Portege Z930-118 wont start after BIOS update

my PORTG Z930-118 failover and wont start after i upgrading in middle of upgrade i remove power and press shutdown bottom after that i see the power and wireless but screen still black ?
Any help please

Hmmmm.... BIOS upgrade interruption has screwed up BIOS and thats the reason why your notebook doesn't start properly. BIOS is damaged now.
In such case you need professional help by authorized Toshiba service provider.
On this forum you can find many threads about similar problems. Some people have tried to fix this alone and if you are interested to read how one other forum user has fixed it check please this thread.
Ayway, you can contact nearest Toshiba service, explain the situation and ask for help.

Similar Messages

MSI Z87-G45 Gaming- computer wont start after bios update

Hello!
I just updated my bios to 1.6 --> computer wont start now but the fans are spinning, and the power led are black...
I took out the cmos battery for 30 min and shortened the JBAT1..
Can someone help me?

Well, as the G45 does not offer a backup bios your board seems to be bricked. You can try the recovery tips here: https://forum-en.msi.com/index.php?topic=174985.0
If no help rma it.

Satellite Pro C850 wont work after Bios update

my satellite pro c850 cd wont work after bios update from toshiba.
what do i do?

Saying: dont work you mean it does not power up or what do you mean exactly?
Did you flash the BIOS properly?
Possibly something went wrong during the update and this means that ROM module isnt flashed properly
In most cases a special BIOS crisis disk would be needed to get it working
Not quite sure if you can get it fixed by your own
Check this thread. Maybe it helps:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=59637
Otherwise you need help from authorized service provider available in your country.

Pavilion g6t wont boot after bios update now just black screen please help!

I downloaded an update for the bios for my pavilion g6t-1d00 laptop running windows 7 64 bit. It started acting kind of funny but I didnt think anything of it til I tried to boot it up the next day and all I got was a black screen and a orange led light on the f12 button for the internet and the caps lock button after blinking afew times started the dredded two times every couple of seconds. I tried the windows key+B key power key, no luck. I cant access anything because I have no monitor and I'm at my wits end. I refuse to wipe my hard drive and start over even if I could! I cant access hp tools or manager or anything, please someone has to have a solution!

@Fuschia4me,
1.       You will have to use another computer
2.       Access the HP.com site with the BIOS updates available here is the link
3.       You want to select the F.36 BIOS version
4.       When you click on the update then click download and it will ask you to save or run, you want to save to a flash drive
5.       Once done insert the flash drive into your laptop
6.       Turn the computer on and press the windows and B key like before
If the process doesn’t work the first time I would try at least 2 more times.
Please respond back at your earliest convenience.
Thanks
Clicking the White Kudos star on the left is a way to say Thanks!
Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

X301 won't start after BIOS update

Hi all:
Well I've had my new x301 for about 2 months and it's given me nothing but troubles....Recently I found out my laptop won't come back on from hibernation (when you close the screen and open it up). So I downloaded and installed the lastest updates from Lenovo (including the recent BIOS update), restart computer, only to find out it doesn't start up anymore...black screen, thinkadvantage blue botton doesn't light up, no harddrive activity, only light on is battery and power...
I'm thinking maybe something went wrong with the BIOS update. Is there anything I can do to fix it (besides shipping this thing to a repair center which is a big hassle, or paying $200 for an on-site tech that might or might not solve the problem).
Any help is appreciated.

Hello all
I just updated my X301 (2776LEG) with the 3.12-1.05 bios. Now my laptop won't start up when running on battery, it powers on for a short while and powers off again. This cycling keeps on going (after 30min I switched it off!) but as soon as i connect the power adapter it boots fine. Seems like this bios update f****ed up the battery power part of the computer....
I tried the bios battery trick but it only worked on the first boot and after that the same problem is present.
I have added 2gigs extra memory and a ultrabay battery and it has been working 100% for about a year now. This error started right after the bios update...
Thought that a reflash of the bios would solve the problem but i cannot reflash the bios with the same bios version...
Any ideas ?
Kind regards
Tommy

Laptop wont boot after BIOS update

Hello
i have a compaq CQ61-303SV laptop
i tried to update the BIOS and i download the file form the hp driver and support website
after i update the BIOS the laptop wont to boot and stop on a black screen
what to do please ...

Power down the notebook, disconnect AC adapter and remove the Battery, hold the power button down for a full 30 seconds, connect AC only, hit the power button and see if windows will load.

MOVED: Comp won't start after BIOS Update

This topic has been moved to BIOS.
https://forum-en.msi.com/index.php?topic=118639.0

Hello all
I just updated my X301 (2776LEG) with the 3.12-1.05 bios. Now my laptop won't start up when running on battery, it powers on for a short while and powers off again. This cycling keeps on going (after 30min I switched it off!) but as soon as i connect the power adapter it boots fine. Seems like this bios update f****ed up the battery power part of the computer....
I tried the bios battery trick but it only worked on the first boot and after that the same problem is present.
I have added 2gigs extra memory and a ultrabay battery and it has been working 100% for about a year now. This error started right after the bios update...
Thought that a reflash of the bios would solve the problem but i cannot reflash the bios with the same bios version...
Any ideas ?
Kind regards
Tommy

Stuck at windows starting after bios update boot

Model: Satelitte P755-S5120
Part NO: PSAY1U-OVD026
OS: Windows 7 Home Premium 64 bit
I get stuck at starting windows everytime I restart my computer. This happened right after I installed a bios update and rebooted my computer to finish it. I could never get back in.
I tried running diagnostics but it didn't seem to find any errors. I tried restarting it in safe mode and all other modes but I keep getting stuck at starting windows.
Funny thing is when I restart my computer on safe modes, I could see the files loading and on all of them it always stopped on \windows\system32\drivers\CLASSPNP.SYS
Maybe that file is corrupted, I have no idea.
Also tried repairing, and after it loads window files it goes into a black screen and it stays there, nothing happens. I let it run for an hour or so.
So any ideas? I'm not a computer guy so I don't know what else to do. Please help.

If you didn't burn a repair disc, download one from here. Scroll down to Windows 7 System Repair Disc 64-bit.
Create a Windows 7 System Repair Disc
Use it to boot to the Windows Recovery Environment.
Try the Startup Repair from there. Sometimes it takes several times.
Also, run this disk check at a command prompt. It may take a long time.
chkdsk c: /r
Then try Startup Repair again.
-Jerry

Pavilion m9500y wont boot after bios update

Hello Everyone,
I have a m9500y desktop that I recently did a bios update on. The update seemed to go through just fine but then when it rebooted it ended up beeping a few times and showed only a black screen. I removed the power cord and cmos battery and tried to power on after putting them back. It came back to the boot screen and hitting f10, it says "Entering Setup" and a flashing cursor, but doesn't get passed that. Is there a way to get into some recovery mode and reflash the bios again?
Thank you in advance for any help.

Hi,
There is one HP BIOS update available for your PC when using Win Vista 64 bit.
Is this the update that has failed? Did you attempt this BIOS update running a different version of Windows?
It may be possible to mod the BIOS update per above and flash again. Another option is to have HP reflash your PC's BIOS. The cost to have HP fix may not be worth it given your PC's introduction date in 2008.
This site may provide some help. Check out BIOS Recovery. Current HP PC's use AMI BIOS. Your PC may have an Award BIOS.
Or you could contact a local PC tech for assistance. The tech may be able to reflash the BIOS at a lower cost.
There is no easy fix for this problem.
Jaco
****I am not an HP employee****
Please give a" Kudos, Thumbs Up" if advice received is relevant or" Accept as Solution" to assist other forum users having a similar problem.
Errare humanum est.

Notebook does not start after BIOS Update crash

Hi all,
I just want to ask whether is a chance to reactivate my Satellite A300 after a BISO update crash without send it to the Toshiba service.
I downloaded the new BISO and started it from the Windows menu. After a few seconds my PC crashed and everything was frozen.
I switched off the PC.
Now when I press the power button to start the Notebook the monitor is black and I can hear a sound brrr, brrr, brrr from the CD-Rom drive.
Do you think it is possible to boot from a CD or something like that. Is it possible to reactivate my notebook?
Your help would be really appreciated!
Thanks a lot
Best regards,
Chotte

Sorry but if the BIOS chip is damaged there is no much you can do about it. You must contact authorized Toshiba service provider.

Satellite A100 - Windows and BIOS doesn't start after BIOS update

Hello, I have updatet BIOS of my notebook sattelite A100.
After updating I cannot start my notebook and BIOS doesn't start.

Hey guys... I tried to update my girlfriend's BIOS on a A100 just now (the windows installer) and the procedure stoped in the middle because windows crashed while doing. Now the laptop won't start at all (obviously). I have a black screen when turning it on. No boot sounds or anything. I've already removed the AC power source and battery in case that works. I guess removing the BIOS battery won't help either since the flashing was wrong... In case that doesn't work, is there any chance i could find a BIOS from ebay or somewhere else?
Thx in advance, Jimmy..
PS. My gf is going to shoot my brains out :P

Toshiba P755-S5270 Won't start after BIOS update failure

I was informed by Toshiba Service Station that I needed to update my BIOS. During the update, my laptop froze. After powering down it would not start again (Black Screen) the power comes on but nothing else.
Any ideas?

I understand if I would have just decided that I would change the BIOS for no good reason, I have what's coming to me, BUT when Toshiba's program "Service Station" that came loaded on my laptop, says that I need to update and I use Toshiba's program "Service Station" to do just that... and it fails... one might think that the program is to blame.
If this Update was suggested by anything other than an approved program that came loaded on the laptop, I wouldn't have done it.
What really irks me is that I've owned this laptop for one year to the day and my warranty just expired!
Oh Well... Lesson Learned.

Hp compaq 6510b won't start after BIOS update

hello
when I power on my laptop HP compaq 6510b it DISPLAYS this message :your bios failed to complete the update 6510b.after flashing the bios the laptop won't start .it displays the same message (your bios failed to complete the update 6510b) and turns off.I can't access the bios by pressing F10.the bios version was F16 and flash it by F20 .need help thank u very much.
This question was solved.
View Solution.

I extracted BIOS softpaq sp55553. It is BIOS version F.20. It had the .SIG file inside when extracted using WinZip. You do not need to make a bootable usb flashdrive. Just put the files at the root of a FAT32 formatted usb thumbdrive, plug it into a usb 2.0 port. Hold the Win + B keys down and press the power button. Continue holding the keys down until the notebook reacts. It usually takes a bit longer than 15 seconds to respond and begin the BIOS recovery.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Equium A60 does not start after BIOS update

I have an Equium A60. After being caught with some very nasty malware and a trojan I made the disiccion to reformat the machine and reinstall the o.s..
All went well until I updated the bios. Machine crashed and now I cannot get it to reboot. Press the power button and the machine will start for 3-4 seconds and then shuts down.
I know this is due to the bios and want to know if there is any way that i can reset this back to it original settings?
thanks in advance for your help

Hi Rob.
The model of my laptop is EA60-152 / PSA67E.
Yes i did upgrade from the Toshiba website.
I should have never done this it was working after the reinstall of the o.s and so i should not have tried anything else(never fix something that aint broke).
The only place i have found for a new motherboard is Toshiba. But the price is nasty. Talk about what a fool am i.
Never mind though i keep on thinking that there may be an answer or a scrap one that i can rob a bios chip from. Other than that a very nice paperweight me thinks..!!!!
If i get an answer than i will post it here..

Z50-75, wont boot after bios update

Hi to all!
I just baught Z50-75 with AMD FX7500, 8GB Ram and FreeDOS. I installed Windows 8.1 Pro, and they pulled some drivers during the installation, and I went to Lenovo sight and downloaded all the rest (graphics, camera, etc.), after each installation the computer restarted normally and all was O.K. The last drivers that I saw on the site were BIOS drivers, and I downloaded those to and it started the installation after which it said:"The system will now restart for changes to make effect", and it did, but, it would not boot up after that, all it did was show me this on the screen:
And I tried both of the options (the second one with the Windows CD inside), but it just stays where it is, no effect.
I can enter the bios and change the settings, but none of them seem to work because this is the maximum where it will go, the only difference is when I change from AHCI to Compatible mode, it restarts and than I have a blank screen, I have to use the One button Recovery to get back to this one from the picture above...
I would appriciate any kond of help, please give me some advice.
Solved!
Go to Solution.

Someone else posted about a similar problem. I will give you the link to their post and you can decide if it is something you want to try.
http://forums.lenovo.com/t5/Windows-8-and-8-1/black-screen-after-2-reboot/td-p/1738899
Hoov
Microsoft MVP - Consumer Security
SpywareHammer.com

Portege Z930-118 wont start after BIOS update

Similar Messages

Maybe you are looking for