Portege S100: How to change the RAID in the BIOS

Changing the BIOS setting for Portege S100 from JBOD to RAID0, I hit space on Exectute Creation and enter the string key in the manual and press "enter".
The settings then return to existing settings and not the new RAID0 setting I selected.
I have been at this most of the day / evening looking at various posts, but I can see nothing wrong with the details entered.
It is the same as recorded in this link:-
[How to Change the RAID configuration|http://aps2.toshiba-tro.de/kb0/TSB6901K60006R01.htm]
I am now at the end of my tether, I only wanted to install new WD HDD and do fresh install of XP Pro, is that too much to ask?

Maybe its a silly question but; did you install the second HDD in the Ultra Slim Bay?
The RAID feature is ONLY available when a second HDDD is installed in the Ultra Slim Bay.
If the second HDD has been inserted then you could change the RAID in Windows OS.
There should be a Toshiba RAID Console.
You can use this console to create or manage a RAID array.
To start the utility click Start, point to All Programs, point to Toshiba, point to RIAD and click RAID console.
Its possible to change RAID1 (mirroring) from a non-RAID configuration (default).
But note; when RAID1 is set, you cannot change your settings unless you completely restore your preinstalled software.

Similar Messages

As an update, I installed an update 5.7on my Mac laptop, now the Lightroom 5.0 has become a "Lightroom Mobile" version. How can change it back to the laptop version?

As an update, I installed an update 5.7on my Mac laptop, now the Lightroom 5.0 has become a "Lightroom Mobile" version. How can change it back to the laptop version 5.7?
Thanks for any help you can provide.

LR on your laptop is still a desktop version. It is just now able to upload to the cloud to replicate photos to either http://lightroom.adobe.com/ or an iPad that has LR Mobile installed.
I think you probably just want to change the LR 5 identity plate back so it doesn’t mention LR Mobile all the time. Hover over the identity-plate area, and click on the little triangle that appears, then choose Change Identity Plate.

How to change a setting in the Java Control Panel with command line

Hi,
I am trying to figure out how to change a setting in the Java Control Panel with command line or with a script. I want to enable "Use SSL 2.0 compatible ClientHello format"
I can't seem to find any documentation on how to change settings in the Java Control Panel via the command line
Edited by: 897133 on Nov 14, 2011 7:15 AM

OK figured it out. This is for the next person seeking the same solution.
When you click on the Java Control Panel (found in the Control panel) in any version of Windows, it first looks for a System Wide Java Configuration (found here: C:\Windows\Sun\Java\Deployment). At this point you must be wondering why you don't have this folder (C:\Windows\Sun\Java\Deployment) or why its empty. Well, for an enterprise environment, you have to create it and place something in it - it doesn't exist by default. So you'll need a script (I used Autoit) to create the directory structure and place the the two files into it. The two files are "deployment.properties" and "deployment.config".
Example: When you click on the Java Control Panel it first checks to see if this directory exists (C:\Windows\Sun\Java\Deployment) and then checks if there is a "deployment.config". If there is one it opens it and reads it. If it doesn't exist, Java creates user settings found here C:\Users\USERNAME\AppData\LocalLow\Sun\Java\Deployment on Windows 7.
__deployment.config__
It should look like this inside:
*#deployment.config*
*#Mon Nov 14 13:06:38 AST 2011*
*# The First line below specifies if this config is mandatory which is simple enough*
*# The second line just tells Java where to the properties of your Java Configuration*
*# NOTE: These java settings will be applied to each user file and will overwrite existing ones*
deployment.system.config.mandatory=True
deployment.system.config=file\:C\:/WINDOWS/Sun/Java/Deployment/deployment.properties
If you look in C:\Users\USERNAME\AppData\LocalLow\Sun\Java\Deployment on Windows 7 for example you will find "deployment.properties". You can use this as your default example and add your settings to it.
How?
Easy. If you want to add *"Use SSL 2.0 compatible ClientHello format"*
Add this line:
deployment.security.SSLv2Hello=true
Maybe you want to disable Java update (which is a big problem for enterprises)
Add these lines:
deployment.javaws.autodownload=NEVER
deployment.javaws.autodownload.locked=
Below is a basic AutoIt script you could use (It compiles the files into the executable. When you compile the script the two Java files must be in the directory you specify in the FileInstall line, which can be anything you choose. It will also create your directory structure):
#NoTrayIcon
#RequireAdmin
#Region ;**** Directives created by AutoIt3Wrapper_GUI ****
#AutoIt3Wrapper_UseX64=n
#EndRegion ;**** Directives created by AutoIt3Wrapper_GUI ****
Func _JavaConfig()
     $ConfigFile_1 = @TempDir & "\deployment.properties"
     $ConfigFile_2 = @TempDir & "\deployment.config"
     FileInstall ("D:\My Documents\Autoit\Java config\deployment.properties", $ConfigFile_1)
FileInstall ("D:\My Documents\Autoit\Java config\deployment.config", $ConfigFile_2)
     FileCopy($ConfigFile_1, @WindowsDir & "\Sun\Java\Deployment\", 9)
     FileCopy($ConfigFile_2, @WindowsDir & "\Sun\Java\Deployment\", 9)
     Sleep(10000)
     FileDelete(@TempDir & "\deployment.properties")
     FileDelete(@TempDir & "\deployment.config")
EndFunc
_JavaConfig()
Now if you have SCUP and have setup Self Cert for your organization, you just need to create a SCUP update for JRE.
Edited by: 897133 on Nov 16, 2011 4:53 AM

How to change xserve raid-card battery?

how to change xserve raid-card battery?

Xserve RAID Card Battery Replacement Instructions:
http://manuals.info.apple.com/MANUALS/0/MA277/en_US/Xserve_RAID_Card_Battery_DIY Instructions.pdf

How to change a connection with the database in Runtime?

How to change a connection with the database in Runtime?
My connection was made using ADF Business component (ApplicationModule).
ADF Swing.
JDeveloper Studio 11.1.1.4.0.

When deploying ADF applications with database connection, you should be using JDBC data sources configured in the weblogic server.
You could change the JDBC data sources to a different DB instance or location - by changing the JDBC data source and restarting the weblogic server.
For more details, check
http://techiecook.wordpress.com/2010/12/02/oracle-weblogic-adf-datasources/
Thanks,
Navaneeth

How to change Font Type of the Title Text of a JFrame?

Hi,
I want to set a different Font Type for the Title text of the titlebar of my JFrame.
Is it possible? Can anyone show me how if it is?
Thanks.
Niteen

Michael,
Thanks. It works!
But there was a problem. I was not using the :-
JFrame.setDefaultLookAndFeelDecorated(true);
so I have to use it now.
Is it possible to do it without the default decorated look and feel? Because the default LNF title bar has too much height and I am cramped for space.
I know that's no excuse. I tried but it doesn't work.. I am using a extended JFrame like this:-
class Testing extends JFrame
public Testing()
setSize(300,100);
setLocation(400,200);
Container container = getContentPane();
/* add components to this container here */
setVisible(true);
When I use getComponent() for the container, I get an ArrayIndexOutOfBound Exception.
When I set the argument to getComponent(0), the font in the title bar is not changed.
What else should I do?
Thanks.
Niteen.

How to change Apple Id for the cloud

Currently my Apple ID is an email address which I have been using for decades. In the near future the email server will be decommissioned and I will no longer be able to use it. In preparation of the change over I want to change my current email address to an icloud email address (@icloud.com). I have gone into the site to Manage Apple ID to change the email address but it won't let me as I get an error message that Apple ID must not use a domain owned by Apple. How can I change my Apple ID and Primary eMail Address to an @cloud.com account without losing all the info already on my current icloud?

First save any photo stream photos that you want to keep on your device by opening the photo stream album, tapping Edit, tap the photos, tap Share, tap Save to Camera Roll. If you are syncing Notes with iCloud, email them to yourself as you will have to recreate these after changing accounts. Finally, if you are syncing any iWork documents with iCloud go to the settings for these apps and turn iCloud sycing to Off.
Then go to Settings>iCloud, tap Delete Account, choose Keep on My iPad when prompted. (This will only delete the account from your device, not from iCloud. If your daughter is keeping the existing account her devices will not be effected by this.) Then sign back in with your new ID to create a new iCloud account, turn on your iCloud data syncing, choose Merge when prompted to upload the data to the new account. Then recreate any Notes from the emails sent earlier and turn on iCloud syncing with iWork again, if appropriate.
existing iCloud old email address with the old account. If you still want to access it on your iPad, you'll have to go to Settings>Mail,Contacts,Calendars>Add Account>iCloud and sign in with the old account ID. This email will be fetch only, not push.
Once your iPad has migrated to the new account, if you also want to move your Mac to this account go to System Preferences>iCloud, sign out, then sign in with the new ID.

How to change apple account in the ipad many times?(can't sign out)

How to change accounts!
I have multiple accounts not me but the whole family has apple accounts since we all are apples. Anyway everyone has a no credit card account except my dad. His account is synced in my sisters iPad. My dad changed the password so that we don't buy stuff the problem is we can't sign out of our dads account! I mean when we go to ipad:setting->store we already see that its already signed in my sisters account! But the problem is whenever my sister wants to update or download a free app it gives my dads email & wants us to fill the password! We already signed out!
We tried logging in via itunes store then syncing the ipad but nothing happened!
The apple retail store said after you submit the email of your ipad the only solution is to format it. But here is the big problem lets say we formatted it & after few days/months etc we wanted to buy an app we couldn't change the account to our dads account! Since we already are having trouble logging out of our dads account.
So please tell me how to change the account many times! Because I couldn't change it in the iPad nor in iTunes in my iMAC.

The apple retail store said after you submit the email of your ipad the only solution is to format it
Your iPad does not have an email address.
You will need to add a CC card to verify your account. The CC info can then be removed and the account used normally.
It would likely be easier to simply update the apps on the computer then sync the iPad.
iTunes can be authorized for all accounts then all apps can be updated at once.

How to change what search engine the adress bar uses when typing in a search to something that isn't Google

I currently left all Google services I used, Gmail, Chrome, etc.. because of the recent selling info to the gov and what not and although it may or may not be true I am being safe and switched to Firefox and a different email provider. Anyway so far I like Firefox I am using DuckDuckGo as my current default search and I would like to use it as my search engine when I type in a search in the address bar, by default it's Google how do I change it to a search provider I want to like DuckDuckGo?

Hello,
If you have installed DuckDuckGo on Firefox, you can follow these steps:
# Type '''about:config''' in the address bar.
# A warning appears, click "I'll be careful, I promise!"
# Type '''browser.search.defaultEngine''' in the search box at the top of the page.
# Double-click the item that appears.
# Set the value to '''DuckDuckGo''' or whatever search engine that you would like to use (case sensitive I think).
(I have attached a screenshot).

How to Change Date Format in the Title of the report.

Hi Everyone,
I want to change the Format of the Date in the title(Query run Date)taken by report through the variable "&Date" .
The Format available is DD-MON-YY
Desired Format is DD-MON-YYYY.
Please let me know the same as early as possible.

Hi NP,
What I try to do is to reformat the default &date inserted into the Title for Discovere Plus and Viewer. When you edit the Title for the report, you can select the date from the Insert dropdown list to display the date when the report was run. The Date (shown &Date in the Title) has a default format of DD-MON-YY. As I have other date parameters displyed in the Title that have the format of DD-MON-YYYY specified by the user, I want to have the &Data in the same format. Please advise me how to achieve this.
Thank yiou very much,
J.K.

How to change at run-time the type of a step?

Hi,
How topic title, i need to know how change at run-time the type of a step. I have, i my sub-sequence, a step whose type must change at run-time based upon the occurrence of a condition. How can do it?
Thanks.

I need to do this: At verify of a condition, one specific step at the end of sequence must change from statement to numeric limit test and viceversa.
However, is right to no writing self-modifyinf sequence unless handle rece condition on step that i want change at run-time.
Moreover i ask myself: If for change the type of a step i need first delete the substep and later create a new one relative to the step that I want, then it is better and make more sense to create dynamically the step that i would like to have depending on the condition that occurs, right?
Thanks

Can someone tell me how to change obj file in the applet

Thanks in advance.
I have try to use the ObjLoad example in the java3d demo to
change the obj file.But I fail to do this.
I had use twe applet,one to change name,and then refresh the other
frame to try to relod th obj file. but
java.lang.NullPointerException
at ObjLoad.init(ObjLoad.java:150)
at sun.applet.AppletPanel.run(AppletPanel.java:348)
at java.lang.Thread.run(Thread.java:536)
can you help me?
thanks

Sun's Java3d FlyThrough Demo & Java3d Scenegraph Editor
allow you to load mutiple 3d files (sequencially) including VRML
files with the Sun VRML Loaders at run-time
-- and the Java Source Code is free --- ( see below )
First, try a Web Demo of the "Appearance Explorer" :
"Appearance Explorer" Java3d Web Applet, Loads multiple ".obj"
http://web3dbooks.com/java3d/jumpstart/AppearanceExplorer.html
- click on "Data"
- click on "Obj File: Galleon" -- or -- "Obj File: Beethoven"
- rinse, rather, repeat.
|
http://web3dbooks.com/java3d/jumpstart/Java3DExplorer.html
http://web3dbooks.com/java3d/jumpstart/J3DJumpStart.zip
| ^-- free source code
|
http://www.frontiernet.net/~imaging/games_with_java3d.html
| Sun's Java3d Scenegraph Editor showing a Nasa VRML model
| --------------------------------------------------------
|
| uses the Sun VRML Loaders, source code available and is free.
|
| [ at this url: ] http://java3d.netbeans.org/j3deditor_intro.html
|
http://www.frontiernet.net/~imaging/terrain_rendering.html#Scenegraph_Editor
http://www.frontiernet.net/~imaging/terrain_rendering.html
Selman wrote a Java3d book that was well received
and has a Swingtest.java applet and application that
allows you to load objects dynamically,
ie. "change" the viewed object when it is running by
allowing the user to select "sphere" or "cube" from
menu lists ( in this case it's not just displaying
Jav3d primative objects, but it has the core functionality
of deleteing and adding nodes in the scene graph that you
are seeking, and at that point the rest is left as
exercise to the student. The ObjLoad.java in Sun's Demos
directory has the code to load ".obj" files, so you have
all the tools you need.
| Picking of VRML objects with your mouse is demonstrated
| in a new book, Java 3D Programming, by Daniel Selman
| ( shown on the left ).
|
| The source code is avaible for free.
|
| [ here: ] http://www.manning.com/selman/selman_source.zip
|
| This new book uses the old, reliable Sun VRML Loaders for Java3d.
|
| The program reads a 3d scene as a simple VRML text file,
| and displays the Java3d Scene Graph ( which is interactive,
| you can expand and collapse the branches of the scenegraph
| and examine the contents of the nodes ), it renders the
| 3d scene, and when you click on an object it tells you
| what you clicked on.
|
| You can see ( and download ) the Java Source code of
| the operative file: VrmlPickingTest.java
|
| The publisher's site has more informatation on the book.
|
http://www.frontiernet.net/~imaging/games_with_java3d.html
http://www.frontiernet.net/~imaging/sourcecode/VrmlPickingTest.java
The Prentice-Hall books by Aaron Walsh are false & fraudulent
in their claims to present the most current methods, as a part
of the "Couch-Beiter Flame War" and fraud involving Sandy Ressler
at the NIST. Prentice-Hall, Yumetech.com and Aaron Walsh have
misrepresented and disparaged the old & reliable Sun VRML Loaders
in favor of the "new" Yumetech.com Loader, and the web demo above
__ DOES NOT __ load Web3d.org's __ VRML __ files, only the less
capable ".obj" files ... so the "Web3d" series of books from Prentice-Hall
does not show the loading of ___ Web3d.org 's ___ VRML __ files
because Sun's VRML Loaders were the best ones, and the Yumetech.com
folks didn't want anyone using those, and started the "Couch-Beitler Flame War"
to disparage, falsely & fraudulently misrepresent the facts and knowingly
published false and misleading "disinformation" in the
unreliable Prentice-Hall / Pearson Ed books, harming our community.
The Sun VRML Loaders are used by __ Nasa, __
the NSF supported Virtual Chemistry Lab ( "Lab3d" ),
me, and others simply choosing the "what works best",
and by people using Sun's Java3d FlyThrough & Java Scenegraph Editor.
symsan wrote:
|
| Thanks a lot,but can you give some code
| about to change the Obj file or vrml file,
| when the user in the browser to choose
| the file or input to the textField ?
|
I misunderstood the original question ( it was too terse ).
I interpreted the question has how to change the loaded
objects --- between successive runs of the program ---
and not as you intended -- dynamicall while running
the program program without quiting & restarting.
In a "Java3d" forum I'm not going to wander into
how basic ( non-Java3d) 2d commonents such as TextFields
are programmed.
The original Vrml97Player.java file that came with
Sun VRML Loaders also implemented the functionality
of loading mulitiple files ( sequentically during one run )
and I have worked with that and similar things with
the Shout3d.com engine and my own 3d Java engines.
-- Paul, Java Developer & Web Animator
Imaging the Imagined: Modeling with Math & a Keyboard

How to change Tray selection in the middle of overflowing sections

We have situation where we have a form and the first page, an invoice, prints on perf paper, tray 1. The second page consist of repeating sections and needs to start on the back side of the perf paper, but when it ejects to a new page due to overlow, we want that new page to print from a different tray.
We looked at the Rule < OverflowPaperTray >, but that only seems to work for the start of the repeating sections forcing all of it to start on a new sheet. But our customers don't want that.
Is there any way to tell Documaker to pull from a different tray when the repeating sections overflow on to a new sheet?

The first printable section on the page determines certain attributes about your layout including the tray and duplex selections. It is important to note that "printable" does not necessarily mean there is anything on the section that actually prints. Therefore, you could have two dummy/placeholder sections at the top of your form - with no size or content. Specify them as headers and copy on overflow. Have the first one specify tray 1 and the second tray 2 (your trays may vary) along with the other page attributes that are important. You will need to specify recipients and triggers (if needed) for the sections - just like any section that you expect to print.
Once pagination occurs those two headers will copy on overflow to the newly paginated pages.
Use a PostTransDAL rule in your AFGJOB that runs a script that essentially does the following.
while( HaveImage( "MyTray1Section\3", "MyForm") )
DelImage("MyTray1Section\3", "MyForm")
wend
Of course, you want to use your actual names for the tray controlling section and the form that contains it. Since you know that your form is duplex and that you only need 2 occurrences of the section, the \3 designated on your section name means to find the 3rd occurrence of the section on the named form. You keep checking and deleting the 3rd occurrence until there are no more. At that point, your first sheet will have the necessary tray defined, but all succeeding sheets will now have what was your "second" tray controlling section now in charge and will print on a different tray.
(It may be important to note that the \3 does not mean "third page" it means 3rd occurrence. Technically, you can have multiple occurrences of the same section on a single page and this is how you would reference them separately. That is why you don't change the \3 occurrence between deletes. Although technically you are referencing the same section name, you are always looking for the 3rd occurrence to delete. Once they are gone, then only your first sheet will have the necessary section at the top.)

Satellite S3000: how to change a component on the motherboard?

How do you open the case of this laptop/notebook?
I need to change a component on the motherboard.
I get to the stage where all the screws on the base are off, and it seems like all that remains for access into the casing for the 'system board' motherboard is that MAYBE the strip on the front, just below the screen, should be removed.
Is this so? What do I need to do at this stage?
It's urgent that I get to do this in the next few hours.

I dont know what components you want to change on the motherboard but I dont think that its a good idea. :O
However, I dont think that you will find any officials manual how to do anything on this unit. I think only the service partner can receive such documents.
I have found in the net this site:
http://www.irisvista.com/tech/laptops/Toshiba-Satellite-1200/take-apart-laptop-1.htm
It describes how to open and remove all parts from the Satellite 1200. I know its not a Sat 3000 but you can detect roughly how to do it.
But you know if you have not experience you shouldnt do or remove anything ;)

How to change page type after the fact

In the application builder, I click on an application and choose Details in View.
I get the list of pages I have in my app.
The page type column has:
Interactive Report
Navigation Form
Dynamic HTML
DML Form
Chart
Report
How do I change this column after a page has long been created?
Specifically, I want to the change "Dynamic HTML" to something else.
Why?
Because on this particular page, tabs do not work (error: page not found).
Buttons created among a regions items do not work (same error, page not found).
I need to use tab and buttons to go from this page to other pages.
And I am suspecting the page type may have something to do with my problem.
Thanks in advance for any pointers.

Thanks for your consideration!
For my current app, a clinical management system,
I'd like to have, say, 1000 items.
(For other applications I am thinking about, but have no time,
nor expertise for now, I'd need millions of items,
each corresponding to a pixel of a graphic.)
Who cares if the current computers are too slow?
How about make it a parameter that can be changed
per app or per apex installation, and default to 100?
Some forms can be broken up logically, as people have helpfully suggested,
and I did follow that advise on some pages.
But other forms cannot be. People have put a lot of thought on designing
those forms, they are government or legal standards (or at least something more important
than computer performance), and people have been trained
with those original forms.
Consider the hoops I have to jump through to get more than 100 items
on a page I am currently working on:
Generate the items (INPUT type="text" and INPUT type="checkbox") using PLSQL
lots of htp.p('<INPUT ...>').
a JavaScript function to collect all the values on the page
and make up an XML string. submits this string to an application
process, and application process parses the XML string and does insert or update.
Another JavaScript to populate the items based on the current values of a row,
using an application process to retrieve the columns of a row.
There are about 150 items on this particular page.
All these are ok, because I was aware of the restriction of 100.
And because I wanted to generate my own HTML to mimic the original
form anyway.
Then things started to go weird.
I need buttons to go back to another page. and I use tabs.
Buttons to go back from this page,
when a button is created with "Create a button in a region position",
it works fine.
When a button is created with "Create a button displayed among this region's items",
it does not work, and I get HTTP 404, https://.../apex/wwv_flow.accept, page cannot be found.
But I need a button to work like the one created with "Create a button in a region position",
but displayed like the one created with "Create a button displayed among this region's items".
This is still not too bad. I saw the difference between the two kinds of buttons.
I copied the HTML code for the button "Create a button in a region position",
and used a display only item to create a Back button where I wanted:
'<table class="t15Button" cellspacing="0" cellpadding="0" border="0"><tr><td class="t15L"><img src="/i/themes/theme_15/button-l.gif"/></td>'||
'<td class="t15C">Back</td>'||
'<td class="t15R"><img src="/i/themes/theme_15/button-r.gif"/></td></tr></table>'
Here P145_BACK holds the page number to which I want this page to go back to.
Then I noticed that the tabs did not work any more. same error, page not found.
That's is when I got a little frustrated and posted for help on the forum.
Then I begin to undo my steps, and
by lucky accident, I noticed that, if none of the checkboxes is checked,
the tabs work fine. If at least one is checked, I get this error, page not found.
My current solution is to add a function of my own in the doSubmit(B) function in file apex_3_1.js,
which unchecks all checkboxes (o.checked=false).
And now, from this page of about 150 items,
the tabs are ok, and I have a button that is similar to one
created with "Create a button displayed among this region's items", except I created myself
using HTML.
I think this trick of using a custom function in doSubmit(), that unchecks or even hides
INPUT type="text" items (o_div.style.visibility = "hidden"; o_div.style.display = "none";)
should work in general. this function is only invoked when the user clicks the tab,
or buttons among a region's items.
Somebody said regarding restrictions on drugs or sex.....
you will not make people stop, you just make it harder or more expensive.
Same here and many other things, a restriction is just making things harder.
People will try to get around it.
Now that I have a solution, and I am aware of the problem, I'll calm down and
go back to my own thing for now.

Portege S100: How to change the RAID in the BIOS

Similar Messages

Maybe you are looking for