Portege R930-1D0 + High speed port replicator II - dual monitor support

Hi
Running a Portege R930-1d0 through High speed port replicatior II.
Is it possible to output to dual displays?
Thanks

>So if I connect one monitor via VGA and another via display port I should get output to both monitors?
Well, usually it should be possible to use two external monitor simultaneously.
But Im not quite sure about the VGA/Display port combination because the VGA port supports analogue signal and the HDMI / Display port supports digital output.
However, it worth a check
Otherwise you could try to connect one monitor directly to the notebook and the other to port replicator.

Similar Messages

  • Does Portege R700 support new high speed Port Replicator 2 PA3916E-1PRC

    Will the new high speed Port Replicator 2 fit my R700?
    It lists it as only compatible with the R830 series.
    However the old R700 replicator works with the R830, so i kind of figured the new slimline effort would work with the R700 as well??
    Anyone tried/know this?
    Old one: PA3838D-1PRP
    New one: PA3916E-1PRC
    cheers
    Ben

    Hi
    I found an info about Toshiba Hi-Speed Port Replicator II on the Toshiba Canada website:
    http://www.toshiba.ca/web/product.grp?lg=en&section=1&group=2&product=11250
    The Toshiba Hi-Speed Port Replicator II is compatible with:
    Tecra R700, R940, R950, Portege R830, R930
    Notes:
    1. Speeds may vary
    2. Ports supported may vary with notebook model; When notebook is connected to port replicator, it is recommended not to use the ports on the notebook
    3. Dual VGA and HDMI display capability depends on notebook model
    4. Gigabit Ethernet support only if notebook supports it

  • Portege R500 - Slim port Replicator II: Dual Monitor DVI & RGB together

    Is it possible to use a dual monitor setup on a slim port replicator II if I connect one monitor to the DVI-port and the other to the RGB-port?
    I have a Toshiba Portege R500 notebook.
    TIA

    Hi
    I didnt find any information regarding the Advanced Port Replicator II but I found some info about Advanced Port Replicator III and the simultaneous usage of RGB & DVI ports
    So the point is that this is possible *BUT ONLY* if notebook system unit _itself also support_ RGB & DVI simultaneous usage.
    regards

  • Port replicator and dual displays

    Stupid question alert - if the machine stands straight up in the replicator, how do you use the display in a dual configuration?  Also, you still need toplug a USB cable in?

    Sorry can you explain what you mean if the machine stands straight up in the replicator? Also, which machine are we talking about here and the model of the port replicator?
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • T61 and port replicator with 2 monitors

    I have a T61, 6460-66U, connected to a port replicator. My laptop stays closed and out of sight. I have a Y connector going from the analog video port to each of the LCD monitors. The displays work, but they are clones of each other. I want one to be the main monitor and the other to be the extended desktop. The video card in this T61 is a Nvidia Quadtro NVS 140M. Please help!

    Guybak, welcome to the forum,
    I'm not sure it will work with a Y connector. I've never tried it so you are more than welcome to prove me wrong
    What will work is attaching one screen to the VGA and the other to the DVI on the Mini-Dock. You can then create a profile in Presentation Director where you must disable the ThinkPad screen in order for it to work. I decribed it in this thread, but unfortunately the member never came back to say it worked for them, I must presume yes.
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

  • Dual Monitor on Toshiba Hi-Speed Port Replicator II with R930

    Is there a way to get two digital HD signals to two monitors on this docking station? I currently have hdmi and vga, but obviously the vga is blurry compared to the hdmi signal.

    I don't believe that's possible.
    - Peter

  • Fan is running on high speed, no signal to the monitor!

    Hi!
    I have the following Problem with my G5:
    It worked perfectly, but suddenly yesterday, I switched it on, it began just like always to boot the system, but i had no signal to the monitor.
    After a couple of seconds the fan started to run very fast and did not stop anymore (at least for then minutes, then I switched the G5 off, because it's annoying)! I've treid it again, but the same Problem occured...
    Has anyone else already had this Problem?
    What are the reasons for this, and how can i solve this Problem?
    Cheers, Markus

    Hello Markus, and a warm welcome to the forums!
    Boot off your original G5 Install Disk while holding down Option/alt key to select AHT, then run the extended Apple Hardware Test.
    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
    Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
    3. Click the First Aid tab.
    4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
    5. Select your Mac OS X volume.
    6. Click Repair. Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot.

  • Port Replicator?

    Is there a high speed port replicator compatible with the kirabook?
    Does the "Port Replicator II" (http://us.toshiba.com/accessory/PA3916U-1PRP/) work for that particular model?
    Thanks.
    FVB
    Solved!
    Go to Solution.

    Try Dynadock on USB 3.0 instead of port replicator.
    -=: moroji :=-

  • Cannot connect 2 external monitors via port replicator using Portege Z30-16U

    Hi All
    I need hell I just moved from a other laptop to the Portege Z30-16U, I have spent hours trying to connect my 2 external monitors to my Hi-Speed Port replicator III 120W but my laptop will only see one monitor.
    I have been using 2 external monitors with my laptop for yrs as I do a lot or reading and I do not want to use only one and the laptop screen.
    I have tried VGA cables and mix of a VGA and a HDMI but nothing is working.
    Can anyone tell me how I can connect and view 2 external monitors with this laptop and port replicator, I cannot believe it is not possible it would make no sense that Toshiba would be so technilogically behind other laptop manufacturers.
    Thanks
    Liga

    Hi
    I am not familliar with the Portreplicator of Z30, but the general behaviour of the dual-displayconnector replicators is that 1 can be used.
    Not 2 simultaneously.
    I may be wrong and you should easily be able to check this - use only 1 at a time.
    First one, then the other.
    If both works when used alone, then my suspicion is right.
    Hope this helps!
    BR TOm

  • Need Advanced Port Replicator III drivers to use it with my Portege M300

    Hi,
    I have a Portege M300 with an Advanced Port Replicator III. I've had to reinstall the operating system and now can't find any drivers for the port replicator.
    Can anyone help me out? I'm running Win XP
    thanks

    Hi
    I assume you need drivers for the XP OS. Am I right???
    On the Toshiba driver page you will find all necessary drivers and utilities for Portg M300.
    There you will find also the installation instruction document. This document shows the right installation order.
    You should simply download all drivers and follow the installation order. Thats all

  • Is Advanced Port Replicator III plus compatible with Portege R200

    I just ordered a new Portege R200 and the above port-replicator... however, I note that the R200 isn't listed in the supported notebooks list for that replicator! Can anyone confirm if I have made a mistake and need to change the order?
    Will

    I have visited the Options & Accessories area on the Toshiba European site and as you already said the Portg R200 is not listed in the list of compatible notebooks.
    So I presume the Advanced Port Replicator III plus (PA3474E-1PRP) does not support the Protg R series.

  • No high-speed USB ports?

    When my I-Pod Shuffle is plugged into either of the two USB ports in the back of my computer's modem, my computer states that there is a "High Speed USB Device attached to a non high-speed hub" and that "There are no high-speed USB host controllers installed on this computer". So I take it I'm going to have to buy some sort of high-speed USB device to fit the I-Pod, but I have no earthly idea where I would buy one!

    No - you dont need a high speed port it will work fine with a 1.1 (low speed) port. It will just take a lot longer to load songs on your shuffle.
    As long as it charges (high powered port is needed - you can have high powered port which is low speed) you shoud be OK.
    If you dont like the transfer speed you can probably take out the USB card that you have and replace it with a 2.0 card - a fairly easy and relatively cheap procedure, but if you dont feel comforatble doing it ask a freind who is a bit more tech savvy.

  • Port replicator screen resolution

    I am using HP250 laptop with 2005pr usb port replicator. Using laptop stnad alone the screen is set to maximum resolution but when I attached the 2005pr the monitor res is dropped to 1280x720 max. It worked fine originally, this has only recently started to happen. I need to get the moitor res range back to matching the normal laptop screen res.

    Hi
    The max display resolution depends on the notebook (graphic card) and the external display which is connected to the Hi-Speed Port Replicator.
    The internal graphic card INTEL QM57 (built-in in Portege R700) overwiew provides this info:
    http://www.intel.com/Products/Notebook/Chipsets/QM57/qm57-overview.htm
    +This chipset supports the DisplayPort* interface with up to 2560 x 1600 resolution.+
    So you have to check the external monitor properties.

  • Enhanced USB port replicator 43R8811 and dual monitor

    I have problem with USB port replicator. I cannot put a right resolution to monitor (wide screen monitor). Replicator's settings say that I can use up to 1280x1024 resolution but monitor support i.e. 1400x1050 resolution which port replicator should support by user manual.
    If I put monitor direct to my X300 laptop I can use monitor's right resolution (1680x1050).
    Is it drivers problem or what that I cannot put a right settings?
    -Paul-

    I'm having trouble understanding your phrasing.
    The Enhanced USB Port Replicator I recently purchased supports 1440x900 and can be configured to do so.  I did have to install the drivers by downloading from the web (they were provided on a CD -- convenient since my laptop came with no CD/DVD drive :-).  Once the drivers  were installed, it happily suports 1440x900.  Did you already install the software?  Older versions of the port replicator don't support above 1280x1024, but that should not be the case with the Enhanced one.
    So you should be able to set any resolution up to 1440x900.
    Of course "1400x1050" would be a higher resolution than 1440x900, and thus not supported right?

  • IPod high speed USB

    Everytime I have plugged in my iPod to my computer, a little message comes up that says "high speed device plugged into a non high speed port". The iPod still functions, but it takes longer to load and stuff. Has anyone else had this problem? Is there a way to update my usb port to high speed? I have a pretty new computer, about one and a half years old.

    This means that you are connecting your iPod to a USB 1.1 port. It's not a problem at all... just indicating to you that your iPod is not going to perform as fast as it could, because you don't have it connected to a USB 2.0 port.
    There's no way to upgrade a USB 1.1 port to USB 2.0.
    If your computer doesn't have USB 2.0 ports, then your only options are to buy a new computer with USB 2.0 ports... or find a USB 2.0 PCMCIA adapter that will work with your computer and the iPod. There are a handful of them out there, I just don't remember which ones.

Maybe you are looking for

  • Excel service and OWA - getting ERROR while trying to open/edit Excel documents

    Hi All, We have configured SharePoint 2013 with Excel Service and OWA (Office Web Apps). After configuring, we are able to view/edit Word or PowerPoint documents from the browser (as OWA is configured). But we are getting errors while trying to open/

  • Problem about use OCFS2 install clusterware

    hi,all : i set two disk use OCFS2, one for OCR, another for voting disk,i format the two disk on rac1 ,and mout on rac1 and rac2 [root@rac2 ocfs2]# mkfs.ocfs2 -b 4K -C 32K -N 2 -L ora_votingdisk /dev/sdb1  [root@rac2 ocfs2]# mkdir /opt/votingdisk [ro

  • Change sales order - for reasons of cost management item cannot be deleted

    Hello Friends,   When I try to delete a line item from sales order below error is fired and it doesnot allows to delete the items which has a WBS element.   The function name is :BAPI_SALESORDER_CHANGE   The error message is as below:     ORDER_HEADE

  • Loader Class access .swf content

    Hi! I am having trouble accessing a MovieClip from a .swf file that I load in my main movie. I use a code similar to the one bellow, and myMovieClip is a MovieClip placed directly on the stage of my .swf file. I would apreciate a little help on this.

  • How to configure DSL set up?

    I'm using my old first generation iBook clamshell temporarily and I need to figure out how to configure it/set it up for DSL. It was configured for the ethernet system at my old university back in 2001 but I have no idea how my friend did it back the