Portege R705-P35 has limited to no sound

My Portege R705-P35 has at best very low volume sounds.  Audio troubleshooters are unable to detect any problems.  I uninstalled and reinstalled the audio drivers, but this did not fix the problem.  My audio used to work properly, and I would like to know why it no longer works correctly.

This is the audio driver you reinstalled?
Realtek Audio Driver(v6.0.1.6083; 04-28-2010; 56.39M)
You may want to try using System Restore to restore a previous restore point from before this became an issue.
- Peter

Similar Messages

  • Portege R705-P35 BIOS release date question

    Hi Everyone,
    The CPU fan, thermal grease, and heatsink in my Portege R705-P35 were all replaced recently. Ever
    since the repair, the fan runs near 40% constantly and the CPU temperature is also constantly
    near 40%. (side: I got those numbers from Toshiba PC Health Monitor.)
    Because of some other posts, I checked to see if I had the
    latest BIOS version. As far as I can tell, the latest version is 2.20, which had a release
    date of 01/23/2012. From looking in the Registry, my laptop has version 2.20, but with a release
    date of 12/22/2011.
    Does anyone know if the discrepancy in release dates means anything?
    Thanks!
    Portege R705-P35 BIOS release date question

    Bert, I can occasionally hear the fan on my wife's machine.  On the two I use, I have never heard the fans since I've had the machines unless I put my ear right down to the keyboard directly above the fan.
    C.B.
    C.B.
    Toshiba Sat. C75D-B7260 Win 8.1 64 Bit--Toshiba Sat. L775D-S7132 Win 7 HP SP1 64 Bit and Win 10 PRO Technical Preview--Toshiba Sat. L305-S5921 Win Vista SP2 32 Bit

  • Portege R705-P35 factory HDD partition layout?

    Hi,
    I'm trying to recover a Portege R705-P35 with a 500GB HDD. Its become unbootable.
    Does anyone know the original partition configuration from the factory for this model's 500GB HDD?
    Could someone with this model take a screenshot of their Diskmanagement? I would really appreciate it.

    Here you go hope it helps.  It is disk 0 by the way the 465.76 GB Drive the 8 gb drive is the sd slot.
    Attachments:
    screen shot.png ‏53 KB

  • Portege R705-P35 Web Cam failed to initialize

    My Web camera fails to initialize. 
    (This used to work, but stopped suddenly.)  Every time I start my computer, I get the message, "Web camera initialization failed. Please check your camera device and restart application or computer."
    Portege R705-P35
    64-bit Windows 7 Home Premium
    I don't see the web camera listed in my Device Manager, either.
    Any suggestions as to how I can fix this is greatly appreciated.  I do have my Recovery disks, but I don't know how to reinstall my web cam from them.

    Reinstall the Toshiba Web Camera Application found HERE.
    C.B.
    C.B.
    Toshiba Sat. C75D-B7260 Win 8.1 64 Bit--Toshiba Sat. L775D-S7132 Win 7 HP SP1 64 Bit and Win 10 PRO Technical Preview--Toshiba Sat. L305-S5921 Win Vista SP2 32 Bit

  • Portege R705-P35 - Screen/Lid Flexes and bends - Is this normal?

    My screen/lid of the laptop bends when light pressure is applied to it.  I was curious if this was normal amongst the portege 705s.  Thanks.

    I too have a bezel issue with 2 breaks.  Looking to find parts and how to replace the bezel.  Will I need to seperate the screen from the keyboard in order to replace the bezel?
    I understand that the part number is located on the underside of the bezel probably on the lower right side of it.  Does anyone have the bezel part number for a R705-P35 Protege?

  • Toshiba Portege R705-35 Fails to detect video cam and speakers

    My Portege R705-P35 laptop has stopped detecting my video cam and speakers. I have updated the system Bios, audio (Realtek) and video drivers and recently reformated to reinstall original settings and drivers.  Nothing has worked.  The device manager does not detect the video cam or the standard speakers.  When I connect my Logitech headset through the USB port it picks up both the headset and the microphone.  Both work fine through Skype and in online videos.
    Has anyone else encountered this problem and, if so, figured out the solution? 

    My Portege R705-P35 laptop has stopped detecting my video cam and speakers. I have....recently reformated to reinstall original settings and drivers...The device manager does not detect the video cam or the standard speakers....
    This seems strange for these 2 seperate devices to both fail at the same time. You could also try a proper system reset and see if this helps bring them back.  Power off your system, unplug everything including the AC, remove the battery, press and hold down the power on button for 30 seconds, replace battery and AC, power on, when you see the Toshiba logo press the 'F2' key to enter BIOS Setup, in setup press 'F9' to load setup defaults, press 'F10' to save and exit, boot into Windows, and test your webcam and speakers again.
    But, when you say that you "recently reformated to reinstall original settings and drivers", do you mean that you performed a Toshiba Recovery to return your unit to its factory default out-of-the-box setup, as directed starting on page 60 of your User's Guide? This is considered the gold standard test on whether you have an actual hardware problem/failure or not.
    Mike

  • R705-P35 - Create Recovery Problem

    I bought a 16bg flash drive to create the recovery files for my R705-P35 laptop, but then ran into a problem.
    1.  After inserting the flash drive, and clicking "CREATE," I got the following message:
    Format failed!     (Note I had previously formatted the flash drive)
    (Error Code:  040E2D-00-00000000)
    ... then ...
    An Unexpected Error Occurred.
    (Error Code:  040EAE-57-00000000)
    ... then the following message appeared in the recovery file creator window ...
    "The creating process for all media has been cancelled."    (my emphasis)
    Any ideas or suggestions?

    Portege R705-P35
    I had previously formatted the flash drive
    I'm only guessing here.
    If you formatted it for the NTFS file system, try formatting it for FAT32.
    -Jerry

  • Portege R705 stuck in "install" of Windows update...

    Hello,
    Last night I downloaded the usual Windows updates.  Now, however. it is stuck on the blue screen and says "Installing update 4 of 23".  The circle icon has been turning on the page for hours.  Attempts to reboot by holding down the power button have been useless since it just returns right back to the ïnstalling update screen.
    Any ideas about how to get out of this screen or restart?
    Thanks!
    John in TN

    During the reboot from holding down the power button, press and hold the F8 key. On the Advanced Boot Options menu, choose Safe Mode.
    Then do a System Restore.
       What is System Restore?
    If you want to talk more, tell us which Portege R705. And what is the part number?
    -Jerry

  • Portege R705-P25 LCD Back Cover Assembly part number

    Hi all,
    I'm looking for the part number for the LCD Back Cover Assembly. The Cover hast the following code in it
    GM902984813A-D
    but I'm not able to find the right part for it. I tried to look for it in "National Parts Depot" but I need another part #, something like P000.....
    The Laptop is the following:
    Toshiba Portege R705-P25  
    Part #: PT314U-00U014
    Serial #: XXXXXXXXX
    and the LCD screen has the following part # in it:
    NRL75-EE09916A 00625D1H 4771
    Maybe one of you, or someone from Toshiba-Support can help. 
    Thank you
    [Moderator edit to remove serial number.]

    I'm sending you a PM with a little more information.
    - Peter

  • Satellite Portege R705 Screws falling out from inside computer

    I've had two screws fall out of the INTERIOR of my Satellite Protege R705.  The first one hit my right hand as I picked up the laptop off my lap.  The second one fell off today when I picked the laptop up by the top of the screen (while it was open).  I did not see this one fall but heard it hit the floor & it was exactly the same type of screw as the first one.  Again, there are not screws missing from the exterior of my computer, or the opened DVD player.  
    Has anyone else had this happen and what do I do?  My computer is physically functioning OK other than it keeps saying one of my USB ports is not working even though both USB ports do work so I've ignored that warning.

    Kathy,
    A couple things.  First, this post is a bit dated, so probably better for you to start your own thread instead of posting to an old one. 
    Also, when posting, please provide the entire model number (which the OP did not).  It is provided on the bottom of the computer and looks something like Portege R705-P40.  
    Check the bottom of the computer and look in each one of the holes to see if you can find which one is missing a screw.  If you find it, just replace the screw using a jeweler's screwdriver.  If not, it likely is not going to be an issue as the case is held together with many screws. 
    Finally, as has been posted already, never pick up your computer from the screen, as you could break one of the hinges, and they are difficult to repair.
    If your computer is working then don't wory about it losing a screw.
    L305-S5955, T9300 Intel Core 2 Duo, 4GB RAM, 60GB SSD, Win 7 Ultimate 64-bit

  • My new macbook pro has little to no sound on all video's. I've changed all the settings but it's still no loud. is there something i've missed trying?

    my new macbook pro has little to no sound on all video's. I've changed all the settings but it's still no loud. is there something i've missed trying?

    Turn off Find My iPhone in iCloud on the iDevice.
    Log out of iMessage, Facetime, remove Apple ID from iTunes & App Store.
    Use Settings > Reset > Erase All Content and Settings.
    Then set it up as a new iPhone with your own Apple ID.

  • I have a Panasonic FZ38 HD camera. I can load and view my hd movies onto iMovie with no problems via my camera or a card reader.  When I try to copy my hd videos from my old Windows pc to my new iMac, the picture speed has doubled but the sound is normal.

    I have a Panasonic DMC-FZ38 HD camera and have lots of hd movie clips stored on my old Windows Pc using Photofun software supplied by Panasonic, which I want to transfer to my new Imac computer.   I am able to copy my most recent movies that are still on the memory card from my camera onto Imovie and view them with no problems at all.  When it comes to copying my old existing hd movies stored on my Windows Pc (and which are no longer stored on a memory card), I discover that when I view them on the Imovie, the speed has doubled but the sound is normal.   In order to transfer my old movies I have copied them back  onto a memory card (SDHC - the same card as previously used) and then put the card back into my camera and then copied them onto my Imac via the camera USB.   I have also used a card reader but get the same result.     If I view the same movie through my camera, or look at it on my old pc, it plays at normal speed.    Does anyone have any ideas as to why this is happening please?

    have you read and watch the Tutorials..? :
    http://www.apple.com/ilife/tutorials/#imovie
    iM is a bit.. iffy, when it comes to the definition, what a 'camera' is. historically, only tape based machines were a movie-camera. nowadays still-cams allow movin' images too..
    but, as mentioned above: the intended workflow is: material from photo cameras (even when they move) => import via iPhoto; material from video cameras (even when they don't move.. ) => iMovie
    when the import is done, you'll notice in all iLife apps the 'media browser' - in iM09, on the very right, the icon with a camera on.. click it, presto, all (incl. your 'videos') your iPhoto Library at hand for usage in iMovie.
    watch this:
    http://www.apple.com/findouthow/movies/imovie08.html#tutorial=otherimport
    (about from midths of tutorial...)

  • HT4623 My iPad 3 has lost the speaker sound after updating to iOS 6.1, headphones are working fine

    My iPad 3 has lost the speaker sound after updating to iOS 6.1, headphones are working fine. Please help me out, done all the troubleshooting like restarting, side switcing, cleeaning the headphone jack etc.,

    Hi I also have this problem. Sound was only working on the headphones and also on the volume slider in the settings app. Everywhere else I get no sound and no volume slider. Now the headphones don't work either.
    (I'm using an ipad 2 iOS 6.1.2) 
    And NO it's not muted. I've reset all settings and restarted the iPad. Been searching forums for a couple days. Some say its a dirty docking port problem, others suggest a Skype or other app update that could be the problem.
    No volume control icon appears when I press the volume control buttons. Only says sound effects, if it says anything at all. Most often there is NO volume icon. YouTube, video, music, and other game apps, no sound.

  • 24" new, has picture but NO Sound (ps3)

    just got a new 'Model:24SL41OU' Toshiba 24" tv from best buy today.
    ive hooked up my ps3 to it and it has picture, but no sound
    i have tried
    -resetting ps3
    -unplugging tv for 10 minutes
    -have used both PS3 optical sound output and the regular red/white output. neither setting/cable works
    -went into menu setting, tried different sound settings, but nothing has worked
    i know its not my ps3 since it works on my other tv, so i have no idea whats wrong. im doubting its not a faulty TV since its new, but i have no idea how to fix this no-sound problem. really frustrating...
    anyone know how to fix it?

    What type of video connection are you using?
    - Peter

  • In app studio the Instagram connector has limitation off 20 pictures showing

    Hi,
    I noticed in app studio the Instagram connector has 
    limitation off 20 pictures showing.
    The phone app shows the last 20 Instagram pictures and not more, also when there is more
    How can arrange that I can see more pictures in my phone app made with app studio and the instagram connector?
    Or is this a hard limitation?

    Can you please show me the step on how to do that?
    I have downloaded Visual Studio Express 2013, and i open the source code that i have generated during publishing my package.
    I open "app studio.sln", and i go to App Studio > AppStudio.WindowsPhone (windows Phone 8.1) > Views > Data Templates > Section1Views.xaml
    I believe that is my page 1 in my App.  Page 2 will be "section2views.xaml".  Now my problem is i cannot open my content to edit.  I guess "Binding Content" is the place where my "words" are stored.  However,
    I cannot find get into that "item" to edit it.  may you please help me out?
    My app is
    here
    Any help would be greatly appreciated.  Thanks!

Maybe you are looking for