Portege R830 - Eco and other buttons don't work after Win7 installation
After a windows 7 reinstallation, eco, presentation buttons and the one to shutdown the trackpad doesn't work, I've reinstalled all drivers, VAP and button support program.
Could someone with a R830 tell me wich programs is link in "button support" and if they're is some options indicated?
Thanks in advance!
Why did you open new thread about one and the same theme?
http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=250988
Would recommend following one thread in order to avoid misunderstandings.
Similar Messages
-
Satellite U500-1F5: eco and FN buttons don't work after BIOS update
Hi everyone,
I hope i can find a solution for my problems in here.
I bought a new Toshiba Satellite U500 (PSU9ME),
I am updating my laptop regularly whenever i receive alert through TEMPRO or Toshiba service center.
Last week I received an alert to updat the BIOS and i did it. since then i noticed the following problems:
1. eco utility is not working, and when i tried to uninstall it it says (BIOS unsupported)
2. the on screen funtion buttons that appear on the top of the screen when you press the Fn button does not apear anymore
3. the touchpad lock and unlock button does not work and even pressing Fn+F9 doesnot lock it
I hope u can give me an answer regarding my problems,
I already downloaded the latest updates for the eco and value added packege from toshiba site and installed them,
BUT
didnt solve any of my prob
still eco utility is not working. The msg (unsupported BIOS), appear when i run the update.
The function buttons bar on the top of the screen not working ( even after i uninstall the toshiba value package and re-install the latest one) and the touch back lock/unlock button also is not working.
I hope Toshiba can find me a solution, coz I dont have the time to go the service center
Model U500-1F5 PSU9ME00D00XAR
Windows 7 (64)
Thanx in advanceHello
At first just one comment:
*I am updating my laptop regularly whenever i receive alert through TEMPRO or Toshiba service center.*
Thats nice but definitely not necessary. When the system runs well, don't touch or change anything. Maybe sounds stupid now but I recommend you to remove TEMPRO from the system. Believe me you don't need it. I have 2 years old Satellite A300 and still original BIOS. It runs perfectly and I don't want to make risk and change anything. Since last month I have Satellite U500-1EX and will do the same. Tempro is already removed and I am happy with factory settings.
All you have done is OK but at least you can try to reinstall whole OS now using HDD recovery option (F8 at start-up) to see if everything will works well again. sorry but if this will not help I think you need BIOS downgrade to old version. -
"Archive" and "View" buttons don't work after folio update
Hi all,
I have a subscription to the professional edition and I have built a custom viewer app for Android. I have built about 10 folios and at first download all is ok, the folios are displayed without problems and the app works fine except for one issue: "Archive" button don't work, when I tap on it, near folio cover, nothing happens, the folio does not disappear from folios list.
But the serious problem occurs when I perform a folio update from Folio Producer ('Update content' from adobe dashboard DPS): both "Archive" and "View" buttons stop working, nothig happens when I tap tap on them and I am forced to uninstall and reinstall the application on tablet (.apk file) to see folio changes in my custom viewer.
This is very annoying as well as time expensive.
Tablet is Samsun Galaxy Tab SII with Android 3.2.
Any help is appreciated.To the best of my knowledge, the SII is a smartphone and not a tablet device, and the official claim is (correct me if I'm wrong) that DPS on Android is corrently tablet only.
Anyway, it seems strange to me so checked and found out that even though the DPS apps are not available when you search for them in the Play Market of a smartphone you can still force load them to the phone and run them.
I've done it on both a Samsung SIII running Android 4.0.4 and a Samsung GT-I9070 running Android 2.3.6 (I currently don't have a device running Android 3.2)
The interface is so small that it's hardly possible to use it, but it works. -
Satellite A660 - touch pad on/off and other buttons don't work
Dear People on this forum,
Recently, around 3 weeks ago i opened up my computer and i cleaned it, took the dust out because it was overheating.
around 2 weeks before I noticed that my touch pad is not working and the top buttons are not working, there is no light (wireless multimedia sound buttons) I cant turn them off/on or I either don't know how. I am not sure if the problem is because I cleaned my laptop and did not connect some wires back but I am including this detail because I don't use those buttons so I did not notice if they were on. but 2 days ago I am not sure how my wireless went off ant when I press fn+f8 (wireless) it says wireless communication switch is off, which is one of the buttons that is not working (at the top next to of/on switch including with my touch pad)
I have tried the following:
windows update
turn off computer take out all wires and battery and wait for around 30min. Then hold then on button for 30s
reinstalling the flash cards support utility, hw setup and value added pack
and finally a Toshiba out of the box recovery using the 2 product recovery cd's
I am not sure what to do next. it is either:
try something else
or is there a wire is connected to both touch pad and the buttons at the top and i should open up my laptop again and connect them.
please answer as to my next step to recovering my wireless.
Your dear member of the forums, kaujis
Message was edited by: kaujisPlease dont understand me wrong but I dont know how to help you now. Notebook disassembling is for authorized people only and if you do this on your own there is always a risk that something can be done wrong or maybe damaged.
OK I must also say that I have also disassembled my machine too but I was lucky and everything is OK as before.
I dont know how A660 looks inside but the principle is always the same and I cannot imagine you have damaged anything.
You know very well that we cannot say much about your problem. What you should do now is final functionality test and install original recovery image that you got with your notebook. Test functionality with factory settings. If the problem is still there, Im afraid you must open notebook again and check if everything is connected properly.
Last option is to contact service and ask for help. -
Back button and menu button don't work after spilling beer on it. How do I fix this?
A few months ago on a night out beer was spilt on my iPod, I let it dry out and it still worked fine.
However a couple of weeks later my back button started to play up, only working some of the time I pressed it, and then stopped working all together.
My menu buttong has also recently started to play up, with me having to press it and hold it down for it to work, and this only working some of the time. Any ideas on how this can be fixed? Or even how do I send it off to be fixed? My iPod is still within its one year warranty.
Thanks in advance.Victoria ...
Click here > Apple - Support - iPod - Service FAQ -
On screen display and FN+ buttons don't work after format
I formatted my entire HDD and re-installed windows 7 pro. After doing the format and re-install the on screen display doesn't show up when I adjust volume or enable/disable caps lock like it did previously before I re-installed. I've installed the hotkey driver, on screen display, display interface driver, ran the Lenovo update utility several times, installed all windows updates. Is there somewhere where I have to enable OSD (on screen display)? I am sure this is just something small that I am overlooking but if anyone has any help please let me know! sorry if this has been posted already, I tried searching before making a post but didn't have any luck.
T400
Intel® Core™2 Duo T9400 2.53 GHz__Windows 7 Professional__3GB Memory__160GB, 7200RPM Hard Drive__14.1” WXGA+TFT-CFL__ATI Mobility Radeon™ HD 3470--
Solved!
Go to Solution.A couple other things to check:
1. look in task manager, is TPONSCR.exe and TPOSDSVC.exe running?
2. look in Services control panel, is "On Screen Display" service installed and started? -
IPad 2 Rotation, Sleep, and Volume Buttons Don't Work.
I have an iPad 2 running 7.1.1 (11D201) and just yesterday the sleep sleep and volume buttons don't work, and the screen won't rotate at all. I have already tried the following:
Switched the Lock Rotation/Mute settings in General
Power cycling it
Held the sleep and menu button to reset it (the button worked for that at least)
Done a network reset
Reset All Settings and restored from backup
Reset All Settings and restored from iCloud
Erase All Content and Settings and restored from backup
Erase All Content and Settings and restored from iCloud
If anyone has any OTHER suggestions besides what I've already tried, I am all ears. Thanks.Go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without be charged again. Also, if you have IOS-7, read this.
-
Forward and back buttons don't work in Firefox but do everywhere else.
Make sure that you set those buttons to the default action in your mouse driver software (Control Panel > Mouse or specific Intellimouse driver software).
-
I rely heavily on my earphones because well... I'm lazy but they don't work. They work on my friend's iPhone who hasn't updated yet but I've updayed and the mic and volume buttons don't work. Please make a correct update!
Nope, still same problem. I did an install, didn't work. Then I completely removed my IDT driver, restarted, installed the driver, restarted, same problem.
When I troubleshoot my audio it always asks me which one to troubleshoot. It only works if I do one of the "Speakers / HP - IDT" but I don't know why it has so many devices listed with the same name.
Also, after I troubleshoot and I can hear audio, if I go to "Manage audio devices" it still shows that no audio device is installed, which is why the webinars won't work. -
Volume and brightness buttons don't work anymore
I did a complete restore from factory DVD and since then the volume and brightness buttons don't work anymore. I have an All-in-One AE1900. Anybody can help me fix this problem? Since I do not have the original keyboard anymore, I can't use the hot key combination to do it. Thanks for your help.
I've had this same problem, but when I am using "Parallels" to run windows programs on my new Macbook Air, with an external Mac LED Cinema Display, the brightness keys on the external apple keyboard do not work. Sound seems to work fine. They work fine in Mac mode.
Any solutions? -
Iphone 4S - Wifi and bluetooth buttons don't work
Wifi and bluetooth buttons don't work in my Iphone 4S. I have tried all the suggested possible solutions, but nothing seems to work. Can anybody help?
This is the only support document there is regarding the problem. If this does not help, you would need to make an appointment at the Genius Bar. http://support.apple.com/kb/TS1559
-
Bookmarks and reading lists don't work after upgrading to ios6 on ipad
Bookmarks and reading lists don't work after upgrading to ios6 on ipad
Your bookmarks file may be corrupt. Navigate to /[UserName]/AppData/Local/Mozilla/Firefox/Profiles/[profile_name]. Either rename places.sqlite to places.sqlite.corrupt (or whatever) in case this isn't the problem, or delete places.sqlite. Start/Restart Firefox. The icons for sites that have a favicon should return after you visit each site.
-
Satellite U400: Need Vista install order and Control buttons don't work
I bought an Satellite U400-11T model with french windows Vista.
I want to change the french Vista to hungarian Vista.
Of course I bought a legal vista HUN and downloaded the drivers etc.
I am interrested in about the install order called installation instruction like at the XP models.
My second problem is; I have already installed the new Vista HUN and the 6 easy key touch buttons don't work anymore.
Where can I switch on it or wich program must i reinstall?
Thanks
SchmidHi
The installations order for Satellite U400 should be as follow:
Windows Vista SP1
Intel(R) Chipset Module
Intel(R) Robson(Intel iMSM Driver)
Intel(R) Crestline-GM / UMA Driver or AMD M82XT /M86 Driver V8.452.2
Conexant CX20561 Audio Driver
Marvell 8040/8055 LAN Driver
Synaptics Touch Pad Driver
Alps Touch Pad Driver
Conexant Modem Driver
Netwaiting
Modem Region Select Utility
Wireless LAN Driver
Chicony Camera Software
Bluetooth Stack for Windows by Toshiba
CIR Port Driver V7.1.62.2012
TOSHIBA Value Added Package
TOSHIBA Hardware Setup Utility
TOSHIBA Supervisor Password
TOSHIBA SD Memory Utilities
Authentec AES1610 Fingerprint Utility
TOSHIBA ConfigFree
TOSHIBA WPS Library
TOSHIBA Assist
TOSHIBA Speech System
TOSHIBA Extended Tiles for Windows Mobility Center
TOSHIBA Remote Control Manager
CD/DVD Drive Acoustic Silencer V2.02.00
Toshiba HDD Protection
TOSHIBA Face Recognition
TOSHIBA TRS Driver
Broadcom
HDMI Control Manager
Please do not ask me about single tools. Install all offered stuff following this list and I hope everything will work well.
Bye -
Satellite P305-S8832 - Media buttons don't work with Win7
Hello Wise Friends,
Recently I installed two brand new hard drives (500GB 7200 rpm OS/ 500GB 5400 rpm DATA) and I did a clean installation of Windows 7 Home Premium 32 bits on my 3 1/2 Toshiba Satellite P305-S8832. Everything but the media buttons is working pretty well.
I downloaded the drivers from the Toshiba repository including the Toshiba Software installer for Windows 7 and the toshiba valued package. Still those tactile buttons which are above the keyboard and between the speakers does not work, no light, no response, nothing. I have checked the bios.
These buttons work out of the box with Ubuntu Linux, Windows XP and Windows Vista.
Any advice?Hi
Generally speaking, the Multimedia buttons are controlled by VAP (value added package) and the buttons should work after the installation of VAP.
Found the drivers here:
[Satellite P305-S8832 drivers|http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=DL&os=&category=&moid=2059997& rpn=PSPC0U&modelFilter=P305-S8832&selCategory=2756709&selFamily=1073768663#]
It seems that there is also a newer version of VAP available.
Check other newer Sat P series in order to get latest VAP version.
Furthermore install the Hardware Setup. This tool lets you customize your hardware settings -
Scroll bar, back/forward buttons and home buttons don't work
I use Windows 7 and Firefox 6.0.1. The navigation buttons don't respond to mouseover and work only if the menu bar is selected.
I don't want the menu bar because it reduces screen space. How can I get those buttons to work without the menu bar?Sounds like you have a corrupt '''places.sqlite''' file or corrupt '''localstore.rdf'''. Please see these articles which explain how to resolve the problem:<br><br>
* http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox<br><br>
* http://kb.mozillazine.org/Corrupt_localstore.rdf<br><br>
If this answers your question, please click the '''Solved it''' button next to this post after you log in into the forum. This will help others searching for a solution to the same subject.
Thanks.
Maybe you are looking for
-
How to overclock my x2 3800+ with K9N Ultra
My current rig as below:- AMD X2 3800+ AM2 stock fan MSI K9N Ultra (MS-7250 v2.0 but on board stated v2.1) bios upgraded from 3.2 to 3.5 1G DDR2 667 Kingston Value Ram x 2 MSI 8600GT-Overclock edition Lite-on 20X Sata DVD-Ram Seagate Sata2 320GB WD P
-
How to delete old addresses that appear in auto complete list in iMessage
Mavericks 10.9.1 iMessage Version 8.0 (4218) MBP Late 2011 When typing in the name of a contact I want to message, a list of addresses appears as an auto-complete/auto-fill list. One address is no longer used and I would like to delete that particul
-
Help needed in installing Identity management 11.1.1.2
Hi, I have installed Oracle Webcenter and SOA suite (11g) in single domain and also installed and conten server 10.1.3.4. All in a single machine. And I want to provide LDAP Identity store for custom applications/Spaces application with content manag
-
Problem beim Export aus PP CS4 - Video Kaputt
Hey Leute! Ich habe folgendes Problem: Ich arbeite an einem Projekt in Premiere Pro CS4, mit Aufnahmen aus einer EOS 7D runtercodiert von 1080p h264 auf 720p h264. Das nur mal vorweg Ich habe so bereits einige Projekte bewältigt und erfolgreich in h2
-
How do I update my iPad to ios5, How do I update my iPad to ios5
How do I update my iPad to ios5. I have iPad 2.