = INSTALL
MSI (s) (B8:64) [14:02:33:948]: Note: 1: 1729
MSI (s) (B8:64) [14:02:33:948]: Product: MSXML 6 Service Pack 2 (KB2758696) -- Configuration failed.
MSI (s) (B8:64) [14:02:33:949]: Windows Installer reconfigured the product. Product Name: MSXML 6 Service Pack 2 (KB2758696). Product Version: 6.20.2016.0. Product Language: 1033. Reconfiguration success or error status: 1603.
MSI (s) (B8:64) [14:02:33:951]: Deferring clean up of packages/files, if any exist
MSI (s) (B8:64) [14:02:33:951]: MainEngineThread is returning 1603
MSI (s) (B8:9C) [14:02:33:952]: RESTART MANAGER: Session closed.
MSI (s) (B8:9C) [14:02:33:952]: No System Restore sequence number for this installation.
=== Logging stopped: 2/23/2015 14:02:33 ===
MSI (s) (B8:9C) [14:02:33:952]: User policy value 'DisableRollback' is 0
MSI (s) (B8:9C) [14:02:33:952]: Machine policy value 'DisableRollback' is 0
MSI (s) (B8:9C) [14:02:33:952]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (B8:9C) [14:02:33:953]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (B8:9C) [14:02:33:953]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (B8:9C) [14:02:33:954]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2
MSI (s) (B8:9C) [14:02:33:954]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2
MSI (s) (B8:9C) [14:02:33:954]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (B8:9C) [14:02:33:954]: Restoring environment variables
MSI (s) (B8:9C) [14:02:33:955]: Destroying RemoteAPI object.
MSI (s) (B8:B0) [14:02:33:955]: Custom Action Manager thread ending.
MSI (c) (44:50) [14:02:33:957]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (44:50) [14:02:33:959]: MainEngineThread is returning 1603
=== Verbose logging stopped: 2/23/2015 14:02:33 ===
MSXML6 problem -
Portege R700 - Installed Power Saver on Windows 7 64bit
Hi,
I was looking for a way to reduse fan noise on a Win7 Portege R700-174 and read to install "Power Saver" from the Toshiba support site.
Installation was OK, but I cannot use ist because Common Module is not installed. I get an error "Code: 0x2". I already understand that "Power Saver" and "Common Module" is not intended for windows 7. Why have I been able to install it anyway?
Now when I try to remove "Power Saver" i get yet another error and uninstall fails.
What can I do? Any help is appreciated!
Regards
MichaelHey,
Toshiba Common Modules and Power Saver are designed for Windows XP only! This software isnt compatible to Vista and Windows 7. In this case you have to install Value Added Package.
Anyway, not its too late and you must remove the installed software. If you get an error while uninstalling I would recommend using CCleaner to remove the programs. CCleaner can also uninstall all software that you have installed and its freeware tool. Do a Google search to download it and try uninstalling the Toshiba tools again.
Check this!!! -
Re: Where can I find recovery image for my Satellite L300D?
Hi all,
my wife has a L300D laptop which was wiped when she used the wrong back up disc in it,,,, need some help and advice as to whether I can find a recovery system on line or do I need to take it into a shop to get it working again
Thanks in advance
NeilUnfortunately Tom is right. What you need now is original Toshiba recovery DVD and you can use it for recovery image installation. After this installation you will have factory settings again.
This disc can be ordered. Just follow the link posted by Tom.
If you have more questions you are welcome. -
Portege R700 - after Java update UMTS/3G is not found
Portege R700 Win 7 Prof.Pro x64.
After updating from java 6u20 to 6u23 the wireless manager isn't able to find the UMTS/3G device. Afterswitching back to pref system recovery point, the UMTS/3G device was detected by the wireless manager correctly and everthing works fine, but the recovered java 6u20 doesn't work in the system and even in the browser (ff 3.6.13 32bit).
What can I do to get back correct function?Hey,
>but the recovered java 6u20 doesn't work in the system
What does this mean exactly? Do you get an error message?
Maybe you have to update the 3G driver with new Java version. Have you already tried that? -
Acrobat XI Pro installation failed
MacBook Pro 13" Retina
OSX 10.8.5
3 GHz Intel Core i7
8 GB 1600 MHz DDR3
Used Akamai NetSession Interface.
Downloaded from Adobe website. After download, clicked on installer, entered serial number, quickly went through installing until right at the end: "THE INSTALLATION FAILED: Installer encountered an error that caused installation to fail. Contact manufacturer." Part of the message cut-off abruptly.
Then, it appeared that the installation did occur but when I opened the software the interface didn't look "smooth." Then almost immediately software update stated Acrobat XI Pro 11.0.04 was available for download, but computer wouldn't allow it to be installed citing error on initial problem. I uninstalled XI Pro and tried to download again from Adobe website but the window instantly opened for Akamai and said download complete. The same problem occured when I tried to install again, with the same error message.Thank you Anish.
The software now appears to be working for some reason, and even though Error 1301 appeared when trying to update to Acrobat 11.0.04, it shows that I am running 11.0.04. There is something going on in there but so far so good.
Date: Wed, 27 Nov 2013 22:38:11 -0800
From: [email protected]
To: <removed by admin>
Subject: Re: Acrobat XI Pro installation failed Acrobat XI Pro installation failed
Re: Acrobat XI Pro installation failed
created by Anish Kumar in Acrobat Installation & Update Issues - View the full discussion
Following links may be helpful for you:
http://helpx.adobe.com/x-productkb/policy-pricing/akamai-download-mana ger-faq.html
http://helpx.adobe.com/creative-suite/kb/cant-download-store-purchase. html
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5882076#5882076
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Re: Acrobat XI Pro installation failed
To unsubscribe from this thread, please visit the message page at Re: Acrobat XI Pro installation failed. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Acrobat Installation & Update Issues at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0. -
System Image Utility always fails, why?
Hi everyone,
on my clean and fresh install of 10.7.4 Server the System Image Utility always fails to create an image. I want to create a NetInstall image and have put the OS X Lion Installer in /Applications. I can select it in SIU and choose to create a NetInstall image. It asks for the admin pw and always presents an error at the very end: Image creation failed. An unknown error has occured.
If I select to create a NetBoot image instead it fails directly after clicking on the Create button with this slightly different message: Image creation failed. An error has occured. At least it’s no unknown error…
Any ideas what might be causing this? I have succesfully created NetInstall images with 10.6 Server and 10.8 Server, but 10.7 Server somehow won’t play nice.
Thanks
BjörnHi Brian,
I first deleted the Installer and redownloaded it from the App Store, just to make sure there was no problem with it. Even though I now have the 10.7.4 Installer (had 10.7.0 before) nothing has changed. I then went on to set the log level as suggested. I now get different errors based on the chosen log level.
Log level set to debug:
Image creation failed.
*** -[__NSArrayM insertObject:atIndex:]: object cannot be nil
Log level set to verbose:
Image creation failed.
An unknown error has occurred.
I did not see anything helpful in the logs unfortunately. The only noticeable thing mentioned was: Failed to create image from installer media.
Any additional ideas? I will attach both logs here, just in case.
VERBOSE LOG:
Starting image creation.
Workflow Started (2012-09-08 14:08:00 +0200)
Mac OS X Server 10.7.4 (11E53), System Image Utility 10.7.3 (543)
Starting action: Define Image Source (1.3)
Finished running action: Define Image Source
Starting action: Create Image (1.6.2)
Starting image creation process...
Create NetInstall Image
Initiating NetInstall from Installer media.
Creating working path at /Users/vm/Desktop/NetInstall of Install Mac OS X Lion
Creating disk image (Size: 4062 MB)
Finalizing disk image.
created: /Users/vm/Desktop/NetInstall of Install Mac OS X Lion/NetInstall.dmg
Attaching disk image
Copying /Volumes/Mac OS X Install ESD
Preparing the kernel and boot loader for the boot image
/Users/vm/Desktop/NetInstall of Install Mac OS X Lion/i386
/Users/vm/Desktop/NetInstall of Install Mac OS X Lion/i386/x86_64
Copying /Volumes/Mac OS X Install ESD/boot.efi
Copying /Volumes/Mac OS X Install ESD/System/Library/CoreServices/PlatformSupport.plist
Performing post install cleanup
Detaching disk image
"disk4" unmounted.
"disk4" ejected.
Correcting permissions. 501:20 /Users/vm/Desktop/NetInstall of Install Mac OS X Lion
Script is done.
Failed to create image from installer media.
An unknown error has occurred.
NetInstall creation failed.
Image creation process finished...
Stopping image creation.
Image creation failed.
DEBUG LOG:
Starting image creation.
Workflow Started (2012-09-08 13:59:22 +0200)
Mac OS X Server 10.7.4 (11E53), System Image Utility 10.7.3 (543)
Starting action: Define Image Source (1.3)
Finished running action: Define Image Source
Starting action: Create Image (1.6.2)
Starting image creation process...
Create NetInstall Image
Initiating NetInstall from Installer media.
progressPrefix="_progress"
++ progressPrefix=_progress
scriptsDebugKey="DEBUG"
++ scriptsDebugKey=DEBUG
imageIsUDIFKey="1"
++ imageIsUDIFKey=1
mountPoint=""
++ mountPoint=
ownershipInfoKey="501:20"
++ ownershipInfoKey=501:20
destVolFSType="HFS+"
++ destVolFSType=HFS+
installSource="/Volumes/Mac OS X Install ESD"
++ installSource='/Volumes/Mac OS X Install ESD'
dmgTarget="NetInstall"
++ dmgTarget=NetInstall
destPath="/Users/vm/Desktop/NetInstall of Install Mac OS X Lion"
++ destPath='/Users/vm/Desktop/NetInstall of Install Mac OS X Lion'
dmgVolName="NetInstall"
++ dmgVolName=NetInstall
. "${1}/createCommon.sh"
+ . /tmp/niutemp.Yv8Z6Mqx/createCommon.sh
# createCommon.sh
# Common functionality for the Image creation process.
# sourced in by the various SIU scripts
# Copyright © 2007-2011 Apple Inc. All rights reserved.
# Using dscl, create a user account
AddLocalUser()
# $1 volume whose local node database to modify
# $2 long name
# $3 short name
# $4 isAdminUser key
# $5 password data
# $6 password hint
# $7 user picture path
# $8 Language string
local databasePath="/Local/Default/Users/${3}"
local targetVol="${1}"
# Find a free UID between 501 and 599
for ((i=501; i<600; i++)); do
output=`/usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -search /Local/Default/Users UniqueID $i`
# If there is already an account dscl returns it, so we're looking for an empty return value.
if [ "$output" == "" ]; then
break
fi
done
# Create the user record
/usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -create $databasePath
if [ $? != 0 ]; then
echo "Failed to create '${databasePath}'."
return 1
fi
# Add long name
/usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath RealName "${2}"
if [ $? != 0 ]; then
echo "Failed to set the RealName."
return 1
fi
# Add PrimaryGroupID
if [ "${4}" == 1 ]; then
/usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath PrimaryGroupID 80
else
/usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath PrimaryGroupID 20
fi
if [ $? != 0 ]; then
echo "Failed to set the PrimaryGroupID."
return 1
fi
# Add UniqueID
/usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath UniqueID ${i}
if [ $? != 0 ]; then
echo "Failed to set the UniqueID."
return 1
fi
# Add Home Directory entry
/usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath NFSHomeDirectory /Users/${3}
if [ $? != 0 ]; then
echo "Failed to set the NFSHomeDirectory."
fi
if [ "${6}" != "" ]; then
/usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath AuthenticationHint "${6}"
if [ $? != 0 ]; then
echo "Failed to set the AuthenticationHint."
return 1
fi
fi
/usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath picture "${7}"
if [ $? != 0 ]; then
echo "Failed to set the picture."
return 1
fi
/usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -passwd $databasePath "${5}"
if [ $? != 0 ]; then
echo "Failed to set the passwd."
return 1
fi
# Add shell
/usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath UserShell "/bin/bash"
if [ $? != 0 ]; then
echo "Failed to set the UserShell."
return 1
fi
# Create Home directory
if [ -e "/System/Library/User Template/${8}.lproj/" ]; then
/usr/bin/ditto "/System/Library/User Template/${8}.lproj/" "${targetVol}/Users/${3}"
else
/usr/bin/ditto "/System/Library/User Template/English.lproj/" "${targetVol}/Users/${3}"
fi
if [ $? != 0 ]; then
echo "Failed to copy the User Template."
return 1
fi
/usr/sbin/chown -R $i:$i "${targetVol}/Users/${3}"
if [ $? != 0 ]; then
echo "Failed to set ownership on the User folder."
return 1
fi
# Copies a list of files (full paths contained in the file at $1) from source to the path specified in $2
CopyEntriesFromFileToPath()
local theFile="$1"
local theDest="$2"
local opt=""
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
opt="-v"
fi
while read FILE
do
if [ -e "${FILE}" ]; then
local leafName=`basename "${FILE}"`
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Copying ${FILE}."
fi
/usr/bin/ditto $opt "${FILE}" "${theDest}/${leafName}" || return 1
fi
done < "${theFile}"
return 0
# Copies a list of packages (full path, destination pairs contained in the file at $1) from source to .../System/Installation/Packages/
CopyPackagesWithDestinationsFromFile()
local theFile="$1"
local opt=""
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
opt="-v"
fi
while read FILE
do
if [ -e "${FILE}" ]; then
local leafName=`basename "${FILE}"`
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Copying ${FILE}."
fi
read SUB_PATH
/usr/bin/ditto $opt "${FILE}" "${mountPoint}/Packages/${SUB_PATH}${leafName}" || return 1
fi
done < "${theFile}"
return 0
# Create an installer package in ${1} wrapping the supplied script ${2}
CreateInstallPackageForScript()
local tempDir="$1"
local scriptPath="$2"
local scriptName=`basename "${scriptPath}"`
local entryDir=`pwd`
local opt=""
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Create installer for script ${scriptName}"
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
opt="-v"
fi
fi
# shouldn't exist on entry...
if [ -e "${tempDir}/emptyDir" ]; then
/bin/rm -rf "${tempDir}/emptyDir"
fi
# make some directories to work in
/bin/mkdir $opt -p "${tempDir}/${scriptName}.pkg/Contents/Resources" || return 1
/bin/mkdir $opt "${tempDir}/emptyDir" || return 1
# Create Archive.pax.gz
cd "${tempDir}/emptyDir"
/bin/pax -w -x cpio -f "${tempDir}/${scriptName}.pkg/Contents/Archive.pax" .
/usr/bin/gzip "${tempDir}/${scriptName}.pkg/Contents/Archive.pax"
cd "${entryDir}"
# Create the Archive.bom file
/usr/bin/mkbom "${tempDir}/emptyDir/" "${tempDir}/${scriptName}.pkg/Contents/Archive.bom" || return 1
# Create the Info.plist
/bin/cat > "${tempDir}/${scriptName}.pkg/Contents/Info.plist" << END
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>CFBundleIdentifier</key>
<string>com.apple.server.SystemImageUtility.${scriptName}</string>
<key>CFBundleShortVersionString</key>
<string>1</string>
<key>IFMajorVersion</key>
<integer>1</integer>
<key>IFMinorVersion</key>
<integer>0</integer>
<key>IFPkgFlagDefaultLocation</key>
<string>/tmp</string>
<key>IFPkgFlagInstallFat</key>
<false/>
<key>IFPkgFlagIsRequired</key>
<false/>
<key>IFPkgFormatVersion</key>
<real>0.10000000149011612</real>
</dict>
</plist>
END
echo "pkmkrpkg1" > "${tempDir}/${scriptName}.pkg/Contents/PkgInfo"
echo "major: 1\nminor: 0" > "${tempDir}/${scriptName}.pkg/Contents/Resources/package_version"
# Copy the script
/bin/cp "$scriptPath" "${tempDir}/${scriptName}.pkg/Contents/Resources/postflight"
# clean up
/bin/rm -r "${tempDir}/emptyDir"
return 0
# Validate or create the requested directory
CreateOrValidatePath()
local targetDir="$1"
if [ ! -d "${targetDir}" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Creating working path at ${targetDir}"
fi
/bin/mkdir -p "${targetDir}" || return 1
fi
# If any exist, apply any user accounts
CreateUserAccounts()
# $1 volume whose local node database to modify
local count="${#userFullName[*]}"
local targetVol="${1}"
if [ $count -gt 0 ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Adding $count user account(s) to the image"
fi
for ((index=0; index<$count; index++)); do
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Adding user ${userFullName[$index]}"
fi
#lay down user here
AddLocalUser "${targetVol}" "${userFullName[$index]}" "${userUnixName[$index]}" "${userIsAdmin[$index]}" "${userPassword[$index]}" "${userPassHint[$index]}" "${userImagePath[$index]}" "${userLanguage[$index]}"
if [ $? != 0 ]; then
echo "Failed to create the User '${userUnixName[$index]}'."
return 1
fi
done
# "touch"
/usr/bin/touch "${targetVol}/private/var/db/.AppleSetupDone"
/usr/bin/touch "${targetVol}/Library/Receipts/.SetupRegComplete"
fi
# retry the hdiutil detach until we either time out or it succeeds
retry_hdiutil_detach()
local mount_point="${1}"
local tries=0
local forceAt=0
local limit=24
local opt=""
forceAt=$(($limit - 1))
while [ $tries -lt $limit ]; do
tries=$(( tries + 1 ))
/bin/sleep 5
echo "Attempting to detach the disk image again..."
/usr/bin/hdiutil detach "${mount_point}" $opt
if [ $? -ne 0 ]; then
# Dump a list of any still open files on the mountPoint
if [ "${scriptsDebugKey}" == "DEBUG" ]; then
/usr/sbin/lsof +fg "${mount_point}"
fi
if [ $tries -eq $forceAt ]; then
echo "Failed to detach disk image at '${mount_point}' normally, adding -force."
opt="-force"
fi
if [ $tries -eq $limit ]; then
echo "Failed to detach disk image at '${mount_point}'."
exit 1
fi
else
tries=$limit
fi
done
# Create the dyld shared cache files
DetachAndRemoveMount()
local theMount="${1}"
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Detaching disk image"
# Dump a list of any still open files on the mountPoint
if [ "${scriptsDebugKey}" == "DEBUG" ]; then
/usr/sbin/lsof +fg "${theMount}"
fi
fi
# Finally detach the image and dispose the mountPoint directory
/usr/bin/hdiutil detach "${theMount}" || retry_hdiutil_detach "${theMount}" || return 1
/bin/rmdir "${theMount}" || return 1
return 0
# If the pieces exist, enable remote access for the shell image
EnableRemoteAccess()
local srcVol="${1}"
local opt=""
if [ -e "${srcVol}/usr/lib/pam/pam_serialnumber.so.2" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Enabling shell image remote access support"
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
opt="-v"
fi
fi
# install some things (again which aren't part of BaseSystem) needed for remote ASR installs
/usr/bin/ditto $opt "${srcVol}/usr/lib/pam/pam_serialnumber.so.2" "${mountPoint}/usr/lib/pam/pam_serialnumber.so.2" || return 1
if [ -e "${srcVol}/usr/sbin/installer" ]; then
/usr/bin/ditto $opt "${srcVol}/usr/sbin/installer" "${mountPoint}/usr/sbin/installer" || return 1
fi
# copy the sshd config and add our keys to the end of it
if [ -e "${srcVol}/etc/sshd_config" ]; then
/bin/cat "${srcVol}/etc/sshd_config" - > "${mountPoint}/etc/sshd_config" << END
HostKey /private/var/tmp/ssh_host_key
HostKey /private/var/tmp/ssh_host_rsa_key
HostKey /private/var/tmp/ssh_host_dsa_key
END
fi
fi
return 0
# If it exists, install the sharing names and/or directory binding support to the install image
HandleNetBootClientHelper()
local tempDir="${1}"
local targetVol="${2}"
local opt=""
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
opt="-v"
fi
if [ -e "${tempDir}/bindingNames.plist" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Installing Directory Service binding information"
fi
/usr/bin/ditto $opt "${tempDir}/bindingNames.plist" "${targetVol}/etc/bindingNames.plist" || return 1
/usr/sbin/chown root:wheel "${targetVol}/etc/bindingNames.plist"
/bin/chmod 644 "${targetVol}/etc/bindingNames.plist"
fi
if [ -e "${tempDir}/sharingNames.plist" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Installing Sharing Names support"
fi
/usr/bin/ditto $opt "${tempDir}/sharingNames.plist" "${targetVol}/etc/sharingNames.plist" || return 1
/usr/sbin/chown root:wheel "${targetVol}/etc/sharingNames.plist"
/bin/chmod 644 "${targetVol}/etc/sharingNames.plist"
fi
if [ -e "${tempDir}/NetBootClientHelper" ]; then
/usr/bin/ditto $opt "${tempDir}/NetBootClientHelper" "${targetVol}/usr/sbin/NetBootClientHelper" || return 1
/usr/sbin/chown root:wheel "${targetVol}/usr/sbin/NetBootClientHelper"
/bin/chmod 555 "${targetVol}/usr/sbin/NetBootClientHelper"
/usr/bin/ditto $opt "${tempDir}/com.apple.NetBootClientHelper.plist" "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist" || return 1
/usr/sbin/chown root:wheel "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist"
/bin/chmod 644 "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist"
# finally, make sure it isn't disabled...
/usr/libexec/PlistBuddy -c "Delete :com.apple.NetBootClientHelper" "${targetVol}/var/db/launchd.db/com.apple.launchd/overrides.plist" > /dev/null 2>&1
fi
return 0
# If any exist, install configuration profiles to the install image
InstallConfigurationProfiles()
local tempDir="${1}"
local targetVol="${2}"
local profilesDir="${targetVol}/var/db/ConfigurationProfiles"
local opt=""
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
opt="-v"
fi
if [ -e "${tempDir}/configProfiles.txt" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Installing Configuration Profiles"
fi
/bin/mkdir -p "${profilesDir}/Setup" || return 1
# Make sure the perms are correct
/usr/sbin/chown root:wheel "${profilesDir}"
/bin/chmod 755 "${profilesDir}"
/usr/sbin/chown root:wheel "${profilesDir}/Setup"
/bin/chmod 755 "${profilesDir}/Setup"
/usr/bin/touch "${profilesDir}/.profilesAreInstalled"
CopyEntriesFromFileToPath "${tempDir}/configProfiles.txt" "${profilesDir}/Setup" || return 1
# Enable MCX debugging
if [ 1 == 1 ]; then
if [ -e "${targetVol}/Library/Preferences/com.apple.MCXDebug.plist" ]; then
/usr/libexec/PlistBuddy -c "Delete :debugOutput" "${targetVol}/Library/Preferences/com.apple.MCXDebug.plist" > /dev/null 2>&1
/usr/libexec/PlistBuddy -c "Delete :collateLogs" "${targetVol}/Library/Preferences/com.apple.MCXDebug.plist" > /dev/null 2>&1
fi
/usr/libexec/PlistBuddy -c "Add :debugOutput string -2" "${targetVol}/Library/Preferences/com.apple.MCXDebug.plist" > /dev/null 2>&1
/usr/libexec/PlistBuddy -c "Add :collateLogs string 1" "${targetVol}/Library/Preferences/com.apple.MCXDebug.plist" > /dev/null 2>&1
fi
fi
# Converts a list of scripts (full paths contained in the file at $1) into packages in $3
InstallScriptsFromFile()
local tempDir="${1}"
local theFile="${2}"
local targetDir="${3}"
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Converting scripts into install packages"
fi
while read FILE
do
if [ -e "${FILE}" ]; then
# make an installer package out of the script
CreateInstallPackageForScript "$tempDir" "${FILE}" || return 1
# copy the resulting package to the Packages directory
local leafName=`basename "${FILE}"`
/usr/bin/ditto $opt "${tempDir}/${leafName}.pkg" "${targetDir}/${leafName}.pkg" || return 1
# clean up
/bin/rm -r "${tempDir}/${leafName}.pkg"
fi
done < "${theFile}"
return 0
# Prepare the source by deleting stuff we don't want to copy if sourcing a volume
PostFlightDestination()
local tempDir="${1}"
local destDir="${2}"
local opt=""
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Performing post install cleanup"
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ] ; then
opt="-v"
fi
fi
# delete the DS indices to force reindexing...
if [ -e "${mountPoint}/var/db/dslocal/indices/Default/index" ]; then
/bin/rm $opt "${mountPoint}/var/db/dslocal/indices/Default/index"
fi
# detach the disk and remove the mount folder
DetachAndRemoveMount "${mountPoint}"
if [ $? != 0 ]; then
echo "Failed to detach and clean up the mount at '${mountPoint}'."
return 1
fi
echo "Correcting permissions. ${ownershipInfoKey} $destDir"
/usr/sbin/chown -R "${ownershipInfoKey}" "$destDir"
# Prepare the source by deleting stuff we don't want to copy if sourcing a volume
PreCleanSource()
local srcVol="$1"
local opt=""
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ] ; then
opt="-v"
fi
fi
if [ -e "$srcVol/private/var/vm/swapfile*" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Removing swapfiles on $1"
fi
/bin/rm $opt "$srcVol/private/var/vm/swapfile*"
fi
if [ -d "$srcVol/private/tmp" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Cleaning out /private/tmp on $1"
fi
/bin/rm -r $opt "$srcVol/private/tmp/*"
fi
if [ -d "$srcVol/private/var/tmp" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Cleaning out /private/var/tmp on $1"
fi
/bin/rm -r $opt "$srcVol/private/var/tmp/*"
fi
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Cleaning out devices and volumes on $1"
fi
if [ -d "$srcVol/Volumes" ]; then
/bin/rm -r $opt "$srcVol/Volumes/*"
fi
if [ -d "$srcVol/dev" ]; then
/bin/rm $opt "$srcVol/dev/*"
fi
if [ -d "$srcVol/private/var/run" ]; then
/bin/rm -r $opt "$srcVol/private/var/run/*"
fi
# Copy kernel and build the kext cache on the boot image
PrepareKernelAndKextCache()
local srcDir="$1"
local destDir="$2"
local opt=""
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Preparing the kernel and kext cache for t /bin/rmdir "${theMount}" || return 1
return 0
# If the pieces exist, enable remote access for the shell image
EnableRemoteAccess()
local srcVol="${1}"
local opt=""
if [ -e "${srcVol}/usr/lib/pam/pam_serialnumber.so.2" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Enabling shell image remote access support"
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
opt="-v"
fi
fi
# install some things (again which aren't part of BaseSystem) needed for remote ASR installs
/usr/bin/ditto $opt "${srcVol}/usr/lib/pam/pam_serialnumber.so.2" "${mountPoint}/usr/lib/pam/pam_serialnumber.so.2" || return 1
if [ -e "${srcVol}/usr/sbin/installer" ]; then
/usr/bin/ditto $opt "${srcVol}/usr/sbin/installer" "${mountPoint}/usr/sbin/installer" || return 1
fi
# copy the sshd config and add our keys to the end of it
if [ -e "${srcVol}/etc/sshd_config" ]; then
/bin/cat "${srcVol}/etc/sshd_config" - > "${mountPoint}/etc/sshd_config" << END
HostKey /private/var/tmp/ssh_host_key
HostKey /private/var/tmp/ssh_host_rsa_key
HostKey /private/var/tmp/ssh_host_dsa_key
END
fi
fi
return 0
# If it exists, install the sharing names and/or directory binding support to the install image
HandleNetBootClientHelper()
local tempDir="${1}"
local targetVol="${2}"
local opt=""
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
opt="-v"
fi
if [ -e "${tempDir}/bindingNames.plist" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Installing Directory Service binding information"
fi
/usr/bin/ditto $opt "${tempDir}/bindingNames.plist" "${targetVol}/etc/bindingNames.plist" || return 1
/usr/sbin/chown root:wheel "${targetVol}/etc/bindingNames.plist"
/bin/chmod 644 "${targetVol}/etc/bindingNames.plist"
fi
if [ -e "${tempDir}/sharingNames.plist" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Installing Sharing Names support"
fi
/usr/bin/ditto $opt "${tempDir}/sharingNames.plist" "${targetVol}/etc/sharingNames.plist" || return 1
/usr/sbin/chown root:wheel "${targetVol}/etc/sharingNames.plist"
/bin/chmod 644 "${targetVol}/etc/sharingNames.plist"
fi
if [ -e "${tempDir}/NetBootClientHelper" ]; then
/usr/bin/ditto $opt "${tempDir}/NetBootClientHelper" "${targetVol}/usr/sbin/NetBootClientHelper" || return 1
/usr/sbin/chown root:wheel "${targetVol}/usr/sbin/NetBootClientHelper"
/bin/chmod 555 "${targetVol}/usr/sbin/NetBootClientHelper"
/usr/bin/ditto $opt "${tempDir}/com.apple.NetBootClientHelper.plist" "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist" || return 1
/usr/sbin/chown root:wheel "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist"
/bin/chmod 644 "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist"
# finally, make sure it isn't disabled...
/usr/libexmountPoint=`mktemp -d "/tmp/mnt.XXXXXXXX"`
errExit()
echo "Execution of '`basename ${0}`' failed. Cleaning up."
# detach the disk and remove the mount folder
DetachAndRemoveMount "${mountPoint}"
/bin/rm -r "${destPath}"
exit 1
# Set up for script debugging
debug_opt=""
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ] ; then
debug_opt="-v"
fi
# Prepare the destination
CreateOrValidatePath "$destPath" || errExit
# update progress information
echo "${progressPrefix}_creatingImage_"
if [ -e "${installSource}/BaseSystem.dmg" ]; then
size=$2
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ] ; then
echo "Creating disk image (Size: $size MB)"
fi
/usr/bin/hdiutil create "$destPath/$dmgTarget" -megabytes $size -volname "${dmgVolName}" -uid 0 -gid 80 -mode 1775 -layout "SPUD" -fs "$destVolFSType" -stretch 500g -ov -puppetstrings || errExit
echo "${progressPrefix}_copyingSource_"
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ] ; then
echo "Attaching disk image"
fi
/usr/bin/hdiutil attach "${destPath}/${dmgTarget}.dmg" -owners on -nobrowse -noautoopen -mountpoint "${mountPoint}" -quiet || errExit
# Copy source Volume base system to
/usr/bin/ditto $debug_opt "${installSource}" "${mountPoint}" || errExit
else
echo "This does not appear to be a Mac OS X Install DVD."
errExit
fi
# If adding any additional packages or scripts
if [ -e "${1}/OSInstall.collection" ]; then
/usr/bin/ditto $debug_opt "${1}/OSInstall.collection" "${mountPoint}/Packages/OSInstall.collection" || errExit
/usr/sbin/chown root:wheel "${mountPoint}/Packages/OSInstall.collection"
# If adding any additional packages
if [ -e "${1}/additionalPackages.txt" ]; then
CopyPackagesWithDestinationsFromFile "${1}/additionalPackages.txt" || errExit
fi
# If adding any scripts
if [ -e "${1}/additionalScripts.txt" ]; then
InstallScriptsFromFile "${1}" "${1}/additionalScripts.txt" "${mountPoint}/Packages" || errExit
fi
fi
# If it exists, install the partition data onto the install image
ProcessAutoPartition "${1}" || errExit
# If it exists, install minstallconfig.xml (AutoInstall data) onto the install image
ProcessMinInstall "${1}" || errExit
# update progress information
echo "${progressPrefix}_buildingBooter_"
# Copy kernel and boot loader
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Preparing the kernel and boot loader for the boot image"
fi
# make sure this doesn't exist
if [ -e "${destPath}/i386" ]; then
/bin/rm -rf "${destPath}/i386"
fi
/bin/mkdir -p $debug_opt "${destPath}/i386/x86_64" || errExit
# copy these directly off the install media
/usr/bin/ditto $debug_opt "${installSource}/boot.efi" "${destPath}/i386/booter" || errExit
/usr/bin/chflags nohidden "${destPath}/i386/booter"
# Grab the relevant portion of the com.apple.Boot.plist
kernelFlags=`/usr/libexec/PlistBuddy -c "print :'Kernel Flags'" "${installSource}/Library/Preferences/SystemConfiguration/com.apple.Boot.plist"`
/usr/libexec/PlistBuddy -c "add :'Kernel Flags' string ${kernelFlags}" "${destPath}/i386/com.apple.Boot.plist" > /dev/null 2>&1
/usr/bin/ditto $debug_opt "${installSource}/System/Library/CoreServices/PlatformSupport.plist" "${destPath}/i386/PlatformSupport.plist" || errExit
# extract the kernel & kernelcache for the boot shell
/usr/bin/lipo -extract i386 "${mountPoint}/kernelcache" -output "${destPath}/i386/kernelcache" || errExit
/usr/bin/lipo -extract x86_64 "${mountPoint}/kernelcache" -output "${destPath}/i386/x86_64/kernelcache" || errExit
# Apply choice changes, if any
if [ -e "${1}/MacOSXInstaller.choiceChanges" ]; then
echo "Copy over package choice selection."
/usr/bin/ditto $debug_opt "${1}/MacOSXInstaller.choiceChanges" "${mountPoint}/Packages/Extras/MacOSXInstaller.choiceChanges"
fi
# update progress information
echo "${progressPrefix}_finishingUp_"
# perform the final cleanup
PostFlightDestination "${1}" "$destPath" || errExit
errExit
Vol/private/tmp" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Cleaning out /private/tmp on $1"
fi
/bin/rm -r $opt "$srcVol/private/tmp/*"
fi
if [ -d "$srcVol/private/var/tmp" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Cleaning out /private/var/tmp on $1"
fi
/bin/rm -r $opt "$srcVol/private/var/tmp/*"
fi
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Cleaning out devices and volumes on $1"
fi
if [ -d "$srcVol/Volumes" ]; then
/bin/rm -r $opt "$srcVol/Volumes/*"
fi
if [ -d "$srcVol/dev" ]; then
/bin/rm $opt "$srcVol/dev/*"
fi
if [ -d "$srcVol/private/var/run" ]; then
/bin/rm -r $opt "$srcVol/private/var/run/*"
fi
# Copy kernel and build the kext cache on the boot image
PrepareKernelAndKextCache()
local srcDir="$1"
local destDir="$2"
local opt=""
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Preparing the kernel and kext cache for tPERCENT:0.000000
PERCENT:4.332841
PERCENT:8.985722
PERCENT:12.358444
PERCENT:14.524864
PERCENT:16.617430
PERCENT:19.522402
PERCENT:21.614967
PERCENT:23.535204
PERCENT:26.070902
PERCENT:29.271296
PERCENT:33.111767
PERCENT:38.847858
PERCENT:42.343674
PERCENT:44.707043
PERCENT:46.578041
PERCENT:49.138355
PERCENT:51.772526
PERCENT:55.563763
PERCENT:58.567207
PERCENT:62.210735
PERCENT:64.795670
PERCENT:69.719353
PERCENT:74.741508
PERCENT:77.055641
PERCENT:79.591331
PERCENT:83.013290
PERCENT:85.548988
PERCENT:88.010834
PERCENT:91.728210
PERCENT:97.710487
PERCENT:100.000000
PERCENT:-1.000000
Finalizing disk image.
created: /Users/vm/Desktop/NetInstall of Install Mac OS X Lion/NetInstall.dmg
/bin/rmdir "${theMount}" || return 1
return 0
# If the pieces exist, enable remote access for the shell image
EnableRemoteAccess()
local srcVol="${1}"
local opt=""
if [ -e "${srcVol}/usr/lib/pam/pam_serialnumber.so.2" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Enabling shell image remote access support"
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
opt="-v"
fi
fi
# install some things (again which aren't part of BaseSystem) needed for remote ASR installs
/usr/bin/ditto $opt "${srcVol}/usr/lib/pam/pam_serialnumber.so.2" "${mountPoint}/usr/lib/pam/pam_serialnumber.so.2" || return 1
if [ -e "${srcVol}/usr/sbin/installer" ]; then
/usr/bin/ditto $opt "${srcVol}/usr/sbin/installer" "${mountPoint}/usr/sbin/installer" || return 1
fi
# copy the sshd config and add our keys to the end of it
if [ -e "${srcVol}/etc/sshd_config" ]; then
/bin/cat "${srcVol}/etc/sshd_config" - > Creating working path at /Users/vm/Desktop/NetInstall of Install Mac OS X Lion
Creating disk image (Size: 4062 MB)
/tmp/ssh_host_dsa_key
END
fi
fi
return 0
# If it exists, install the sharing names and/or directory binding support to the install image
HandleNetBootClientHelper()
local tempDir="${1}"
local targetVol="${2}"
local opt=""
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
opt="-v"
fi
if [ -e "${tempDir}/bindingNames.plist" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Installing Directory Service binding information"
fi
/usr/bin/ditto $opt "${tempDir}/bindingNames.plist" "${targetVol}/etc/bindingNames.plist" || return 1
/usr/sbin/chown root:wheel "${targetVol}/etc/bindingNames.plist"
/bin/chmod 644 "${targetVol}/etc/bindingNames.plist"
fi
if [ -e "${tempDir}/sharingNames.plist" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Installing Sharing Names support"
fi
/usr/bin/ditto $opt "${tempDir}/sharingNames.plist" "${targetVol}/etc/sharingNames.plist" || return 1
/usr/sbin/chown root:wheel "${targetVol}/etc/sharingNames.plist"
/bin/chmod 644 "${targetVol}/etc/sharingNames.plist"
fi
if [ -e "${tempDir}/NetBootClientHelper" ]; then
/usr/bin/ditto $opt "${tempDir}/NetBootClientHelper" "${targetVol}/usr/sbin/NetBootClientHelper" || return 1
/usr/sbin/chown root:wheel "${targetVol}/usr/sbin/NetBootClientHelper"
/bin/chmod 555 "${targetVol}/usr/sbin/NetBootClientHelper"
/usr/bin/ditto $opt "${tempDir}/com.apple.NetBootClientHelper.plist" "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist" || return 1
/usr/sbin/chown root:wheel "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist"
/bin/chmod 644 "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist"
# finally, make sure it isn't disabled...
/usr/libex
# update progress information
echo "${progressPrefix}_creatingImage_"
if [ -e "${installSource}/BaseSystem.dmg" ]; then
size=$2
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ] ; then
echo "Creating disk image (Size: $size MB)"
fi
/usr/bin/hdiutil create "$destPath/$dmgTarget" -megabytes $size -volname "${dmgVolName}" -uid 0 -gid 80 -mode 1775 -layout "SPUD" -fs "$destVolFSType" -stretch 500g -ov -puppetstrings || errExit
echo "${progressPrefix}_copyingSource_"
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ] ; then
echo "Attaching disk image"
fi
/usr/bin/hdiutil attach "${destPath}/${dmgTarget}.dmg" -owners on -nobrowse -noautoopen -mountpoint "${mountPoint}" -quiet || errExit
# Copy source Volume base system to
/usr/bin/ditto $debug_opt "${installSource}" "${mountPoint}" || errExit
else
echo "This does not appear to be a Mac OS X Install DVD."
errExit
fi
# If adding any additional packages or scripts
if [ -e "${1}/OSInstall.collection" ]; then
/usr/bin/ditto $debug_opt "${1}/OSInstall.collection" "${mountPoint}/Packages/OSInstall.collection" || errExit
/usr/sbin/chown root:wheel "${mountPoint}/Packages/OSInstall.collection"
# If adding any additional packages
if [ -e "${1}/additionalPackages.txt" ]; then
CopyPackagesWithDestinationsFromFile "${1}/additionalPackages.txt" || errExit
fi
# If adding any scripts
if [ -e "${1}/additionalScripts.txt" ]; then
InstallScriptsFromFile "${1}" "${1}/additionalScripts.txt" "${mountPoint}/Packages" || errExit
fi
fi
# If it exists, install the partition data onto the install image
ProcessAutoPartition "${1}" || errExit
# If it exists, install minstallconfig.xml (AutoInstall data) onto the install image
ProcessMinInstall "${1}" || errExit
# update progress information
echo "${progressPrefix}_buildingBooter_"
# Copy kernel and boot loader
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Preparing the kernel and boot loader for the boot image"
fi
# make sure this doesn't exist
if [ -e "${destPath}/i386" ]; then
/bin/rm -rf "${destPath}/i386"
fi
/bin/mkdir -p $debug_opt "${destPath}/i386/x86_64" || errExit
# copy these directly off the install media
/usr/bin/ditto $debug_opt "${installSource}/boot.efi" "${destPath}/i386/booter" || errExit
/usr/bin/chflags nohidden "${destPath}/i386/booter"
# Grab the relevant portion of the com.apple.Boot.plist
kernelFlags=`/usr/libexec/PlistBuddy -c "print :'Kernel Flags'" "${installSource}/Library/Preferences/SystemConfiguration/com.apple.Boot.plist"`
/usr/libexec/PlistBuddy -c "add :'Kernel Flags' string ${kernelFlags}" "${destPath}/i386/com.apple.Boot.plist" > /dev/null 2>&1
/usr/bin/ditto $debug_opt "${installSource}/System/Library/CoreServices/PlatformSupport.plist" "${destPath}/i386/PlatformSupport.plist" || errExit
# extract the kernel & kernelcache for the boot shell
/usr/bin/lipo -extract i386 "${mountPoint}/kernelcache" -output "${destPath}/i386/kernelcache" || errExit
/usr/bin/lipo -extract x86_64 "${mountPoint}/kernelcache" -output "${destPath}/i386/x86_64/kernelcache" || errExit
# Apply choice changes, if any
if [ -e "${1}/MacOSXInstaller.choiceChanges" ]; then
echo "Copy over package choice selection."
/usr/bin/ditto $debug_opt "${1}/MacOSXInstaller.choiceChanges" "${mountPoint}/Packages/Extras/MacOSXInstaller.choiceChanges"
fi
# update progress information
echo "${progressPrefix}_finishingUp_"
# perform the final cleanup
PostFlightDestination "${1}" "$destPath" || errExit
rrExit
# Apply choice changes, if any
if [ -e "${1}/MacOSXInstaller.choiceChanges" ]; then
echo "Copy over package choice selection."
/usr/bin/ditto $debug_opt "${1}/MacOSXInstaller.choiceChanges" "${mountPoint}/Packages/Extras/MacOSXInstaller.choiceChanges"
fi
# update progress information
echo "${progressPrefix}_finishingUp_"
# perform the final cleanup
PostFlightDestination "${1}" "$destPath" || errExit
tDestination "${1}" "$destPath" || errExit
errExit
Vol/private/tmp" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Cleaning out /private/tmp on $1"
fi
/bin/rm -r $opt "$srcVol/private/tmp/*"
fi
if [ -d "$srcVol/private/var/tmp" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Cleaning out /private/var/tmp on $1"
fi
/bin/rm -r $opt "$srcVol/private/var/tmp/*"
fi
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Cleaning out devices and volumes on $1"
fi
if [ -d "$srcVol/Volumes" ]; then
/bin/rm -r $opt "$srcVol/Volumes/*"
fi
if [ -d "$srcVol/dev" ]; then
/bin/rm $opt "$srcVol/dev/*"
fi
if [ -d "$srcVol/private/var/run" ]; then
/bin/rm -r $opt "$srcVol/private/var/run/*"
fi
# Copy kernel and build the kext cache on the boot image
PrepareKernelAndKextCache()
local srcDir="$1"
local destDir="$2"
local opt=""
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
Stopping image creation.
Terminating script!
Image creation failed. -
Windows 7 64bits Installing Internet Explorer 11 ERROR Neutral package installation failed
Hi,
The laptop is running Windows 7 64bits with Internet Explorer 10 and the Windows automatic updates is turned on. The problem happens when the Windows keeps installing the Internet Explorer 11 every time between shutdown process. So I decided to download
IE11 offline installation and try to install from it but the problem doesn't solve, the installation still does not complete. I have tried to delete all files in the Windows temp folder and IE temp folder already but the problem still exist.
Below is the details from IE11_main.log file
00:00.000:
====================================================================
00:00.000: Started: 2014/05/26 (Y/M/D) 11:00:44.473 (local)
00:00.000: Time Format in this log: MM:ss.mmm (minutes:seconds.milliseconds)
00:00.016: Command line: "C:\Users\TBG\Desktop\IE11-Windows6.1-x64-en-us.exe"
00:00.016: INFO: Setup installer for Internet Explorer: 11.0.9600.16428
00:00.016: INFO: Previous version of Internet Explorer: 10.0.9200.16866
00:00.016: INFO: Checking if iexplore.exe's current version is between 11.0.9600.0...
00:00.016: INFO: ...and 11.1.0.0...
00:00.016: INFO: Maximum version on which to run IEAK branding is: 11.1.0.0...
00:00.016: INFO: iexplore.exe version check success. Install can proceed.
00:00.016: INFO: Operating System: Windows Workstation: 6.1.7601 (Service Pack 1)
00:00.016: INFO: Trying to extract ID: SetupDownloadList.txt (0) as "SetupDownloadList.txt"
00:00.016: INFO: Trying to extract ID: HardwareBlockingList.xml (0) as "HardwareBlockingList.xml"
00:00.016: INFO: Trying to extract ID: 7006 (0) as "IE11-neutral.Extracted.cab"
00:00.702: INFO: Trying to extract ID: 5501 (1033) as "Spelling_en.msu"
00:00.702: INFO: Extracted Spelling dictionary for en to C:\Windows\TEMP\IE18CE4.tmp\Spelling_en.msu.
00:00.702: INFO: Trying to extract ID: 5502 (1033) as "Hyphenation_en.msu"
00:00.702: INFO: Extracted Hyphenation dictionary for en to
C:\Windows\TEMP\IE18CE4.tmp\Hyphenation_en.msu.
00:00.718: INFO: Trying to extract ID: 7128 (1033) as "IE11-support.cab"
00:01.607: INFO: PauseOrResumeAUThread: Successfully paused Automatic Updates.
00:02.714: INFO: Updated Download list, Hardware Blocking list, and no reboot policy files successfully downloaded
and extracted for use.
00:02.730: INFO: Launched program to check hardware: "C:\Windows\TEMP\IE18CE4.tmp\IE11-
SUPPORT\IEXPLORE.EXE" /CheckHardware "C:\Windows\TEMP\IE18CE4.tmp\IE11-support\HardwareBlockingList.xml"
00:02.870: INFO: Graphics Device Information: Intel(R) HD Graphics Family
00:02.870: INFO: Hardware support check succeeded. Installation will continue.
00:02.870: INFO: Windows 7 operating system detected.
00:02.886: INFO: Service pack major: 1
00:02.886: INFO: Service pack minor: 0
00:02.886: INFO: Service pack name: Service Pack 1
00:02.886: INFO: Version Check for (KB2834140) of C:\Windows\System32\d3d11.dll: 6.2.9200.16570 >=
6.2.9200.16570 (True)
00:02.886: INFO: Version Check for (KB2670838) of C:\Windows\System32\api-ms-win-downlevel-user32-l1-1-0.dll:
6.2.9200.16492 >= 6.2.9200.16426 (True)
00:02.886: INFO: Version Check for (KB2639308) of C:\Windows\System32\Ntoskrnl.exe: 6.1.7601.18409 >=
6.1.7601.17727 (True)
00:02.902: INFO: Version Check for (KB2533623) of C:\Windows\System32\api-ms-win-security-base-l1-1-0.dll:
6.1.7601.18229 >= 6.1.7601.17617 (True)
00:02.902: INFO: Version Check for (KB2731771) of C:\Windows\System32\conhost.exe: 6.1.7601.18229 >=
6.1.7601.17888 (True)
00:02.902: INFO: Checking for correct version of C:\Windows\Fonts\segoeui.ttf.
00:02.902: INFO: Version Check for (KB2786081) of C:\Windows\System32\taskhost.exe: 6.1.7601.18010 >=
6.1.7601.18010 (True)
00:02.902: INFO: Version Check for (KB2888049) of C:\Windows\System32\drivers\tcpip.sys: 6.1.7601.18254 >=
6.1.7601.18254 (True)
00:02.917: INFO: Version Check for (KB2882822) of C:\Windows\System32\tdh.dll: 6.1.7601.18247 >=
6.1.7601.18247 (True)
00:07.597: INFO: Waiting for 0 prerequisite downloads.
01:37.423: INFO: The neutral pack was successfully downloaded from the internet. Installation will continue using
the downloaded package.
01:37.423: INFO: Waiting for 0 language pack downloads.
01:37.423: INFO: Language pack downloads completed. (exit code = 0xffffffff (4294967295)).
01:37.438: INFO: No reboot logic message NrApiStart(0), lParam=0x03771068 returned 0x00000000.
01:38.000: INFO: No reboot logic message NrApiScan(1), lParam=0x00000001 returned 0x00000000.
01:38.000: INFO: No reboot logic message NrApiStartInstall(4), lParam=0x00000001 returned 0x00000014.
01:38.000: INFO: Installing with the downloaded package. C:\Windows\TEMP\IE18CE4.tmp\IE11-
neutral.Downloaded.cab
01:38.000: INFO: Launched package installation: C:\Windows\SysNative\dism.exe /online /add-package
/packagepath:C:\Windows\TEMP\IE18CE4.tmp\IE11-neutral.Downloaded.cab /quiet /norestart
02:20.619: INFO: Process exit code 0x80004005 (-2147467259) [Unspecified error ]
02:20.713: ERROR: Neutral package installation failed (exit code = 0x80004005 (2147500037)).
02:20.729: INFO: No reboot logic message NrApiInstallDone(7), lParam=0x00009c59 returned 0x00000000.
02:20.744: INFO: No reboot logic message NrApiStartFinish(11), lParam=0x00000000 returned 0x00000000.
02:20.775: INFO: No reboot logic message NrApiFinish(12), lParam=0x00000000 returned 0x00000016.
02:20.869: INFO: Waiting for Active Setup to complete.
02:20.963: INFO: PauseOrResumeAUThread: Successfully resumed Automatic Updates.
02:32.694: INFO: Setup exit code: 0x00009C59 (40025) - The neutral cab failed to install.
02:32.741: INFO: Scheduling upload to IE SQM server: http://sqm.microsoft.com/sqm/ie/sqmserver.dll
02:32.756: INFO: SQM Upload returned 403
02:36.453: INFO: Cleaning up temporary files in: C:\Windows\TEMP\IE18CE4.tmp
02:36.531: INFO: Unable to remove directory C:\Windows\TEMP\IE18CE4.tmp, marking for deletion on reboot.
02:36.531: INFO: Released Internet Explorer Installer Mutex
Taweesak ArchawamaitreekoolDISM.log would make this clearer. And using ProcMon I suspect would really make it snap out at you. <eg>
C.f. (credit for a recent discovery)
http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_update/i-get-error-9c59-when-updating-internet-explorer/03d4473a-867b-44a5-9a37-913e9a5879cf?page=8&msgId=afe85da0-36e0-4160-860b-d2973e78c8b9
Unfortunately, since then others have quickly stuck a pin in this balloon, finding that it is just one more bump in the road, but at least working around this coding error should change your symptom.
Good luck
Robert Aldwinckle
Thank you very much.
I have tried to create a symbolic link as suggested on a forum but the problem still cannot be solved. The error message from IE11_main.log file is exactly the same as before.
For DISM.Log, here are the details from the started time of the installtion process
2014-05-29 16:53:55, Info DISM DISM.EXE: <----- Starting Dism.exe session ----->
2014-05-29 16:53:55, Info DISM DISM.EXE:
2014-05-29 16:53:55, Info DISM DISM.EXE: Host machine information: OS Version=6.1.7601, Running architecture=amd64, Number of processors=4
2014-05-29 16:53:55, Info DISM DISM.EXE: Executing command line: C:\Windows\SysNative\dism.exe /online /add-package /packagepath:C:\Windows\TEMP\IE1CA88.tmp\IE11-neutral.Downloaded.cab
/quiet /norestart
2014-05-29 16:53:55, Info DISM DISM Provider Store: PID=9144 Getting Provider FolderManager - CDISMProviderStore::GetProvider
2014-05-29 16:53:55, Info DISM DISM Provider Store: PID=9144 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:55, Info DISM DISM Provider Store: PID=9144 Loading Provider from location C:\Windows\System32\Dism\FolderProvider.dll - CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:55, Info DISM DISM Provider Store: PID=9144 Connecting to the provider located at C:\Windows\System32\Dism\FolderProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:55, Info DISM DISM Provider Store: PID=9144 Getting Provider FolderManager - CDISMProviderStore::GetProvider
2014-05-29 16:53:55, Info DISM DISM Provider Store: PID=9144 Provider has previously been initialized. Returning the existing instance. -
CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:58, Info DISM DISM Manager: PID=9144 Successfully loaded the ImageSession at "C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583"
- CDISMManager::LoadImageSession
2014-05-29 16:53:58, Info DISM DISM Image Session: PID=8324 Instantiating the Provider Store. - CDISMImageSession::get_ProviderStore
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Initializing a provider store for the IMAGE session type. - CDISMProviderStore::Final_OnConnect
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\OSProvider.dll
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\OSProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:58, Info DISM DISM OS Provider: PID=8324 Defaulting SystemPath to C:\ - CDISMOSServiceManager::Final_OnConnect
2014-05-29 16:53:58, Info DISM DISM OS Provider: PID=8324 Defaulting Windows folder to C:\Windows - CDISMOSServiceManager::Final_OnConnect
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Attempting to initialize the logger from the Image Session. - CDISMProviderStore::Final_OnConnect
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\LogProvider.dll
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\LogProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Getting Provider OSServices - CDISMProviderStore::GetProvider
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Provider has previously been initialized. Returning the existing instance. -
CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Found and Initialized the DISM Logger. - CDISMProviderStore::Internal_InitializeLogger
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\PEProvider.dll
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:58, Warning DISM DISM Provider Store: PID=8324 Failed to Load the provider: C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\PEProvider.dll.
- CDISMProviderStore::Internal_GetProvider(hr:0x8007007e)
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Failed to get and initialize the PE Provider. Continuing by assuming that it
is not a WinPE image. - CDISMProviderStore::Final_OnConnect
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Finished initializing the Provider Map. - CDISMProviderStore::Final_OnConnect
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Provider has previously been initialized. Returning the existing instance. -
CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:58, Info DISM DISM Manager: PID=9144 Image session successfully loaded from the temporary location: C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583
- CDISMManager::CreateImageSession
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Getting Provider OSServices - CDISMProviderStore::GetProvider
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Provider has previously been initialized. Returning the existing instance. -
CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:58, Info CSI 00000001 Shim considered [l:256{128}]"\??\C:\Windows\Servicing\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
: got STATUS_OBJECT_PATH_NOT_FOUND
2014-05-29 16:53:58, Info CSI 00000002 Shim considered [l:250{125}]"\??\C:\Windows\WinSxS\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
: got STATUS_SUCCESS
2014-05-29 16:53:58, Info DISM DISM.EXE: Target image information: OS Version=6.1.7601.17592, Image architecture=amd64
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Getting the collection of providers from an image provider store type. - CDISMProviderStore::GetProviderCollection
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\CbsProvider.dll
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\CbsProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Encountered a servicing provider, performing additional servicing initializations.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:58, Info CSI 00000001 Shim considered [l:256{128}]"\??\C:\Windows\Servicing\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
: got STATUS_OBJECT_PATH_NOT_FOUND
2014-05-29 16:53:58, Info CSI 00000002 Shim considered [l:250{125}]"\??\C:\Windows\WinSxS\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
: got STATUS_SUCCESS
2014-05-29 16:53:59, Info DISM DISM Package Manager: PID=8324 Finished initializing the CbsConUI Handler. - CCbsConUIHandler::Initialize
2014-05-29 16:53:59, Info CSI 00000001 Shim considered [l:256{128}]"\??\C:\Windows\Servicing\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
: got STATUS_OBJECT_PATH_NOT_FOUND
2014-05-29 16:53:59, Info CSI 00000002 Shim considered [l:250{125}]"\??\C:\Windows\WinSxS\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
: got STATUS_SUCCESS
2014-05-29 16:53:59, Info DISM DISM Package Manager: PID=8324 CBS is being initialized for online use. More information about CBS actions can be
located at: %windir%\logs\cbs\cbs.log - CDISMPackageManager::Initialize
2014-05-29 16:53:59, Info DISM DISM Package Manager: PID=8324 Loaded servicing stack for online use only. - CDISMPackageManager::RefreshInstanceAndLock
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\MsiProvider.dll
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\MsiProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Encountered a servicing provider, performing additional servicing initializations.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\IntlProvider.dll
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\IntlProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Encountered a servicing provider, performing additional servicing initializations.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\DmiProvider.dll
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\DmiProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Encountered a servicing provider, performing additional servicing initializations.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:59, Info CSI 00000001 Shim considered [l:256{128}]"\??\C:\Windows\Servicing\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
: got STATUS_OBJECT_PATH_NOT_FOUND
2014-05-29 16:53:59, Info CSI 00000002 Shim considered [l:250{125}]"\??\C:\Windows\WinSxS\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
: got STATUS_SUCCESS
2014-05-29 16:53:59, Info DISM DISM OS Provider: PID=8324 Successfully loaded the hive. - CDISMOSServiceManager::DetermineBootDrive
2014-05-29 16:53:59, Info DISM DISM Driver Manager: PID=8324 Further logs for driver related operations can be found in the target operating system
at %WINDIR%\inf\setupapi.offline.log - CDriverManager::Initialize
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\UnattendProvider.dll
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\UnattendProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Encountered a servicing provider, performing additional servicing initializations.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\SmiProvider.dll
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\SmiProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Encountered a servicing provider, performing additional servicing initializations.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\TransmogProvider.dll
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\TransmogProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Encountered a servicing provider, performing additional servicing initializations.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Getting Provider DISM Package Manager - CDISMProviderStore::GetProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Provider has previously been initialized. Returning the existing instance. -
CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Getting Provider DISM Unattend Manager - CDISMProviderStore::GetProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Provider has previously been initialized. Returning the existing instance. -
CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info DISM DISM.EXE: Got the collection of providers. Now enumerating them to build the command table.
2014-05-29 16:53:59, Info DISM DISM.EXE: Attempting to add the commands from provider: DISM Package Manager
2014-05-29 16:53:59, Info DISM DISM.EXE: Succesfully registered commands for the provider: DISM Package Manager.
2014-05-29 16:53:59, Info DISM DISM.EXE: Attempting to add the commands from provider: OSServices
2014-05-29 16:53:59, Info DISM DISM.EXE: Attempting to add the commands from provider: MsiManager
2014-05-29 16:53:59, Info DISM DISM.EXE: Succesfully registered commands for the provider: MsiManager.
2014-05-29 16:53:59, Info DISM DISM.EXE: Attempting to add the commands from provider: IntlManager
2014-05-29 16:53:59, Info DISM DISM.EXE: Succesfully registered commands for the provider: IntlManager.
2014-05-29 16:53:59, Info DISM DISM.EXE: Attempting to add the commands from provider: DriverManager
2014-05-29 16:53:59, Info DISM DISM.EXE: Succesfully registered commands for the provider: DriverManager.
2014-05-29 16:53:59, Info DISM DISM.EXE: Attempting to add the commands from provider: DISM Unattend Manager
2014-05-29 16:53:59, Info DISM DISM.EXE: Succesfully registered commands for the provider: DISM Unattend Manager.
2014-05-29 16:53:59, Info DISM DISM.EXE: Attempting to add the commands from provider: DISM Log Provider
2014-05-29 16:53:59, Info DISM DISM.EXE: Attempting to add the commands from provider: SmiManager
2014-05-29 16:53:59, Info DISM DISM.EXE: Attempting to add the commands from provider: Edition Manager
2014-05-29 16:53:59, Info DISM DISM Transmog Provider: PID=8324 Current image session is [ONLINE] - CTransmogManager::GetMode
2014-05-29 16:53:59, Info DISM DISM.EXE: Succesfully registered commands for the provider: Edition Manager.
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Getting Provider DISM Package Manager - CDISMProviderStore::GetProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Provider has previously been initialized. Returning the existing instance. -
CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info DISM DISM Package Manager: PID=8324 Processing the top level command token(add-package). - CPackageManagerCLIHandler::Private_ValidateCmdLine
2014-05-29 16:53:59, Info DISM DISM Package Manager: PID=8324 Attempting to route to appropriate command handler. - CPackageManagerCLIHandler::ExecuteCmdLine
2014-05-29 16:53:59, Info DISM DISM Package Manager: PID=8324 Routing the command... - CPackageManagerCLIHandler::ExecuteCmdLine
2014-05-29 16:53:59, Info DISM DISM Package Manager: PID=8324 Encountered the option "packagepath" with value "C:\Windows\TEMP\IE1CA88.tmp\IE11-neutral.Downloaded.cab"
- CPackageManagerCLIHandler::Private_GetPackagesFromCommandLine
2014-05-29 16:53:59, Info DISM DISM Package Manager: PID=8324 Package Microsoft-Windows-InternetExplorer-Package-TopLevel~31bf3856ad364e35~amd64~~11.2.9600.16428
with CBS state 4(CbsInstallStateStaged) being mapped to dism state 3(DISM_INSTALL_STATE_STAGED) - CDISMPackage::LogInstallStateMapping
2014-05-29 16:53:59, Info DISM DISM Package Manager: PID=8324 Initiating Changes on Package with values: 4, 7 - CDISMPackage::Internal_ChangePackageState
2014-05-29 16:54:00, Info DISM PID=4640 Scratch directory set to 'C:\Users\TBG\AppData\Local\Temp\'. - CDISMManager::put_ScratchDir
2014-05-29 16:54:00, Info DISM PID=4640 Successfully loaded the ImageSession at "C:\Windows\System32\Dism" - CDISMManager::LoadImageSession
2014-05-29 16:54:00, Info DISM DISM Provider Store: PID=4640 Found and Initialized the DISM Logger. - CDISMProviderStore::Internal_InitializeLogger
2014-05-29 16:54:00, Info DISM DISM Provider Store: PID=4640 Failed to get and initialize the PE Provider. Continuing by assuming that it
is not a WinPE image. - CDISMProviderStore::Final_OnConnect
2014-05-29 16:54:00, Info DISM DISM Provider Store: PID=4640 Finished initializing the Provider Map. - CDISMProviderStore::Final_OnConnect
2014-05-29 16:54:00, Info DISM DISM Provider Store: PID=4640 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
2014-05-29 16:54:00, Info DISM DISM Provider Store: PID=4640 Provider has previously been initialized. Returning the existing instance. -
CDISMProviderStore::Internal_GetProvider
2014-05-29 16:54:00, Info DISM DISM Provider Store: PID=4640 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
2014-05-29 16:54:00, Info DISM DISM Provider Store: PID=4640 Provider has previously been initialized. Returning the existing instance. -
CDISMProviderStore::Internal_GetProvider
2014-05-29 16:54:00, Info DISM DISM Manager: PID=4640 Successfully created the local image session and provider store. - CDISMManager::CreateLocalImageSession
2014-05-29 16:54:00, Info DISM DISM Provider Store: PID=4640 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
2014-05-29 16:54:00, Info DISM DISM Provider Store: PID=4640 Provider has previously been initialized. Returning the existing instance. -
CDISMProviderStore::Internal_GetProvider
2014-05-29 16:54:00, Info DISM DISM.EXE:
2014-05-29 16:54:00, Info DISM DISM.EXE: <----- Starting Dism.exe session ----->
2014-05-29 16:54:00, Info DISM DISM.EXE:
2014-05-29 16:54:00, Info DISM DISM.EXE: Host machine information: OS Version=6.1.7601, Running architecture=amd64, Number of processors=4
2014-05-29 16:54:00, Info DISM DISM.EXE: Executing command line: c:\windows\sysnative\dism.exe
2014-05-29 16:54:00, Info DISM DISM Provider Store: PID=4640 Getting the collection of providers from a local provider store type. - CDISMProviderStore::GetProviderCollection
2014-05-29 16:54:00, Info DISM DISM Provider Store: PID=4640 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:54:00, Info DISM DISM Provider Store: PID=4640 Loading Provider from location C:\Windows\System32\Dism\WimProvider.dll - CDISMProviderStore::Internal_GetProvider
2014-05-29 16:54:00, Info DISM DISM Provider Store: PID=4640 Connecting to the provider located at C:\Windows\System32\Dism\WimProvider.dll. -
CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:54:00, Info DISM DISM Provider Store: PID=4640 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:54:00, Info DISM DISM Provider Store: PID=4640 Loading Provider from location C:\Windows\System32\Dism\FolderProvider.dll - CDISMProviderStore::Internal_GetProvider
2014-05-29 16:54:00, Info DISM DISM Provider Store: PID=4640 Connecting to the provider located at C:\Windows\System32\Dism\FolderProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:54:00, Info DISM DISM Provider Store: PID=4640 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:54:00, Info DISM DISM Provider Store: PID=4640 Loading Provider from location C:\Windows\System32\Dism\CompatProvider.dll - CDISMProviderStore::Internal_GetProvider
2014-05-29 16:54:00, Info DISM DISM Provider Store: PID=4640 Connecting to the provider located at C:\Windows\System32\Dism\CompatProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:54:00, Info DISM DISM.EXE: Got the collection of providers. Now enumerating them to build the command table.
2014-05-29 16:54:00, Info DISM DISM.EXE: Attempting to add the commands from provider: WimManager
2014-05-29 16:54:00, Info DISM DISM.EXE: Getting the help information collection for the provider: WimManager.
2014-05-29 16:54:00, Info DISM DISM.EXE: Registering information from the help collection from provider: WimManager.
2014-05-29 16:54:00, Info DISM DISM.EXE: Succesfully registered the Help Item with topic(wimcommands) and category(localtoplevelhelp) for the provider(WimManager).
2014-05-29 16:54:00, Info DISM DISM.EXE: Succesfully registered the Help Item with topic(cleanup-wim) and category(wimcommands) for the provider(WimManager).
2014-05-29 16:54:00, Info DISM DISM.EXE: Succesfully registered the Help Item with topic(remount-wim) and category(wimcommands) for the provider(WimManager).
2014-05-29 16:54:00, Info DISM DISM.EXE: Succesfully registered the Help Item with topic(mount-wim) and category(wimcommands) for the provider(WimManager).
2014-05-29 16:54:00, Info DISM DISM.EXE: Succesfully registered the Help Item with topic(unmount-wim) and category(wimcommands) for the provider(WimManager).
2014-05-29 16:54:00, Info DISM DISM.EXE: Succesfully registered the Help Item with topic(commit-wim) and category(wimcommands) for the provider(WimManager).
2014-05-29 16:54:00, Info DISM DISM.EXE: Succesfully registered the Help Item with topic(get-wiminfo) and category(wimcommands) for the provider(WimManager).
2014-05-29 16:54:00, Info DISM DISM.EXE: Succesfully registered the Help Item with topic(get-mountedwiminfo) and category(wimcommands) for the
provider(WimManager).
2014-05-29 16:54:00, Info DISM DISM.EXE: Attempting to add the commands from provider: FolderManager
2014-05-29 16:54:00, Info DISM DISM.EXE: Attempting to add the commands from provider: DISM Log Provider
2014-05-29 16:54:00, Info DISM DISM.EXE: Attempting to add the commands from provider: Compatibility Manager
2014-05-29 16:54:00, Info DISM DISM.EXE: Getting the help information collection for the provider: Compatibility Manager.
2014-05-29 16:54:00, Info DISM DISM.EXE: Image session has been closed. Reboot required=no.
2014-05-29 16:54:00, Info DISM DISM.EXE:
2014-05-29 16:54:00, Info DISM DISM.EXE: <----- Ending Dism.exe session ----->
Taweesak Archawamaitreekool
Maybe you are looking for
-
Could not write value vmware-tray.exe to key MSI error on Windows 8.1
Hello All, I posted the following question to Microsoft guys, but the fellow at Microsoft support was 1000% sure that this issue is related to VMWare only. I am hoping to get some assistance at least here. My question as below:- Hello All, NOTE: I
-
help
-
Access a received message after transformation
Hi, in my BPM, i am receiving an Idoc transfor it make a BAPI Call. this works fine. After this i want to transform the BAPI-response and the original IDoc to a new message for the next BAPI-Call. But i have no data in this original IDOC. I created a
-
Help!!! Upload Files using Applet.
I've built an upload application using html tag <input type="file" ...>. Both client and server's programs have been finished for a long time. However, my boss want to use applet replace html tag(due to some reasons). I want to build an applet which
-
I can't update to iOS 7.0.2 on my iPhone 4S.
I really don't know what's up with my phone. When I updated to iOS 7 I didn't get all of the new ringtones (and perhaps I'm missing other features as well). Coinsidentally, I don't have the passlock problem with my phone that was all over the news an